summaryrefslogtreecommitdiffstats
path: root/drivers/thunderbolt
AgeCommit message (Collapse)AuthorFilesLines
2018-05-15thunderbolt: Handle NULL boot ACL entries properlyMika Westerberg1-1/+1
If the boot ACL entry is already NULL we should not fill in the upper two DWs with 0xfffffffff. Otherwise they are not shown as empty entries when the sysfs attribute is read. Fixes: 9aaa3b8b4c56 ("thunderbolt: Add support for preboot ACL") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <yehezkelshb@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14thunderbolt: Prevent crash when ICM firmware is not runningMika Westerberg1-0/+3
On Lenovo ThinkPad Yoga 370 (and possibly some other Lenovo models as well) the Thunderbolt host controller sometimes comes up in such way that the ICM firmware is not running properly. This is most likely an issue in BIOS/firmware but as side-effect driver crashes the kernel due to NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at 0000000000000980 IP: pci_write_config_dword+0x5/0x20 Call Trace: pcie2cio_write+0x3b/0x70 [thunderbolt] icm_driver_ready+0x168/0x260 [thunderbolt] ? tb_ctl_start+0x50/0x70 [thunderbolt] tb_domain_add+0x73/0xf0 [thunderbolt] nhi_probe+0x182/0x300 [thunderbolt] local_pci_probe+0x42/0xa0 ? pci_match_device+0xd9/0x100 pci_device_probe+0x146/0x1b0 driver_probe_device+0x315/0x480 ... Instead of crashing update the driver to bail out gracefully if we encounter such situation. Fixes: f67cf491175a ("thunderbolt: Add support for Internal Connection Manager (ICM)") Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Cc: stable@vger.kernel.org
2018-03-09thunderbolt: Add support for Intel Titan RidgeRadion Mirchevsky6-15/+546
Intel Titan Ridge is the next Thunderbolt 3 controller. The ICM firmware message format in Titan Ridge differs from Falcon Ridge and Alpine Ridge somewhat because it is using route strings addressing devices. In addition to that the DMA port of 4-channel (two port) controller is in different port number than the previous controllers. There are some other minor differences as well. This patch add support for Intel Titan Ridge and the new ICM firmware message format. Signed-off-by: Radion Mirchevsky <radion.mirchevsky@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-03-09thunderbolt: Introduce USB only (SL4) security levelMika Westerberg1-1/+6
This new security level works so that it creates one PCIe tunnel to the connected Thunderbolt dock, removing PCIe links downstream of the dock. This leaves only the internal USB controller visible. Display Port tunnels are created normally. While there make sure security sysfs attribute returns "unknown" for any future security level. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Add support for preboot ACLMika Westerberg4-10/+310
Preboot ACL is a mechanism that allows connecting Thunderbolt devices boot time in more secure way than the legacy Thunderbolt boot support. As with the legacy boot option, this also needs to be enabled from the BIOS before booting is allowed. Difference to the legacy mode is that the userspace software explicitly adds device UUIDs by sending a special message to the ICM firmware. Only the devices listed in the boot ACL are connected automatically during the boot. This works in both "user" and "secure" security levels. We implement this in Linux by exposing a new sysfs attribute (boot_acl) below each Thunderbolt domain. The userspace software can then update the full list as needed. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Add 'boot' attribute for devicesYehezkel Bernat4-4/+25
In various cases, Thunderbolt device can be connected by ICM on boot without waiting for approval from user. Most cases are related to OEM-specific BIOS configurations. This information is interesting for user-space as if the device isn't in SW ACL, it may create a friction in the user experience where the device is automatically authorized if it's connected on boot but requires an explicit user action if connected after OS is up. User-space can use this information to suggest adding the device to SW ACL for auto-authorization on later connections. Signed-off-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Move driver ready handling to struct icmMika Westerberg2-13/+35
Intel Titan Ridge uses slightly different format for ICM driver ready response, so add a new ->driver_ready() callback to struct icm and move the existing handling to a separate function which we then use in Falcon Ridge and Alpine Ridge. No functional changes intended. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Add constant for approval timeoutMika Westerberg1-2/+3
We will be using this from Titan Ridge support code as well so make it constant. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Add tb_xdomain_find_by_route()Radion Mirchevsky1-12/+35
This is needed by the new ICM interface to find xdomains by route string instead of link and depth. While there update existing tb_xdomain_find_* functions to use tb_xdomain_get() instead of open-coding the same. Signed-off-by: Radion Mirchevsky <radion.mirchevsky@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Add tb_switch_find_by_route()Radion Mirchevsky2-0/+34
With the new ICM messaging there is need for find switch by route string instead of link and depth. Add new function that makes it possible. Signed-off-by: Radion Mirchevsky <radion.mirchevsky@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Add tb_switch_get()Mika Westerberg1-0/+7
Sometimes there is need for increasing reference count of a switch as well. This also follows what we have for xdomains. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Correct function name in kernel-doc commentRadion Mirchevsky1-1/+1
Use correct name in kernel-doc of tb_switch_find_by_uuid(). Signed-off-by: Radion Mirchevsky <radion.mirchevsky@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Factor common ICM add and update operations outMika Westerberg1-49/+87
The newer ICM will not use link and depth to address devices. Instead it uses route strings. In order to take advantage of the existing code factor out common operations so that we can use the same functions with the new ICM as well. No functional changes intended. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Handle rejected Thunderbolt devicesMika Westerberg2-0/+7
The ICM firmware rejects devices if the maximum topology limit is exceeded (more than 6 devices are connected). If that happens just log a message to the kernel message buffer and bail out. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Wait a bit longer for ICM to authenticate the active NVMMika Westerberg1-2/+5
Sometimes during cold boot ICM has not yet authenticated the active NVM image leading to timeout and failing the driver probe. Allow ICM to take some more time and increase the timeout to 3 seconds before we give up. While there fix icm_firmware_init() to return the real error code without overwriting it with -ENODEV. Fixes: f67cf491175a ("thunderbolt: Add support for Internal Connection Manager (ICM)") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org
2018-03-09thunderbolt: Wait a bit longer for root switch config spaceMika Westerberg1-1/+2
In some case reading root switch config space takes longer than what we are currently waiting in the driver resulting timeout and failure. Increase number of retries to allow some more time for the root switch config space to become accesssible. Also log an error if the timeout is exceeded so we know why the driver probe failed. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Do not overwrite error code when domain adding failsMika Westerberg1-1/+1
If the Thunderbolt domain adding fails for some reason we currently always return -EIO instead of the real error code. To make debugging easier return the actual error code instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-03-09thunderbolt: Handle connecting device in place of host properlyMika Westerberg1-9/+17
If the system is suspended and user disconnects cable to another host and connects it to a Thunderbolt device instead we get a warning from driver core about adding duplicate sysfs attribute and adding the new device fails. Handle this properly so that we first remove the existing XDomain connection before adding new devices. Fixes: d1ff70241a27 ("thunderbolt: Add support for XDomain discovery protocol") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org
2018-03-09thunderbolt: Serialize PCIe tunnel creation with PCI rescanMika Westerberg1-0/+9
We need to make sure a new PCIe tunnel is not created in a middle of previous PCI rescan because otherwise the rescan code might find too much and fail to reconfigure devices properly. This is important when native PCIe hotplug is used. In BIOS assisted hotplug there should be no such issue. Fixes: f67cf491175a ("thunderbolt: Add support for Internal Connection Manager (ICM)") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2018-03-09thunderbolt: Resume control channel after hibernation image is createdMika Westerberg1-0/+1
The driver misses implementation of PM hook that undoes what ->freeze_noirq() does after the hibernation image is created. This means the control channel is not resumed properly and the Thunderbolt bus becomes useless in later stages of hibernation (when the image is stored or if the operation fails). Fix this by pointing ->thaw_noirq to driver nhi_resume_noirq(). This makes sure the control channel is resumed properly. Fixes: 23dd5bb49d98 ("thunderbolt: Add suspend/hibernate support") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org
2017-12-16thunderbolt: Mask ring interrupt properly when polling startsMika Westerberg1-1/+1
When ring enters polling mode we are expected to mask the ring interrupt before the callback is called. However, the current code actually unmasks it probably because of a copy-paste mistake. Mask the interrupt properly from now on. Fixes: 4ffe722eefcb ("thunderbolt: Add polling mode for rings") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-16Merge tag 'char-misc-4.15-rc1' of ↵Linus Torvalds1-0/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem patches for 4.15-rc1. There are small changes all over here, hyperv driver updates, pcmcia driver updates, w1 driver updats, vme driver updates, nvmem driver updates, and lots of other little one-off driver updates as well. The shortlog has the full details. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) VME: Return -EBUSY when DMA list in use w1: keep balance of mutex locks and refcnts MAINTAINERS: Update VME subsystem tree. nvmem: sunxi-sid: add support for A64/H5's SID controller nvmem: imx-ocotp: Update module description nvmem: imx-ocotp: Enable i.MX7D OTP write support nvmem: imx-ocotp: Add i.MX7D timing write clock setup support nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function nvmem: imx-ocotp: Add support for banked OTP addressing nvmem: imx-ocotp: Pass parameters via a struct nvmem: imx-ocotp: Restrict OTP write to IMX6 processors nvmem: uniphier: add UniPhier eFuse driver dt-bindings: nvmem: add description for UniPhier eFuse nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset nvmem: qfprom: fix different address space warnings of sparse nvmem: mtk-efuse: fix different address space warnings of sparse nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it thunderbolt: tb: fix use after free in tb_activate_pcie_devices MAINTAINERS: Add git tree for Thunderbolt development ...
2017-11-06thunderbolt: tb: fix use after free in tb_activate_pcie_devicesGustavo A. R. Silva1-0/+1
Add a ̣̣continue statement in order to avoid using a previously free'd pointer tunnel in list_add. Addresses-Coverity-ID: 1415336 Fixes: 9d3cce0b6136 ("thunderbolt: Introduce thunderbolt bus and connection manager") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller13-0/+13
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman13-0/+13
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27thunderbolt: Drop sequence number check from tb_xdomain_match()Mika Westerberg1-9/+0
Commit 9a03c3d398c1 ("thunderbolt: Fix a couple right shifting to zero bugs") revealed an issue that was previously hidden because we never actually compared received XDomain message sequence numbers properly. The idea with these sequence numbers is that the responding host uses the same sequence number that was in the request packet which we can then check at the requesting host. However, testing against macOS it looks like it does not follow this but instead uses some other logic. Windows driver on the other hand handles it the same way than Linux. In order to be able to talk to macOS again, fix this so that we drop the whole sequence number check. This effectively works exactly the same than it worked before the aforementioned commit. This also follows the logic the original P2P networking code used. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19thunderbolt: Fix a couple right shifting to zero bugsDan Carpenter1-2/+2
The problematic code looks like this: res_seq = res_hdr->xd_hdr.length_sn & TB_XDOMAIN_SN_MASK; res_seq >>= TB_XDOMAIN_SN_SHIFT; TB_XDOMAIN_SN_SHIFT is 27, and right shifting a u8 27 bits is always going to result in zero. The fix is to declare these variables as u32. Fixes: d1ff70241a27 ("thunderbolt: Add support for XDomain discovery protocol") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09thunderbolt: Initialize Thunderbolt bus earlierMika Westerberg2-1/+4
The 0day kbuild robot reports following crash: BUG: unable to handle kernel NULL pointer dereference at 00000004 IP: tb_property_find+0xe/0x41 *pde = 00000000 Oops: 0000 [#1] CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.0-rc1-00741-ge69b6c0 #412 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 task: 89c80000 task.stack: 89c7c000 EIP: tb_property_find+0xe/0x41 EFLAGS: 00210246 CPU: 0 EAX: 00000000 EBX: 7a368f47 ECX: 00000044 EDX: 7a368f47 ESI: 8851d340 EDI: 7a368f47 EBP: 89c7df0c ESP: 89c7defc DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 CR0: 80050033 CR2: 00000004 CR3: 027a2000 CR4: 00000690 Call Trace: tb_register_property_dir+0x49/0xb9 ? cdc_mbim_driver_init+0x1b/0x1b tbnet_init+0x77/0x9f ? cdc_mbim_driver_init+0x1b/0x1b do_one_initcall+0x7e/0x145 ? parse_args+0x10c/0x1b3 ? kernel_init_freeable+0xbe/0x159 kernel_init_freeable+0xd1/0x159 ? rest_init+0x110/0x110 kernel_init+0xd/0xd0 ret_from_fork+0x19/0x30 The reason is that both Thunderbolt bus and thunderbolt-net are build into the kernel image, and the latter is linked first because drivers/net comes before drivers/thunderbolt. Since both use module_init() thunderbolt-net ends up calling Thunderbolt bus functions too early triggering the above crash. Fix this by moving Thunderbolt bus initialization to happen earlier to make sure all the data structures are ready when Thunderbolt service drivers are initialized. To be on the safe side also add a check for properly initialized xdomain_property_dir to tb_register_property_dir(). Reported-by: kernel test robot <fengguang.wu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Allocate ring HopID automatically if requestedMika Westerberg1-18/+60
Thunderbolt services should not care which HopID (ring) they use for sending and receiving packets over the high-speed DMA path, so make tb_ring_alloc_rx() and tb_ring_alloc_tx() accept negative HopID. This means that the NHI will allocate next available HopID for the caller automatically. These HopIDs will be allocated from the range which is not reserved for the Thunderbolt protocol (8 .. hop_count - 1). The allocated HopID can be retrieved from ring->hop field after the ring has been allocated successfully if needed. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add polling mode for ringsMika Westerberg2-10/+118
In order to support things like networking over Thunderbolt cable, there needs to be a way to switch the ring to a mode where it can be polled with the interrupt masked. We implement such mode so that the caller can allocate a ring by passing pointer to a function that is then called when an interrupt is triggered. Completed frames can be fetched using tb_ring_poll() and the interrupt can be re-enabled when the caller is finished with polling by using tb_ring_poll_complete(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Use spinlock in NHI serializationMika Westerberg1-34/+41
This is needed because ring polling functionality can be called from atomic contexts when networking and other high-speed traffic is transferred over a Thunderbolt cable. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Use spinlock in ring serializationMika Westerberg1-12/+14
This makes it possible to enqueue frames also from atomic context which is needed for example, when networking packets are sent over a Thunderbolt cable. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Move ring descriptor flags to thunderbolt.hMika Westerberg1-7/+0
A Thunderbolt service driver might need to check if there was an error with the descriptor when in frame mode. We also add two Rx specific error flags RING_DESC_CRC_ERROR and RING_DESC_BUFFER_OVERRUN. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Export ring handling functions to modulesMika Westerberg3-176/+53
These are used by Thunderbolt services to send and receive frames over the high-speed DMA rings. We also put the functions to tb_ namespace to make sure we do not collide with others and add missing kernel-doc comments for the exported functions. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add support for frame modeMika Westerberg4-30/+61
When high-speed DMA paths are used to transfer arbitrary data over a Thunderbolt link, DMA rings should be in frame mode instead of raw mode. The latter is used by the control channel (ring 0). In frame mode each data frame can hold up to 4kB payload. This patch modifies the DMA ring code to allow configuring a ring to be in frame mode by passing a new flag (RING_FLAG_FRAME) to the ring when it is allocated. In addition there might be need to enable end-to-end (E2E) workaround for the ring to prevent losing Rx frames in certain situations. We add another flag (RING_FLAG_E2E) that can be used for this purpose. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Configure interrupt throttling for all interruptsMika Westerberg2-3/+22
This will keep the interrupt delivery rate reasonable. The value used here (128 us) is a recommendation from the hardware people. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add support for XDomain discovery protocolMika Westerberg10-18/+2159
When two hosts are connected over a Thunderbolt cable, there is a protocol they can use to communicate capabilities supported by the host. The discovery protocol uses automatically configured control channel (ring 0) and is build on top of request/response transactions using special XDomain primitives provided by the Thunderbolt base protocol. The capabilities consists of a root directory block of basic properties used for identification of the host, and then there can be zero or more directories each describing a Thunderbolt service and its capabilities. Once both sides have discovered what is supported the two hosts can setup high-speed DMA paths and transfer data to the other side using whatever protocol was agreed based on the properties. The software protocol used to communicate which DMA paths to enable is service specific. This patch adds support for the XDomain discovery protocol to the Thunderbolt bus. We model each remote host connection as a Linux XDomain device. For each Thunderbolt service found supported on the XDomain device, we create Linux Thunderbolt service device which Thunderbolt service drivers can then bind to based on the protocol identification information retrieved from the property directory describing the service. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Move tb_switch_phy_port_from_link() to thunderbolt.hMika Westerberg2-8/+1
A Thunderbolt service might need to find the physical port from a link the cable is connected to. For instance networking driver uses this information to generate MAC address according the Apple ThunderboltIP protocol. Move this function to thunderbolt.h and rename it to tb_phy_port_from_link() to reflect the fact that it does not take switch as parameter. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Move thunderbolt domain structure to thunderbolt.hMika Westerberg1-42/+0
These are needed by Thunderbolt services so move them to thunderbolt.h to make sure they are available outside of drivers/thunderbolt. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Move enum tb_cfg_pkg_type to thunderbolt.hMika Westerberg2-17/+1
These will be needed by Thunderbolt services when sending and receiving XDomain control messages. While there change TB_CFG_PKG_PREPARE_TO_SLEEP value to be decimal in order to be consistent with other members. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add support for XDomain propertiesMika Westerberg2-1/+671
Thunderbolt XDomain discovery protocol uses directories which contain properties and other directories to exchange information about what capabilities the remote host supports. This also includes identification information like device ID and name. This adds support for parsing and formatting these properties and establishes an API drivers can use in addition to the core Thunderbolt driver. This API is exposed in a new header: include/linux/thunderbolt.h. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Remove __packed from ICM message structuresMika Westerberg1-14/+14
These messages are all 32-bit aligned and they should be packed without the __packed attribute just fine. It also allows compiler to generate better code on some architectures. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02byteorder: Move {cpu_to_be32, be32_to_cpu}_array() from Thunderbolt to coreMika Westerberg1-14/+0
We will be using these when communicating XDomain discovery protocol over Thunderbolt link but they might be useful for other drivers as well. Make them available through byteorder/generic.h. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-05Merge tag 'acpi-4.14-rc1' of ↵Linus Torvalds2-11/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These include a usual ACPICA code update (this time to upstream revision 20170728), a fix for a boot crash on some systems with Thunderbolt devices connected at boot time, a rework of the handling of PCI bridges when setting up device wakeup, new support for Apple device properties, support for DMA configurations reported via ACPI on ARM64, APEI-related updates, ACPI EC driver updates and assorted minor modifications in several places. Specifics: - Update the ACPICA code in the kernel to upstream revision 20170728 including: * Alias operator handling update (Bob Moore). * Deferred resolution of reference package elements (Bob Moore). * Support for the _DMA method in walk resources (Bob Moore). * Tables handling update and support for deferred table verification (Lv Zheng). * Update of SMMU models for IORT (Robin Murphy). * Compiler and disassembler updates (Alex James, Erik Schmauss, Ganapatrao Kulkarni, James Morse). * Tools updates (Erik Schmauss, Lv Zheng). * Assorted minor fixes and cleanups (Bob Moore, Kees Cook, Lv Zheng, Shao Ming). - Rework the initialization of non-wakeup GPEs with method handlers in order to address a boot crash on some systems with Thunderbolt devices connected at boot time where we miss an early hotplug event due to a delay in GPE enabling (Rafael Wysocki). - Rework the handling of PCI bridges when setting up ACPI-based device wakeup in order to avoid disabling wakeup for bridges prematurely (Rafael Wysocki). - Consolidate Apple DMI checks throughout the tree, add support for Apple device properties to the device properties framework and use these properties for the handling of I2C and SPI devices on Apple systems (Lukas Wunner). - Add support for _DMA to the ACPI-based device properties lookup code and make it possible to use the information from there to configure DMA regions on ARM64 systems (Lorenzo Pieralisi). - Fix several issues in the APEI code, add support for exporting the BERT error region over sysfs and update APEI MAINTAINERS entry with reviewers information (Borislav Petkov, Dongjiu Geng, Loc Ho, Punit Agrawal, Tony Luck, Yazen Ghannam). - Fix a potential initialization ordering issue in the ACPI EC driver and clean it up somewhat (Lv Zheng). - Update the ACPI SPCR driver to extend the existing XGENE 8250 workaround in it to a new platform (m400) and to work around an Xgene UART clock issue (Graeme Gregory). - Add a new utility function to the ACPI core to support using ACPI OEM ID / OEM Table ID / Revision for system identification in blacklisting or similar and switch over the existing code already using this information to this new interface (Toshi Kani). - Fix an xpower PMIC issue related to GPADC reads that always return 0 without extra pin manipulations (Hans de Goede). - Add statements to print debug messages in a couple of places in the ACPI core for easier diagnostics (Rafael Wysocki). - Clean up the ACPI processor driver slightly (Colin Ian King, Hanjun Guo). - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko). - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight driver (Alex Hung). - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal, Ronald Tschalär, Sumeet Pawnikar)" * tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits) ACPI / APEI: Suppress message if HEST not present intel_pstate: convert to use acpi_match_platform_list() ACPI / blacklist: add acpi_match_platform_list() ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources ACPI: make device_attribute const ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region ACPI: APEI: fix the wrong iteration of generic error status block ACPI / processor: make function acpi_processor_check_duplicates() static ACPI / EC: Clean up EC GPE mask flag ACPI: EC: Fix possible issues related to EC initialization order ACPI / PM: Add debug statements to acpi_pm_notify_handler() ACPI: Add debug statements to acpi_global_event_handler() ACPI / scan: Enable GPEs before scanning the namespace ACPICA: Make it possible to enable runtime GPEs earlier ACPICA: Dispatch active GPEs at init time ACPI: SPCR: work around clock issue on xgene UART ACPI: SPCR: extend XGENE 8250 workaround to m400 ACPI / LPSS: Don't abort ACPI scan on missing mem resource mailbox: pcc: Drop uninformative output during boot ACPI/IORT: Add IORT named component memory address limits ...
2017-09-03Merge branches 'acpi-x86', 'acpi-soc', 'acpi-pmic' and 'acpi-apple'Rafael J. Wysocki2-11/+6
* acpi-x86: ACPI / boot: Add number of legacy IRQs to debug output ACPI / boot: Correct address space of __acpi_map_table() ACPI / boot: Don't define unused variables * acpi-soc: ACPI / LPSS: Don't abort ACPI scan on missing mem resource * acpi-pmic: ACPI / PMIC: xpower: Do pinswitch magic when reading GPADC * acpi-apple: spi: Use Apple device properties in absence of ACPI resources ACPI / scan: Recognize Apple SPI and I2C slaves ACPI / property: Support Apple _DSM properties ACPI / property: Don't evaluate objects for devices w/o handle treewide: Consolidate Apple DMI checks
2017-08-28thunderbolt: Fix reset response_typeDan Carpenter1-1/+1
There is a mistake here where we accidentally use sizeof(TB_CFG_PKG_RESET) instead of just TB_CFG_PKG_RESET. The size of an int is 4 so it's the same as TB_CFG_PKG_NOTIFY_ACK. Fixes: d7f781bfdbf4 ("thunderbolt: Rework control channel to be more reliable") Reported-by: Colin King <colin.king@canonical.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable <stable@vger.kernel.org> # 4.13 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28thunderbolt: Allow clearing the keyBernat, Yehezkel1-4/+11
If secure authentication of a devices fails, either because the device already has another key uploaded, or there is some other error sending challenge to the device, and the user only wants to approve the device just once (without a new key being uploaded to the device) the current implementation does not allow this because the key cannot be cleared once set even if we allow it to be changed. Make this scenario possible and allow clearing the key by writing empty string to the key sysfs file. Signed-off-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28thunderbolt: Make key root-only accessibleBernat, Yehezkel1-1/+1
Non-root user may read the key back after root wrote it there. This removes read access to everyone but root. Signed-off-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28thunderbolt: Remove superfluous checkBernat, Yehezkel1-3/+0
The key size is tested by hex2bin() already (as '\0' isn't an hex digit) Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-13Merge tag 'char-misc-4.13-rc5' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are two patches for 4.13-rc5. One is a fix for a reported thunderbolt issue, and the other a fix for an MEI driver issue. Both have been in linux-next with no reported issues" * tag 'char-misc-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Do not enumerate more ports from DROM than the controller has mei: exclude device from suspend direct complete optimization