summaryrefslogtreecommitdiffstats
path: root/drivers/thunderbolt/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2017-10-02thunderbolt: Add support for XDomain discovery protocolMika Westerberg1-1/+1
When two hosts are connected over a Thunderbolt cable, there is a protocol they can use to communicate capabilities supported by the host. The discovery protocol uses automatically configured control channel (ring 0) and is build on top of request/response transactions using special XDomain primitives provided by the Thunderbolt base protocol. The capabilities consists of a root directory block of basic properties used for identification of the host, and then there can be zero or more directories each describing a Thunderbolt service and its capabilities. Once both sides have discovered what is supported the two hosts can setup high-speed DMA paths and transfer data to the other side using whatever protocol was agreed based on the properties. The software protocol used to communicate which DMA paths to enable is service specific. This patch adds support for the XDomain discovery protocol to the Thunderbolt bus. We model each remote host connection as a Linux XDomain device. For each Thunderbolt service found supported on the XDomain device, we create Linux Thunderbolt service device which Thunderbolt service drivers can then bind to based on the protocol identification information retrieved from the property directory describing the service. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add support for XDomain propertiesMika Westerberg1-1/+1
Thunderbolt XDomain discovery protocol uses directories which contain properties and other directories to exchange information about what capabilities the remote host supports. This also includes identification information like device ID and name. This adds support for parsing and formatting these properties and establishes an API drivers can use in addition to the core Thunderbolt driver. This API is exposed in a new header: include/linux/thunderbolt.h. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09thunderbolt: Add support for Internal Connection Manager (ICM)Mika Westerberg1-1/+1
Starting from Intel Falcon Ridge the internal connection manager running on the Thunderbolt host controller has been supporting 4 security levels. One reason for this is to prevent DMA attacks and only allow connecting devices the user trusts. The internal connection manager (ICM) is the preferred way of connecting Thunderbolt devices over software only implementation typically used on Macs. The driver communicates with ICM using special Thunderbolt ring 0 (control channel) messages. In order to handle these messages we add support for the ICM messages to the control channel. The security levels are as follows: none - No security, all tunnels are created automatically user - User needs to approve the device before tunnels are created secure - User need to approve the device before tunnels are created. The device is sent a challenge on future connects to be able to verify it is actually the approved device. dponly - Only Display Port and USB tunnels can be created and those are created automatically. The security levels are typically configurable from the system BIOS and by default it is set to "user" on many systems. In this patch each Thunderbolt device will have either one or two new sysfs attributes: authorized and key. The latter appears for devices that support secure connect. In order to identify the device the user can read identication information, including UUID and name of the device from sysfs and based on that make a decision to authorize the device. The device is authorized by simply writing 1 to the "authorized" sysfs attribute. This is following the USB bus device authorization mechanism. The secure connect requires an additional challenge step (writing 2 to the "authorized" attribute) in future connects when the key has already been stored to the NVM of the device. Non-ICM systems (before Alpine Ridge) continue to use the existing functionality and the security level is set to none. For systems with Alpine Ridge, even on Apple hardware, we will use ICM. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Add support for DMA configuration based mailboxMika Westerberg1-1/+1
The DMA (NHI) port of a switch provides access to the NVM of the host controller (and devices starting from Intel Alpine Ridge). The NVM contains also more complete DROM for the root switch including vendor and device identification strings. This will look for the DMA port capability for each switch and if found populates sw->dma_port. We then teach tb_drom_read() to read the DROM information from NVM if available for the root switch. The DMA port capability also supports upgrading the NVM for both host controller and devices which will be added in subsequent patches. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Introduce thunderbolt bus and connection managerMika Westerberg1-1/+1
Thunderbolt fabric consists of one or more switches. This fabric is called domain and it is controlled by an entity called connection manager. The connection manager can be either internal (driven by a firmware running on the host controller) or external (software driver). This driver currently implements support for the latter. In order to manage switches and their properties more easily we model this domain structure as a Linux bus. Each host controller adds a domain device to this bus, and these devices are named as domainN where N stands for index or id of the current domain. We then abstract connection manager specific operations into a new structure tb_cm_ops and convert the existing tb.c to fill those accordingly. This makes it easier to add support for the internal connection manager in subsequent patches. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Read switch uid from EEPROMAndreas Noever1-1/+1
Add eeprom access code and read the uid during switch initialization. The UID will be used to check device identity after suspend. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add support for simple pci tunnelsAndreas Noever1-1/+1
A pci downstream and pci upstream port can be connected through a tunnel. To establish the tunnel we have to setup two unidirectional paths between the two ports. Right now we only support paths with two hops (i.e. no chaining) and at most one pci device per thunderbolt device. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add path setup code.Andreas Noever1-1/+1
A thunderbolt path is a unidirectional channel between two thunderbolt ports. Two such paths are needed to establish a pci tunnel. This patch introduces struct tb_path as well as a set of tb_path_* methods which are used to activate & deactivate paths. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add thunderbolt capability handlingAndreas Noever1-1/+1
Thunderbolt config areas contain capability lists similar to those found on pci devices. This patch introduces a tb_find_cap utility method to search for capabilities. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Initialize root switch and portsAndreas Noever1-1/+1
This patch adds the structures tb_switch and tb_port as well as code to initialize the root switch. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Setup control channelAndreas Noever1-1/+1
Add struct tb which will contain our view of the thunderbolt bus. For now it just contains a pointer to the control channel and a workqueue for hotplug events. Add thunderbolt_alloc_and_start() and thunderbolt_shutdown_and_free() which are responsible for setup and teardown of struct tb. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add control channel interfaceAndreas Noever1-1/+1
Thunderbolt devices are configured by reading/writing into their configuration space (similar to pci). This is done by sending packets through the NHI (native host interface) onto the control channel. This patch handles the low level packet based protocol and exposes higher level operations like tb_cfg_read/tb_cfg_write. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19thunderbolt: Add initial cactus ridge NHI supportAndreas Noever1-0/+3
Thunderbolt hotplug is supposed to be handled by the firmware. But Apple decided to implement thunderbolt at the operating system level. The firmare only initializes thunderbolt devices that are present at boot time. This driver enables hotplug of thunderbolt of non-chained thunderbolt devices on Apple systems with a cactus ridge controller. This first patch adds the Kconfig file as well the parts of the driver which talk directly to the hardware (that is pci device setup, interrupt handling and RX/TX ring management). Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>