summaryrefslogtreecommitdiffstats
path: root/drivers/thunderbolt
AgeCommit message (Collapse)AuthorFilesLines
2015-09-20thunderbolt: Allow loading of module on recent Apple MacBooks with ↵Knuth Posern1-1/+1
thunderbolt 2 controller The pci device ids listed in the thunderbolt driver are to restrictive, which prevents the driver from being loaded on recent Apple MacBooks using a thunderbolt 2 controller. In particular this prevented any hot-plugging functionality for thunderbolt based ethernet dongles (i.e. Apples thunderbolt gigabit ethernet broadcom tg3 based dongle Model A1433 EMC 2590). Changing the subvendor and subdevice to PCI_ANY_ID the thunderbolt driver loads and binds to the pci device 07:00.0 System peripheral: Intel Corporation Device 156c which is the thunderbolt 2 controller on the MacBookPro12,1. Successfully tested on MacBookPro12,1. With the patch the thunderbolt module gets now loaded on boot. And it provides hot-plugging support both for a cold-plugged and a warm-plugged ethernet dongle. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Acked-by: Knuth Posern <knuth@posern.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-26thunderbolt: Clear hops before overwritingAndreas Noever1-1/+20
Zero hops in tb_path_activate before writing a new path. This fixes the following scenario: - Boot with a coldplugged device - Unplug device - Plug device back in - PCI hotplug fails The hotplug operation fails because our new path matches the (now defunct) path which was setup by the firmware for the coldplugged device. By writing zeros before writing our path configuration we can force thunderbolt to retrain the path. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-13thunderbolt: Use kcallocHimangi Saraogi1-6/+4
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-07thunderbolt: Correct the size argument to devm_kzallocHimangi Saraogi1-2/+2
nhi->rx_rings does not have type as struct tb_ring *, as it is a double pointer so the elements of the array should have pointer type, not structure type. The Coccinelle semantic patch that makes this change is as follows: // <smpl> @disable sizeof_type_expr@ type T; T **x; @@ x = <+...sizeof( - T + *x )...+> // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Cc: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-21thunderbolt: select CRC32 in KconfigAndreas Noever1-0/+1
We use __crc32c_le in ctl.c. So make sure that the dependency is there. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: Make tb_eeprom_get_drom_offset staticAndreas Noever1-1/+1
tb_eeprom_get_drom_offset is local to this file. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: Make enum tb_drom_entry_type unsignedAndreas Noever1-1/+2
Force enum tb_drom_entry_type to unsigned to fix the following error: drivers/thunderbolt/eeprom.c:202:39: error: dubious one-bit signed bitfield Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: Fix header declaration of tb_find_capAndreas Noever1-1/+1
tb_find_cap in cap.c takes an enum tb_cap and not an u32. Fix the declaration in tb.h. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: Add casts to prevent endianness warningsAndreas Noever1-2/+2
Thunderbolt packets are big endian. Cast pkg->buffer to __be32* when accessing the checksum. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: fix format string for size_tArnd Bergmann1-1/+1
The result of "sizeof(struct tb_drom_entry_port)" is a size_t, which is not necessarily the same as 'long', so we should use the appropriate %z format string instead of %l. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: add PCI dependencyArnd Bergmann1-1/+1
The thunderbolt drivers cannot be built if CONFIG_PCI is disabled, better add an explicit Kconfig dependency. The "default no" line is redundant and can be removed at the same time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: Staticize nhi_idsSachin Kamat1-1/+1
'nhi_ids' is local to this file. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: Use NULL instead of 0 in nhi.cSachin Kamat1-1/+1
'descriptors' is a pointer. Use NULL isntead of 0. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: Use NULL instead of 0 in ctl.cSachin Kamat1-2/+2
The function returns a pointer. Hence return NULL instead of 0. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: Use NULL instead of 0 in switch.cSachin Kamat1-3/+3
The function returns a pointer. Hence return NULL instead of 0. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: Fix build error in switch.cSachin Kamat1-0/+1
Fixes the below error: drivers/thunderbolt/switch.c:347:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration] drivers/thunderbolt/switch.c:381:2: error: implicit declaration of function ‘kcalloc’ [-Werror=implicit-function-declaration] Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20thunderbolt: Fix build error in eeprom.cSachin Kamat1-0/+1
Fixes the below error: drivers/thunderbolt/eeprom.c:407:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration] drivers/thunderbolt/eeprom.c:444:2: error: implicit declaration of function ‘kfree’ [-Werror=implicit-function-declaration] Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Fix nontrivial endpoint devices.Andreas Noever3-18/+31
Fix issues observed with the Startech docking station: Fix the type of the route parameter in tb_ctl_rx. It should be u64 and not u8 (which only worked for short routes). A thunderbolt cable contains two lanes. If both endpoints support it a connection will be established on both lanes. Previously we tried to scan below both "dual link ports". Use the information extracted from the drom to only scan behind ports with lane_nr == 0. Endpoints with more complex thunderbolt controllers have some of their ports disabled (for example the NHI port or one of the HDMI/DP ports). Accessing them results in an error so we now ignore ports which are marked as disabled in the drom. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Read port configuration from eeprom.Andreas Noever3-7/+270
All Thunderbolt switches (except the root switch) contain a drom which contains information about the device. Right now we only read the UID. Add code to read and parse this drom. For now we are only interested in which ports are disabled and which ports are "dual link ports" (a physical thunderbolt port/socket contains two such ports). Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add suspend/hibernate supportAndreas Noever4-0/+183
We use _noirq since we have to restore the pci tunnels before the pci core wakes the tunneled devices. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Read switch uid from EEPROMAndreas Noever4-1/+198
Add eeprom access code and read the uid during switch initialization. The UID will be used to check device identity after suspend. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add support for simple pci tunnelsAndreas Noever5-1/+399
A pci downstream and pci upstream port can be connected through a tunnel. To establish the tunnel we have to setup two unidirectional paths between the two ports. Right now we only support paths with two hops (i.e. no chaining) and at most one pci device per thunderbolt device. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add path setup code.Andreas Noever4-1/+312
A thunderbolt path is a unidirectional channel between two thunderbolt ports. Two such paths are needed to establish a pci tunnel. This patch introduces struct tb_path as well as a set of tb_path_* methods which are used to activate & deactivate paths. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Handle hotplug eventsAndreas Noever3-2/+89
We receive a plug event callback whenever a thunderbolt device is added or removed. This patch fills in the tb_handle_hotplug method and starts reacting to these events by adding/removing switches from the hierarchy. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Scan for downstream switchesAndreas Noever3-0/+157
Add utility methods tb_port_state and tb_wait_for_port. Add tb_scan_switch which recursively checks for downstream switches. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Enable plug eventsAndreas Noever2-0/+53
Thunderbolt switches have a plug events capability. This patch adds the tb_plug_events_active method and uses it to activate plug events during switch allocation. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add thunderbolt capability handlingAndreas Noever3-1/+119
Thunderbolt config areas contain capability lists similar to those found on pci devices. This patch introduces a tb_find_cap utility method to search for capabilities. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Initialize root switch and portsAndreas Noever4-1/+333
This patch adds the structures tb_switch and tb_port as well as code to initialize the root switch. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add tb_regs.hAndreas Noever2-0/+218
Every thunderbolt device consists (logically) of a switch with multiple ports. Every port contains up to four config regions (HOPS, PORT, SWITCH, COUNTERS) which are used to configure the device. The tb_regs.h file contains all known registers and capabilities from these config regions. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Setup control channelAndreas Noever4-3/+186
Add struct tb which will contain our view of the thunderbolt bus. For now it just contains a pointer to the control channel and a workqueue for hotplug events. Add thunderbolt_alloc_and_start() and thunderbolt_shutdown_and_free() which are responsible for setup and teardown of struct tb. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add control channel interfaceAndreas Noever3-1/+807
Thunderbolt devices are configured by reading/writing into their configuration space (similar to pci). This is done by sending packets through the NHI (native host interface) onto the control channel. This patch handles the low level packet based protocol and exposes higher level operations like tb_cfg_read/tb_cfg_write. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add initial cactus ridge NHI supportAndreas Noever5-0/+860
Thunderbolt hotplug is supposed to be handled by the firmware. But Apple decided to implement thunderbolt at the operating system level. The firmare only initializes thunderbolt devices that are present at boot time. This driver enables hotplug of thunderbolt of non-chained thunderbolt devices on Apple systems with a cactus ridge controller. This first patch adds the Kconfig file as well the parts of the driver which talk directly to the hardware (that is pci device setup, interrupt handling and RX/TX ring management). Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>