summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
AgeCommit message (Collapse)AuthorFilesLines
2022-06-30serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURSTBiju Das1-1/+1
As per RZ/N1 peripheral user manual(r01uh0752ej0100-rzn1-peripheral.pdf) rev 1.0.0 Mar,2019, the value for 8_WORD_BURST is 4(b2,b1=2’b10). This patch fixes the macro as per the user manual. Fixes: aa63d786cea2 ("serial: 8250: dw: Add support for DMA flow controlling devices") Reviewed-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220630083909.4294-1-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: mvebu-uart: correctly report configured baudrate valuePali Rohár1-12/+13
Functions tty_termios_encode_baud_rate() and uart_update_timeout() should be called with the baudrate value which was set to hardware. Linux then report exact values via ioctl(TCGETS2) to userspace. Change mvebu_uart_baud_rate_set() function to return baudrate value which was set to hardware and propagate this value to above mentioned functions. With this change userspace would see precise value in termios c_ospeed field. Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate") Cc: stable <stable@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20220628100922.10717-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250: Fix PM usage_count for console handoverIlpo Järvinen2-5/+4
When console is enabled, univ8250_console_setup() calls serial8250_console_setup() before .dev is set to uart_port. Therefore, it will not call pm_runtime_get_sync(). Later, when the actual driver is going to take over univ8250_console_exit() is called. As .dev is already set, serial8250_console_exit() makes pm_runtime_put_sync() call with usage count being zero triggering PM usage count warning (extra debug for univ8250_console_setup(), univ8250_console_exit(), and serial8250_register_ports()): [ 0.068987] univ8250_console_setup ttyS0 nodev [ 0.499670] printk: console [ttyS0] enabled [ 0.717955] printk: console [ttyS0] printing thread started [ 1.960163] serial8250_register_ports assigned dev for ttyS0 [ 1.976830] printk: console [ttyS0] disabled [ 1.976888] printk: console [ttyS0] printing thread stopped [ 1.977073] univ8250_console_exit ttyS0 usage:0 [ 1.977075] serial8250 serial8250: Runtime PM usage count underflow! [ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A [ 1.977812] univ8250_console_setup ttyS0 usage:2 [ 1.978167] printk: console [ttyS0] printing thread started [ 1.978203] printk: console [ttyS0] enabled To fix the issue, call pm_runtime_get_sync() in serial8250_register_ports() as soon as .dev is set for an uart_port if it has console enabled. This problem became apparent only recently because 82586a721595 ("PM: runtime: Avoid device usage count underflows") added the warning printout. I confirmed this problem also occurs with v5.18 (w/o the warning printout, obviously). Fixes: bedb404e91bb ("serial: 8250_port: Don't use power management for kernel console") Cc: stable <stable@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/b4f428e9-491f-daf2-2232-819928dc276e@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: 8250: fix return error code in serial8250_request_std_resource()Yi Yang1-1/+3
If port->mapbase = NULL in serial8250_request_std_resource() , it need return a error code instead of 0. If uart_set_info() fail to request new regions by serial8250_request_std_resource() but the return value of serial8250_request_std_resource() is 0, The system incorrectly considers that the resource application is successful and does not attempt to restore the old setting. A null pointer reference is triggered when the port resource is later invoked. Signed-off-by: Yi Yang <yiyang13@huawei.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220628083515.64138-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: stm32: Clear prev values before setting RTS delaysIlpo Järvinen1-0/+2
The code lacks clearing of previous DEAT/DEDT values. Thus, changing values on the fly results in garbage delays tending towards the maximum value as more and more bits are ORed together. (Leaving RS485 mode would have cleared the old values though). Fixes: 1bcda09d2910 ("serial: stm32: add support for RS485 hardware control mode") Cc: stable <stable@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220627150753.34510-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: Fix __stop_tx() & DMA Tx restart racesIlpo Järvinen2-4/+4
Commit e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") changed __dma_tx_complete() to enable THRI that is cleared in __stop_tx() once THRE is asserted as UART runs out bits to transmit. It is possible, however, that more data arrives in between in which case serial8250_tx_dma() resumes Tx. THRI is not supposed to be on during DMA Tx because DMA is based on completion handler, therefore THRI must be cleared unconditionally in serial8250_tx_dma(). When Tx is about to start, another race window exists with serial8250_handle_irq() leading to a call into __stop_tx() while the Tx has already been resumed: __tx_complete(): -> spin_lock(port->lock) -> dma->tx_running = 0 -> serial8250_set_THRI() -> spin_unlock(port->lock) uart_start(): serial8250_handle_irq(): -> spin_lock(port->lock) -> serial8250_tx_dma(): -> dma->tx_running = 1 -> spin_unlock(port->lock) -> spin_lock(port->lock) -> __stop_tx() Close this race by checking !dma->tx_running before calling into __stop_tx(). Fixes: e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220615090651.15340-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottleIlpo Järvinen1-2/+21
The driver must provide throttle and unthrottle in uart_ops when it sets UPSTAT_AUTORTS. Add them using existing stop_rx & enable_interrupts functions. Fixes: 2a76fa283098 (serial: pl011: Adopt generic flag to store auto RTS status) Cc: stable <stable@kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Reported-by: Nuno Gonçalves <nunojpg@gmail.com> Tested-by: Nuno Gonçalves <nunojpg@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220614075637.8558-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty: serial: samsung_tty: set dma burst_size to 1Chanho Park1-3/+2
The src_maxburst and dst_maxburst have been changed to 1 but the settings of the UCON register aren't changed yet. They should be changed as well according to the dmaengine slave config. Fixes: aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions") Cc: stable <stable@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220627065113.139520-1-chanho61.park@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: dw: enable using pdata with ACPIMarcin Wojtas1-12/+12
Commit ffd381445eac ("serial: 8250: dw: Move the USR register to pdata") caused NULL-pointer dereference when booting with ACPI by unconditional usage of the recently added pdata. In order to fix that and prevent similar issues in future, hook the default version of this structure in dw8250_acpi_match table. While at it, sort all entries alphabetically. Fixes: ffd381445eac ("serial: 8250: dw: Move the USR register to pdata") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20220620121046.1307412-1-mw@semihalf.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250: Store to lsr_save_flags after lsr readIlpo Järvinen1-0/+2
Not all LSR register flags are preserved across reads. Therefore, LSR readers must store the non-preserved bits into lsr_save_flags. This fix was initially mixed into feature commit f6f586102add ("serial: 8250: Handle UART without interrupt on TEMT using em485"). However, that feature change had a flaw and it was reverted to make room for simpler approach providing the same feature. The embedded fix got reverted with the feature change. Re-add the lsr_save_flags fix and properly mark it's a fix. Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250") Cc: stable <stable@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@penugtronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10tty: serial: qcom-geni-serial: Implement start_rx callbackVijaya Krishna Nivarthi1-0/+1
In suspend sequence stop_rx will be performed only if implementation for start_rx callback is present. Set qcom_geni_serial_start_rx as callback for start_rx so that stop_rx is performed. Fixes: c9d2325cdb92 ("serial: core: Do stop_rx in suspend path for console if console_suspend is disabled") Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Link: https://lore.kernel.org/r/1654627965-1461-3-git-send-email-quic_vnivarth@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: core: Introduce callback for start_rx and do stop_rx in suspend only ↵Vijaya Krishna Nivarthi1-3/+6
if this callback implementation is present. In suspend sequence there is a need to perform stop_rx during suspend sequence to prevent any asynchronous data over rx line. However this can cause problem to drivers which dont do re-start_rx during set_termios. Add new callback start_rx and perform stop_rx only when implementation of start_rx is present. Also add call to start_rx in resume sequence so that drivers who come across this problem can make use of this framework. Fixes: c9d2325cdb92 ("serial: core: Do stop_rx in suspend path for console if console_suspend is disabled") Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Link: https://lore.kernel.org/r/1654627965-1461-2-git-send-email-quic_vnivarth@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-03Merge tag 'tty-5.19-rc1' of ↵Linus Torvalds58-1336/+1760
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.19-rc1. Lots of tiny cleanups in here, the major stuff is: - termbit cleanups and unification by Ilpo. A much needed change that goes a long way to making things simpler for all of the different arches - tty documentation cleanups and movements to their own place in the documentation tree - old tty driver cleanups and fixes from Jiri to bring some existing drivers into the modern world - RS485 cleanups and unifications to make it easier for individual drivers to support this mode instead of having to duplicate logic in each driver - Lots of 8250 driver updates and additions - new device id additions - n_gsm continued fixes and cleanups - other minor serial driver updates and cleanups All of these have been in linux-next for weeks with no reported issues" * tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits) tty: Rework receive flow control char logic pcmcia: synclink_cs: Don't allow CS5-6 serial: stm32-usart: Correct CSIZE, bits, and parity serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 serial: sifive: Sanitize CSIZE and c_iflag serial: sh-sci: Don't allow CS5-6 serial: txx9: Don't allow CS5-6 serial: rda-uart: Don't allow CS5-6 serial: digicolor-usart: Don't allow CS5-6 serial: uartlite: Fix BRKINT clearing serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE serial: core: Do stop_rx in suspend path for console if console_suspend is disabled tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate. dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485 Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL" serial: msm_serial: disable interrupts in __msm_console_write() serial: meson: acquire port->lock in startup() serial: 8250_dw: Use dev_err_probe() serial: 8250_dw: Use devm_add_action_or_reset() ...
2022-05-26Merge tag 'asm-generic-5.19' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "The asm-generic tree contains three separate changes for linux-5.19: - The h8300 architecture is retired after it has been effectively unmaintained for a number of years. This is the last architecture we supported that has no MMU implementation, but there are still a few architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with and without an MMU. - A series to add a generic ticket spinlock that can be shared by most architectures with a working cmpxchg or ll/sc type atomic, including the conversion of riscv, csky and openrisc. This series is also a prerequisite for the loongarch64 architecture port that will come as a separate pull request. - A cleanup of some exported uapi header files to ensure they can be included from user space without relying on other kernel headers" * tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: h8300: remove stale bindings and symlink sparc: add asm/stat.h to UAPI compile-test coverage powerpc: add asm/stat.h to UAPI compile-test coverage mips: add asm/stat.h to UAPI compile-test coverage riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h> agpgart.h: do not include <stdlib.h> from exported header csky: Move to generic ticket-spinlock RISC-V: Move to queued RW locks RISC-V: Move to generic spinlocks openrisc: Move to ticket-spinlock asm-generic: qrwlock: Document the spinlock fairness requirements asm-generic: qspinlock: Indicate the use of mixed-size atomics asm-generic: ticket-lock: New generic ticket-based spinlock remove the h8300 architecture
2022-05-26Merge tag 'arm-multiplatform-5.19-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...
2022-05-25Merge tag 'sound-5.19-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Not much dramatic changes at this time, but we've received quite a lot of changes for ASoC, while there are still a few fixes and quirks for usual HD- and USB-auido. Here are some highlights. ASoC: - Overhaul of endianness specification for data formats, avoiding needless restrictions due to CODECs - Initial stages of Intel AVS driver merge - Introduction of v4 IPC mechanism for SOF - TDM mode support for AK4613 - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces, nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780 Others: - A few regression fixes after the USB-audio endpoint management refactoring - More enhancements for Cirrus HD-audio codec support (still ongoing) - Addition of generic serial MIDI driver" * tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits) ALSA: hda/realtek - Add new type for ALC245 ALSA: usb-audio: Configure sync endpoints before data ALSA: ctxfi: fix typo in comment ALSA: cs5535audio: fix typo in comment ALSA: ctxfi: Add SB046x PCI ID ALSA: usb-audio: Add missing ep_idx in fixed EP quirks ALSA: usb-audio: Workaround for clock setup on TEAC devices ALSA: lola: Bounds check loop iterator against streams array size ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv() ASoC: rt1308-sdw: add the default value of register 0xc320 ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic ASoC: rt9120: Fix 3byte read, valule offset typo ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver. ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition() ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR' ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get() ASoC: SOF: mediatek: remove duplicate include in mt8195.c ASoC: SOF: mediatek: Add mt8195 debug dump ASoC: SOF: mediatek: Add mediatek common debug dump ...
2022-05-23Merge tag 'asoc-v5.19' of ↵Takashi Iwai1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.19 This is quite a big update, partly due to the addition of some larger drivers (more of which is to follow since at least the AVS driver is still a work in progress) and partly due to Charles' work sorting out our handling of endianness. As has been the case recently it's much more about drivers than the core. - Overhaul of endianness specification for data formats, avoiding needless restrictions due to CODECs. - Initial stages of Intel AVS driver merge. - Introduction of v4 IPC mechanism for SOF. - TDM mode support for AK4613. - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces, nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
2022-05-19serial: stm32-usart: Correct CSIZE, bits, and parityIlpo Järvinen1-3/+12
Add CSIZE sanitization for unsupported CSIZE configurations. In addition, if parity is asked for but CSx was unsupported, the sensible result is CS8+parity which requires setting USART_CR1_M0 like with 9 bits. Incorrect CSIZE results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: c8a9d043947b (serial: stm32: fix word length configuration) Cc: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: st-asc: Sanitize CSIZE and correct PARENB for CS7Ilpo Järvinen1-0/+4
Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has to have parity, thus add PARENB. Incorrect CSIZE results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: c4b058560762 (serial:st-asc: Add ST ASC driver.) Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: sifive: Sanitize CSIZE and c_iflagIlpo Järvinen1-1/+5
Only CS8 is supported but CSIZE was not sanitized to CS8. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Similarly, INPCK, PARMRK, and BRKINT are reported textually unsupported but were not cleared in termios c_iflag which is the machine-readable format. Fixes: 45c054d0815b (tty: serial: add driver for the SiFive UART) Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: sh-sci: Don't allow CS5-6Ilpo Järvinen1-1/+5
Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or CS6 to CS8. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2) Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: txx9: Don't allow CS5-6Ilpo Järvinen1-0/+2
Only CS7 and CS8 are supported but CSIZE is not sanitized with CS5 or CS6 to CS8. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2) Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: rda-uart: Don't allow CS5-6Ilpo Järvinen1-0/+2
Only CS7 and CS8 are supported but CSIZE is not sanitized after fallthrough from CS5 or CS6 to CS7. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: c10b13325ced (tty: serial: Add RDA8810PL UART driver) Cc: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: digicolor-usart: Don't allow CS5-6Ilpo Järvinen1-0/+2
Only CS7 and CS8 seem supported but CSIZE is not sanitized to CS8 in the default: block. Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: 5930cb3511df (serial: driver for Conexant Digicolor USART) Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: uartlite: Fix BRKINT clearingIlpo Järvinen1-1/+2
BRKINT is within c_iflag rather than c_cflag. Fixes: ea017f5853e9 (tty: serial: uartlite: Prevent changing fixed parameters) Reviewed-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220519081808.3776-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLEYueHaibing1-1/+1
drivers/tty/serial/cpm_uart/cpm_uart_core.c: In function ‘cpm_uart_init_port’: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1251:7: error: ‘udbg_port’ undeclared (first use in this function); did you mean ‘uart_port’? if (!udbg_port) ^~~~~~~~~ uart_port commit d142585bceb3 leave this corner, wrap it with #ifdef block Fixes: d142585bceb3 ("serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20220518135452.39480-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: core: Do stop_rx in suspend path for console if console_suspend is ↵Vijaya Krishna Nivarthi1-2/+9
disabled For the case of console_suspend disabled, if back to back suspend/resume test is executed, at the end of test, sometimes console would appear to be frozen not responding to input. This would happen because, during resume, rx transactions can come in before system is ready, malfunction of rx happens in turn resulting in console appearing to be stuck. Do a stop_rx in suspend sequence to prevent this. Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Link: https://lore.kernel.org/r/1652692810-31148-1-git-send-email-quic_vnivarth@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find ↵Vijaya Krishna Nivarthi1-20/+36
suitable frequency with call to clk_round_rate. Replace the UART frequency table 'root_freq[]' with logic around clk_round_rate() so that SoC details like the available clk frequencies can change and this driver still works. This reduces tight coupling between this UART driver and the SoC clk driver because we no longer have to update the 'root_freq[]' array for new SoCs. Instead the driver determines the available frequencies at runtime. Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Link: https://lore.kernel.org/r/1652697510-30543-1-git-send-email-quic_vnivarth@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485Ilpo Järvinen1-4/+4
SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND relate to behavior within RS485 operation. The driver checks if they have the same value which is not possible to realize with the hardware. The check is taken regardless of SER_RS485_ENABLED flag and -EINVAL is returned when the check fails, which creates problems. This check makes it unnecessarily complicated to turn RS485 mode off as simple zeroed serial_rs485 struct will trigger that equal values check. In addition, the driver itself memsets its rs485 structure to zero when RS485 is disabled but if userspace would try to make an TIOCSRS485 ioctl() call with the very same struct, it would end up failing with -EINVAL which doesn't make much sense. Resolve the problem by moving the check inside SER_RS485_ENABLED block. Fixes: 7ecc77011c6f ("serial: 8250_fintek: Return -EINVAL on invalid configuration") Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/035c738-8ea5-8b17-b1d7-84a7b3aeaa51@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"AngeloGioacchino Del Regno1-7/+0
It was found that some MediaTek SoCs are incompatible with this change. Also, this register was mistakenly understood as it was related to the 16550A register layout selection but, at least on some IPs, if not all, it's related to something else unknown. This reverts commit 6f81fdded0d024c7d4084d434764f30bca1cd6b1. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Fixes: 6f81fdded0d0 ("serial: 8250_mtk: Make sure to select the right FEATURE_SEL") Reported-by: "kernelci.org bot" <bot@kernelci.org> Link: https://lore.kernel.org/r/20220510122620.150342-1-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: msm_serial: disable interrupts in __msm_console_write()John Ogness1-0/+5
__msm_console_write() assumes that interrupts are disabled, but with threaded console printers it is possible that the write() callback of the console is called with interrupts enabled. Explicitly disable interrupts using local_irq_save() to preserve the assumed context. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20220506213324.470461-1-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: meson: acquire port->lock in startup()John Ogness1-0/+13
The uart_ops startup() callback is called without interrupts disabled and without port->lock locked, relatively late during the boot process (from the call path of console_on_rootfs()). If the device is a console, it was already previously registered and could be actively printing messages. Since the startup() callback is reading/writing registers used by the console write() callback (AML_UART_CONTROL), its access must be synchronized using the port->lock. Currently it is not. The startup() callback is the only function that explicitly enables interrupts. Without the synchronization, it is possible that interrupts become accidentally permanently disabled. CPU0 CPU1 meson_serial_console_write meson_uart_startup -------------------------- ------------------ spin_lock(port->lock) val = readl(AML_UART_CONTROL) uart_console_write() writel(INT_EN, AML_UART_CONTROL) writel(val, AML_UART_CONTROL) spin_unlock(port->lock) Add port->lock synchronization to meson_uart_startup() to avoid racing with meson_serial_console_write(). Also add detailed comments to meson_uart_reset() explaining why it is *not* using port->lock synchronization. Link: https://lore.kernel.org/lkml/2a82eae7-a256-f70c-fd82-4e510750906e@samsung.com Fixes: ff7693d079e5 ("ARM: meson: serial: add MesonX SoC on-chip uart driver") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20220508103547.626355-1-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: 8250_dw: Use dev_err_probe()Andy Shevchenko1-17/+11
Simplify the error path in ->probe() a bit by using dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220509172129.37770-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: 8250_dw: Use devm_add_action_or_reset()Andy Shevchenko1-32/+31
Slightly simplify ->probe() and drop a few goto labels by using devm_add_action_or_reset() for clock and reset cleanup. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220509172129.37770-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: 8250_dw: Update the list of OF headers used by driverAndy Shevchenko1-2/+1
The of_irq.h and of_platform.h are not used by the driver. On the other hand, the mod_devicetable.h missed. Drop the former two and add the latter one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220509161911.37164-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: jsm: Use B0 instead of 0Ilpo Järvinen2-2/+2
Use B0 to check zero baudrate rather than literal 0. While at it, remove extra parenthesis around CBAUD. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220513082906.11096-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: fsl_lpuart: Remove unnecessary clearing for CRTSCTSIlpo Järvinen1-5/+3
if (termios->c_cflag & CRTSCTS) guarantees that CRTSCTS is not ever set in the else block so clearing it is unnecessary. While at it, remove also one pair of extra parenthesis. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220513082906.11096-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: remove CMSPAR ifdefsIlpo Järvinen4-16/+0
CMSPAR is defined by all architectures since commit 6bf08cb246b5 ("[PATCH] Add CMSPAR to termbits.h for powerpc and alpha"). Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220513082906.11096-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: serial: samsung_tty: Fix suspend/resume on S5LHector Martin1-0/+1
We were restoring the IRQ masks then clearing them again, because ucon_mask wasn't set properly. Adding that makes suspend/resume work as intended. Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20220502092505.30934-1-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: pmac_zilog: remove initial printJiri Slaby1-2/+0
Don't report about the driver when loaded. It's unneeded and frowned upon nowadays. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075653.31356-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: pmac_zilog: remove tracing printsJiri Slaby1-25/+1
Remove debug printouts upon function enter/exit. This can be achieved better by tracing. Remove also the one protected by DEBUG_HARD which is not defined anyway. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075653.31356-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: pmac_zilog: remove unused uart_pmac_port::termios_cacheJiri Slaby2-4/+0
struct uart_pmac_port contains termios_cache. It is only written and never read. Remove it as it only occupies space. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075653.31356-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: pmac_zilog: remove unfinished DBDMA supportJiri Slaby2-46/+1
The support for DBDMA was never completed. Remove the the code that only maps spaces without real work. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075653.31356-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: amba-pl011: move header content to .cJiri Slaby2-37/+30
There is no point keeping the header content separated. In this case, it is only an enum. So move the enum to the appropriate source file. Cc: Russell King <linux@armlinux.org.uk> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075720.31402-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-16Merge 5.18-rc7 into usb-nextGreg Kroah-Hartman3-21/+31
We need the tty fixes in here as well, as we need to revert one of them :( Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05fsl_lpuart: Don't enable interrupts too earlyIndan Zupancic1-9/+9
If an irq is pending when devm_request_irq() is called, the irq handler will cause a NULL pointer access because initialisation is not done yet. Fixes: 9d7ee0e28da59 ("tty: serial: lpuart: avoid report NULL interrupt") Cc: stable <stable@vger.kernel.org> Signed-off-by: Indan Zupancic <Indan.Zupancic@mep-info.com> Link: https://lore.kernel.org/r/20220505114750.45423-1-Indan.Zupancic@mep-info.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250_mtk: Fix register address for XON/XOFF characterAngeloGioacchino Del Regno1-2/+5
The XON1/XOFF1 character registers are at offset 0xa0 and 0xa8 respectively, so we cannot use the definition in serial_port.h. Fixes: bdbd0a7f8f03 ("serial: 8250-mtk: modify baudrate setting") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427132328.228297-4-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250_mtk: Make sure to select the right FEATURE_SELAngeloGioacchino Del Regno1-0/+7
Set the FEATURE_SEL at probe time to make sure that BIT(0) is enabled: this guarantees that when the port is configured as AP UART, the right register layout is interpreted by the UART IP. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427132328.228297-3-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05serial: 8250_mtk: Fix UART_EFR register addressAngeloGioacchino Del Regno1-7/+8
On MediaTek SoCs, the UART IP is 16550A compatible, but there are some specific quirks: we are declaring a register shift of 2, but this is only valid for the majority of the registers, as there are some that are out of the standard layout. Specifically, this driver is using definitions from serial_reg.h, where we have a UART_EFR register defined as 2: this results in a 0x8 offset, but there we have the FCR register instead. The right offset for the EFR register on MediaTek UART is at 0x98, so, following the decimal definition convention in serial_reg.h and accounting for the register left shift of two, add and use the correct register address for this IP, defined as decimal 38, so that the final calculation results in (0x26 << 2) = 0x98. Fixes: bdbd0a7f8f03 ("serial: 8250-mtk: modify baudrate setting") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427132328.228297-2-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()Yang Yingliang1-3/+2
It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: 5930cb3511df ("serial: driver for Conexant Digicolor USART") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Baruch Siach <baruch@tkos.co.il> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220505124621.1592697-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-03-18 05:58:52 +0000