summaryrefslogtreecommitdiffstats
path: root/drivers/tty/tty_audit.c
AgeCommit message (Collapse)AuthorFilesLines
2016-03-07tty: audit: remove unused variableSudip Mukherjee1-7/+1
While building with W=1 we were getting build warning: drivers/tty/tty_audit.c:149:16: warning: variable 'sessionid' set but not used The local variable sessionid was only assigned the value of current->sessionid but was never reused. On further inspection it turned out that there is no need of audit_get_loginuid() also. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Poison tty_audit_buf while process exitsPeter Hurley1-8/+17
Warn if tty_audit_buf use is attempted after tty_audit_exit() has already freed it. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Always push audit buffer before TIOCSTIPeter Hurley1-9/+3
The data read from another tty may be relevant to the action of the TIOCSTI ioctl; log the audit buffer immediately. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Check audit enable firstPeter Hurley1-3/+4
Audit is unlikely to be enabled; check first to exit asap. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Simplify first-use allocationPeter Hurley1-15/+7
The first-use tty audit buffer allocation is a potential race amongst multiple attempts at 'first-use'; only one 'winner' is acceptable. The successful buffer assignment occurs if tty_audit_buf == NULL (which will also be the return from cmpxchg()); otherwise, another racer 'won' and this buffer allocation is freed. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Remove tty_audit_buf reference countingPeter Hurley1-40/+7
When tty_audit_exit() is called from do_exit(), the process is single-threaded. Since the tty_audit_buf is only shared by threads of a process, no other thread can be concurrently accessing the tty_audit_buf during or after tty_audit_exit(). Thus, no other thread can be holding an extra tty_audit_buf reference which would prevent tty_audit_exit() from freeing the tty_audit_buf. As that is the only purpose of the ref counting, remove the reference counting and free the tty_audit_buf directly. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Remove false memory optimizationPeter Hurley1-5/+1
The tty audit buffer is allocated at first use and not freed until the process exits. If tty audit is turned off after the audit buffer has been allocated, no effort is made to release the buffer. So re-checking if tty audit has just been turned off when tty audit was just on is false optimization; the likelihood of triggering this condition is exceedingly small. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Handle tty audit enable atomicallyPeter Hurley1-31/+22
The audit_tty and audit_tty_log_passwd fields are actually bool values, so merge into single memory location to access atomically. NB: audit log operations may still occur after tty audit is disabled which is consistent with the existing functionality Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Track tty association with dev_tPeter Hurley1-18/+14
Use dev_t instead of separate major/minor fields to track tty audit buffer association. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Combine push functionsPeter Hurley1-32/+3
tty_audit_push() and tty_audit_push_current() perform identical tasks; eliminate the tty_audit_push() implementation and the tty_audit_push_current() name. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Ignore current association for audit pushPeter Hurley1-8/+3
In canonical read mode, each line read and logged is pushed separately with tty_audit_push(). For all single-threaded processes and multi-threaded processes reading from only one tty, this patch has no effect; the last line read will still be the entry pushed to the audit log because the tty association cannot have changed between tty_audit_add_data() and tty_audit_push(). For multi-threaded processes reading from different ttys concurrently, the audit log will have mixed log entries anyway. Consider two ttys audited concurrently: CPU0 CPU1 ---------- ------------ tty_audit_add_data(ttyA) tty_audit_add_data(ttyB) tty_audit_push() tty_audit_add_data(ttyB) tty_audit_push() This patch will now cause the ttyB output to be split into separate audit log entries. However, this possibility is equally likely without this patch: CPU0 CPU1 ---------- ------------ tty_audit_add_data(ttyB) tty_audit_add_data(ttyA) tty_audit_push() tty_audit_add_data(ttyB) tty_audit_push() Mixed canonical and non-canonical reads have similar races. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Take siglock directlyPeter Hurley1-8/+5
lock_task_sighand() is for situations where the struct task_struct* may disappear while trying to deref the sighand; this never applies to 'current'. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Defer audit buffer associationPeter Hurley1-8/+8
The tty audit buffer used to audit/record tty input is allocated on the process's first call to tty_audit_add_data(), and not freed until the process exits. On each call to tty_audit_add_data(), the current tty is compared (by major:minor) with the last tty associated with the audit buffer, and if the tty has changed the existing data is logged to the audit log. The audit buffer is then re-associated with the new tty. Currently, the audit buffer is immediately associated with the tty; however, the association must be re-checked when the buffer is locked prior to copying the tty input. This extra step is always necessary, since a concurrent read of a different tty by another thread of the process may have used the buffer in between allocation and buffer lock. Rather than associate the audit buffer with the tty at allocation, leave the buffer initially un-associated (null dev_t); simply let the re-association check also perform the initial association. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Remove icanon mode from call chainPeter Hurley1-13/+9
The tty termios bits cannot change while n_tty_read() is in the i/o loop; the termios_rwsem ensures mutual exclusion with termios changes in n_tty_set_termios(). Check L_ICANON() directly and eliminate icanon parameter. NB: tty_audit_add_data() => tty_audit_buf_get() => tty_audit_buf_alloc() is a single path; ie., tty_audit_buf_get() and tty_audit_buf_alloc() have no other callers. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Early-out pty master reads earlierPeter Hurley1-4/+4
Reads from pty masters are not logged; early-out before taking locks. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-20tty: audit: Fix audit sourcePeter Hurley1-1/+1
The data to audit/record is in the 'from' buffer (ie., the input read buffer). Fixes: 72586c6061ab ("n_tty: Fix auditing support for cannonical mode") Cc: stable <stable@vger.kernel.org> # 4.1+ Cc: Miloslav Trmač <mitr@redhat.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-20audit: anchor all pid references in the initial pid namespaceRichard Guy Briggs1-1/+2
Store and log all PIDs with reference to the initial PID namespace and use the access functions task_pid_nr() and task_tgid_nr() for task->pid and task->tgid. Cc: "Eric W. Biederman" <ebiederm@xmission.com> (informed by ebiederman's c776b5d2) Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
2014-01-13audit: convert all sessionid declaration to unsigned intEric Paris1-1/+1
Right now the sessionid value in the kernel is a combination of u32, int, and unsigned int. Just use unsigned int throughout. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30audit: do not needlessly take a lock in tty_audit_exitEric Paris1-3/+0
We were doing spin_lock_irq and spin_unlock_irq. This is STOOPID. If we were in interupt context we were already screwed and called panic() in do_exit(). So the irq stuff is useless. Also, these values can only be changed by receiving a netlink message from current. Since we are in do_exit() clearly we aren't in the syscall sending the netlink message to change these values. Thus, just read them and go with it. Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30audit: do not needlessly take a spinlock in copy_signalEric Paris1-4/+0
current->signal->audit_* can only change from a netlink message from current. Obviously in this case we cannot be handling a netlink message from current. So there is no change these can change under us. No need to take a lock to read them. Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30audit: add an option to control logging of passwords with pam_tty_auditRichard Guy Briggs1-0/+9
Most commands are entered one line at a time and processed as complete lines in non-canonical mode. Commands that interactively require a password, enter canonical mode to do this while shutting off echo. This pair of features (icanon and !echo) can be used to avoid logging passwords by audit while still logging the rest of the command. Adding a member (log_passwd) to the struct audit_tty_status passed in by pam_tty_audit allows control of canonical mode without echo per task. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30audit: use spin_lock_irqsave/restore in audit tty codeEric Paris1-13/+19
Some of the callers of the audit tty function use spin_lock_irqsave/restore. We were using the forced always enable version, which seems really bad. Since I don't know every one of these code paths well enough, it makes sense to just switch everything to the safe version. Maybe it's a little overzealous, but it's a lot better than an unlucky deadlock when we return to a caller with irq enabled and they expect it to be disabled. Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30audit: push loginuid and sessionid processing downEric Paris1-48/+24
Since we are always current, we can push a lot of this stuff to the bottom and get rid of useless interfaces and arguments. Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30audit: stop pushing loginid, uid, sessionid as argumentsEric Paris1-1/+3
We always use current. Stop pulling this when the skb comes in and pushing it around as arguments. Just get it at the end when you need it. Signed-off-by: Eric Paris <eparis@redhat.com>
2012-10-22TTY: audit, stop accessing tty->icountJiri Slaby1-7/+8
This is a private member of n_tty. Stop accessing it. Instead, take is as an argument. This is needed to allow clean switch of the private members to a separate private structure of n_tty. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18userns: Convert audit to work with user namespaces enabledEric W. Biederman1-2/+3
- Explicitly format uids gids in audit messges in the initial user namespace. This is safe because auditd is restrected to be in the initial user namespace. - Convert audit_sig_uid into a kuid_t. - Enable building the audit code and user namespaces at the same time. The net result is that the audit subsystem now uses kuid_t and kgid_t whenever possible making it almost impossible to confuse a raw uid_t with a kuid_t preventing bugs. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-17userns: Convert the audit loginuid to be a kuidEric W. Biederman1-6/+8
Always store audit loginuids in type kuid_t. Print loginuids by converting them into uids in the appropriate user namespace, and then printing the resulting uid. Modify audit_get_loginuid to return a kuid_t. Modify audit_set_loginuid to take a kuid_t. Modify /proc/<pid>/loginuid on read to convert the loginuid into the user namespace of the opener of the file. Modify /proc/<pid>/loginud on write to convert the loginuid rom the user namespace of the opener of the file. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: Paul Moore <paul@paul-moore.com> ? Cc: David Miller <davem@davemloft.net> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-03-07tty_audit: fix tty_audit_add_data live lock on audit disabledXiaotian Feng1-1/+3
The current tty_audit_add_data code: do { size_t run; run = N_TTY_BUF_SIZE - buf->valid; if (run > size) run = size; memcpy(buf->data + buf->valid, data, run); buf->valid += run; data += run; size -= run; if (buf->valid == N_TTY_BUF_SIZE) tty_audit_buf_push_current(buf); } while (size != 0); If the current buffer is full, kernel will then call tty_audit_buf_push_current to empty the buffer. But if we disabled audit at the same time, tty_audit_buf_push() returns immediately if audit_enabled is zero. Without emptying the buffer. With obvious effect on tty_audit_add_data() that ends up spinning in that loop, copying 0 bytes at each iteration and attempting to push each time without any effect. Holding the lock all along. Suggested-by: Alexander Viro <aviro@redhat.com> Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-05TTY: create drivers/tty and move the tty core files thereGreg Kroah-Hartman1-0/+358
The tty code should be in its own subdirectory and not in the char driver with all of the cruft that is currently there. Based on work done by Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>