summaryrefslogtreecommitdiffstats
path: root/drivers/thermal
AgeCommit message (Collapse)AuthorFilesLines
2022-01-17thermal: int340x: Add Raptor Lake PCI device idSrinivas Pandruvada2-0/+2
Add Raptor Lake PCI ID for processor thermal device. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-17thermal: int340x: Support Raptor LakeSrinivas Pandruvada2-0/+2
Add Raptor Lake ACPI IDs for DPTF devices. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-10Merge tag 'thermal-5.17-rc1' of ↵Linus Torvalds11-132/+449
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These add a new driver for Renesas RZ/G2L TSU, update a few existing thermal control drivers and clean up the tmon utility. Specifics: - Add new TSU driver and DT bindings for the Renesas RZ/G2L platform (Biju Das). - Fix missing check when calling reset_control_deassert() in the rz2gl thermal driver (Biju Das). - In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), avoid intentionally writing across neighboring fields in the int340x thermal control driver (Kees Cook). - Fix RFIM mailbox write commands handling in the int340x thermal control driver (Sumeet Pawnikar). - Fix PM issue occurring in the iMX thermal control driver during suspend/resume by implementing PM runtime support in it (Oleksij Rempel). - Add 'const' annotation to thermal_cooling_ops in the Intel powerclamp driver (Rikard Falkeborn). - Fix missing ADC bit set in the iMX8MP thermal driver to enable the sensor (Paul Gerber). - Drop unused local variable definition from tmon (ran jianping)" * tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/drivers/int340x: Fix RFIM mailbox write commands thermal/drivers/rz2gl: Add error check for reset_control_deassert() thermal/drivers/imx8mm: Enable ADC when enabling monitor thermal/drivers: Add TSU driver for RZ/G2L dt-bindings: thermal: Document Renesas RZ/G2L TSU thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops thermal/drivers/imx: Implement runtime PM support thermal: tools: tmon: remove unneeded local variable thermal: int340x: Use struct_group() for memcpy() region
2022-01-10Merge branch 'thermal-int340x'Rafael J. Wysocki3-53/+73
Merge int340x thermal driver update fixing RFIM mailbox write commands handling for 5.17-rc1. * thermal-int340x: thermal/drivers/int340x: Fix RFIM mailbox write commands
2021-12-30thermal/drivers/int340x: Fix RFIM mailbox write commandsSumeet Pawnikar3-53/+73
The existing mail mechanism only supports writing of workload types. However, mailbox command for RFIM (cmd = 0x08) also requires write operation which is ignored. This results in failing to store RFI restriction. Fixint this requires enhancing mailbox writes for non workload commands too, so remove the check for MBOX_CMD_WORKLOAD_TYPE_WRITE in mailbox write to allow this other write commands to be supoorted. At the same time, however, we have to make sure that there is no impact on read commands, by avoiding to write anything into the mailbox data register. To properly implement that, add two separate functions for mbox read and write commands for the processor thermal workload command type. This helps to distinguish the read and write workload command types from each other while sending mbox commands. Fixes: 5d6fbc96bd36 ("thermal/drivers/int340x: processor_thermal: Export additional attributes") Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Cc: 5.14+ <stable@vger.kernel.org> # 5.14+ Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-30Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq updates for 5.17-rc1 from Viresh Kumar: "- Qcom cpufreq driver updates improve irq support (Ard Biesheuvel, Stephen Boyd, and Vladimir Zapolskiy). - Fixes double devm_remap for mediatek driver (Hector Yuan). - Introduces thermal pressure helpers (Lukasz Luba)." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: mediatek-hw: Fix double devm_remap in hotplug case cpufreq: qcom-hw: Use optional irq API cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts cpufreq: qcom-hw: Fix probable nested interrupt handling cpufreq: qcom-cpufreq-hw: Avoid stack buffer for IRQ name arch_topology: Remove unused topology_set_thermal_pressure() and related cpufreq: qcom-cpufreq-hw: Use new thermal pressure update function cpufreq: qcom-cpufreq-hw: Update offline CPUs per-cpu thermal pressure thermal: cpufreq_cooling: Use new thermal pressure update function arch_topology: Introduce thermal pressure update function
2021-12-27Merge tag 'thermal-v5.17-rc1' of ↵Rafael J. Wysocki6-55/+347
https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal control material for 5.17-rc1 from Daniel Lezcano: - Fix PM issue on the iMX driver when suspend/resume is happening by implementing PM runtime support (Oleksij Rempel) - Add 'const' annotation to the thermal_cooling_ops in the Intel powerclamp driver (Rikard Falkeborn) - Add TSU driver and bindings for the RZ/G2L platform (Biju Das) - Fix missing ADC bit set on iMX8MP to enable the sensor (Paul Gerber) - Fix missing check when calling reset_control_deassert() (Biju Das) * tag 'thermal-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/rz2gl: Add error check for reset_control_deassert() thermal/drivers/imx8mm: Enable ADC when enabling monitor thermal/drivers: Add TSU driver for RZ/G2L dt-bindings: thermal: Document Renesas RZ/G2L TSU thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops thermal/drivers/imx: Implement runtime PM support
2021-12-14Merge back int340x driver material for 5.17.Rafael J. Wysocki2-24/+29
2021-12-09thermal/drivers/rz2gl: Add error check for reset_control_deassert()Biju Das1-2/+4
If reset_control_deassert() fails, then we won't be able to access the device registers. Therefore check the return code of reset_control_deassert() and bail out in case of error. While at it replace the parameter "&pdev->dev" -> "dev" in devm_reset_control_get_exclusive(). Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20211208164010.4130-1-biju.das.jz@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-12-08thermal: int340x: Fix VCoRefLow MMIO bit offset for TGLSumeet Pawnikar1-1/+1
The VCoRefLow CPU FIVR register definition for Tiger Lake is incorrect. Current implementation reads it from MMIO offset 0x5A18 and bit offset [12:14], but the actual correct register definition is from bit offset [11:13]. Update to fix the bit offset. Fixes: 473be51142ad ("thermal: int340x: processor_thermal: Add RFIM driver") Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Cc: 5.14+ <stable@vger.kernel.org> # 5.14+ [ rjw: New subject, changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-02thermal/drivers/imx8mm: Enable ADC when enabling monitorPaul Gerber1-0/+3
The i.MX 8MP has a ADC_PD bit in the TMU_TER register that controls the operating mode of the ADC: * 0 means normal operating mode * 1 means power down mode When enabling/disabling the TMU, the ADC operating mode must be set accordingly. i.MX 8M Mini & Nano are lacking this bit. Signed-off-by: Paul Gerber <Paul.Gerber@tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Fixes: 2b8f1f0337c5 ("thermal: imx8mm: Add i.MX8MP support") Link: https://lore.kernel.org/r/20211122114225.196280-1-alexander.stein@ew.tq-group.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-11-30thermal/drivers: Add TSU driver for RZ/G2LBiju Das3-0/+250
The RZ/G2L SoC incorporates a thermal sensor unit (TSU) that measures the temperature inside the LSI. The thermal sensor in this unit measures temperatures in the range from −40 degree Celsius to 125 degree Celsius with an accuracy of ±3°C. The TSU repeats measurement at 20 microseconds intervals and automatically updates the results of measurement. The TSU has no interrupts as well as no external pins. This patch adds Thermal Sensor Unit(TSU) driver for RZ/G2L SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211130155757.17837-3-biju.das.jz@bp.renesas.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-11-30thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_opsRikard Falkeborn1-1/+1
The only usage of powerclamp_cooling_ops is to pass its address to thermal_cooling_device_register(), which takes a pointer to const struct thermal_cooling_device_ops. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20211128214641.30953-1-rikard.falkeborn@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-11-30thermal/drivers/imx: Implement runtime PM supportOleksij Rempel1-54/+91
Starting with commit d92ed2c9d3ff ("thermal: imx: Use driver's local data to decide whether to run a measurement") this driver stared using irq_enabled flag to make decision to power on/off the thermal core. This triggered a regression, where after reaching critical temperature, alarm IRQ handler set irq_enabled to false, disabled thermal core and was not able read temperature and disable cooling sequence. In case the cooling device is "CPU/GPU freq", the system will run with reduce performance until next reboot. To solve this issue, we need to move all parts implementing hand made runtime power management and let it handle actual runtime PM framework. Fixes: d92ed2c9d3ff ("thermal: imx: Use driver's local data to decide whether to run a measurement") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Petr Beneš <petr.benes@ysoft.com> Link: https://lore.kernel.org/r/20211117103426.81813-1-o.rempel@pengutronix.de Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-11-24thermal: int340x: Use struct_group() for memcpy() regionKees Cook2-24/+29
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), avoid intentionally writing across neighboring fields. Use struct_group() in struct art around members weight, and ac[0-9]_max, so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of weight. "pahole" shows no size nor member offset changes to struct art. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences). Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-23thermal: cpufreq_cooling: Use new thermal pressure update functionLukasz Luba1-5/+1
Thermal pressure provides a new API, which allows to use CPU frequency as an argument. That removes the need of local conversion to capacity. Use this new function and remove old conversion code. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-11-18Merge branch 'thermal-int340x'Rafael J. Wysocki1-2/+2
Merge int340x thermal driver Kconfig fix for 5.16-rc2. * thermal-int340x: thermal: int340x: Limit Kconfig to 64-bit
2021-11-16thermal: core: Reset previous low and high trip during thermal zone initManaf Meethalavalappu Pallikunhi1-0/+2
During the suspend is in process, thermal_zone_device_update bails out thermal zone re-evaluation for any sensor trip violation without setting next valid trip to that sensor. It assumes during resume it will re-evaluate same thermal zone and update trip. But when it is in suspend temperature goes down and on resume path while updating thermal zone if temperature is less than previously violated trip, thermal zone set trip function evaluates the same previous high and previous low trip as new high and low trip. Since there is no change in high/low trip, it bails out from thermal zone set trip API without setting any trip. It leads to a case where sensor high trip or low trip is disabled forever even though thermal zone has a valid high or low trip. During thermal zone device init, reset thermal zone previous high and low trip. It resolves above mentioned scenario. Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-16thermal: int340x: Limit Kconfig to 64-bitArnd Bergmann1-2/+2
32-bit processors cannot generally access 64-bit MMIO registers atomically, and it is unknown in which order the two halves of this registers would need to be read: drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c: In function 'send_mbox_cmd': drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c:79:37: error: implicit declaration of function 'readq'; did you mean 'readl'? [-Werror=implicit-function-declaration] 79 | *cmd_resp = readq((void __iomem *) (proc_priv->mmio_base + MBOX_OFFSET_DATA)); | ^~~~~ | readl The driver already does not build for anything other than x86, so limit it further to x86-64. Fixes: aeb58c860dc5 ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-12thermal: int340x: fix build on 32-bit targetsLinus Torvalds1-0/+1
Commit aeb58c860dc5 ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses") started using 'readq()' to read 64-bit status responses from the int340x hardware. That's all fine and good, but on 32-bit targets a 64-bit 'readq()' is ambiguous, since it's no longer an atomic access. Some hardware might require 64-bit accesses, and other hardware might want low word first or high word first. It's quite likely that the driver isn't relevant in a 32-bit environment any more, and there's a patch floating around to just make it depend on X86_64, but let's make it buildable on x86-32 anyway. The driver previously just read the low 32 bits, so the hardware certainly is ok with 32-bit reads, and in a little-endian environment the low word first model is the natural one. So just add the include for the 'io-64-nonatomic-lo-hi.h' version. Fixes: aeb58c860dc5 ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses") Reported-by: Jakub Kicinski <kuba@kernel.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-10Merge branch 'thermal-int340x'Rafael J. Wysocki3-15/+19
Merge int340x thermal driver fix for 5.16-rc1. * thermal-int340x: thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses
2021-11-05thermal: Replace pr_warn() with pr_warn_once() in user_space_bind()Rafael J. Wysocki1-2/+2
Use pr_warn_once() instead of pr_warn() to print the user space governor deprecation message in user_space_bind() to reduce the kernel log noise. Fixes: 0275c9fb0eff ("thermal/core: Make the userspace governor deprecated") Reported-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-11-05thermal: Fix NULL pointer dereferences in of_thermal_ functionsSubbaraman Narayanamurthy1-3/+6
of_parse_thermal_zones() parses the thermal-zones node and registers a thermal_zone device for each subnode. However, if a thermal zone is consuming a thermal sensor and that thermal sensor device hasn't probed yet, an attempt to set trip_point_*_temp for that thermal zone device can cause a NULL pointer dereference. Fix it. console:/sys/class/thermal/thermal_zone87 # echo 120000 > trip_point_0_temp ... Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... Call trace: of_thermal_set_trip_temp+0x40/0xc4 trip_point_temp_store+0xc0/0x1dc dev_attr_store+0x38/0x88 sysfs_kf_write+0x64/0xc0 kernfs_fop_write_iter+0x108/0x1d0 vfs_write+0x2f4/0x368 ksys_write+0x7c/0xec __arm64_sys_write+0x20/0x30 el0_svc_common.llvm.7279915941325364641+0xbc/0x1bc do_el0_svc+0x28/0xa0 el0_svc+0x14/0x24 el0_sync_handler+0x88/0xec el0_sync+0x1c0/0x200 While at it, fix the possible NULL pointer dereference in other functions as well: of_thermal_get_temp(), of_thermal_set_emul_temp(), of_thermal_get_trend(). Suggested-by: David Collins <quic_collinsd@quicinc.com> Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-04thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responsesSrinivas Pandruvada3-15/+19
Some of the RFIM mail box command returns 64 bit values. So enhance mailbox interface to return 64 bit values and use them for RFIM commands. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Fixes: 5d6fbc96bd36 ("thermal/drivers/int340x: processor_thermal: Export additional attributes") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-26Merge branches 'thermal-int340x', 'thermal-powerclamp' and 'thermal-docs'Rafael J. Wysocki2-10/+7
Merge Intel thermal driver updates and a thermal documentation update for v5.16. * thermal-int340x: thermal: int340x: delete bogus length check * thermal-powerclamp: thermal: intel_powerclamp: Use bitmap_zalloc/bitmap_free when applicable * thermal-docs: thermal: Move ABI documentation to Documentation/ABI
2021-10-21thermal/core: Deprecate changing cooling device state from userspaceDaniel Lezcano1-0/+3
The cooling devices have their cooling device set_cur_state read-writable all the time in the sysfs directory, thus allowing the userspace to act on it. The thermal framework is wrongly used by userspace as a power capping framework by acting on the cooling device opaque state. This one then competes with the in-kernel governor decision. We have seen in out-of-tree kernels, a big number of devices which are abusely declaring themselves as cooling device just to act on their power. The role of the thermal framework is to protect the junction temperature of the silicon. Letting the userspace to play with a cooling device is invalid and potentially dangerous. The powercap framework is the right framework to do power capping and moreover it deals with the aggregation via the dev pm qos. As the userspace governor is marked deprecated and about to be removed, there is no point to keep this file writable also in the future. Emit a warning and deprecate the interface. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20211019163506.2831454-2-daniel.lezcano@linaro.org
2021-10-21thermal/core: Make the userspace governor deprecatedDaniel Lezcano1-0/+9
The userspace governor is sending temperature when polling is active and trip point crossed events. Nothing else. AFAICT, this governor is used with custom kernels making the userspace governor co-existing with another governor on the same thermal zone because there was no notification mechanism, implying a hack in the framework to support this configuration. The new netlink thermal notification is able to provide more information than the userspace governor and give the opportunity to the users of this governor to replace it by a dedicated notification framework. The userspace governor will be removed as its usage is no longer needed. Add a warning message to tell the userspace governor is deprecated. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20211019163506.2831454-1-daniel.lezcano@linaro.org
2021-10-21thermal/drivers/int340x: Improve the tcc offset saving for suspend/resumeAntoine Tenart5-11/+60
When the driver resumes, the tcc offset is set back to its previous value. But this only works if the value was user defined as otherwise the offset isn't saved. This asymmetric logic is harder to maintain and introduced some issues. Improve the logic by saving the tcc offset in a suspend op, so the right value is always restored after a resume. Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Srinivas Pandruvada <srinivas.pI andruvada@linux.intel.com> Link: https://lore.kernel.org/r/20210909085613.5577-3-atenart@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-18thermal/drivers/uniphier: Add compatible string for NX1 SoCKunihiko Hayashi1-0/+4
Add basic support for UniPhier NX1 SoC. This includes a compatible string and the same SoC-dependent data as LD20 SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1634520891-16801-3-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-17thermal/drivers/rockchip_thermal: Allow more resets for tsadc nodeJohan Jonker1-1/+1
The tsadc node in rk356x.dtsi has more resets then currently supported by the rockchip_thermal.c driver, so use devm_reset_control_array_get() to reset them all. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210930110517.14323-3-jbx6244@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-16thermal/drivers/tsens: Add timeout to get_temp_tsens_validAnsuel Smith1-15/+14
The function can loop and lock the system if for whatever reason the bit for the target sensor is NEVER valid. This is the case if a sensor is disabled by the factory and the valid bit is never reported as actually valid. Add a timeout check and exit if a timeout occurs. As this is a very rare condition, handle the timeout only if the first read fails. While at it also rework the function to improve readability and convert to poll_timeout generic macro. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007172859.583-1-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-16thermal/drivers/qcom/lmh: make QCOM_LMH depends on QCOM_SCMJackie Liu1-1/+1
Without QCOM_SCM, build failed, avoid like below: aarch64-linux-gnu-ld: Unexpected GOT/PLT entries detected! aarch64-linux-gnu-ld: Unexpected run-time procedure linkages detected! aarch64-linux-gnu-ld: drivers/thermal/qcom/lmh.o: in function `lmh_probe': /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:141: undefined reference to `qcom_scm_lmh_dcvsh_available' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:144: undefined reference to `qcom_scm_lmh_dcvsh' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:149: undefined reference to `qcom_scm_lmh_dcvsh' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:154: undefined reference to `qcom_scm_lmh_dcvsh' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:159: undefined reference to `qcom_scm_lmh_dcvsh' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:166: undefined reference to `qcom_scm_lmh_profile_change' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:173: undefined reference to `qcom_scm_lmh_dcvsh' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:180: undefined reference to `qcom_scm_lmh_dcvsh' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:187: undefined reference to `qcom_scm_lmh_dcvsh' make[1]: *** [/data/arm/workspace/kernel-build/linux/Makefile:1183: vmlinux] Error 1 make[1]: Leaving directory '/data/arm/workspace/kernel-build/linux/build' make: *** [Makefile:219: __sub-make] Error 2 make: Leaving directory '/data/arm/workspace/kernel-build/linux' Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Link: https://lore.kernel.org/r/20211009015853.3509559-1-liu.yun@linux.dev Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-15thermal/core: fix a UAF bug in __thermal_cooling_device_register()Ziyang Xuan1-2/+4
When device_register() return failed, program will goto out_kfree_type to release 'cdev->device' by put_device(). That will call thermal_release() to free 'cdev'. But the follow-up processes access 'cdev' continually. That trggers the UAF bug. ==================================================================== BUG: KASAN: use-after-free in __thermal_cooling_device_register+0x75b/0xa90 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: dump_stack_lvl+0xe2/0x152 print_address_description.constprop.0+0x21/0x140 ? __thermal_cooling_device_register+0x75b/0xa90 kasan_report.cold+0x7f/0x11b ? __thermal_cooling_device_register+0x75b/0xa90 __thermal_cooling_device_register+0x75b/0xa90 ? memset+0x20/0x40 ? __sanitizer_cov_trace_pc+0x1d/0x50 ? __devres_alloc_node+0x130/0x180 devm_thermal_of_cooling_device_register+0x67/0xf0 max6650_probe.cold+0x557/0x6aa ...... Freed by task 258: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x109/0x140 kfree+0x117/0x4c0 thermal_release+0xa0/0x110 device_release+0xa7/0x240 kobject_put+0x1ce/0x540 put_device+0x20/0x30 __thermal_cooling_device_register+0x731/0xa90 devm_thermal_of_cooling_device_register+0x67/0xf0 max6650_probe.cold+0x557/0x6aa [max6650] Do not use 'cdev' again after put_device() to fix the problem like doing in thermal_zone_device_register(). [dlezcano]: as requested by Rafael, change the affectation into two statements. Fixes: 584837618100 ("thermal/drivers/core: Use a char pointer for the cooling device name") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20211015024504.947520-1-william.xuanziyang@huawei.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-15thermal/core: Fix null pointer dereference in thermal_release()Yuanzheng Song1-2/+8
If both dev_set_name() and device_register() failed, then null pointer dereference occurs in thermal_release() which will use strncmp() to compare the name. So fix it by adding dev_set_name() return value check. Signed-off-by: Yuanzheng Song <songyuanzheng@huawei.com> Link: https://lore.kernel.org/r/20211015083230.67658-1-songyuanzheng@huawei.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-15thermal: rcar_gen3_thermal: Read calibration from hardwareNiklas Söderlund1-20/+74
In production hardware the calibration values used to convert register values to temperatures can be read from hardware. While pre-production hardware still depends on pseudo values hard-coded in the driver. Add support for reading out calibration values from hardware if it's fused. The presence of fused calibration is indicated in the THSCP register. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20211014103816.1939782-3-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-15thermal: rcar_gen3_thermal: Store thcode and ptat in priv dataNiklas Söderlund1-23/+28
Prepare for reading the THCODE and PTAT values from hardware fuses by storing the values used during calculations in the drivers private data structures. As the values are now stored directly in the private data structures there is no need to keep track of the TSC channel id as its only usage was to lookup the THCODE row, drop it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20211014103816.1939782-2-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-15thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variantBjorn Andersson1-1/+40
The variant of the ADC Thermal Monitor block found in e.g. PM8998 is "HC", add support for this variant to the ADC TM5 driver in order to support using VADC channels as thermal_zones on SDM845 et al. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211005032531.2251928-3-bjorn.andersson@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-07thermal/drivers/netlink: Add the temperature when crossing a trip pointDaniel Lezcano3-11/+14
The slope of the temperature increase or decrease can be high and when the temperature crosses the trip point, there could be a significant difference between the trip temperature and the measured temperatures. That forces the userspace to read the temperature back right after receiving a trip violation notification. In order to be efficient, give the temperature which resulted in the trip violation. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20211001223323.1836640-1-daniel.lezcano@linaro.org
2021-10-07thermal/drivers/thermal_mmio: Constify static struct thermal_mmio_opsRikard Falkeborn1-1/+1
The only usage of thermal_mmio_ops is to pass its address to devm_thermal_zone_of_sensor_register(), which has a pointer to const struct thermal_zone_of_device_ops as argument. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by: Talel Shenhar <talel@amazon.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210920203849.32136-1-rikard.falkeborn@gmail.com
2021-10-05thermal: int340x: delete bogus length checkDan Carpenter1-5/+4
This check has a signedness bug and does not work. If "length" is larger than "PAGE_SIZE" then "PAGE_SIZE - length" is not negative but instead it is a large unsigned value. Fortunately, Takashi Iwai changed this code to use scnprint() instead of snprintf() so now "length" is never larger than "PAGE_SIZE - 1" and the check can be removed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-10-05thermal: intel_powerclamp: Use bitmap_zalloc/bitmap_free when applicableChristophe JAILLET1-5/+3
'cpu_clamping_mask' is a bitmap. So use 'bitmap_zalloc()' and 'bitmap_free()' to simplify code, improve the semantic of the code and avoid some open-coded arithmetic in allocator arguments. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-09-21thermal/drivers/tsens: Fix wrong check for tzd in irq handlersAnsuel Smith1-2/+2
Some devices can have some thermal sensors disabled from the factory. The current two irq handler functions check all the sensor by default and the check if the sensor was actually registered is wrong. The tzd is actually never set if the registration fails hence the IS_ERR check is wrong. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210907212543.20220-1-ansuelsmth@gmail.com
2021-09-21thermal/core: Potential buffer overflow in thermal_build_list_of_policies()Dan Carpenter1-4/+3
After printing the list of thermal governors, then this function prints a newline character. The problem is that "size" has not been updated after printing the last governor. This means that it can write one character (the NUL terminator) beyond the end of the buffer. Get rid of the "size" variable and just use "PAGE_SIZE - count" directly. Fixes: 1b4f48494eb2 ("thermal: core: group functions related to governor handling") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210916131342.GB25094@kili
2021-09-14thermal/drivers/int340x: Do not set a wrong tcc offset on resumeAntoine Tenart1-2/+3
After upgrading to Linux 5.13.3 I noticed my laptop would shutdown due to overheat (when it should not). It turned out this was due to commit fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting"). What happens is this drivers uses a global variable to keep track of the tcc offset (tcc_offset_save) and uses it on resume. The issue is this variable is initialized to 0, but is only set in tcc_offset_degree_celsius_store, i.e. when the tcc offset is explicitly set by userspace. If that does not happen, the resume path will set the offset to 0 (in my case the h/w default being 3, the offset would become too low after a suspend/resume cycle). The issue did not arise before commit fe6a6de6692e, as the function setting the offset would return if the offset was 0. This is no longer the case (rightfully). Fix this by not applying the offset if it wasn't saved before, reverting back to the old logic. A better approach will come later, but this will be easier to apply to stable kernels. The logic to restore the offset after a resume was there long before commit fe6a6de6692e, but as a value of 0 was considered invalid I'm referencing the commit that made the issue possible in the Fixes tag instead. Fixes: fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting") Cc: stable@vger.kernel.org Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Srinivas Pandruvada <srinivas.pI andruvada@linux.intel.com> Link: https://lore.kernel.org/r/20210909085613.5577-2-atenart@kernel.org
2021-09-11Merge tag 'thermal-v5.15-rc1' of ↵Linus Torvalds13-13/+1054
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add the tegra3 thermal sensor and fix the compilation testing on tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST (Dmitry Osipenko) - Fix the error code for the exynos when devm_get_clk() fails (Dan Carpenter) - Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar) - Add support for hardware trip points for the rcar gen3 thermal driver and store TSC id as unsigned int (Niklas Söderlund) - Replace the deprecated CPU-hotplug functions get_online_cpus() and put_online_cpus (Sebastian Andrzej Siewior) - Add the thermal tools directory in the MAINTAINERS file (Daniel Lezcano) - Fix the Makefile and the cross compilation flags for the userspace 'tmon' tool (Rolf Eike Beer) - Allow to use the IMOK independently from the GDDV on Int340x (Sumeet Pawnikar) - Fix the stub thermal_cooling_device_register() function prototype which does not match the real function (Arnd Bergmann) - Make the thermal trip point optional in the DT bindings (Maxime Ripard) - Fix a typo in a comment in the core code (Geert Uytterhoeven) - Reduce the verbosity of the trace in the SoC thermal tegra driver (Dmitry Osipenko) - Add the support for the LMh (Limit Management hardware) driver on the QCom platforms (Thara Gopinath) - Allow processing of HWP interrupt by adding a weak function in the Intel driver (Srinivas Pandruvada) - Prevent an abort of the sensor probe is a channel is not used (Matthias Kaehlcke) * tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used thermal/drivers/intel: Allow processing of HWP interrupt dt-bindings: thermal: Add dt binding for QCOM LMh thermal/drivers/qcom: Add support for LMh driver firmware: qcom_scm: Introduce SCM calls to access LMh thermal/drivers/tegra-soctherm: Silence message about clamped temperature thermal: Spelling s/scallbacks/callbacks/ dt-bindings: thermal: Make trips node optional thermal/core: Fix thermal_cooling_device_register() prototype thermal/drivers/int340x: Use IMOK independently tools/thermal/tmon: Add cross compiling support thermal/tools/tmon: Improve the Makefile MAINTAINERS: Add missing userspace thermal tools to the thermal section thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions. thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points drivers/thermal/intel: Add TCC cooling support for AlderLake platform thermal/drivers/exynos: Fix an error code in exynos_tmu_probe() thermal/drivers/tegra: Correct compile-testing of drivers thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
2021-09-09thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not usedMatthias Kaehlcke1-0/+6
adc_tm5_register_tzd() registers the thermal zone sensors for all channels of the thermal monitor. If the registration of one channel fails the function skips the processing of the remaining channels and returns an error, which results in _probe() being aborted. One of the reasons the registration could fail is that none of the thermal zones is using the channel/sensor, which hardly is a critical error (if it is an error at all). If this case is detected emit a warning and continue with processing the remaining channels. Fixes: ca66dca5eda6 ("thermal: qcom: add support for adc-tm5 PMIC thermal monitor") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reported-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210823134726.1.I1dd23ddf77e5b3568625d80d6827653af071ce19@changeid
2021-09-09thermal/drivers/intel: Allow processing of HWP interruptSrinivas Pandruvada2-1/+9
Add a weak function to process HWP (Hardware P-states) notifications and move updating HWP_STATUS MSR to this function. This allows HWP interrupts to be processed by the intel_pstate driver in HWP mode by overriding the implementation. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210820024006.2347720-1-srinivas.pandruvada@linux.intel.com
2021-09-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge more updates from Andrew Morton: "147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f. Subsystems affected by this patch series: mm (memory-hotplug, rmap, ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan), alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib, checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig, selftests, ipc, and scripts" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits) scripts: check_extable: fix typo in user error message mm/workingset: correct kernel-doc notations ipc: replace costly bailout check in sysvipc_find_ipc() selftests/memfd: remove unused variable Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH configs: remove the obsolete CONFIG_INPUT_POLLDEV prctl: allow to setup brk for et_dyn executables pid: cleanup the stale comment mentioning pidmap_init(). kernel/fork.c: unexport get_{mm,task}_exe_file coredump: fix memleak in dump_vma_snapshot() fs/coredump.c: log if a core dump is aborted due to changed file permissions nilfs2: use refcount_dec_and_lock() to fix potential UAF nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group nilfs2: fix NULL pointer in nilfs_##name##_attr_release nilfs2: fix memory leak in nilfs_sysfs_create_device_group trap: cleanup trap_init() init: move usermodehelper_enable() to populate_rootfs() ...
2021-09-08thermal/drivers/devfreq_cooling: use HZ macrosDaniel Lezcano1-1/+1
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. The new macro uses a unsigned long type which is already the type in the current code via the 'freq' variable. Link: https://lkml.kernel.org/r/20210816114732.1834145-4-daniel.lezcano@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Christian Eggers <ceggers@arri.de> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-02Merge tag 'platform-drivers-x86-v5.15-1' of ↵Linus Torvalds3-0/+533
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "Highlights: - Move all the Intel drivers into their own subdir(s) (mostly Kate's work) - New meraki-mx100 platform driver - Asus WMI driver enhancements, including support for /sys/firmware/acpi/platform_profile - New BIOS SAR driver for Intel M.2 WWAM modems - Alder Lake support for the Intel PMC driver - A whole bunch of cleanups + fixes all over the place" * tag 'platform-drivers-x86-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits) platform/x86: dell-smbios-wmi: Add missing kfree in error-exit from run_smbios_call platform/x86: dell-smbios-wmi: Avoid false-positive memcpy() warning platform/x86: ISST: use semi-colons instead of commas platform/x86: asus-wmi: Fix "unsigned 'retval' is never less than zero" smatch warning platform/x86: asus-wmi: Delete impossible condition platform/x86: hp_accel: Convert to be a platform driver platform/x86: hp_accel: Remove _INI method call platform/mellanox: mlxbf-pmc: fix kernel-doc notation platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH platform/x86/intel: pmc/core: Add Alder Lake low power mode support for pmc core platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver platform/x86: intel-wmi-thunderbolt: Move to intel sub-directory platform/x86: intel-wmi-sbl-fw-update: Move to intel sub-directory platform/x86: intel-vbtn: Move to intel sub-directory platform/x86: intel_oaktrail: Move to intel sub-directory platform/x86: intel_int0002_vgpio: Move to intel sub-directory platform/x86: intel-hid: Move to intel sub-directory platform/x86: intel_atomisp2: Move to intel sub-directory platform/x86: intel_speed_select_if: Move to intel sub-directory ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-29 02:49:14 +0000