summaryrefslogtreecommitdiffstats
path: root/drivers/thermal
AgeCommit message (Collapse)AuthorFilesLines
2015-04-07drivers: thermal: st: remove several sparse warningsEduardo Valentin3-11/+11
Simple patch to make symbols static. Symbols that are not shared with other parts of the kernel can be made static. This change also removes several sparse complains. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ajit Pal Singh <ajitpal.singh@st.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-04-07thermal: constify of_device_id arrayFabian Frederick2-2/+2
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-04-07thermal: Do not log an error if thermal_zone_get_temp returns -EAGAINHans de Goede1-2/+4
Some temperature sensors only get updated every few seconds and while waiting for the first irq reporting a (new) temperature to happen there get_temp operand will return -EAGAIN as it does not have any data to report yet. Not logging an error in this case avoids messages like these from showing up in dmesg on affected systems: [ 1.219353] thermal thermal_zone0: failed to read out thermal zone 0 [ 2.015433] thermal thermal_zone0: failed to read out thermal zone 0 [ 2.416737] thermal thermal_zone0: failed to read out thermal zone 0 Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-03-05thermal: Make sysfs attributes of cooling devices default attributesMatthias Kaehlcke1-20/+17
Default attributes are created when the device is registered. Attributes created after device registration can lead to race conditions, where user space (e.g. udev) sees the device but not the attributes. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-03-05Thermal/int340x: Fix memleak for aux tripSrinivas Pandruvada1-4/+6
When thermal zone device register fails or on module exit, the memory for aux_trip is not freed. This change fixes this issue. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-03-02thermal: exynos: Fix wrong control of power down detection mode for Exynos7Chanwoo Choi1-1/+2
This patch fixes the wrong control of PD_DET_EN (power down detection mode) for Exynos7 because exynos7_tmu_control() always enables the power down detection mode regardless 'on' parameter. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2015-02-28thermal: int340x_thermal: Ignore missing _ART, _TRT tablesSrinivas Pandruvada1-6/+4
It is possible that _ART/_TRT tables are missing or have errors. Ignore those failures, as INT3400 thermal zone is still required for _OSC or mode switch. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-28thermal/intel_powerclamp: add id for Avoton SoCMiguel Bernal Marin1-0/+1
Enable Intel Powerclamp driver on Atom* Processor C2000 Product Family for Microservers (Avoton). Avoton - SoCs for micro-servers has package C-states which can be used for idle injection. Reported-by: Jose Navarro <jose.navarro@intel.com> Suggested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Tested-by: Jose Carlos Venegas Munoz <jos.c.venegas.munoz@intel.com> Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-24thermal: exynos: Clean-up code to use oneline entry for exynos compatible tableChanwoo Choi1-28/+10
This patch cleanup the code to use oneline for entry of exynos compatible table. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-24thermal: rcar: Make error and remove paths symmetrical with initGeert Uytterhoeven1-2/+2
Swap interrupt disable and thermal zone unregistration in the error and remove paths, to make them more symmetrical with the initialization path. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-24thermal: rcar: Fix race condition between init and interruptGeert Uytterhoeven1-13/+9
As soon as the interrupt has been enabled by devm_request_irq(), the interrupt routine may be called, depending on the current status of the hardware. However, at that point rcar_thermal_common hasn't been initialized complely yet. E.g. rcar_thermal_common.base is still NULL, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000c pgd = c0004000 [0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc7-ape6evm-04564-gb6e46cb7cbe82389 #30 Hardware name: Generic R8A73A4 (Flattened Device Tree) task: ee8953c0 ti: ee896000 task.ti: ee896000 PC is at rcar_thermal_irq+0x1c/0xf0 LR is at _raw_spin_lock_irqsave+0x48/0x54 Postpone the call to devm_request_irq() until all initialization has been done to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-24ti-soc-thermal: Delete an unnecessary check before the function call ↵Markus Elfring1-1/+1
"cpufreq_cooling_unregister" The cpufreq_cooling_unregister() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-24thermal: ti-soc-thermal: bandgap: Fix build warning if !CONFIG_PM_SLEEPGrygorii Strashko1-1/+1
Fix following build warning if CONFIG_PM_SLEEP is not set: drivers/thermal/ti-soc-thermal/ti-bandgap.c:1478:12: warning: 'ti_bandgap_suspend' defined but not used [-Wunused-function] static int ti_bandgap_suspend(struct device *dev) ^ drivers/thermal/ti-soc-thermal/ti-bandgap.c:1492:12: warning: 'ti_bandgap_resume' defined but not used [-Wunused-function] static int ti_bandgap_resume(struct device *dev) ^ Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-20thermal: exynos: fix: Check if data->tmu_read callback is present before readLukasz Majewski1-1/+1
The exynos_tmu_data() function should on entrance test not only for valid data pointer, but also for data->tmu_read one. It is important, since afterwards it is dereferenced to get temperature code. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-19Merge branch 'fixes' of ↵Linus Torvalds9-1030/+447
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull more thermal managament updates from Zhang Rui: "Specifics: - Exynos thermal driver refactoring. Several cleanups, code optimization, unused symbols removal, and unused feature removal in Exynos thermal driver. Thanks Lukasz for this effort. - Exynos thermal driver support to OF thermal. After the code refactoring, the driver earned the support to OF thermal. Chip thermal data were moved from driver code to DTS, reducing the code footprint. Thanks Lukasz for this. - After receiving the OF thermal support, the exynos thermal driver now must allow modular build. Thanks Arnd for detecting, reporting and fixing this. - Exynos thermal driver support to Exynos 7 SoC. Thanks Abhilash for this. - Accurate temperature reporting on Rockchip thermal driver, thanks to Caesar. - Fix on how OF thermal enables its zones, thanks Lukasz for fixing. - Fixes in OF thermal examples under Documentation/. Thanks Srinivas for fixing" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: exynos: Add TMU support for Exynos7 SoC dts: Documentation: Add documentation for Exynos7 SoC thermal bindings cpufreq: exynos: allow modular build thermal: Fix examples in DT documentation thermal: exynos: Correct sanity check at exynos_report_trigger() function thermal: Kconfig: Remove config for not used EXYNOS_THERMAL_CORE thermal: exynos: Remove exynos_tmu_data.c file thermal: rockchip: make temperature reporting much more accurate thermal: exynos: Remove exynos_thermal_common.[c|h] files thermal: samsung: core: Exynos TMU rework to use device tree for configuration dts: Documentation: Update exynos-thermal.txt example for Exynos5440 dts: Documentation: Extending documentation entry for exynos-thermal cpufreq: exynos: Use device tree to determine if cpufreq cooling should be registered thermal: exynos: Modify exynos thermal code to use device tree for cpu cooling configuration thermal: exynos: Provide thermal_exynos.h file to be included in device tree files thermal: exynos: cosmetic: Correct comment format thermal: of: Enable thermal_zoneX when sensor is correctly added
2015-02-19Merge branch 'next' of ↵Linus Torvalds9-392/+515
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal managament updates from Zhang Rui: "Specifics: - Abstract the code and introduce helper functions for all int340x thermal drivers. From: Srinivas Pandruvada. - Reorganize the ACPI LPAT table support code so that it can be shared for both ACPI PMIC driver and int340x thermal driver. - Add support for Braswell in intel_soc_dts thermal driver. - a couple of small fixes/cleanups for step_wise governor and int340x thermal driver" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Thermal/int340x_thermal: remove unused uuids. thermal: step_wise: spelling fixes thermal: int340x: fix sparse warning Thermal/int340x: LPAT conversion for temperature ACPI / PMIC: Use common LPAT table handling functions ACPI / LPAT: Common table processing functions thermal: Intel SoC DTS: Add Braswell support Thermal/int340x/int3402: Provide notification support Thermal/int340x/processor_thermal: Add thermal zone support Thermal/int340x/int3403: Use int340x thermal API Thermal/int340x/int3402: Use int340x thermal API Thermal/int340x: Add common thermal zone handler
2015-02-06Thermal/int340x_thermal: remove unused uuids.Zhang Rui1-4/+0
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-06thermal: step_wise: spelling fixesBrian Norris1-2/+2
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-06thermal: int340x: fix sparse warningLad, Prabhakar1-1/+1
this patch fixes following sparse warning: processor_thermal_device.c:188:6: warning: symbol 'proc_thermal_remove' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-01-31thermal: exynos: Add TMU support for Exynos7 SoCAbhilash Kesavan2-8/+198
Add registers, bit fields and compatible strings for Exynos7 TMU (Thermal Management Unit). Following are a few of the differences in the Exynos7 TMU from earlier SoCs: - 8 trigger levels - Different bit offsets and more registers for the rising and falling thresholds. - New power down detection bit in the TMU_CONTROL register which does not update the CURRENT_TEMP0 when tmu power down is detected. - Change in bit offset for the NEXT_DATA field of EMUL_CON register. EMUL_CON register address has also changed. - INTSTAT and INTCLEAR registers present in earlier SoCs have been combined into one INTPEND register. The register address for INTCLEAR and INTPEND is also different. - Since there are 8 rising/falling interrupts as against at most 4 in earlier SoCs the INTEN bit offsets are different. - Multiple probe support which is handled by a TMU_CONTROL1 register (No support for this in the current patch). This patch adds special clock support required only for Exynos7. It also updates the "code_to_temp" prototype as Exynos7 has 9 bit code-temp mapping. Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-30Merge branches 'intel-dts-soc-thermal' and 'int340x-enhancement' of .git ↵Zhang Rui6-369/+482
into next
2015-01-29Thermal/int340x: LPAT conversion for temperatureSrinivas Pandruvada2-3/+20
When LPAT table is present, we need to convert raw temperature to real temp using LPAT. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-01-29thermal: Intel SoC DTS: Add Braswell supportSrinivas Pandruvada1-16/+30
Added Intel Braswell CPU id for SOC DTS. Since this doesn't support APIC IRQ, the driver is modified to have capability to not register any modifiable trips. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-01-28thermal: exynos: Correct sanity check at exynos_report_trigger() functionLukasz Majewski1-2/+2
Up till now, by mistake, wrong variable was tested against being NULL. Since exynos_report_trigger() is always called with valid p pointer, it is only necessary to check if a valid thermal zone device is passed. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-9/+16
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27thermal: Kconfig: Remove config for not used EXYNOS_THERMAL_CORELukasz Majewski1-9/+0
After removing exynos_thermal_common.[c|h] files the CONFIG_EXYNOS_THERMA_CORE is not needed anymore. This patch removes this entry from Kconfig. Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-26thermal: exynos: Remove exynos_tmu_data.c fileLukasz Majewski1-228/+0
Data already present in the exynos_tmu_data.c file has been moved to the appropriate device tree files. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-24thermal: rockchip: make temperature reporting much more accurateCaesar Wang1-13/+23
In general, the kernel should report temperature readings exactly as reported by the hardware. The cpu / gpu thermal driver works in 5 degree increments,but we ought to do more accurate. The temperature will do linear interpolation between the entries in the table. Test= $md5sum /dev/zero & $while true; do grep "" /sys/class/thermal/thermal_zone[1-2]/temp; sleep .5; done e.g. We can get the result as follows: /sys/class/thermal/thermal_zone1/temp:39994 /sys/class/thermal/thermal_zone2/temp:39086 /sys/class/thermal/thermal_zone1/temp:39994 /sys/class/thermal/thermal_zone2/temp:39540 /sys/class/thermal/thermal_zone1/temp:39540 /sys/class/thermal/thermal_zone2/temp:39540 /sys/class/thermal/thermal_zone1/temp:39540 /sys/class/thermal/thermal_zone2/temp:39994 Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-24thermal: exynos: Remove exynos_thermal_common.[c|h] filesLukasz Majewski2-551/+0
After defining all necessary Exynos data in the device tree and heavy reusage of the of-thermal.c those files can be removed. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-24thermal: samsung: core: Exynos TMU rework to use device tree for configurationLukasz Majewski3-182/+220
This patch brings support for providing configuration via device tree. Previously this data has been hardcoded in the exynos_tmu_data.c file. Such approach was not scalable and very often required copying the whole data. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-24thermal: exynos: Modify exynos thermal code to use device tree for cpu ↵Lukasz Majewski4-103/+73
cooling configuration Up till now exynos_tmu_data.c was used for storing CPU cooling configuration data. Now the Exynos thermal core code uses device tree to get this data. For this purpose generic thermal code for configuring CPU cooling was used. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-24thermal: exynos: Provide thermal_exynos.h file to be included in device tree ↵Lukasz Majewski1-9/+3
files This patch is a preparatory patch to be able to read Exynos thermal configuration from the device tree. It turned out that DTC is not able to interpret enums properly and hence it is necessary to #define those values explicitly. For this reason the ./include/dt-bindings/thermal/thermal_exynos.h file has been introduced. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-24thermal: exynos: cosmetic: Correct comment formatLukasz Majewski1-1/+1
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-21thermal: of: Enable thermal_zoneX when sensor is correctly addedLukasz Majewski1-0/+3
Up till now the thermal_zone mode was by default "disabled". With this patch the default behavior was changed to "enable". One can read the mode at: /sys/class/thermal/thermal_zone0/mode Tested-by: Javi Merino <javi.merino@arm.com> Reported-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-20Thermal/int340x/int3402: Provide notification supportSrinivas Pandruvada1-0/+33
This driver supports programmable trips, but didn't register notification handler to receive threshold violation notification. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-01-20Thermal/int340x/processor_thermal: Add thermal zone supportSrinivas Pandruvada1-0/+90
Added thermal zones for processor thermal using APIs provided by int340x thermal zone module. Like other INT340x devices, processor thermal device can also contain trip points and way to get temperature. On some platform there is no ACPI _TMP method, in those platform using IA64 architecture MSRs to get temperature. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-01-20Thermal/int340x/int3403: Use int340x thermal APISrinivas Pandruvada1-198/+10
Using APIs from int340x thermal zone module to add and remove thermal zones. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-01-20Thermal/int340x/int3402: Use int340x thermal APISrinivas Pandruvada1-178/+11
Using APIs from int340x thermal zone module to add and remove thermal zones. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-01-20Thermal/int340x: Add common thermal zone handlerSrinivas Pandruvada3-0/+328
Most of the processing for each int340x driver to add a thermal zone is very similar and every driver has to duplicate code. Created a common module, which exports API to add and remove zones. In this way, we not only avoid duplicate code but also helps in bug fixes and enhancements. If for some driver default processing for thermal zone callback is not enough they can overide individual callback. The code for this driver is primarily copied from int3402_thermal.c. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg1-5/+1
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15Merge branch 'thermal-soc' of ↵Linus Torvalds4-9/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal fixes from Zhang Rui: "Specifics: - bogus type qualifier fix in OF thermal code. - Minor fixes on imx and rcar thermal drivers. - Update TI SoC thermal maintainer entry. - Updated documentation of OF cpufreq cooling register" * 'thermal-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: rcar: Spelling/grammar: s/drier use .../driver uses ...s/ thermal: rcar: change type of ctemp in rcar_thermal_update_temp() thermal: rcar: fix ENR register value Documentation: thermal: document of_cpufreq_cooling_register() Thermal: imx: add clk disable/enable for suspend/resume MAINTAINERS: update ti-soc-thermal status MAINTAINERS: Add linux-omap to list of reviewers for TI Thermal thermal: of: Remove bogus type qualifier for of_thermal_get_trip_points()
2015-01-12thermal: rcar: Spelling/grammar: s/drier use .../driver uses ...s/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-07thermal: rcar: change type of ctemp in rcar_thermal_update_temp()Yoshihiro Shimoda1-2/+2
Since the ctemp is used for rcar_thermal_write() in rcar_thermal_update_temp(), the type of 'ctemp' should be "u32" instead of "int". This patch also changes type of the helper variables 'old' and 'new'. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-07thermal: rcar: fix ENR register valueYoshihiro Shimoda1-3/+8
On R-Mobile APE6, since it has 3 thermal zones, ENR register has enable bits in bit 19-16, bit 11-8 and bit 3-0. However, on R-Car gen2, since it has 1 thermal zone, ENR register has enable bits in bit 3-0. (In other words, the write value should always be 0 for bit 31-4 of ENR register.) So, this patch fixes the ENR register value using I/O resource sets. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-06Thermal: imx: add clk disable/enable for suspend/resumeAnson Huang1-0/+2
Thermal sensor's clk is from pll3_usb_otg, per hardware design requirement, need to make sure pll3_usb_otg is disabled before STOP mode is entered, otherwise, all PFDs under it may enter incorrect state, this patch disables pll3_usb_otg before suspend and enables it after resume. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-06int340x_thermal/processor_thermal_device: return failure whenZhang Rui1-0/+2
there is no ACPI device object processor_thermal_device driver needs ACPI support to work. Thus, the driver probing should fail when there is no ACPI device object asscociated. This fixes a NULL pointer dereference when the driver is loaded with INT340X feature disabled in BIOS. Reported-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Chen Yu <yu.c.chen@intel.com>
2015-01-06ACPI/int340x_thermal: enumerate INT340X devices even if they're not in _ART/_TRTZhang Rui1-12/+4
For some INT340X thermal devices, even if they are not referred in _TRT/_ART table, they still can be used by userspace for thermal control. Thus change the code to enumerated all the INT340X devices, no matter if they're referred in _TRT/_ART or not. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2015-01-05thermal: of: Remove bogus type qualifier for of_thermal_get_trip_points()Geert Uytterhoeven2-3/+3
With gcc 4.1.2, 4.2, and 4.2.4 (4.4 and later are OK): drivers/thermal/thermal_core.h:110: warning: type qualifiers ignored on function return type Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: ce8be7785922de0e ("thermal: of: Extend of-thermal to export table of trip points") Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-12-24Merge branches 'thermal-core', 'thermal-soc' and 'thermal-int340x' of .git ↵Zhang Rui16-271/+491
into next
2014-12-24Thermal/int340x/int3403: Free acpi notification handlerSrinivas Pandruvada1-0/+2
Remove acpi notification handler when zone is removed. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>