summaryrefslogtreecommitdiffstats
path: root/drivers/thermal
AgeCommit message (Collapse)AuthorFilesLines
2021-05-05Merge tag 'thermal-v5.13-rc1' of ↵Linus Torvalds27-371/+706
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Remove duplicate error message for the amlogic driver (Tang Bin) - Fix spellos in comments for the tegra and sun8i (Bhaskar Chowdhury) - Add the missing fifth node on the rcar_gen3 sensor (Niklas Söderlund) - Remove duplicate include in ti-bandgap (Zhang Yunkai) - Assign error code in the error path in the function thermal_of_populate_bind_params() (Jia-Ju Bai) - Fix spelling mistake in a comment 'disabed' -> 'disabled' (Colin Ian King) - Use the device name instead of auto-numbering for a better identification of the cooling device (Daniel Lezcano) - Improve a bit the division accuracy in the power allocator governor (Jeson Gao) - Enable the missing third sensor on msm8976 (Konrad Dybcio) - Add QCom tsens driver co-maintainer (Thara Gopinath) - Fix memory leak and use after free errors in the core code (Daniel Lezcano) - Add the MDM9607 compatible bindings (Konrad Dybcio) - Fix trivial spello in the copyright name for Hisilicon (Hao Fang) - Fix negative index array access when converting the frequency to power in the energy model (Brian-sy Yang) - Add support for Gen2 new PMIC support for Qcom SPMI (David Collins) - Update maintainer file for CPU cooling device section (Lukasz Luba) - Fix missing put_device on error in the Qcom tsens driver (Guangqing Zhu) - Add compatible DT binding for sm8350 (Robert Foss) - Add support for the MDM9607's tsens driver (Konrad Dybcio) - Remove duplicate error messages in thermal_mmio and the bcm2835 driver (Ruiqi Gong) - Add the Thermal Temperature Cooling driver (Zhang Rui) - Remove duplicate error messages in the Hisilicon sensor driver (Ye Bin) - Use the devm_platform_ioremap_resource_byname() function instead of a couple of corresponding calls (dingsenjie) - Sort the headers alphabetically in the ti-bandgap driver (Zhen Lei) - Add missing property in the DT thermal sensor binding (Rafał Miłecki) - Remove dead code in the ti-bandgap sensor driver (Lin Ruizhe) - Convert the BRCM DT bindings to the yaml schema (Rafał Miłecki) - Replace the thermal_notify_framework() call by a call to the thermal_zone_device_update() function. Remove the function as well as the corresponding documentation (Thara Gopinath) - Add support for the ipq8064-tsens sensor along with a set of cleanups and code preparation (Ansuel Smith) - Add a lockless __thermal_cdev_update() function to improve the locking scheme in the core code and governors (Lukasz Luba) - Fix multiple cooling device notification changes (Lukasz Luba) - Remove unneeded variable initialization (Colin Ian King) * tag 'thermal-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (55 commits) thermal/drivers/mtk_thermal: Remove redundant initializations of several variables thermal/core/power allocator: Use the lockless __thermal_cdev_update() function thermal/core/fair share: Use the lockless __thermal_cdev_update() function thermal/core/fair share: Lock the thermal zone while looping over instances thermal/core/power_allocator: Update once cooling devices when temp is low thermal/core/power_allocator: Maintain the device statistics from going stale thermal/core: Create a helper __thermal_cdev_update() without a lock dt-bindings: thermal: tsens: Document ipq8064 bindings thermal/drivers/tsens: Add support for ipq8064-tsens thermal/drivers/tsens: Drop unused define for msm8960 thermal/drivers/tsens: Replace custom 8960 apis with generic apis thermal/drivers/tsens: Fix bug in sensor enable for msm8960 thermal/drivers/tsens: Use init_common for msm8960 thermal/drivers/tsens: Add VER_0 tsens version thermal/drivers/tsens: Convert msm8960 to reg_field thermal/drivers/tsens: Don't hardcode sensor slope Documentation: driver-api: thermal: Remove thermal_notify_framework from documentation thermal/core: Remove thermal_notify_framework iwlwifi: mvm: tt: Replace thermal_notify_framework dt-bindings: thermal: brcm,ns-thermal: Convert to the json-schema ...
2021-04-22thermal/drivers/mtk_thermal: Remove redundant initializations of several ↵Colin Ian King1-6/+6
variables Several variables are being initialized with values that is never read and being updated later with a new value. The initializations are redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422120412.246291-1-colin.king@canonical.com
2021-04-22thermal/core/power allocator: Use the lockless __thermal_cdev_update() functionLukasz Luba1-2/+1
Use the new helper function and avoid unnecessery second lock/unlock, which was present in old approach with thermal_cdev_update(). Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422153624.6074-4-lukasz.luba@arm.com
2021-04-22thermal/core/fair share: Use the lockless __thermal_cdev_update() functionLukasz Luba1-4/+3
Use the new helper function and avoid unnecessery second lock/unlock, which was present in old approach with thermal_cdev_update(). Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422153624.6074-3-lukasz.luba@arm.com
2021-04-22thermal/core/fair share: Lock the thermal zone while looping over instancesLukasz Luba1-0/+4
The tz->lock must be hold during the looping over the instances in that thermal zone. This lock was missing in the governor code since the beginning, so it's hard to point into a particular commit. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422153624.6074-2-lukasz.luba@arm.com
2021-04-22thermal/core/power_allocator: Update once cooling devices when temp is lowLukasz Luba1-4/+7
The cooling device state change generates an event, also when there is no need, because temperature is low and device is not throttled. Avoid to unnecessary update the cooling device which means also not sending event. The cooling device state has not changed because the temperature is still below the first activation trip point value, so we can do this. Add a tracking mechanism to make sure it updates cooling devices only once - when the temperature dropps below first trip point. Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422114308.29684-4-lukasz.luba@arm.com
2021-04-22thermal/core/power_allocator: Maintain the device statistics from going staleLukasz Luba1-0/+10
When the temperature is below the first activation trip point the cooling devices are not checked, so they cannot maintain fresh statistics. It leads into the situation, when temperature crosses first trip point, the statistics are stale and show state for very long period. This has impact on IPA algorithm calculation and wrong decisions. Thus, check the cooling devices even when the temperature is low, to refresh these statistics. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422114308.29684-3-lukasz.luba@arm.com
2021-04-22thermal/core: Create a helper __thermal_cdev_update() without a lockLukasz Luba2-10/+18
There is a need to have a helper function which updates cooling device state from the governors code. With this change governor can use lock and unlock while calling helper function. This avoid unnecessary second time lock/unlock which was in previous solution present in governor implementation. This new helper function must be called with mutex 'cdev->lock' hold. The changed been discussed and part of code presented in thread: https://lore.kernel.org/linux-pm/20210419084536.25000-1-lukasz.luba@arm.com/ Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20210422114308.29684-2-lukasz.luba@arm.com
2021-04-22thermal/drivers/tsens: Add support for ipq8064-tsensAnsuel Smith1-0/+3
Add support for tsens present in ipq806x SoCs based on generic msm8960 tsens driver. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-9-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Drop unused define for msm8960Ansuel Smith1-23/+1
Drop unused define for msm8960 replaced by generic api and reg_field. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-8-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Replace custom 8960 apis with generic apisAnsuel Smith1-41/+15
Rework calibrate function to use common function. Derive the offset from a missing hardcoded slope table and the data from the nvmem calib efuses. Drop custom get_temp function and use generic api. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-7-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Fix bug in sensor enable for msm8960Ansuel Smith1-3/+20
Device based on tsens VER_0 contains a hardware bug that results in some problem with sensor enablement. Sensor id 6-11 can't be enabled selectively and all of them must be enabled in one step. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-6-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Use init_common for msm8960Ansuel Smith1-51/+1
Use init_common and drop custom init for msm8960. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-5-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Add VER_0 tsens versionAnsuel Smith3-30/+133
VER_0 is used to describe device based on tsens version before v0.1. These device are devices based on msm8960 for example apq8064 or ipq806x. Add support for VER_0 in tsens.c and set the right tsens feat in tsens-8960.c file. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-4-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Convert msm8960 to reg_fieldAnsuel Smith1-2/+71
Convert msm9860 driver to reg_field to use the init_common function. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-3-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Don't hardcode sensor slopeAnsuel Smith1-1/+2
Function compute_intercept_slope hardcode the sensor slope to SLOPE_DEFAULT. Change this and use the default value only if a slope is not defined. This is needed for tsens VER_0 that has a hardcoded slope table. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-2-ansuelsmth@gmail.com
2021-04-22thermal/core: Remove thermal_notify_frameworkThara Gopinath1-18/+0
thermal_notify_framework just updates for a single trip point where as thermal_zone_device_update does other bookkeeping like updating the temperature of the thermal zone and setting the next trip point. The only driver that was using thermal_notify_framework was updated in the previous patch to use thermal_zone_device_update instead. Since there are no users for thermal_notify_framework remove it. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210122023406.3500424-3-thara.gopinath@linaro.org
2021-04-21thermal/drivers/ti-soc-thermal/bandgap Remove unused variable 'val'Lin Ruizhe1-4/+0
The function ti_bandgap_restore_ctxt() restores the context at resume time. It checks if the sensor has a counter, reads the register but does nothing with the value. The block was probably omitted by the commit b87ea759a4cc. Remove the unused variable as well as the block using it as we can consider it as dead code. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: b87ea759a4cc ("staging: omap-thermal: fix context restore function") Signed-off-by: Lin Ruizhe <linruizhe@huawei.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210421084256.57591-1-linruizhe@huawei.com
2021-04-20thermal/drivers/ti-soc-thermal/ti-bandgap: Rearrange all the included header ↵Zhen Lei1-17/+17
files alphabetically For the sake of lisibility, reorder the header files alphabetically. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406091912.2583-2-thunder.leizhen@huawei.com
2021-04-20thermal/drivers/tegra: Use devm_platform_ioremap_resource_bynamedingsenjie1-10/+3
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by: dingsenjie <dingsenjie@yulong.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210414063943.96244-1-dingsenjie@163.com
2021-04-20thermal/drivers/hisi: Remove redundant dev_err call in hisi_thermal_probe()Ye Bin1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210409075224.2109503-1-yebin10@huawei.com
2021-04-20thermal/drivers/intel: Introduce tcc cooling driverZhang Rui3-0/+141
On Intel processors, the core frequency can be reduced below OS request, when the current temperature reaches the TCC (Thermal Control Circuit) activation temperature. The default TCC activation temperature is specified by MSR_IA32_TEMPERATURE_TARGET. However, it can be adjusted by specifying an offset in degrees C, using the TCC Offset bits in the same MSR register. This patch introduces a cooling devices driver that utilizes the TCC Offset feature. The bigger the current cooling state is, the lower the effective TCC activation temperature is, so that the processors can be throttled earlier before system critical overheats. Note that, on different platforms, the behavior might be different on how fast the setting takes effect, and how much the CPU frequency is reduced. This patch has been tested on a KabyLake mobile platform from me, and also on a CometLake platform from Doug. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210412125901.12549-1-rui.zhang@intel.com
2021-04-20thermal/drivers/bcm2835: Remove redundant dev_err call in ↵Ruiqi Gong1-1/+0
bcm2835_thermal_probe() There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ruiqi Gong <gongruiqi1@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210408100329.7585-1-gongruiqi1@huawei.com
2021-04-20thermal/drivers/thermal_mmio: Remove redundant dev_err call in ↵Ruiqi Gong1-4/+1
thermal_mmio_probe() There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ruiqi Gong <gongruiqi1@huawei.com> Acked-by: Talel Shenhar <talel@amazon.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210408100144.7494-1-gongruiqi1@huawei.com
2021-04-20thermal/drivers/qcom/tsens-v0_1: Add support for MDM9607Konrad Dybcio3-2/+101
MDM9607 TSENS IP is very similar to the one of MSM8916, with minor adjustments to various tuning values. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210319220802.198215-2-konrad.dybcio@somainline.org
2021-04-15thermal/drivers/tsens: Fix missing put_device errorGuangqing Zhu1-2/+4
Fixes coccicheck error: drivers/thermal/qcom/tsens.c:759:4-10: ERROR: missing put_device; call of_find_device_by_node on line 715, but without a corresponding object release within this function. Fixes: a7ff82976122 ("drivers: thermal: tsens: Merge tsens-common.c into tsens.c") Signed-off-by: Guangqing Zhu <zhuguangqing83@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210404125431.12208-1-zhuguangqing83@gmail.com
2021-04-15thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 1 PMIC ↵David Collins1-30/+61
peripherals Add support for TEMP_ALARM GEN2 PMIC peripherals with digital major revision 1. This revision utilizes a different temperature threshold mapping than earlier revisions. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/69c90a004b3f5b7ae282f5ec5ca2920a48f23e02.1596040416.git.gurus@codeaurora.org
2021-04-15thermal/drivers/cpufreq_cooling: Fix slab OOB issuebrian-sy yang1-1/+1
Slab OOB issue is scanned by KASAN in cpu_power_to_freq(). If power is limited below the power of OPP0 in EM table, it will cause slab out-of-bound issue with negative array index. Return the lowest frequency if limited power cannot found a suitable OPP in EM table to fix this issue. Backtrace: [<ffffffd02d2a37f0>] die+0x104/0x5ac [<ffffffd02d2a5630>] bug_handler+0x64/0xd0 [<ffffffd02d288ce4>] brk_handler+0x160/0x258 [<ffffffd02d281e5c>] do_debug_exception+0x248/0x3f0 [<ffffffd02d284488>] el1_dbg+0x14/0xbc [<ffffffd02d75d1d4>] __kasan_report+0x1dc/0x1e0 [<ffffffd02d75c2e0>] kasan_report+0x10/0x20 [<ffffffd02d75def8>] __asan_report_load8_noabort+0x18/0x28 [<ffffffd02e6fce5c>] cpufreq_power2state+0x180/0x43c [<ffffffd02e6ead80>] power_actor_set_power+0x114/0x1d4 [<ffffffd02e6fac24>] allocate_power+0xaec/0xde0 [<ffffffd02e6f9f80>] power_allocator_throttle+0x3ec/0x5a4 [<ffffffd02e6ea888>] handle_thermal_trip+0x160/0x294 [<ffffffd02e6edd08>] thermal_zone_device_check+0xe4/0x154 [<ffffffd02d351cb4>] process_one_work+0x5e4/0xe28 [<ffffffd02d352f44>] worker_thread+0xa4c/0xfac [<ffffffd02d360124>] kthread+0x33c/0x358 [<ffffffd02d289940>] ret_from_fork+0xc/0x18 Fixes: 371a3bc79c11b ("thermal/drivers/cpufreq_cooling: Fix wrong frequency converted from power") Signed-off-by: brian-sy yang <brian-sy.yang@mediatek.com> Signed-off-by: Michael Kao <michael.kao@mediatek.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Cc: stable@vger.kernel.org #v5.7 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201229050831.19493-1-michael.kao@mediatek.com
2021-04-15thermal/drivers/hisi: Use the correct HiSilicon copyrightHao Fang1-3/+3
s/Hisilicon/HiSilicon/g. It should use capital S, according to https://www.hisilicon.com/en/terms-of-use. Signed-off-by: Hao Fang <fanghao11@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1617086733-2705-1-git-send-email-fanghao11@huawei.com
2021-04-15thermal/drivers/cpuidle_cooling: Fix use after errorDaniel Lezcano1-3/+5
When the function successfully finishes it logs an information about the registration of the cooling device and use its name to build the message. Unfortunately it was freed right before: drivers/thermal/cpuidle_cooling.c:218 __cpuidle_cooling_register() warn: 'name' was already freed. Fix this by freeing after the message happened. Fixes: 6fd1b186d900 ("thermal/drivers/cpuidle_cooling: Use device name instead of auto-numbering") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20210319202522.891061-1-daniel.lezcano@linaro.org
2021-04-15thermal/drivers/devfreq_cooling: Fix wrong return on error pathDaniel Lezcano1-1/+1
The following error is reported by kbuild: smatch warnings: drivers/thermal/devfreq_cooling.c:433 of_devfreq_cooling_register_power() warn: passing zero to 'ERR_PTR' Fix the error code by the setting the 'err' variable instead of 'cdev'. Fixes: f8d354e821b2 ("thermal/drivers/devfreq_cooling: Use device name instead of auto-numbering") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210319202424.890968-1-daniel.lezcano@linaro.org
2021-04-15thermal/core: Fix memory leak in the error pathDaniel Lezcano1-0/+1
Fix the following error: smatch warnings: drivers/thermal/thermal_core.c:1020 __thermal_cooling_device_register() warn: possible memory leak of 'cdev' by freeing the cdev when exiting the function in the error path. Fixes: 584837618100 ("thermal/drivers/core: Use a char pointer for the cooling device name") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210319202257.890848-1-daniel.lezcano@linaro.org
2021-03-17thermal/drivers/qcom/tsens_v1: Enable sensor 3 on MSM8976Konrad Dybcio1-2/+2
The sensor *is* in fact used and does report temperature. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210225213119.116550-1-konrad.dybcio@somainline.org
2021-03-17thermal/core: Add NULL pointer check before using cooling device statsManaf Meethalavalappu Pallikunhi1-0/+3
There is a possible chance that some cooling device stats buffer allocation fails due to very high cooling device max state value. Later cooling device update sysfs can try to access stats data for the same cooling device. It will lead to NULL pointer dereference issue. Add a NULL pointer check before accessing thermal cooling device stats data. It fixes the following bug [ 26.812833] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 27.122960] Call trace: [ 27.122963] do_raw_spin_lock+0x18/0xe8 [ 27.122966] _raw_spin_lock+0x24/0x30 [ 27.128157] thermal_cooling_device_stats_update+0x24/0x98 [ 27.128162] cur_state_store+0x88/0xb8 [ 27.128166] dev_attr_store+0x40/0x58 [ 27.128169] sysfs_kf_write+0x50/0x68 [ 27.133358] kernfs_fop_write+0x12c/0x1c8 [ 27.133362] __vfs_write+0x54/0x160 [ 27.152297] vfs_write+0xcc/0x188 [ 27.157132] ksys_write+0x78/0x108 [ 27.162050] ksys_write+0xf8/0x108 [ 27.166968] __arm_smccc_hvc+0x158/0x4b0 [ 27.166973] __arm_smccc_hvc+0x9c/0x4b0 [ 27.186005] el0_svc+0x8/0xc Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1607367181-24589-1-git-send-email-manafm@codeaurora.org
2021-03-16thermal/core/power_allocator: Using round the division when re-divvying up powerjeson.gao1-3/+5
The division is used directly in re-divvying up power, the decimal part will be discarded, devices will get less than the extra_actor_power - 1. if using round the division to make the calculation more accurate. For example: actor0 received more than its max_power, it has the extra_power 759 actor1 received less than its max_power, it require extra_actor_power 395 actor2 received less than its max_power, it require extra_actor_power 365 actor1 and actor2 require the total capped_extra_power 760 using division in re-divvying up power actor1 would actually get the extra_actor_power 394 actor2 would actually get the extra_actor_power 364 if using round the division in re-divvying up power actor1 would actually get the extra_actor_power 394 actor2 would actually get the extra_actor_power 365 Signed-off-by: Jeson Gao <jeson.gao@unisoc.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1615796737-4688-1-git-send-email-gao.yunxiao6@gmail.com
2021-03-15thermal/drivers/cpufreq_cooling: Remove unused listDaniel Lezcano1-13/+0
There is a list with the purpose of grouping the cpufreq cooling device together as described in the comments but actually it is unused, the code evolved since 2012 and the list was no longer needed. Delete the remaining unused list related code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20210314111333.16551-5-daniel.lezcano@linaro.org
2021-03-15thermal/drivers/cpuidle_cooling: Use device name instead of auto-numberingDaniel Lezcano1-17/+16
Currently the naming of a cooling device is just a cooling technique followed by a number. When there are multiple cooling devices using the same technique, it is impossible to clearly identify the related device as this one is just a number. For instance: thermal-idle-0 thermal-idle-1 thermal-idle-2 thermal-idle-3 etc ... The 'thermal' prefix is redundant with the subsystem namespace. This patch removes the 'thermal prefix and changes the number by the device name. So the naming above becomes: idle-cpu0 idle-cpu1 idle-cpu2 idle-cpu3 etc ... Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20210314111333.16551-4-daniel.lezcano@linaro.org
2021-03-15thermal/drivers/devfreq_cooling: Use device name instead of auto-numberingDaniel Lezcano1-17/+8
Currently the naming of a cooling device is just a cooling technique followed by a number. When there are multiple cooling devices using the same technique, it is impossible to clearly identify the related device as this one is just a number. For instance: thermal-devfreq-0 thermal-devfreq-1 etc ... The 'thermal' prefix is redundant with the subsystem namespace. This patch removes the 'thermal' prefix and changes the number by the device name. So the naming above becomes: devfreq-5000000.gpu devfreq-1d84000.ufshc etc ... Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20210314111333.16551-3-daniel.lezcano@linaro.org
2021-03-15thermal/drivers/cpufreq_cooling: Use device name instead of auto-numberingDaniel Lezcano1-22/+12
Currently the naming of a cooling device is just a cooling technique followed by a number. When there are multiple cooling devices using the same technique, it is impossible to clearly identify the related device as this one is just a number. For instance: thermal-cpufreq-0 thermal-cpufreq-1 etc ... The 'thermal' prefix is redundant with the subsystem namespace. This patch removes the 'thermal' prefix and changes the number by the device name. So the naming above becomes: cpufreq-cpu0 cpufreq-cpu4 etc ... Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20210314111333.16551-2-daniel.lezcano@linaro.org
2021-03-15thermal/drivers/core: Use a char pointer for the cooling device nameDaniel Lezcano1-16/+22
We want to have any kind of name for the cooling devices as we do no longer want to rely on auto-numbering. Let's replace the cooling device's fixed array by a char pointer to be allocated dynamically when registering the cooling device, so we don't limit the length of the name. Rework the error path at the same time as we have to rollback the allocations in case of error. Tested with a dummy device having the name: "Llanfairpwllgwyngyllgogerychwyrndrobwllllantysiliogogogoch" A village on the island of Anglesey (Wales), known to have the longest name in Europe. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20210314111333.16551-1-daniel.lezcano@linaro.org
2021-03-10thermal: thermal_of: Fix error return code of thermal_of_populate_bind_params()Jia-Ju Bai1-2/+5
When kcalloc() returns NULL to __tcbp or of_count_phandle_with_args() returns zero or -ENOENT to count, no error return code of thermal_of_populate_bind_params() is assigned. To fix these bugs, ret is assigned with -ENOMEM and -ENOENT in these cases, respectively. Fixes: a92bab8919e3 ("of: thermal: Allow multiple devices to share cooling map") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210310122423.3266-1-baijiaju1990@gmail.com
2021-03-10thermal:ti-soc-thermal: Remove duplicate include in ti-bandgapZhang Yunkai1-1/+0
'of_device.h' included in 'ti-bandgap.c' is duplicated. It is also included in the 25th line. Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210306123415.219441-1-zhang.yunkai@zte.com.cn
2021-03-10thermal: rcar_gen3_thermal: Add support for up to five TSC nodesNiklas Söderlund1-1/+2
Add support for up to five TSC nodes. The new THCODE values are taken from the example in the datasheet. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210309162419.2621359-1-niklas.soderlund+renesas@ragnatech.se
2021-03-10thermal: Fix couple of spellos in the file sun8i_thermal.cBhaskar Chowdhury1-2/+2
s/calibartion/calibration/ s/undocummented/undocumented/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210305014348.17412-1-unixbhaskar@gmail.com
2021-03-10thermal: Fix a typo in the file soctherm.cBhaskar Chowdhury1-1/+1
s/calibaration/calibration/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210305015320.7614-1-unixbhaskar@gmail.com
2021-03-10thermal: amlogic: Omit superfluous error message in amlogic_thermal_probe()Tang Bin1-3/+1
The function devm_platform_ioremap_resource has already contains error message, so remove the redundant dev_err here. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210222061105.6008-1-tangbin@cmss.chinamobile.com
2021-02-22Merge tag 'thermal-v5.12-rc1' of ↵Linus Torvalds23-598/+752
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Use the newly introduced 'hot' and 'critical' ops for the acpi thermal driver (Daniel Lezcano) - Remove the notify ops as it is no longer used (Daniel Lezcano) - Remove the 'forced passive' option and the unused bind/unbind functions (Daniel Lezcano) - Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro (Daniel Lezcano) - Rework the delays to make them pre-computed instead of computing them again and again at each polling interval (Daniel Lezcano) - Remove the pointless 'thermal_zone_device_reset' function (Daniel Lezcano) - Use the critical and hot ops to prevent an unexpected system shutdown on int340x (Kai-Heng Feng) - Make the cooling device state private to the thermal subsystem (Daniel Lezcano) - Prevent to use not-power-aware actor devices with the power allocator governor (Lukasz Luba) - Remove 'zx' and 'tango' support along with the corresponding platforms (Arnd Bergman) - Fix several issues on the Omap thermal driver (Tony Lindgren) - Add support for adc-tm5 PMIC thermal monitor for Qcom platforms (Dmitry Baryshkov) - Fix an initialization loop in the adc-tm5 (Colin Ian King) - Fix a return error check in the cpufreq cooling device (Viresh Kumar) * tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits) thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error thermal: qcom: Fix comparison with uninitialized variable channels_available thermal: qcom: add support for adc-tm5 PMIC thermal monitor dt-bindings: thermal: qcom: add adc-thermal monitor bindings thermal: ti-soc-thermal: Use non-inverted define for omap4 thermal: ti-soc-thermal: Simplify polling with iopoll thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430 thermal: ti-soc-thermal: Skip pointless register access for dra7 thermal/drivers/zx: Remove zx driver thermal/drivers/tango: Remove tango driver thermal: power allocator: fail binding for non-power actor devices thermal/core: Make cooling device state change private thermal: intel: pch: Fix unexpected shutdown at critical temperature thermal: int340x: Fix unexpected shutdown at critical temperature thermal/core: Remove pointless thermal_zone_device_reset() function thermal/core: Remove ms based delay fields thermal/core: Use precomputed jiffies for the polling thermal/core: Precompute the delays from msecs to jiffies thermal/core: Remove unused macro THERMAL_TRIPS_NONE thermal/core: Remove THERMAL_TRIPS_NONE test ...
2021-02-21Merge tag 'sched-core-2021-02-17' of ↵Linus Torvalds1-14/+55
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "Core scheduler updates: - Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the preempt=none/voluntary/full boot options (default: full), to allow distros to build a PREEMPT kernel but fall back to close to PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling behavior via a boot time selection. There's also the /debug/sched_debug switch to do this runtime. This feature is implemented via runtime patching (a new variant of static calls). The scope of the runtime patching can be best reviewed by looking at the sched_dynamic_update() function in kernel/sched/core.c. ( Note that the dynamic none/voluntary mode isn't 100% identical, for example preempt-RCU is available in all cases, plus the preempt count is maintained in all models, which has runtime overhead even with the code patching. ) The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast majority of distributions, are supposed to be unaffected. - Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that was found via rcutorture triggering a hang. The bug is that rcu_idle_enter() may wake up a NOCB kthread, but this happens after the last generic need_resched() check. Some cpuidle drivers fix it by chance but many others don't. In true 2020 fashion the original bug fix has grown into a 5-patch scheduler/RCU fix series plus another 16 RCU patches to address the underlying issue of missed preemption events. These are the initial fixes that should fix current incarnations of the bug. - Clean up rbtree usage in the scheduler, by providing & using the following consistent set of rbtree APIs: partial-order; less() based: - rb_add(): add a new entry to the rbtree - rb_add_cached(): like rb_add(), but for a rb_root_cached total-order; cmp() based: - rb_find(): find an entry in an rbtree - rb_find_add(): find an entry, and add if not found - rb_find_first(): find the first (leftmost) matching entry - rb_next_match(): continue from rb_find_first() - rb_for_each(): iterate a sub-tree using the previous two - Improve the SMP/NUMA load-balancer: scan for an idle sibling in a single pass. This is a 4-commit series where each commit improves one aspect of the idle sibling scan logic. - Improve the cpufreq cooling driver by getting the effective CPU utilization metrics from the scheduler - Improve the fair scheduler's active load-balancing logic by reducing the number of active LB attempts & lengthen the load-balancing interval. This improves stress-ng mmapfork performance. - Fix CFS's estimated utilization (util_est) calculation bug that can result in too high utilization values Misc updates & fixes: - Fix the HRTICK reprogramming & optimization feature - Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code - Reduce dl_add_task_root_domain() overhead - Fix uprobes refcount bug - Process pending softirqs in flush_smp_call_function_from_idle() - Clean up task priority related defines, remove *USER_*PRIO and USER_PRIO() - Simplify the sched_init_numa() deduplication sort - Documentation updates - Fix EAS bug in update_misfit_status(), which degraded the quality of energy-balancing - Smaller cleanups" * tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) sched,x86: Allow !PREEMPT_DYNAMIC entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point entry: Explicitly flush pending rcuog wakeup before last rescheduling point rcu/nocb: Trigger self-IPI on late deferred wake up before user resume rcu/nocb: Perform deferred wake up before last idle's need_resched() check rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers sched/features: Distinguish between NORMAL and DEADLINE hrtick sched/features: Fix hrtick reprogramming sched/deadline: Reduce rq lock contention in dl_add_task_root_domain() uprobes: (Re)add missing get_uprobe() in __find_uprobe() smp: Process pending softirqs in flush_smp_call_function_from_idle() sched: Harden PREEMPT_DYNAMIC static_call: Allow module use without exposing static_call_key sched: Add /debug/sched_preempt preempt/dynamic: Support dynamic preempt with preempt= boot option preempt/dynamic: Provide irqentry_exit_cond_resched() static call preempt/dynamic: Provide preempt_schedule[_notrace]() static calls preempt/dynamic: Provide cond_resched() and might_resched() static calls preempt: Introduce CONFIG_PREEMPT_DYNAMIC static_call: Provide DEFINE_STATIC_CALL_RET0() ...
2021-02-17thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on errorViresh Kumar1-1/+1
freq_qos_update_request() returns 1 if the effective constraint value has changed, 0 if the effective constraint value has not changed, or a negative error code on failures. The frequency constraints for CPUs can be set by different parts of the kernel. If the maximum frequency constraint set by other parts of the kernel are set at a lower value than the one corresponding to cooling state 0, then we will never be able to cool down the system as freq_qos_update_request() will keep on returning 0 and we will skip updating cpufreq_state and thermal pressure. Fix that by doing the updates even in the case where freq_qos_update_request() returns 0, as we have effectively set the constraint to a new value even if the consolidated value of the actual constraint is unchanged because of external factors. Cc: v5.7+ <stable@vger.kernel.org> # v5.7+ Reported-by: Thara Gopinath <thara.gopinath@linaro.org> Fixes: f12e4f66ab6a ("thermal/cpu-cooling: Update thermal pressure in case of a maximum frequency capping") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Thara Gopinath<thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/b2b7e84944937390256669df5a48ce5abba0c1ef.1613540713.git.viresh.kumar@linaro.org
2021-02-16thermal: qcom: Fix comparison with uninitialized variable channels_availableColin Ian King1-7/+7
Currently the check of chip->channels[i].channel is against an the uninitialized variable channels_available. I believe the variable channels_available needs to be fetched first by the call to adc_tm5_read before the channels check. Fix the issue swapping the order of the channels check loop with the call to adc_tm5_read. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: ca66dca5eda6 ("thermal: qcom: add support for adc-tm5 PMIC thermal monitor") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210216151626.162996-1-colin.king@canonical.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-26 15:08:24 +0000