summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
AgeCommit message (Collapse)AuthorFilesLines
2017-05-08Merge tag 'tty-4.12-rc1' of ↵Linus Torvalds25-154/+585
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the "big" TTY/Serial patch updates for 4.12-rc1 Not a lot of new things here, the normal number of serial driver updates and additions, tiny bugs fixed, and some core files split up to make future changes a bit easier for Nicolas's "tiny-tty" work. All of these have been in linux-next for a while" * tag 'tty-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (62 commits) serial: small Makefile reordering tty: split job control support into a file of its own tty: move baudrate handling code to a file of its own console: move console_init() out of tty_io.c serial: 8250_early: Add earlycon support for Palmchip UART tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44 vt: make mouse selection of non-ASCII consistent vt: set mouse selection word-chars to gpm's default imx-serial: Reduce RX DMA startup latency when opening for reading serial: omap: suspend device on probe errors serial: omap: fix runtime-pm handling on unbind tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init serial: samsung: Remove useless spinlock serial: samsung: Add missing checks for dma_map_single failure serial: samsung: Use right device for DMA-mapping calls serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off tty: fix comment typo s/repsonsible/responsible/ tty: amba-pl011: Fix spurious TX interrupts serial: xuartps: Enable clocks in the pm disable case also serial: core: Re-use struct uart_port {name} field ...
2017-05-08format-security: move static strings to constKees Cook1-1/+1
While examining output from trial builds with -Wformat-security enabled, many strings were found that should be defined as "const", or as a char array instead of char pointer. This makes some static analysis easier, by producing fewer false positives. As these are all trivial changes, it seemed best to put them all in a single patch rather than chopping them up per maintainer. Link: http://lkml.kernel.org/r/20170405214711.GA5711@beast Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Jes Sorensen <jes@trained-monkey.org> [runner.c] Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Jiri Slaby <jslaby@suse.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Jarod Wilson <jarod@redhat.com> Cc: Florian Westphal <fw@strlen.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Kejian Yan <yankejian@huawei.com> Cc: Daode Huang <huangdaode@hisilicon.com> Cc: Qianqian Xie <xieqianqian@huawei.com> Cc: Philippe Reynes <tremyfr@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Christian Gromm <christian.gromm@microchip.com> Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de> Cc: Jason Litzinger <jlitzingerdev@gmail.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-18serial: small Makefile reorderingNicolas Pitre1-1/+2
Move 21285 entry down alongside other UART drivers to be more consistent with the rest of the file. It is kept before 8250 though, to preserve the existing link ordering between those two. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-18serial: 8250_early: Add earlycon support for Palmchip UARTMarc Gonzalez2-2/+26
Define an OF early console for Palmchip UART, which can be enabled by passing "earlycon" on the boot command line. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-18tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44Timur Tabi1-8/+23
Define a new early console name for Qualcomm Datacenter Technologies QDF2400 SOCs affected by erratum 44, instead of piggy-backing on "pl011". Previously, to enable traditional (non-SPCR) earlycon, the documentation said to specify "earlycon=pl011,<address>,qdf2400_e44", but the code was broken and this didn't actually work. So instead, the method for specifying the E44 work-around with traditional earlycon is "earlycon=qdf2400_e44,<address>". Both methods of earlycon are now enabled with the same function. Fixes: e53e597fd4c4 ("tty: pl011: fix earlycon work-around for QDF2400 erratum 44") Signed-off-by: Timur Tabi <timur@codeaurora.org> Cc: stable <stable@vger.kernel.org> # 4.11 Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-12tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT initSebastian Reichel1-0/+3
The UPF_BOOT_AUTOCONF flag is needed for proper flow control support. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-11imx-serial: Reduce RX DMA startup latency when opening for readingPeter Senna Tschudin1-14/+49
Reduce RX DMA start latency for the first reception when port is opened for reading. Instead of waiting for an interrupt signaling data on RX FIFO or data too old on RX FIFO, start RX DMA immediately when the serial port is opened for reading. Before this patch, the average RX DMA latency for the first reception was 42489 microseconds with a standard deviation of 25721 microseconds in 36 samples. After the patch the average RX DMA latency for the first reception, when the serial port is opened for reading, is 653 microseconds with a standard deviation of 294 microseconds in 36 samples. Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-11serial: omap: suspend device on probe errorsJohan Hovold1-1/+2
Make sure to actually suspend the device before returning after a failed (or deferred) probe. Note that autosuspend must be disabled before runtime pm is disabled in order to balance the usage count due to a negative autosuspend delay as well as to make the final put suspend the device synchronously. Fixes: 388bc2622680 ("omap-serial: Fix the error handling in the omap_serial probe") Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-11serial: omap: fix runtime-pm handling on unbindJohan Hovold1-1/+5
An unbalanced and misplaced synchronous put was used to suspend the device on driver unbind, something which with a likewise misplaced pm_runtime_disable leads to external aborts when an open port is being removed. Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010 ... [<c046e760>] (serial_omap_set_mctrl) from [<c046a064>] (uart_update_mctrl+0x50/0x60) [<c046a064>] (uart_update_mctrl) from [<c046a400>] (uart_shutdown+0xbc/0x138) [<c046a400>] (uart_shutdown) from [<c046bd2c>] (uart_hangup+0x94/0x190) [<c046bd2c>] (uart_hangup) from [<c045b760>] (__tty_hangup+0x404/0x41c) [<c045b760>] (__tty_hangup) from [<c045b794>] (tty_vhangup+0x1c/0x20) [<c045b794>] (tty_vhangup) from [<c046ccc8>] (uart_remove_one_port+0xec/0x260) [<c046ccc8>] (uart_remove_one_port) from [<c046ef4c>] (serial_omap_remove+0x40/0x60) [<c046ef4c>] (serial_omap_remove) from [<c04845e8>] (platform_drv_remove+0x34/0x4c) Fix this up by resuming the device before deregistering the port and by suspending and disabling runtime pm only after the port has been removed. Also make sure to disable autosuspend before disabling runtime pm so that the usage count is balanced and device actually suspended before returning. Note that due to a negative autosuspend delay being set in probe, the unbalanced put would actually suspend the device on first driver unbind, while rebinding and again unbinding would result in a negative power.usage_count. Fixes: 7e9c8e7dbf3b ("serial: omap: make sure to suspend device before remove") Cc: Felipe Balbi <balbi@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT initSebastian Reichel1-0/+3
The UPF_BOOT_AUTOCONF flag is needed for proper flow control support. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08serial: samsung: Remove useless spinlockMarek Szyprowski1-4/+0
Spinlock taken only for dma_map_single() for TX buffer is completely useless and doesn't protect anything, so remove it to simplify the code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08serial: samsung: Add missing checks for dma_map_single failureMarek Szyprowski1-7/+24
This patch adds missing checks for dma_map_single() failure and proper error reporting. Although this issue was harmless on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes the following DMA API debug warning: WARNING: CPU: 1 PID: 3785 at lib/dma-debug.c:1171 check_unmap+0x8a0/0xf28 dma-pl330 121a0000.pdma: DMA-API: device driver failed to check map error[device address=0x000000006e0f9000] [size=4096 bytes] [mapped as single] Modules linked in: CPU: 1 PID: 3785 Comm: (agetty) Tainted: G W 4.11.0-rc1-00137-g07ca963-dirty #59 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24) [<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0) [<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180) [<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50) [<c01395a4>] (warn_slowpath_fmt) from [<c072a114>] (check_unmap+0x8a0/0xf28) [<c072a114>] (check_unmap) from [<c072a834>] (debug_dma_unmap_page+0x98/0xc8) [<c072a834>] (debug_dma_unmap_page) from [<c0803874>] (s3c24xx_serial_shutdown+0x314/0x52c) [<c0803874>] (s3c24xx_serial_shutdown) from [<c07f5124>] (uart_port_shutdown+0x54/0x88) [<c07f5124>] (uart_port_shutdown) from [<c07f522c>] (uart_shutdown+0xd4/0x110) [<c07f522c>] (uart_shutdown) from [<c07f6a8c>] (uart_hangup+0x9c/0x208) [<c07f6a8c>] (uart_hangup) from [<c07c426c>] (__tty_hangup+0x49c/0x634) [<c07c426c>] (__tty_hangup) from [<c07c78ac>] (tty_ioctl+0xc88/0x16e4) [<c07c78ac>] (tty_ioctl) from [<c03b5f2c>] (do_vfs_ioctl+0xc4/0xd10) [<c03b5f2c>] (do_vfs_ioctl) from [<c03b6bf4>] (SyS_ioctl+0x7c/0x8c) [<c03b6bf4>] (SyS_ioctl) from [<c010b4a0>] (ret_fast_syscall+0x0/0x3c) Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com> Fixes: 62c37eedb74c8 ("serial: samsung: add dma reqest/release functions") CC: stable@vger.kernel.org # v4.10+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08serial: samsung: Use right device for DMA-mapping callsMarek Szyprowski1-5/+4
Driver should provide its own struct device for all DMA-mapping calls instead of extracting device pointer from DMA engine channel. Although this is harmless from the driver operation perspective on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes following DMA API debug warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1241 check_sync+0x520/0x9f4 samsung-uart 12c20000.serial: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000006df0f580] [size=64 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00137-g07ca963 #51 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24) [<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0) [<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180) [<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50) [<c01395a4>] (warn_slowpath_fmt) from [<c0729058>] (check_sync+0x520/0x9f4) [<c0729058>] (check_sync) from [<c072967c>] (debug_dma_sync_single_for_device+0x88/0xc8) [<c072967c>] (debug_dma_sync_single_for_device) from [<c0803c10>] (s3c24xx_serial_start_tx_dma+0x100/0x2f8) [<c0803c10>] (s3c24xx_serial_start_tx_dma) from [<c0804338>] (s3c24xx_serial_tx_chars+0x198/0x33c) Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com> Fixes: 62c37eedb74c8 ("serial: samsung: add dma reqest/release functions") CC: stable@vger.kernel.org # v4.0+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be offUwe Kleine-König1-13/+23
If the UART is operated in DTE mode and UCR3_DCD or UCR3_RI are 1 (which is the reset default) and the opposite side pulls the respective line to its active level the irq triggers after it is requested in .probe. These irqs were already disabled in .startup but this might be too late. Also setup of the UFCR_DCEDTE bit (currently done in .set_termios) is done very late which is critical as it also controls direction of some pins. So setup UFCR_DCEDTE earlier (in .probe) and also disable the broken irqs in DTE mode there before requesting irqs. Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08tty: amba-pl011: Fix spurious TX interruptsJayachandran C1-9/+14
On SMP systems, we see a lot of spurious TX interrupts when a program generates a steady stream of output to the pl011 UART. The problem can be easily seen when one CPU generates the output while another CPU handles the pl011 interrupts, and the rate of output is low enough not to fill the TX FIFO. The problem seems to be: -- CPU a -- -- CPU b -- (take port lock) pl011_start_tx pl011_start_tx_pio enable TXIM in REG_IMSC -> causes uart tx intr (pl011_int) pl011_tx_chars pl011_int ...tx chars, all done... (wait for port lock) pl011_stop_tx . disable TXIM . (release port lock) -> (take port lock) check for TXIM, not enabled (release port lock) return IRQ_NONE Enabling the TXIM in pl011_start_tx_pio() causes the interrupt to be generated and delivered to CPU b, even though pl011_tx_chars() is able to complete the TX and then disable the tx interrupt. Fix this by enabling TXIM only after pl011_tx_chars, if it is needed. pl011_tx_chars will return a boolean indicating whether the TX interrupts have to be enabled. Debugged-by: Vijaya Kumar <Vijaya.Kumar@cavium.com> Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08serial: xuartps: Enable clocks in the pm disable case alsoShubhrajyoti Datta1-7/+7
When Power management is disabled then the clocks are not getting enabled. This patch enables it for the !PM case also. While at it also pm_runtime_set_active is called before calling pm_runtime_enable. Reported-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08serial: core: Re-use struct uart_port {name} fieldAndy Shevchenko1-6/+4
Since we have port name stored in struct uart_port, we better to use that one instead of open coding. This will make it one place source for easier maintenance or modifications. While here, replace printk(KERN_INFO ) by pr_info(). It seems last printk() call in serial_core.c. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08serial: sprd: adjust TIMEOUT to a big valueWei Qiao1-1/+1
SPRD_TIMEOUT was 256, which is too small to wait until the status switched to workable in a while loop, so that the earlycon could not work correctly. Signed-off-by: Wei Qiao <wei.qiao@spreadtrum.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-03Merge 4.11-rc5 into tty-nextGreg Kroah-Hartman4-5/+36
We want the serial fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-01tty: pl011: fix earlycon work-around for QDF2400 erratum 44Timur Tabi1-2/+21
The work-around for the Qualcomm Datacenter Technologies QDF2400 erratum 44 sets the "qdf2400_e44_present" global variable if the work-around is needed. However, this check does not happen until after earlycon is initialized, which means the work-around is not used, and the console hangs as soon as it displays one character. Fixes: d8a4995bcea1 ("tty: pl011: Work around QDF2400 E44 stuck BUSY bit") Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31serial: 8250_EXAR: fix duplicate Kconfig text and add missing help textPaul Gortmaker1-2/+6
In commit d0aeaa83f0b0f7a92615bbdd6b1f96812f7dcfd2 ("serial: exar: split out the exar code from 8250_pci") the exar driver got its own Kconfig. However the text for the new option was never changed from the original 8250_PCI text, and hence it appears confusing when you get asked the same question twice: 8250/16550 PCI device support (SERIAL_8250_PCI) [Y/n/m/?] (NEW) 8250/16550 PCI device support (SERIAL_8250_EXAR) [Y/n/m] (NEW) Adding to the confusion, is that there is no help text for this new option to indicate it is specific to a certain family of cards. Fix both issues at the same time, as well as the space vs. tab issues introduced in the same commit. Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci") Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31tty/serial: atmel: fix TX path in atmel_console_write()Nicolas Ferre1-0/+3
A side effect of 89d8232411a8 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx") is that the console can be called with TX path disabled. Then the system would hang trying to push charecters out in atmel_console_putchar(). Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Fixes: 89d8232411a8 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx") Cc: stable <stable@vger.kernel.org> #4.4+ Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31tty/serial: atmel: fix race condition (TX+DMA)Richard Genoud1-0/+5
If uart_flush_buffer() is called between atmel_tx_dma() and atmel_complete_tx_dma(), the circular buffer has been cleared, but not atmel_port->tx_len. That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE - atmel_port->tx_len) bytes). Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> # 3.12+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31serial: mxs-auart: Fix baudrate calculationUwe Kleine-König1-1/+1
The reference manual for the i.MX28 recommends to calculate the divisor as divisor = (UARTCLK * 32) / baud rate, rounded to the nearest integer , so let's do this. For a typical setup of UARTCLK = 24 MHz and baud rate = 115200 this changes the divisor from 6666 to 6667 and so the actual baud rate improves from 115211.521 Bd (error ≅ 0.01 %) to 115194.240 Bd (error ≅ 0.005 %). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31tty: serial: fsl_lpuart: lock port on console writeStefan Agner1-0/+20
The console write code is not entirely race free (e.g. the operations to disabling the UART interrupts are not atomic) hence locking is required. This has been become apparent with the PREEMPT RT patchset applied: With the fully preemptible kernel configuration the system often ended up in a freeze already at startup. Disable interrupts and lock using read_lock_irqsave. Try to lock in the sysrq/oops case, but don't bother if locking fails. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31serial: altera_uart: add earlycon supportTobias Klauser2-0/+33
Nios2 currently uses its own early printk implementation, rather than using unified earlycon support to show boot messages on altera_uart. Add earlycon support to altera_uart so that other archs may use it. Also, this (together with the corresponding patch for altera_jtaguart) will allow the early printk implementation in arch/nios2 to be removed in a future patch. Cc: Ley Foon Tan <lftan@altera.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31serial: 8250: 8250_core: Fix irq name for 8250 serial IRQVignesh R1-1/+1
Using dev_name() as IRQ name during request_irq() might be misleading in case of serial over PCI. Therefore identify serial port IRQ using uart_port's name field. This will help mapping IRQs to appropriate ttySN(where N is the serial port index) instances. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31tty: serial_core: Add name field to uart_port structVignesh R1-0/+7
Introduce a field to store name of uart_port that can be used to easily identify UART port instances on a system that has more than one UART instance. The name is of the form ttyXN(eg. ttyS0, ttyAMA0,..) where N is number that particular UART instance. This field will be useful when printing debug info for a particular port or in register IRQs with unique IRQ name. Port name is populated during uart_add_one_port(). Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31serial: 8250_lpss: Unconditionally set PCI master for QuarkJan Kiszka1-1/+2
MSI needs it as well. Should have no practical impact, though, as DMA is always available on the Quark. But given the few users of pci_alloc_irq_vectors so far, this incorrect pattern may spread otherwise. Fixes: 3f3a46951e02 ("serial: 8250_lpss: set PCI master only for private DMA") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31serial: sh-sci: Fix (AUTO)RTS in sci_init_pins()Geert Uytterhoeven1-6/+19
If a UART has dedicated RTS/CTS pins, and hardware control flow is disabled (or AUTORTS is not yet effective), changing any serial port configuration deasserts RTS, as .set_termios() calls sci_init_pins(). To fix this, consider the current (AUTO)RTS state when (re)initializing the pins. Note that for SCIFA/SCIFB, AUTORTS needs explicit configuration of the RTS# pin function, while (H)SCIF handles this automatically. Fixes: d2b9775d795ec05f ("serial: sh-sci: Correct pin initialization on (H)SCIF") Fixes: e9d7a45a03991349 ("serial: sh-sci: Add pin initialization for SCIFA/SCIFB") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31serial: sh-sci: Fix late enablement of AUTORTSGeert Uytterhoeven1-0/+4
When changing hardware control flow for a UART with dedicated RTS/CTS pins, the new AUTORTS state is not immediately reflected in the hardware, but only when RTS is raised. However, the serial core does not call .set_mctrl() after .set_termios(), hence AUTORTS may only become effective when the port is closed, and reopened later. Note that this problem does not happen when manually using stty to change CRTSCTS, as AUTORTS will work fine on next open. To fix this, call .set_mctrl() from .set_termios() when dedicated RTS/CTS pins are present, to refresh the AUTORTS or RTS state. This is similar to what other drivers supporting AUTORTS do (e.g. omap-serial). Reported-by: Baumann, Christoph (C.) <cbaumann@visteon.com> Fixes: 33f50ffc253854cf ("serial: sh-sci: Fix support for hardware-assisted RTS/CTS") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31serial: sh-sci: Fix hang in sci_reset()Geert Uytterhoeven1-4/+0
When the .set_termios() callback resets the UART, it first waits (busy loops) until all characters in the transmit FIFO have been transmitted, to prevent a port configuration change from impacting these characters. However, if the UART has dedicated RTS/CTS hardware flow control enabled, these characters may have been stuck in the FIFO due to CTS not being asserted by the remote side. - When a new user opens the port, .set_termios() is called while transmission is still disabled, leading to an infinite loop: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! - When an active user changes port configuration without waiting for the draining of the transmit FIFO, this may also block indefinitely, until CTS is asserted by the remote side. This has been observed with SCIFA (on r8a7740/armadillo), and SCIFB and HSCIF (on r8a7791/koelsch). To fix this, remove the code that waits for the draining of the transmit FIFO. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31serial: st-asc: Change default baudrate from 9600 to 115200Lee Jones1-1/+1
9600 is old school. Most applications use 115200 as the default baud these days. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31tty: serial: st-asc: Make the locking RT awareLionel Debieve1-5/+3
The lock is a sleeping lock and local_irq_save() is not the standard implementation now. Working for both -RT and non RT. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-29Merge 4.11-rc4 into tty-nextGreg Kroah-Hartman2-7/+13
We want the tty/serial fixes in here to handle bugfixes and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-26Merge tag 'tty-4.11-rc4' of ↵Linus Torvalds2-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some tty and serial driver fixes for 4.11-rc4. One of these fix a long-standing issue in the ldisc code that was found by Dmitry Vyukov with his great fuzzing work. The other fixes resolve other reported issues, and there is one revert of a patch in 4.11-rc1 that wasn't correct. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: fix data race in tty_ldisc_ref_wait() tty: don't panic on OOM in tty_set_ldisc() Revert "tty: serial: pl011: add ttyAMA for matching pl011 console" tty: acpi/spcr: QDF2400 E44 checks for wrong OEM revision serial: 8250_dw: Fix breakage when HAVE_CLK=n serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termios
2017-03-21Merge tag 'gpio-v4.11-2' of ↵Linus Torvalds1-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here is the first set of GPIO fixes for 4.11. It was delayed a bit beacuse I was chicken when linux-next was not rotating last week. This hits the ST serial driver in drivers/tty/serial and that has an ACK from Greg, he suggested to keep the old GPIO fwnode API around to smoothen things in the merge Windod and those have now served their purpose so we take them out and convert the last driver to the new API. Apart from that it's fixes as usual. Summary: - set the parent on the Altera A10SR driver, also fix high level IRQs. - fix error path on the mockup driver. - compilation noise about unused functions fixed. - fix missed interrupts on the MCP23S08 expander, this is also tagged for stable. - retire the interrim helpers devm_get_gpiod_from_child() used to smoothen merging in the merge window" * tag 'gpio-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio:mcp23s08 Fixed missing interrupts serial: st-asc: Use new GPIOD API to obtain RTS pin gpio: altera: Use handle_level_irq when configured as a level_high gpio: xgene: mark PM functions as __maybe_unused gpio: mockup: return -EFAULT if copy_from_user() fails gpio: altera-a10sr: Set gpio_chip parent property
2017-03-17serial: 8250_dw: simplify optional reset handlingPhilipp Zabel1-8/+5
As of commit bb475230b8e5 ("reset: make optional functions really optional"), the reset framework API calls use NULL pointers to describe optional, non-present reset controls. This allows to return errors from devm_reset_control_get_optional and to call reset_control_(de)assert unconditionally. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17tty: serial_core, remove state checks in uart_poll*Jiri Slaby1-12/+5
Coverity complains about uart_state checks in polling functions. And it is indeed correct. We do something like this: struct uart_state *state = drv->state + line; if (!state) return; Adding 'line' to drv->state would move the potential NULL pointer to something near NULL and the check is useless. Even if we checked pure drv->state, nothing guarantees it is not freed and NULLed after the check. So if the only user of this interface (kgdboc) needs to assure something, this is neither the correct thing, nor place to do so. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Cc: Jason Wessel <jason.wessel@windriver.com> Cc: kgdb-bugreport@lists.sourceforge.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17serial: 8250_fintek: Enable high speed mode on Fintek F81866Lukas Redlinger1-5/+38
Fintek F81866 supports baud rates higher than 115200 but needs to raise it's clock speed from 1.84 to 14.76 MHz. This is eight times faster, so gives 921600 as resulting baud_base. F81866 clock register 0xf2: Bit 7-2 reserved Bit 1-0 00: 1.8432MHz 01: 18.432MHz 10: 24MHz 11: 14.769MHz Signed-off-by: Lukas Redlinger <rel+kernel@agilox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17uartlite: Adding a kernel parameter for the number of uartlitesSam Povilus2-1/+10
The number of uartlites should be set by a kernel parameter instead of using a #define. This allows the user to set the number of uartlites using only kconfig and not modifying kernel source. The uartlite is used by FPGAs that support a basically unlimited number of uarts so limiting it at 16 dosn't make sense as users might need more than that. Signed-off-by: Sam Povilus <kernel.development@povil.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17serial: xuartps: Cleanup the clock enableShubhrajyoti Datta1-6/+3
The core handles the clocking now. Remove the clock disable in suspend. In resume we enable the clocks and disable after register write. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17serial: altera_jtaguart: add earlycon supportTobias Klauser2-0/+21
Nios2 currently uses its own early printk implementation, rather than using unified earlycon support to show boot messages on altera_jtaguart (and altera_uart for that matter). Add earlycon support to altera_jtaguart so that other archs may use it. Also, this will allow the early printk implementation in arch/nios2 to eventually be removed in a future patch. Cc: Ley Foon Tan <lftan@altera.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17Revert "tty: serial: pl011: add ttyAMA for matching pl011 console"Aleksey Makarov1-1/+1
The original patch makes the condition always true, so it is wrong. It masks (but not fixes) the bug described in the commit message but introduces a regression (no console is selected by SPCR) in regular (no 'console=ttyAMA') case. s/||/&&/ would not fix the problem as the root cause was identified incorrectly. This reverts commit aea9a80ba98a0c9b4de88850260e9fbdcc98360b. Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14serial: st-asc: Use new GPIOD API to obtain RTS pinLee Jones1-5/+6
The commits mentioned below adapt the GPIO API to allow more information to be passed directly through devm_get_gpiod_from_child() in the first instance. This facilitates the removal of subsequent calls, such as gpiod_direction_output(). This patch firstly moves to utilise the new API and secondly removes the now superfluous call do set the direction. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Also drop the header file dummies that only this driver was using] Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-14serial: xilinx_uartps: Add pm runtime supportShubhrajyoti Datta1-8/+42
Adds pm runtime support to xilinx uart ps. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14serial: 8250: 8250_core: Use dev_name() during request_irq()Vignesh R1-1/+1
Passing "serial" as name during request_irq() results in all serial port irqs have same name. This does not help much to easily identify which irq belongs to which serial port instance. Therefore pass dev_name() during request_irq() so that better identifiable name is listed for serial ports in cat /proc/interrupts output. Output of cat /proc/interrupts Before this patch: 26: 689 0 GICv2 309 Edge serial After this patch: 26: 696 0 GICv2 309 Edge 2530c00.serial Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14drivers: convert sbd_duart.map_guard from atomic_t to refcount_tElena Reshetova1-11/+7
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14tty/serial: atmel: move atmel_serial header into driver directoryRichard Genoud2-1/+170
atmel_serial.h is only used by atmel_serial.c, so there's no need for it to lie in include/linux. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14serial: 8250_exar: Fix spelling of "driver"Andy Shevchenko1-1/+1
Fix typo in "Dricer". Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-26 02:53:14 +0000