summaryrefslogtreecommitdiffstats
path: root/drivers/thermal
AgeCommit message (Collapse)AuthorFilesLines
2016-03-18Thermal: Ignore invalid trip pointsZhang Rui1-1/+12
In some cases, platform thermal driver may report invalid trip points, thermal core should not take any action for these trip points. This fixed a regression that bogus trip point starts to screw up thermal control on some Lenovo laptops, after commit bb431ba26c5cd0a17c941ca6c3a195a3a6d5d461 Author: Zhang Rui <rui.zhang@intel.com> Date: Fri Oct 30 16:31:47 2015 +0800 Thermal: initialize thermal zone device correctly After thermal zone device registered, as we have not read any temperature before, thus tz->temperature should not be 0, which actually means 0C, and thermal trend is not available. In this case, we need specially handling for the first thermal_zone_device_update(). Both thermal core framework and step_wise governor is enhanced to handle this. And since the step_wise governor is the only one that uses trends, so it's the only thermal governor that needs to be updated. Tested-by: Manuel Krause <manuelkrause@netscape.net> Tested-by: szegad <szegadlo@poczta.onet.pl> Tested-by: prash <prash.n.rao@gmail.com> Tested-by: amish <ammdispose-arch@yahoo.com> Tested-by: Matthias <morpheusxyz123@yahoo.de> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> CC: <stable@vger.kernel.org> #3.18+ Link: https://bugzilla.redhat.com/show_bug.cgi?id=1317190 Link: https://bugzilla.kernel.org/show_bug.cgi?id=114551 Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-03-15Merge branches 'thermal-core', 'thermal-intel' and 'thermal-soc' into nextZhang Rui11-115/+893
2016-03-15Merge branch 'linus' of ↵Zhang Rui4-0/+716
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2016-03-15thermal: intel_pch_thermal: Enable Skylake PCH thermalSrinivas Pandruvada1-0/+6
Enabled temperature reporting device of Skylake Platform Controller hub. The register map is same as the wildcat point thermal currently implemented in this driver. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-03-09thermal: of-thermal: Add devm version of thermal_zone_of_sensor_registerLaxman Dewangan1-0/+81
Add resource managed version of thermal_zone_of_sensor_register() and thermal_zone_of_sensor_unregister(). This helps in reducing the code size in error path, remove of driver remove callbacks and making proper sequence for deallocations. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: exynos: Defer probe if vtmu is present but not registeredJavier Martinez Canillas1-0/+2
The driver doesn't check if the regulator_get_optional return value is -EPROBE_DEFER so it will wrongly assume that the regulator couldn't be found just because the regulator driver wasn't registered yet, i.e: exynos-tmu 10060000.tmu: Regulator node (vtmu) not found In this case the return value should be propagated to allow the driver probe function to be deferred until the regulator driver is registered. Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: exynos: Use devm_regulator_get_optional() for vtmuJavier Martinez Canillas1-1/+1
The Exynos TMU DT binding says that the vtmu-supply is optional but the driver uses devm_regulator_get() that creates a dummy regulator if it's not defined in the DT. For example the following message is in the log: 10060000.tmu supply vtmu not found, using dummy regulator Use the optional version of regulator_get() that doesn't create a dummy regulator and instead returns a -ENODEV errno code. Since it's expected that a regulator may not be defined and the driver will inform about it: exynos-tmu 10060000.tmu: Regulator node (vtmu) not found Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: exynos: Print a message about exceeded number of supported trip-pointsKrzysztof Kozlowski1-0/+15
When DeviveTree contains more trip-points than SoC can configure (usually more than four) and polling mode is not enabled, then the remaining trip-points will be silently ignored. No interrupts will be generated for them. This might be quite dangerous when one provides DTB with a non-configurable critical trip-point, like (assuming four supported thresholds in TMU): - alert @50 C (type: active), - alert @60 C (type: active), - alert @70 C (type: active), - alert @80 C (type: active), - critical @120 C (type: critical) <- no interrupts generated. This is a mistake in DTB so print a message in such case. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: mtk: allow compile testing on UMEduardo Valentin1-0/+1
Following the fix on thermal Kconfig, this patch adds dependency on HAS_IOMEM so driver properly compile test on UM arch. Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: tegra_soctherm: fix sign bit of temperatureWei Ni1-1/+1
The sign bit of temperature readback is bit 0, not bit 1. Change to BIT(0) to fix it. Signed-off-by: Wei Ni <wni@nvidia.com> Reviewed-by: Matt Longnecker <mlongnecker@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: Fix build error of missing devm_ioremap_resource on UMKrzysztof Kozlowski2-0/+9
The devres.o gets linked if HAS_IOMEM is present so on ARCH=um allyesconfig (COMPILE_TEST) failed on many files with: drivers/built-in.o: In function `kirkwood_thermal_probe': kirkwood_thermal.c:(.text+0x390a25): undefined reference to `devm_ioremap_resource' drivers/built-in.o: In function `exynos_tmu_probe': exynos_tmu.c:(.text+0x39246b): undefined reference to `devm_ioremap' The users of devm_ioremap_resource() which are compile-testable should depend on HAS_IOMEM. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: ti-soc-thermal: clean up the error handling a bitDan Carpenter1-6/+4
We don't need to initialize "ret". We can move the IS_ERR() checks into the if condition instead of doing an assignment first. Also there is a check for "ret" when we know it is zero so we can remove that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: rcar: Use ARCH_RENESASSimon Horman1-1/+1
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: rcar_thermal: don't open code of_device_get_match_data()Wolfram Sang1-2/+1
This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: db8500_cpufreq_cooling: Compile with COMPILE_TESTLuis de Bethencourt1-1/+1
This driver only has runtime but no build time dependencies, so it can be built for testing purposes if the Kconfig COMPILE_TEST option is enabled. This is useful to have more build coverage and make sure that drivers are not affected by changes that could cause build regressions. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-29thermal: rockchip: fix the tsadc sequence output on rk3228/rk3399Caesar Wang1-74/+102
As the TRM says, add the tsadc_q_sel to control the temperature-code sequence since the rk3228/rk3399 need set this bit (1024 - tsadc_q) as output. Fixes: commit b0d7033 "thermal: rockchip: Support the RK3399 SoCs in thermal driver" 7b02a5e "thermal: rockchip: Support the RK3228 SoCs in thermal driver" Reported-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-29thermal: rockchip: the rename compatibles for rockchip SoCsCaesar Wang1-22/+28
This patch renames to be more adapter compatibles since more and more SoCs are supported in thermal driver. Reported-by: Huang,Tao <huangtao@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-29thermal: rockchip: fix calculation error for code_to_tempElaine Zhang1-1/+1
the calculation use a global table, not their own table. so adapt the table to the correct one. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-29thermal: rockchip: fix a impossible condition caused by the warningCaesar Wang1-6/+5
As the Dan report the smatch check the thermal driver warning: drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt() warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) => (s32min-s32max > s32max)' Although The shut_temp read from DT is u32,the temperature is currently represented as int not long in the thermal driver. Let's change to make shut_temp instead of the thermal->tshut_temp for the condition. Fixes: commit 437df2172e8d ("thermal: rockchip: consistently use int for temperatures") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-18thermal: small style cleanup in mtk_thermalEduardo Valentin1-27/+29
Remove all checkpatch.pl --strict errors, checks, and warnings. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-18thermal: Add Mediatek thermal controller supportSascha Hauer3-0/+632
This adds support for the Mediatek thermal controller found on MT8173 and likely other SoCs. The controller is a bit special. It does not have its own ADC, instead it controls the on-SoC AUXADC via AHB bus accesses. For this reason we need the physical address of the AUXADC. Also it controls a mux using AHB bus accesses, so we need the APMIXEDSYS physical address aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-11thermal: cpu_cooling: fix out of bounds access in time_in_idleJavi Merino1-6/+8
In __cpufreq_cooling_register() we allocate the arrays for time_in_idle and time_in_idle_timestamp to be as big as the number of cpus in this cpufreq device. However, in get_load() we access this array using the cpu number as index, which can result in an out of bound access. Index time_in_idle{,_timestamp} using the index in the cpufreq_device's allowed_cpus mask, as we do for the load_cpu array in cpufreq_get_requested_power() Reported-by: Nicolas Boichat <drinkcat@chromium.org> Cc: Amit Daniel Kachhap <amit.kachhap@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-09thermal: allow u8500-thermal driver to be a moduleArnd Bergmann1-2/+2
When the thermal subsystem is a loadable module, the u8500 driver fails to build: drivers/thermal/built-in.o: In function `db8500_thermal_probe': db8500_thermal.c:(.text+0x96c): undefined reference to `thermal_zone_device_register' drivers/thermal/built-in.o: In function `db8500_thermal_work': db8500_thermal.c:(.text+0xab4): undefined reference to `thermal_zone_device_update' This changes the symbol to a tristate, so Kconfig can track the dependency correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-09thermal: allow spear-thermal driver to be a moduleArnd Bergmann1-1/+1
When the thermal subsystem is a loadable module, the spear driver fails to build: drivers/thermal/built-in.o: In function `spear_thermal_exit': spear_thermal.c:(.text+0xf8): undefined reference to `thermal_zone_device_unregister' drivers/thermal/built-in.o: In function `spear_thermal_probe': spear_thermal.c:(.text+0x230): undefined reference to `thermal_zone_device_register' This changes the symbol to a tristate, so Kconfig can track the dependency correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-09thermal: spear: use __maybe_unused for PM functionsArnd Bergmann1-4/+2
The spear thermal driver hides its suspend/resume function conditionally based on CONFIG_PM, but references them based on CONFIG_PM_SLEEP, so we get a warning if the former is set but the latter is not: thermal/spear_thermal.c:58:12: warning: 'spear_thermal_suspend' defined but not used [-Wunused-function] thermal/spear_thermal.c:75:12: warning: 'spear_thermal_resume' defined but not used [-Wunused-function] This removes the #ifdef and instead uses a __maybe_uninitialized annotation to avoid the warning and improve compile-time coverage. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-09thermal: rcar: enable to use thermal-zone on DTKuninori Morimoto1-5/+40
This patch enables to use thermal-zone on DT if it was calles as "renesas,rcar-thermal-gen2". Previous style (= non thermal-zone) is still supported by "renesas,rcar-thermal" to keep compatibility for "git bisect". Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-09thermal: of: use for_each_available_child_of_node for child iteratorLaxman Dewangan1-15/+3
Use for_each_available_child_of_node() for iterating over each available child instead of iterating over each child and then checking their status. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-24Merge branch 'next' of ↵Linus Torvalds7-39/+297
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "The top merge commit was re-generated yesterday because two topic branches were dropped from this pull request in the last minute due to some unaddressed comments. All the other material has been in linux-next for quite a while. Specifics: - Enhance thermal core to handle unexpected device cooling states after fresh boot and system resume. From Zhang Rui and Chen Yu. - Several fixes and cleanups on Rockchip and RCAR thermal drivers. From Caesar Wang and Kuninori Morimoto. - Add Broxton support for Intel processor thermal reporting device driver. From Amy Wiles" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: trip_point_temp_store() calls thermal_zone_device_update() thermal: rcar: rcar_thermal_get_temp() return error if strange temp thermal: rcar: check irq possibility in rcar_thermal_irq_xxx() thermal: rcar: check every rcar_thermal_update_temp() return value thermal: rcar: move rcar_thermal_dt_ids to upside thermal: rockchip: Support the RK3399 SoCs in thermal driver thermal: rockchip: Support the RK3228 SoCs in thermal driver dt-bindings: rockchip-thermal: Support the RK3228/RK3399 SoCs compatible thermal: rockchip: fix a trivial typo Thermal: Enable Broxton SoC thermal reporting device thermal: constify pch_dev_ops structure Thermal: do thermal zone update after a cooling device registered Thermal: handle thermal zone device properly during system sleep Thermal: initialize thermal zone device correctly
2016-01-23Merge branches 'thermal-intel', 'thermal-suspend-fix' and 'thermal-soc' into ↵Zhang Rui5-38/+286
next
2016-01-06thermal: trip_point_temp_store() calls thermal_zone_device_update()Kuninori Morimoto1-1/+5
trip_point_temp_store() updates trip temperature. It should call thermal_zone_device_update() immediately. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-06thermal: rcar: rcar_thermal_get_temp() return error if strange tempKuninori Morimoto1-1/+11
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-06thermal: rcar: check irq possibility in rcar_thermal_irq_xxx()Kuninori Morimoto1-4/+5
Current rcar thermal driver sometimes checks irq possibility when it calls rcar_thermal_irq_enable/disable(), but sometimes not. This patch checks it inside rcar_thermal_irq_enable/disable(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-06thermal: rcar: check every rcar_thermal_update_temp() return valueKuninori Morimoto1-10/+12
Every rcar_thermal_update_temp() return value will be checked. And also, rcar_thermal_get_temp() always call rcar_thermal_update_temp() by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-06thermal: rcar: move rcar_thermal_dt_ids to upsideKuninori Morimoto1-6/+6
This patch is prepare for of-thermal support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-06thermal: rockchip: Support the RK3399 SoCs in thermal driverCaesar Wang1-0/+66
The RK3399 SoCs have two Temperature Sensors, channel 0 is for CPU. channel 1 is for GPU. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-06thermal: rockchip: Support the RK3228 SoCs in thermal driverCaesar Wang1-0/+81
The RK3228 SoCs has one Temperature Sensor, channel 0 is for CPU. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-06thermal: rockchip: fix a trivial typoCaesar Wang1-12/+13
This patchset trys to dictate unified format for driver. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-12-29Thermal: Enable Broxton SoC thermal reporting deviceAmy Wiles1-0/+10
Signed-off-by: Amy Wiles <amy.l.wiles@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-12-29thermal: constify pch_dev_ops structureJulia Lawall1-1/+1
The pch_dev_ops structure is never modified. It is only stored in a field that is already declared as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-12-29Thermal: do thermal zone update after a cooling device registeredChen Yu1-1/+13
When a new cooling device is registered, we need to update the thermal zone to set the new registered cooling device to a proper state. This fixes a problem that the system is cool, while the fan devices are left running on full speed after boot, if fan device is registered after thermal zone device. Here is the history of why current patch looks like this: https://patchwork.kernel.org/patch/7273041/ CC: <stable@vger.kernel.org> #3.18+ Reference:https://bugzilla.kernel.org/show_bug.cgi?id=92431 Tested-by: Manuel Krause <manuelkrause@netscape.net> Tested-by: szegad <szegadlo@poczta.onet.pl> Tested-by: prash <prash.n.rao@gmail.com> Tested-by: amish <ammdispose-arch@yahoo.com> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com>
2015-12-29Thermal: handle thermal zone device properly during system sleepZhang Rui1-0/+42
Current thermal code does not handle system sleep well because 1. the cooling device cooling state may be changed during suspend 2. the previous temperature reading becomes invalid after resumed because it is got before system sleep 3. updating thermal zone device during suspending/resuming is wrong because some devices may have already been suspended or may have not been resumed. Thus, the proper way to do this is to cancel all thermal zone device update requirements during suspend/resume, and after all the devices have been resumed, reset and update every registered thermal zone devices. This also fixes a regression introduced by: Commit 19593a1fb1f6 ("ACPI / fan: convert to platform driver") Because, with above commit applied, all the fan devices are attached to the acpi_general_pm_domain, and they are turned on by the pm_domain automatically after resume, without the awareness of thermal core. CC: <stable@vger.kernel.org> #3.18+ Reference: https://bugzilla.kernel.org/show_bug.cgi?id=78201 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=91411 Tested-by: Manuel Krause <manuelkrause@netscape.net> Tested-by: szegad <szegadlo@poczta.onet.pl> Tested-by: prash <prash.n.rao@gmail.com> Tested-by: amish <ammdispose-arch@yahoo.com> Tested-by: Matthias <morpheusxyz123@yahoo.de> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com>
2015-12-29Thermal: initialize thermal zone device correctlyZhang Rui3-4/+33
After thermal zone device registered, as we have not read any temperature before, thus tz->temperature should not be 0, which actually means 0C, and thermal trend is not available. In this case, we need specially handling for the first thermal_zone_device_update(). Both thermal core framework and step_wise governor is enhanced to handle this. And since the step_wise governor is the only one that uses trends, so it's the only thermal governor that needs to be updated. CC: <stable@vger.kernel.org> #3.18+ Tested-by: Manuel Krause <manuelkrause@netscape.net> Tested-by: szegad <szegadlo@poczta.onet.pl> Tested-by: prash <prash.n.rao@gmail.com> Tested-by: amish <ammdispose-arch@yahoo.com> Tested-by: Matthias <morpheusxyz123@yahoo.de> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com>
2015-12-09x86/platform/iosf_mbi: Remove duplicate definitionsAndy Shevchenko2-53/+51
The read and write opcodes are global for all units on SoC and even across Intel SoCs. Remove duplication of corresponding constants. At the same time convert all current users. No functional change. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Boon Leong Ong <boon.leong.ong@intel.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-23imx: thermal: use CPU temperature grade info for thresholdsTim Harvey1-15/+41
The IMX6Q/IMX6DL SoC's have a 2-bit temperature grade stored in OTP which is valid for all IMX6 SoC's (despite the fact that the IMXSDLRM and IMXSXRM do not document this - this has been proven via tests as well as verified by Freescale FAE). Instead of assuming a fixed 85C for passive cooling threshold and 105C for critical use the thermal grade for these configurations. We will set the critical to maxT - 5C and passive to maxT - 10C. Cc: Anson Huang <b20788@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> ---- v3: - rebase against linux-soc-thermal.git - added ack's from Shawn and Jon v2: - remove check for IMX6Q and update comments: The OTP values have been tested on IMX6SOLO, IMX6DUALLITE, and IMX6SX and Freescale FAE has shared data with me that the OTP settings are the same and that the reference manuals will reflect this in their next updates. - set critical to max - 5C - set passive to max - 10C - display max temp in info - do not allow passive to be set above critical Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-23Revert "thermal: qcom_spmi: allow compile test"Arnd Bergmann1-1/+1
This just caused build errors: warning: (QCOM_SPMI_TEMP_ALARM) selects REGMAP_SPMI which has unmet direct dependencies (SPMI) drivers/built-in.o: In function `regmap_spmi_ext_gather_write': :(.text+0x609b0): undefined reference to `spmi_ext_register_write' :(.text+0x609f0): undefined reference to `spmi_ext_register_writel' While it's generally a good idea to allow compile testing, in this case, it just doesn't work, so reverting the patch that introduced the compile-test variant seems the most appropriate solution. Note that SPMI also has a 'depends on ARCH_QCOM || COMPILE_TEST' statement, so we should be able to enable SPMI on all architectures for compile testing already. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cb7fb4d34202 ("thermal: qcom_spmi: allow compile test") Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-16thermal: rcar_thermal: remove redundant operationKuninori Morimoto1-28/+21
Probe error operation and remove operation are same. Let's use same function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-16thermal: of-thermal: Reduce log level for message when can't fine thermal zoneJiada Wang1-1/+1
Some systems register thermal zone by themself and don't need to have thermal zones node in DT. Therefore reduce the log level from ERROR to DEBUG when thermal zone node can't be find in of_thermal_destroy_zones(). Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: power_allocator: Use temperature reading from tzKapileshwar Singh1-17/+7
All thermal governors use the temperature value stored in struct thermal_zone_device. thermal_zone_device->temperature power_allocator governor should not deviate from this and use the same. Cc: Javi Merino <javi.merino@arm.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Javi Merino <javi.merino@arm.com> Reported-by: Sugumar Natarajan <sugumar.natarajan@arm.com> Signed-off-by: Kapileshwar Singh <kapileshwar.singh@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: Support the RK3368 SoCs in thermal driverCaesar Wang1-0/+72
The RK3368 SoCs support to 2 channel TS-ADC, the temperature criteria of each channel can be configurable. The system has two Temperature Sensors, channel 0 is for CPU, and channel 1 is for GPU. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: consistently use int for temperaturesCaesar Wang1-8/+8
As Temperature is currently represented as int not long in the thermal framework since use int intead of unsigned long/long to represent temperature to avoid bogus overheat detection when negative temperature reported. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>