summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2022-10-14Merge tag 'parisc-for-6.1-1' of ↵Linus Torvalds1-15/+0
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "Fixes: - When we added basic vDSO support in kernel 5.18 we introduced a bug which prevented a mmap() of graphic card memory. This is because we used the DMB (data memory break trap bit) page flag as special-bit, but missed to clear that bit when loading the TLB. - Graphics card memory size was not correctly aligned - Spelling fixes (from Colin Ian King) Enhancements: - PDC console (which uses firmware calls) now rewritten as early console - Reduced size of alternative tables" * tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix spelling mistake "mis-match" -> "mismatch" in eisa driver parisc: Fix userspace graphics card breakage due to pgtable special bit parisc: fbdev/stifb: Align graphics memory size to 4MB parisc: Convert PDC console to an early console parisc: Reduce kernel size by packing alternative tables
2022-10-11parisc: Convert PDC console to an early consoleHelge Deller1-15/+0
Rewrite the PDC console to become an early console. Beside the fact that now boot information is visible until another (text- or graphics) console takes over, this benefits as well machines with a yet-unsupported STI console and kgdb. Signed-off-by: Helge Deller <deller@gmx.de>
2022-10-07Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-09-30tty: serial: allow pxa.c to be COMPILE_TESTedJiri Slaby1-1/+1
There is no issue compiling pxa.c even in the SERIAL_8250=y case. So to cover it in the usual configurations, add "|| COMPILE_TEST" there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220927110528.12815-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMELSergiu Moga1-0/+1
Now that the driver makes use of `__clk_is_enabled()` in order to know whether a `clk_disable_unprepare()` is needed or not on the GCLK, a new dependency has been introduced: COMMON_CLK. If this `CONFIG_COMMON_CLK` is not enabled, whatever config may have this driver enabled without COMMON_CLK then an undefined reference to `__clk_is_enabled()` will be issued by the linker. Thus, make sure that, unless `CONFIG_COMMON_CLK` is enabled, this driver is not compiled. Fixes: 5e3ce1f26129 ("tty: serial: atmel: Make the driver aware of the existence of GCLK") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220926143244.485578-1-sergiu.moga@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependencyJindong Yue1-1/+1
Remove the limitation of SERIAL_FSL_LPUART=y, as we may need enable this console while SERIAL_FSL_LPUART=m. Signed-off-by: Jindong Yue <jindong.yue@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20220802101613.30879-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-15arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCAWilliam Zhang1-2/+2
With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files. Signed-off-by: William Zhang <william.zhang@broadcom.com> Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c) Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset) Link: https://lore.kernel.org/r/20220803175455.47638-7-william.zhang@broadcom.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-08Merge tag 'tty-6.0-rc1' of ↵Linus Torvalds1-17/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.0-rc1. It was delayed from last week as I wanted to make sure the last commit here got some good testing in linux-next and elsewhere as it seemed to show up only late in testing for some reason. Nothing major here, just lots of cleanups from Jiri and Ilpo to make the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also included in here is the obligatory n_gsm updates from Daniel Starke and lots of tiny driver updates and minor fixes and tweaks for other smaller serial drivers. All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements tty: amiserial: Fix comment typo tty: serial: document uart_get_console() tty: serial: serial_core, reformat kernel-doc for functions Documentation: serial: link uart_ops properly Documentation: serial: move GPIO kernel-doc to the functions Documentation: serial: dedup kernel-doc for uart functions Documentation: serial: move uart_ops documentation to the struct dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126 serial: mvebu-uart: uart2 error bits clearing tty: serial: fsl_lpuart: correct the count of break characters serial: stm32: make info structs static to avoid sparse warnings serial: fsl_lpuart: zero out parity bit in CS7 mode tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate. serial: 8250_bcm2835aux: Add missing clk_disable_unprepare() tty: vt: initialize unicode screen buffer serial: remove VR41XX serial driver serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags serial: 8250_dwlib: remove redundant sanity check for RS485 flags dt_bindings: rs485: Correct delay values ...
2022-07-16serial: remove VR41XX serial driverThomas Bogendoerfer1-17/+0
Commit d3164e2f3b0a ("MIPS: Remove VR41xx support") removed support for MIPS VR41xx platform, so remove exclusive drivers for this platform, too. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: https://lore.kernel.org/r/20220715140322.135825-1-tsbogend@alpha.franken.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-11tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCAWilliam Zhang1-2/+2
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make SERIAL_BCM63XX depending on ARCH_BCMBCA. Signed-off-by: William Zhang <william.zhang@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-06-10serial: max310x: implement I2C supportCosmin Tanislav1-0/+1
I2C implementation on this chip has a few key differences compared to SPI, as described in previous patches. * extended register space access needs no extra logic * slave address is used to select which UART to communicate with To accommodate these differences, add an I2C interface config, set the RevID register address and implement an empty method for setting the GlobalCommand register, since no special handling is needed for the extended register space. To handle the port-specific slave address, create an I2C dummy device for each port, except the base one (UART0), which is expected to be the one specified in firmware, and create a regmap for each I2C device. Add minimum and maximum slave addresses to each devtype for sanity checking. Also, use a separate regmap config with no write_flag_mask, since I2C has a R/W bit in its slave address, and set the max register to the address of the RevID register, since the extended register space needs no extra logic. Finally, add the I2C driver. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20220605144659.4169853-5-demonsingur@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-03Merge tag 'tty-5.19-rc1' of ↵Linus Torvalds1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.19-rc1. Lots of tiny cleanups in here, the major stuff is: - termbit cleanups and unification by Ilpo. A much needed change that goes a long way to making things simpler for all of the different arches - tty documentation cleanups and movements to their own place in the documentation tree - old tty driver cleanups and fixes from Jiri to bring some existing drivers into the modern world - RS485 cleanups and unifications to make it easier for individual drivers to support this mode instead of having to duplicate logic in each driver - Lots of 8250 driver updates and additions - new device id additions - n_gsm continued fixes and cleanups - other minor serial driver updates and cleanups All of these have been in linux-next for weeks with no reported issues" * tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits) tty: Rework receive flow control char logic pcmcia: synclink_cs: Don't allow CS5-6 serial: stm32-usart: Correct CSIZE, bits, and parity serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 serial: sifive: Sanitize CSIZE and c_iflag serial: sh-sci: Don't allow CS5-6 serial: txx9: Don't allow CS5-6 serial: rda-uart: Don't allow CS5-6 serial: digicolor-usart: Don't allow CS5-6 serial: uartlite: Fix BRKINT clearing serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE serial: core: Do stop_rx in suspend path for console if console_suspend is disabled tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate. dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485 Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL" serial: msm_serial: disable interrupts in __msm_console_write() serial: meson: acquire port->lock in startup() serial: 8250_dw: Use dev_err_probe() serial: 8250_dw: Use devm_add_action_or_reset() ...
2022-04-22serial: stm32: add earlycon supportValentin Caron1-0/+1
Add early console support in stm32 uart driver. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20220419085330.1178925-4-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22serial: allow COMPILE_TEST for some driversJiri Slaby1-3/+3
Some more serial drivers can be compile-tested under certain circumstances (when building a specific architecture). So allow for that. This reduces the need of zillion mach/subarch-specific configs. And since the 0day bot has only allmodconfig's for some archs, this increases build coverage there too. Note that cpm needs a minor update in the header, so that it drags in at least some defines (CPM2 ones). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220421101708.5640-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22serial: pic32: make SERIAL_PIC32_CONSOLE depend on SERIAL_PIC32=yJiri Slaby1-1/+1
pic32_uart contains this: #ifdef CONFIG_SERIAL_PIC32_CONSOLE ... console_initcall(pic32_console_init); ... core_initcall(pic32_late_console_init); ... #endif ... arch_initcall(pic32_uart_init); When the driver is built as module, all three above become module_init(). So if SERIAL_PIC32_CONSOLE is set while SERIAL_PIC32=m, it results in the following build error: In file included from include/linux/device/driver.h:21, from include/linux/device.h:32, from include/linux/platform_device.h:13, from drivers/tty/serial/pic32_uart.c:12: include/linux/module.h:131:49: error: redefinition of '__inittest' So make sure SERIAL_PIC32_CONSOLE can be set only when SERIAL_PIC32=y -- similar as for other drivers. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220421101708.5640-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-04Merge branch 'remove-h8300' of git://git.infradead.org/users/hch/misc into ↵Arnd Bergmann1-3/+2
asm-generic * 'remove-h8300' of git://git.infradead.org/users/hch/misc: remove the h8300 architecture This is clearly the least actively maintained architecture we have at the moment, and probably the least useful. It is now the only one that does not support MMUs at all, and most of the boards only support 4MB of RAM, out of which the defconfig kernel needs more than half just for .text/.data. Guenter Roeck did the original patch to remove the architecture in 2013 after it had already been obsolete for a while, and Yoshinori Sato brought it back in a much more modern form in 2015. Looking at the git history since the reinstantiation, it's clear that almost all commits in the tree are build fixes or cross-architecture cleanups: $ git log --no-merges --format=%an v4.5.. arch/h8300/ | sort | uniq -c | sort -rn | head -n 12 25 Masahiro Yamada 18 Christoph Hellwig 14 Mike Rapoport 9 Arnd Bergmann 8 Mark Rutland 7 Peter Zijlstra 6 Kees Cook 6 Ingo Molnar 6 Al Viro 5 Randy Dunlap 4 Yury Norov Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-18tty: serial: samsung: Add ARTPEC-8 supportVincent Whitchurch1-1/+1
Add support for the UART block on the ARTPEC-8 SoC. This is closely related to the variants used on the Exynos chips. The register layout is identical to Exynos850 et al but the fifo size is different (64 bytes in each direction for all instances). Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220311094515.3223023-3-vincent.whitchurch@axis.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18tty: serial: bcm63xx: use more precise Kconfig symbolRafał Miłecki1-1/+2
Patches lowering SERIAL_BCM63XX dependencies led to a discussion and documentation change regarding "depends" usage. Adjust Kconfig entry to match current guidelines. Make this symbol available for relevant architectures only. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Ref: f35a07f92616 ("tty: serial: bcm63xx: lower driver dependencies") Ref: 18084e435ff6 ("Documentation/kbuild: Document platform dependency practises") Link: https://lore.kernel.org/r/20220311093233.10012-1-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUSGeert Uytterhoeven1-1/+1
Sunplus serial ports are only present on Sunplus SoCs. Hence add a dependency on ARCH_SUNPLUS, to prevent asking the user about this driver when configuring a kernel without Sunplus SoC support. Fixes: 9e8d5470325f25be ("serial: sunplus-uart: Add Sunplus SoC UART Driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/59f46272ab5b16853acac4d585c3333cfd394223.1647352195.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-01Revert "tty: serial: meson: *"Greg Kroah-Hartman1-1/+0
This reverts the following commits: 31979060cc07 tty: serial: meson: Fix the compile link error reported by kernel test robot 5427c352a993 tty: serial: meson: Added S4 SOC compatibility 19b2ba0baffc tty: serial: meson: The system stuck when you run the stty command on the console to change the baud rate e5fc2b99840d tty: serial: meson: Make some bit of the REG5 register writable 44023b8e1f14 tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame 6436dd8f9b25 tty: serial: meson: Use devm_ioremap_resource to get register mapped memory 841f913e770f tty: serial: meson: Move request the register region to probe They seem to cause lots of problems with existing hardware platforms, and caused build issues, so revert the whole series all at once. Link: https://lore.kernel.org/r/849a95fd-ae81-9a3b-0c06-dd7826af9eb2@baylibre.com Link: https://lore.kernel.org/all/20220225073922.3947-1-yu.tu@amlogic.com/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Yu Tu <yu.tu@amlogic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28tty: serial: meson: Fix the compile link error reported by kernel test robotYu Tu1-0/+1
Describes the calculation of the UART baud rate clock using a clock frame. Forgot to add in Kconfig kernel test Robot compilation error due to COMMON_CLK dependency. Fixes: 44023b8e1f14 ("tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Yu Tu <yu.tu@amlogic.com> Link: https://lore.kernel.org/r/20220228064910.11636-1-yu.tu@amlogic.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-26serial: sunplus-uart: Add Sunplus SoC UART DriverHammer Hsieh1-0/+25
Add Sunplus SoC UART Driver. SP7021 UART block contains 5 UARTs. There are UART0~4 that supported in SP7021, the features list as below. Support Full-duplex communication. Support data packet length configurable. Support stop bit number configurable. Support force break condition. Support baud rate configurable. Support error detection and report. Support RXD Noise Rejection Vote configurable. UART0 pinout only support TX/RX two pins. UART1 to UART4 pinout support TX/RX/CTS/RTS four pins. Normally UART0 used for kernel console, also can be used for normal uart. Command line set "console=ttySUP0,115200", SUP means Sunplus Uart Port. UART driver probe will create path named "/dev/ttySUPx". https://sunplus.atlassian.net/wiki/spaces/doc/pages/1873412290/13.+Universal+Asynchronous+Receiver+Transmitter+UART Signed-off-by: Hammer Hsieh <hammerh0314@gmail.com> Link: https://lore.kernel.org/r/1645522563-17183-3-git-send-email-hammerh0314@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-25serial: mvebu-uart: implement UART clock driver for configuring UART base clockPali Rohár1-0/+1
Implement a new device driver for controlling UART clocks on Marvell Armada 3700 SoC. This device driver is loaded for devices which match the compatible string "marvell,armada-3700-uart-clock". There are more pitfalls related to UART clocks: - both UARTs use same parent clock source (which can be xtal or one of the TBG clocks), - if a TBG clock is used as the parent clock, there are two additional divisors that can both be configured to divide the rate by 1, 2, ... 6, but these divisors are again shared between the two UART controllers on the SOC, - the configuration of the parent clock source and divisors is done in the address space of the first UART controller, UART1. Clocks can be gated separately for UART1 and UART2, but this setting also lives in the address space of UART1, - Marvell's Functional Specification for Armada 3720 document has the clock gating bits swapped, so the one described to gate UART1 clock actually gates UART2 and vice versa, - each UART has it's own "special divisor", and this uses the parent clock described above. These divisors are configure in each UART's address space separately. Thus the driver for UART2 controller needs to have access to UART1 address space, since UART1 address space contains some bits exclusive for UART2 and also some bits which are shared between UART1 and UART2. Also, during boot, when early console is active on one of the UARTs, and we want to switch parent clock from xtal (default) to TBG (to be more flexible with baudrates), the driver changing UART clocks also needs to be able to change the "special divisor", so that the baudrate of earlycon is not changed when swtiching to normal console. Thus the clock driver also needs to be able to access UART2 register space, for UART2's "special divisor". For these reasons, this new UART clock driver does not use ioremap_resource(), but only ioremap() to prevent resource conflicts between UART clock driver and UART driver. We need to share only two 32-bit registers between the UART driver and the UART clock driver: - UART Clock Control - UART 2 Baud Rate Divisor Access to these two registers are protected by one spinlock to prevent any conflicts. Access is required only during probing, when changing baudrate or during suspend/resume. Hardware can be configured to use one of following clocks as UART parent clock: TBG-A-P, TBG-B-P, TBG-A-S, TBG-B-S, xtal. Not every clock is usable for higher buadrates. Any subset can be specified in the device-tree and the driver will choose the best one which also still supports the mandatory baudrate of 9600 Bd. For smooth boot log output it is needed to specify clock used by early console, otherwise garbage would be printed on UART during probe of UART clock driver and transitioning from early console to normal console. We are implementing this to be able to configure TBG clock as UART parent clock, which is required to be able to achieve higher baudrates than 230400 Bd. We achieve this by referencing this new UART clock device node in UART's device node. UART clock device driver automatically chooses the best clock source for UART driver. Until now, UART's device-tree node needed to reference one of the static clocks (xtal or one of the TBGs) as parent clock in the `clocks` phandle - the parent clock which was configured before booting the kernel. If bootloader changed UART's parent clock, it needed to change the `clocks` phandle in DTB correspondingly before booting. From now on both the old mechanism (xtal or TBG referenced as parent clock in `clocks` phandle) and the new one (UART clock referenced in the `clocks` phandle) are supported, to provide full backward compatibility with existing DTS files, full backward compatibility with existing boot loaders, and to provide new features (runtime clock configuration to allow higher baudrates than 230400 Bd). New features are available only with new DTS files. There was also a discussion about how the UART node and the clock-controller node could be wrapped together in a new binding [1, 2]. As explained there, this is not possible if we want to keep backwards compatibility with existing bootloaders, and thus we are doing this by putting the UART clock-controller node inside the UART1 node. [1] https://lore.kernel.org/linux-serial/20220120000651.in7s6nazif5qjkme@pali/ [2] https://lore.kernel.org/linux-serial/20220125204006.A6D09C340E0@smtp.kernel.org/ Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20220219152818.4319-4-kabel@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23remove the h8300 architectureChristoph Hellwig1-3/+2
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-02-21tty: serial: atmel: add earlycon supportMichael Walle1-0/+1
Add early console support which relies on the bootloader for the initialization of the UART. Please note, that the compatibles are taken from at91-usart MFD driver. Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220217094620.1148571-1-michael@walle.cc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20tty: serial: samsung: Enable console as moduleSam Protsenko1-1/+1
Enable serial driver to be built as a module. To do so, init the console support on driver/module load instead of using console_initcall(). Inspired by commit 87a0b9f98ac5 ("tty: serial: meson: enable console as module"). Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211204195757.8600-5-semen.protsenko@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25serial: liteuart: relax compile-test dependenciesJohan Hovold1-1/+1
The LITEX symbol is neither a build or runtime dependency for the liteuart serial driver. LITEX is selected by the "LiteX SoC Controller" driver, which does a probe-time register-access sanity check and panics if the SoC has not been configured correctly. That driver's Kconfig entry asserts that any LiteX driver using the LiteX register accessors should depend on LITEX, but currently only the serial driver complies. Relax this LITEX "dependency" in order to make it easier to compile test the driver. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211117100512.5058-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05tty: serial: samsung: describe driver in KConfigKrzysztof Kozlowski1-4/+5
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210924133040.111706-1-krzysztof.kozlowski@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-29serial: omap: Only allow if 8250_omap is not selectedTony Lindgren1-1/+1
For years we've been carrying legacy omap-serial in addition to 8250_omap driver and 8250_omap should be used instead. Let's finally start planning on removing omap-serial by first not building it if 8250_omap is selected to save some memory. The defconfigs have switched over to using 8250_omap, and we have a fixup in place for the the serial console since commit 00648d0282dc ("tty: serial: 8250: omap: add ttySx console if the user didn't"). So people updating their systems without omap-serial will see boot time warnings on what is going on. Cc: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: Dario Binacchi <dariobin@libero.it> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210727103149.51175-2-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21tty: serial: Fix spelling mistake "Asychronous" -> "Asynchronous"Colin Ian King1-1/+1
There is a spelling mistake in the Kconfig text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210719102421.14813-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24Revert "tty: serial: Add UART driver for Cortina-Access platform"Greg Kroah-Hartman1-19/+0
This reverts commit b61c8bf4694b5115766849378dcb8787ff54e65e. It never made it to a public mailing list and still needs some work based on the review comments. So revert it for now. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/CAMuHMdXA9-ajoAza2JAW5879ECieMm1dbBbKHgJhDa7=3kWu3w@mail.gmail.com Cc: Jason Li <jason.li@cortina-access.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18tty: serial: Add UART driver for Cortina-Access platformJason Li1-0/+19
This driver supports Cortina Access UART IP integrated in most all CAXXXX line of SoCs. Earlycom is also supported Signed-off-by: Jason Li <jason.li@cortina-access.com> Link: https://lore.kernel.org/r/20210615165750.31261-1-alex.nemirovsky@cortina-access.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-20serial: liteuart: Add support for earlyconStafford Horne1-0/+1
Most litex boards using RISC-V soft cores us the sbi earlycon, however this is not available for non RISC-V litex SoC's. This patch enables earlycon for liteuart which is available on all Litex SoC's making support for earycon debugging more widely available. Cc: Florent Kermarrec <florent@enjoy-digital.fr> Cc: Mateusz Holenko <mholenko@antmicro.com> Cc: Joel Stanley <joel@jms.id.au> Cc: Gabriel L. Somlo <gsomlo@gmail.com> Reviewed-and-tested-by: Gabriel Somlo <gsomlo@gmail.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stafford Horne <shorne@gmail.com> Link: https://lore.kernel.org/r/20210517115453.24365-1-shorne@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22serial: extend compile-test coverageJohan Hovold1-8/+10
Allow more drivers to be compile tested more easily, for example, when doing subsystem-wide changes. Verified on X86_64 as well as arm, powerpc and m68k with minimal configs in order to catch missing implicit build dependencies (e.g. MAILBOX for SERIAL_TEGRA_TCU). Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210422080211.29326-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10tty: serial: samsung_tty: Add support for Apple UARTsHector Martin1-1/+1
Apple SoCs are a distant descendant of Samsung designs and use yet another variant of their UART style, with different interrupt handling. In particular, this variant has the following differences with existing ones: * It includes a built-in interrupt controller with different registers, using only a single platform IRQ * Internal interrupt sources are treated as edge-triggered, even though the IRQ output is level-triggered. This chiefly affects the TX IRQ path: the driver can no longer rely on the TX buffer empty IRQ immediately firing after TX is enabled, but instead must prime the FIFO with data directly. Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210304213902.83903-25-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10drivers: tty: serial: IMX_EARLYCON: fix Kconfig dependency on SERIAL_COREJulian Braha1-0/+1
When SERIAL_IMX_EARLYCON is enabled, and SERIAL_CORE is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for SERIAL_EARLYCON Depends on [n]: TTY [=y] && HAS_IOMEM [=y] && SERIAL_CORE [=n] Selected by [y]: - SERIAL_IMX_EARLYCON [=y] && TTY [=y] && HAS_IOMEM [=y] && (ARCH_MXC [=y] || COMPILE_TEST [=n]) && OF [=y] This is because SERIAL_IMX_EARLYCON selects SERIAL_EARLYCON, without selecting SERIAL_CORE, despite that config option depending on SERIAL_CORE. Signed-off-by: Julian Braha <julianbraha@gmail.com> Link: https://lore.kernel.org/r/20210225044248.4745-1-julianbraha@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26serial: ifx6x60: Remove driver for deprecated platformAndy Shevchenko1-7/+0
Intel Moorestown and Medfield are quite old Intel Atom based 32-bit platforms, which were in limited use in some Android phones, tablets and consumer electronics more than eight years ago. There are no bugs or problems ever reported outside from Intel for breaking any of that platforms for years. It seems no real users exists who run more or less fresh kernel on it. The commit 05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align with this theory. Due to above and to reduce a burden of supporting outdated drivers we remove the support of outdated platforms completely. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210125150238.16980-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-20serial: remove sirf prima/atlas driverArnd Bergmann1-22/+0
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210120161324.3728294-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-15tty: serial: Drop unused efm32 serial driverUwe Kleine-König1-13/+0
Support for this machine was just removed, so drop the now unused UART driver, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210115155130.185010-7-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-17Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds1-0/+32
Pull OpenRISC updates from Stafford Horne: - New drivers and OpenRISC support for the LiteX platform - A bug fix to support userspace gdb debugging - Fixes one compile issue with blk-iocost * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: add local64.h to fix blk-iocost build openrisc: fix trap for debugger breakpoint signalling openrisc: add support for LiteX drivers/tty/serial: add LiteUART driver dt-bindings: serial: document LiteUART bindings drivers/soc/litex: add LiteX SoC Controller driver dt-bindings: soc: document LiteX SoC Controller bindings dt-bindings: vendor: add vendor prefix for LiteX
2020-12-11tty: serial: meson: enable console as moduleKevin Hilman1-1/+1
Enable serial driver to be built as a module. To do so, init the console support on driver/module load instead of using console_initcall(). Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201211005744.12855-1-khilman@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-26tty: serial: bcm63xx: lower driver dependenciesRafał Miłecki1-1/+1
Hardware supported by bcm63xx is also used by BCM4908 SoCs family that is ARM64. In future more architectures may need it as well. There is nothing arch specific breaking compilation so just stick to requiring COMMON_CLK. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20201125090608.28442-1-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-09drivers/tty/serial: add LiteUART driverFilip Kokosinski1-0/+32
This commit adds driver for the FPGA-based LiteUART serial controller from LiteX SoC builder. The current implementation supports LiteUART configured for 32 bit data width and 8 bit CSR bus width. It does not support IRQ. Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com> Signed-off-by: Mateusz Holenko <mholenko@antmicro.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2020-11-09Merge 5.10-rc3 into tty-nextGreg Kroah-Hartman1-0/+1
We need the TTY/vt/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: imx: enable earlycon by default if IMX_SERIAL_CONSOLE is enabledLucas Stach1-0/+1
Since 699cc4dfd140 (tty: serial: imx: add imx earlycon driver), the earlycon part of imx serial is a separate driver and isn't necessarily enabled anymore when the console is enabled. This causes users to loose the earlycon functionality when upgrading their kenrel configuration via oldconfig. Enable earlycon by default when IMX_SERIAL_CONSOLE is enabled. Fixes: 699cc4dfd140 (tty: serial: imx: add imx earlycon driver) Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20201105204026.1818219-1-l.stach@pengutronix.de Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: remove pnx8xxx uart driverThomas Bogendoerfer1-16/+0
Commit 625326ea9c84 ("MIPS: Remove PNX833x alias NXP_STB22x") removed support for PNX833x, so it's time to remove serial driver, too. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: https://lore.kernel.org/r/20201106130332.103476-1-tsbogend@alpha.franken.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-1/+1
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-09-27tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=nYang Yingliang1-0/+1
aarch64-linux-gnu-ld: drivers/tty/serial/imx_earlycon.o: in function `imx_uart_console_early_write': imx_earlycon.c:(.text+0x84): undefined reference to `uart_console_write' The driver uses the uart_console_write(), but SERIAL_CORE_CONSOLE is not selected, so uart_console_write is not defined, then we get the error. Fix this by selecting SERIAL_CORE_CONSOLE. Fixes: 699cc4dfd140 ("tty: serial: imx: add imx earlycon driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20200919063240.2754965-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-13Merge tag 'samsung-soc-s3c-5.10' of ↵Olof Johansson1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung S3C24xx and S3C64xx machine code cleanup for v5.10 Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it also touches files shared with S5Pv210 and Exynos. This is mostly Arnd Bergmann work which Krzysztof Kozlowski took over, rebased and polished. The goal is to cleanup, merge and finally make the Samsung S3C24xx and S3C64xx architectures multiplatform. The multiplatform did not happen yet here - just cleaning up and merging into one arch/arm/mach-s3c directory. However this is step forward for multiplatform or at least to keep this code still maintainable. This pulls also branch with changes for Samsung SoC sound drivers from broonie/sound because the cleanups there were part of this series and all further patches depend on them. * tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits) ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup ARM: s3c: Cleanup from old plat-samsung include ARM: s3c: make headers local if possible ARM: s3c: move into a common directory ARM: s3c24xx: stop including mach/hardware.h from mach/io.h cpufreq: s3c24xx: move low-level clk reg access into platform code cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh ARM: s3c: remove cpufreq header dependencies cpufreq: s3c24xx: split out registers fbdev: s3c2410fb: remove mach header dependency ARM: s3c24xx: bast: avoid irq_desc array usage ARM: s3c24xx: spi: avoid hardcoding fiq number in driver ARM: s3c24xx: include mach/irqs.h where needed ARM: s3c24xx: move s3cmci pinctrl handling into board files ARM: s3c24xx: move iis pinctrl config into boards ARM: s3c24xx: move spi fiq handler into platform ARM: s3c: adc: move header to linux/soc/samsung ARM: s3c24xx: move irqchip driver back into platform ARM: s3c24xx: move regs-spi.h into spi driver ARM: s3c64xx: remove mach/hardware.h ... Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-04tty: serial: earlycon dependencyTong Zhang1-0/+1
parse_options() in drivers/tty/serial/earlycon.c calls uart_parse_earlycon in drivers/tty/serial/serial_core.c therefore selecting SERIAL_EARLYCON should automatically select SERIAL_CORE, otherwise will result in symbol not found error during linking if SERIAL_CORE is not configured as builtin Fixes: 9aac5887595b ("tty/serial: add generic serial earlycon") Signed-off-by: Tong Zhang <ztong0001@gmail.com> Link: https://lore.kernel.org/r/20200828123949.2642-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-14 17:40:52 +0000