summaryrefslogtreecommitdiffstats
path: root/drivers/thermal
AgeCommit message (Collapse)AuthorFilesLines
2017-07-14Merge branch 'next' of ↵Linus Torvalds10-384/+305
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Improve thermal cpu_cooling interaction with cpufreq core. The cpu_cooling driver is designed to use CPU frequency scaling to avoid high thermal states for a platform. But it wasn't glued really well with cpufreq core. For example clipped-cpus is copied from the policy structure and its much better to use the policy->cpus (or related_cpus) fields directly as they may have got updated. Not that things were broken before this series, but they can be optimized a bit more. This series tries to improve interactions between cpufreq core and cpu_cooling driver and does some fixes/cleanups to the cpu_cooling driver. (Viresh Kumar) - A couple of fixes and cleanups in thermal core and imx, hisilicon, bcm_2835, int340x thermal drivers. (Arvind Yadav, Dan Carpenter, Sumeet Pawnikar, Srinivas Pandruvada, Willy WOLFF) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits) thermal: bcm2835: fix an error code in probe() thermal: hisilicon: Handle return value of clk_prepare_enable thermal: imx: Handle return value of clk_prepare_enable thermal: int340x: check for sensor when PTYP is missing Thermal/int340x: Fix few typos and kernel-doc style thermal: fix source code documentation for parameters thermal: cpu_cooling: Replace kmalloc with kmalloc_array thermal: cpu_cooling: Rearrange struct cpufreq_cooling_device thermal: cpu_cooling: 'freq' can't be zero in cpufreq_state2power() thermal: cpu_cooling: don't store cpu_dev in cpufreq_cdev thermal: cpu_cooling: get_level() can't fail thermal: cpu_cooling: create structure for idle time stats thermal: cpu_cooling: merge frequency and power tables thermal: cpu_cooling: get rid of 'allowed_cpus' thermal: cpu_cooling: OPPs are registered for all CPUs thermal: cpu_cooling: store cpufreq policy cpufreq: create cpufreq_table_count_valid_entries() thermal: cpu_cooling: use cpufreq_policy to register cooling device thermal: cpu_cooling: get rid of a variable in cpufreq_set_cur_state() thermal: cpu_cooling: remove cpufreq_cooling_get_level() ...
2017-07-07Merge (most of) tag 'mfd-next-4.13' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Intel Cherry Trail Whiskey Cove PMIC - TI LP87565 PMIC New Device Support: - Add support for Cannonlake to intel-lpss-pci - Add support for Simatic IOT2000 to intel_quark_i2c_gpio New Functionality: - Add Regulator support (axp20x) Fix-ups: - Rework IRQ handling (intel_soc_pmic_bxtwc, rtsx_pcr, cros_ec) - Remove unused/unwelcome code (ipaq-micro, wm831x-core, da9062-core) - Provide deregistration on unbind (rn5t618) - Rework DT code/documentation (arizona) - Constify things (fsl-imx25-tsadc) - MAINTAINERS updates (DA9062/61) - Kconfig configuration adaptions (INTEL_SOC_PMIC, MFD_AXP20X_I2C) - Switch to DMI matching (intel_quark_i2c_gpio) - Provide an appropriate level of error checking (wm831x-{i2c,spi}, twl4030-irq, tc6393xb) - Make use of devm_* (resource handling) calls (intel_soc_pmic_bxtwc, stm32-timers, atmel-flexcom, cros_ec, fsl-imx25-tsadc, exynos-lpass, palmas, qcom-spmi-pmic, smsc-ece1099, motorola-cpcap)" [ Skipped the last commit in that series that added eight thousand lines of pointless repeated register definitions. - Linus ] * tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (38 commits) mfd: Add LP87565 PMIC support mfd: cros_ec: Free IRQ on exit dt-bindings: vendor-prefixes: Add arctic to vendor prefix mfd: da9061: Fix to remove BBAT_CONT register from chip model mfd: da9061: Fix to remove BBAT_CONT register from chip model mfd: axp20x-i2c: Document that this must be builtin on x86 mfd: Add Cherry Trail Whiskey Cove PMIC driver mfd: tc6393xb: Handle return value of clk_prepare_enable mfd: intel_quark_i2c_gpio: Add support for SIMATIC IOT2000 platform mfd: intel_quark_i2c_gpio: Use dmi_system_id table for retrieving frequency mfd: motorola-cpcap: Use devm_of_platform_populate() mfd: smsc-ece: Use devm_of_platform_populate() mfd: qcom-spmi-pmic: Use devm_of_platform_populate() mfd: palmas: Use devm_of_platform_populate() mfd: exynos: Use devm_of_platform_populate() mfd: fsl-imx25: Use devm_of_platform_populate() mfd: cros_ec: Use devm_of_platform_populate() mfd: atmel: Use devm_of_platform_populate() mfd: stm32-timers: Use devm_of_platform_populate() mfd: intel_soc_pmic: Select designware i2c-bus driver ...
2017-07-05Merge branches 'thermal-core', 'thermal-intel' and 'thermal-soc' into nextZhang Rui7-381/+301
2017-07-05Merge branch 'linus' of ↵Zhang Rui5-376/+288
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2017-07-03Merge tag 'usb-4.13-rc1' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big patchset of USB and PHY driver updates for 4.13-rc1. On the PHY side, they decided to move files around to "make things easier" in their tree. Hopefully that wasn't a mistake, but in linux-next testing, we haven't had any reported problems. There's the usual set of gadget and xhci and musb updates in here as well, along with a number of smaller updates for a raft of different USB drivers. Full details in the shortlog, nothing really major. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (173 commits) Add USB quirk for HVR-950q to avoid intermittent device resets USB hub_probe: rework ugly goto-into-compound-statement usb: host: ohci-pxa27x: Handle return value of clk_prepare_enable USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick usbip: Fix uninitialized variable bug in vhci usb: core: read USB ports from DT in the usbport LED trigger driver dt-bindings: leds: document new trigger-sources property usb: typec: ucsi: Add ACPI driver usb: typec: Add support for UCSI interface usb: musb: compress return logic into one line USB: serial: propagate late probe errors USB: serial: refactor port endpoint setup usb: musb: tusb6010_omap: Convert to DMAengine API ARM: OMAP2+: DMA: Add slave map entries for 24xx external request lines usb: musb: tusb6010: Handle DMA TX completion in DMA callback as well usb: musb: tusb6010_omap: Allocate DMA channels upfront usb: musb: tusb6010_omap: Create new struct for DMA data/parameters usb: musb: tusb6010_omap: Use one musb_ep_select call in tusb_omap_dma_program usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks usb: musb: Add quirk to avoid skb reserve in gadget mode ...
2017-06-30thermal: bcm2835: fix an error code in probe()Dan Carpenter1-1/+0
This causes a static checker because we're passing a valid pointer to PTR_ERR(). "err" is already the correct error code, so we can just delete this line. Fixes: bcb7dd9ef206 ("thermal: bcm2835: add thermal driver for bcm2835 SoC") Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-06-30thermal: hisilicon: Handle return value of clk_prepare_enableArvind Yadav1-1/+4
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-06-30thermal: imx: Handle return value of clk_prepare_enableArvind Yadav1-1/+4
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-06-29thermal: int340x: check for sensor when PTYP is missingSrinivas Pandruvada1-2/+10
For INT3403 sensor PTYP field is mandatory. But some platforms didn't have this field for sensors. This cause load failure for int3403 driver. This change checks for the presence of _TMP method and if present, then treats this device as a sensor. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-06-29Thermal/int340x: Fix few typos and kernel-doc styleSumeet Pawnikar1-3/+3
This patch fix the few typos in function header of acpi_parse_trt. Also, fix the typo in kernel debug message for acpi_parse_art. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-06-29thermal: fix source code documentation for parametersWilly WOLFF3-3/+4
Some parameters are not documented, or not present at all, in thermal governors code. Signed-off-by: Willy Wolff <willy.mh.wolff@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-06-19mfd: intel_soc_pmic_bxtwc: Remove thermal second level IRQsKuppuswamy Sathyanarayanan1-1/+1
Since all second level thermal IRQs are consumed by the same device(bxt_wcove_thermal), there is no need to expose them as separate interrupts. We can just export only the first level IRQs for thermal and let the device(bxt_wcove_thermal) driver handle the second level IRQs based on thermal interrupt status register. Also, just using only the first level IRQ will eliminate the bug involved in requesting only the second level IRQ and not explicitly enable the first level IRQ. For more info on this issue please read the details at, https://lkml.org/lkml/2017/2/27/148 This patch also makes relevant change in bxt_wcove_thermal driver to use only first level PMIC thermal IRQ. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-06-13thermal: max77620: fix pinmux conflict on reprobeJohan Hovold1-5/+3
Use the new helper for reusing a device-tree node of another device instead of managing the node references explicitly. This also makes sure that the new of_node_reuse flag is set if the device is ever reprobed, something which specifically now avoids driver core from attempting to claim any pinmux resources already claimed by the parent device. Fixes: ec4664b3fd6d ("thermal: max77620: Add thermal driver for reporting junction temp") Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13thermal: max77620: fix device-node reference imbalanceJohan Hovold1-2/+8
The thermal child device reuses the parent MFD-device device-tree node when registering a thermal zone, but did not take a reference to the node. This leads to a reference imbalance, and potential use-after-free, when the node reference is dropped by the platform-bus device destructor (once for the child and later again for the parent). Fix this by dropping any reference already held to a device-tree node and getting a reference to the parent's node which will be balanced on reprobe or on platform-device release, whichever comes first. Note that simply clearing the of_node pointer on probe errors and on driver unbind would not allow the use of device-managed resources as specifically thermal_zone_of_sensor_unregister() claims that a valid device-tree node pointer is needed during deregistration (even if it currently does not seem to use it). Fixes: ec4664b3fd6d ("thermal: max77620: Add thermal driver for reporting junction temp") Cc: stable <stable@vger.kernel.org> # 4.9 Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thermal: int340x_thermal: fix compile after the UUID API switchChristoph Hellwig1-2/+2
Fix the compile after the switch to the UUID API in commit f4c19ac9 ("thermal: int340x_thermal: Switch to use new generic UUID API"). Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-09thermal: int340x_thermal: Switch to use new generic UUID APIAndy Shevchenko1-4/+4
There are new types and helpers that are supposed to be used in new code. As a preparation to get rid of legacy types and API functions do the conversion here. The conversion fixes a potential bug in int340x_thermal as well since we have to use memcmp() on binary data. Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-27thermal: cpu_cooling: Replace kmalloc with kmalloc_arrayViresh Kumar1-2/+3
Checkpatch reports following: WARNING: Prefer kmalloc_array over kmalloc with multiply + cpufreq_cdev->freq_table = kmalloc(sizeof(*cpufreq_cdev->freq_table) * i, Fix that. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: Rearrange struct cpufreq_cooling_deviceViresh Kumar1-7/+8
This shrinks the size of the structure on arm64 by 8 bytes by avoiding padding of 4 bytes at two places. Also add missing doc comment for freq_table Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: 'freq' can't be zero in cpufreq_state2power()Viresh Kumar1-3/+4
The frequency table shouldn't have any zero frequency entries and so such a check isn't required. Though it would be better to make sure 'state' is within limits. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: don't store cpu_dev in cpufreq_cdevViresh Kumar1-12/+10
'cpu_dev' is used by only one function, get_static_power(), and it wouldn't be time consuming to get the cpu device structure within it. This would help removing cpu_dev from struct cpufreq_cooling_device. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: get_level() can't failViresh Kumar1-15/+5
The frequency passed to get_level() is returned by cpu_power_to_freq() and it is guaranteed that get_level() can't fail. Get rid of error code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: create structure for idle time statsViresh Kumar1-28/+25
We keep two arrays for idle time stats and allocate memory for them separately. It would be much easier to follow if we create an array of idle stats structure instead and allocate it once. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: merge frequency and power tablesViresh Kumar1-86/+67
The cpu_cooling driver keeps two tables: - freq_table: table of frequencies in descending order, built from policy->freq_table. - power_table: table of frequencies and power in ascending order, built from OPP table. If the OPPs are used for the CPU device then both these tables are actually built using the OPP core and should have the same frequency entries. And there is no need to keep separate tables for this. Lets merge them both. Note that the new table is in descending order of frequencies and so the 'for' loops were required to be fixed at few places to make it work. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: get rid of 'allowed_cpus'Viresh Kumar1-56/+25
'allowed_cpus' is a copy of policy->related_cpus and can be replaced by it directly. At some places we are only concerned about online CPUs and policy->cpus can be used there. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: OPPs are registered for all CPUsViresh Kumar1-15/+11
The OPPs are registered for all CPUs of a cpufreq policy now and we don't need to run the loop in build_dyn_power_table(). Just check for the policy->cpu and we should be fine. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: store cpufreq policyViresh Kumar1-0/+3
The cpufreq policy can be used by the cpu_cooling driver, lets store it in the cpufreq_cooling_device structure. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27cpufreq: create cpufreq_table_count_valid_entries()Viresh Kumar1-13/+9
We need such a routine at two places already, lets create one. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: use cpufreq_policy to register cooling deviceViresh Kumar3-50/+55
The CPU cooling driver uses the cpufreq policy, to get clip_cpus, the frequency table, etc. Most of the callers of CPU cooling driver's registration routines have the cpufreq policy with them, but they only pass the policy->related_cpus cpumask. The __cpufreq_cooling_register() routine then gets the policy by itself and uses it. It would be much better if the callers can pass the policy instead directly. This also fixes a basic design flaw, where the policy can be freed while the CPU cooling driver is still active. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: get rid of a variable in cpufreq_set_cur_state()Viresh Kumar1-2/+1
'cpu' is used at only one place and there is no need to keep a separate variable for it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: remove cpufreq_cooling_get_level()Viresh Kumar1-32/+1
There is only one user of cpufreq_cooling_get_level() and that already has pointer to the cpufreq_cdev structure. It can directly call get_level() instead and we can get rid of cpufreq_cooling_get_level(). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: replace cool_dev with cdevViresh Kumar1-19/+18
Objects of "struct thermal_cooling_device" are named a bit inconsistently. Lets use cdev everywhere. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: Name cpufreq cooling devices as cpufreq_cdevViresh Kumar1-124/+124
Objects of "struct cpufreq_cooling_device" are named a bit inconsistently. Lets use cpufreq_cdev everywhere. Also note that the lists containing such devices is renamed similarly too. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: rearrange globalsViresh Kumar1-1/+1
Just to make it look better. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-27thermal: cpu_cooling: Avoid accessing potentially freed structuresViresh Kumar1-1/+3
After the lock is dropped, it is possible that the cpufreq_dev gets freed before we call get_level() and that can cause kernel to crash. Drop the lock after we are done using the structure. Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Fixes: 02373d7c69b4 ("thermal: cpu_cooling: fix lockdep problems in cpu_cooling") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23thermal: broadcom: ns-thermal: default on iProc SoCsJon Mason1-4/+5
Tweak the Kconfig description to mention support for NSP and make the default on for iProc based platforms. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23ti-soc-thermal: Fix a typo in a comment lineMarkus Elfring1-1/+1
Add a missing character in this description for a function. Acked-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23ti-soc-thermal: Delete error messages for failed memory allocations in ↵Markus Elfring1-6/+2
ti_bandgap_build() The script "checkpatch.pl" pointed information out like the following. WARNING: Possible unnecessary 'out of memory' message Thus remove such statements here. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Acked-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()Markus Elfring1-2/+2
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". This issue was detected by using the Coccinelle software. Acked-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23thermal: core: make thermal_emergency_poweroff staticColin Ian King1-1/+1
Making thermal_emergency_poweroff static fixes sparse warning: drivers/thermal/thermal_core.c:6: warning: symbol 'thermal_emergency_poweroff' was not declared. Should it be static? Fixes: ef1d87e06ab4 ("thermal: core: Add a back up thermal shutdown mechanism") Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23thermal: qoriq: remove useless call for of_thermal_get_trip_points()Masahiro Yamada1-3/+0
Building this driver with W=1 reports: warning: variable 'trip' set but not used [-Wunused-but-set-variable] The call for of_thermal_get_trip_points() is useless. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-12Merge branch 'next' of ↵Linus Torvalds19-258/+1157
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Fix a problem where orderly_shutdown() is called for multiple times due to multiple critical overheating events raised in a short period by platform thermal driver. (Keerthy) - Introduce a backup thermal shutdown mechanism, which invokes kernel_power_off()/emergency_restart() directly, after orderly_shutdown() being issued for certain amount of time(specified via Kconfig). This is useful in certain conditions that userspace may be unable to power off the system in a clean manner and leaves the system in a critical state, like in the middle of driver probing phase. (Keerthy) - Introduce a new interface in thermal devfreq_cooling code so that the driver can provide more precise data regarding actual power to the thermal governor every time the power budget is calculated. (Lukasz Luba) - Introduce BCM 2835 soc thermal driver and northstar thermal driver, within a new sub-folder. (Rafał Miłecki) - Introduce DA9062/61 thermal driver. (Steve Twiss) - Remove non-DT booting on TI-SoC driver. Also add support to fetching coefficients from DT. (Keerthy) - Refactorf RCAR Gen3 thermal driver. (Niklas Söderlund) - Small fix on MTK and intel-soc-dts thermal driver. (Dawei Chien, Brian Bian) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) thermal: core: Add a back up thermal shutdown mechanism thermal: core: Allow orderly_poweroff to be called only once Thermal: Intel SoC DTS: Change interrupt request behavior trace: thermal: add another parameter 'power' to the tracing function thermal: devfreq_cooling: add new interface for direct power read thermal: devfreq_cooling: refactor code and add get_voltage function thermal: mt8173: minor mtk_thermal.c cleanups thermal: bcm2835: move to the broadcom subdirectory thermal: broadcom: ns: specify myself as MODULE_AUTHOR thermal: da9062/61: Thermal junction temperature monitoring driver Documentation: devicetree: thermal: da9062/61 TJUNC temperature binding thermal: broadcom: add Northstar thermal driver dt-bindings: thermal: add support for Broadcom's Northstar thermal thermal: bcm2835: add thermal driver for bcm2835 SoC dt-bindings: Add thermal zone to bcm2835-thermal example thermal: rcar_gen3_thermal: add suspend and resume support thermal: rcar_gen3_thermal: store device match data in private structure thermal: rcar_gen3_thermal: enable hardware interrupts for trip points thermal: rcar_gen3_thermal: record and check number of TSCs found thermal: rcar_gen3_thermal: check that TSC exists before memory allocation ...
2017-05-06Merge branch 'thermal-soc' into nextZhang Rui16-213/+960
2017-05-06Merge branch 'linus' of ↵Zhang Rui16-213/+960
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2017-05-05Merge branch 'backup-thermal-shutdown' into nextZhang Rui2-1/+80
2017-05-05Merge branches 'thermal-core' and 'thermal-intel' into nextZhang Rui1-3/+6
2017-05-05thermal: core: Add a back up thermal shutdown mechanismKeerthy2-0/+70
orderly_poweroff is triggered when a graceful shutdown of system is desired. This may be used in many critical states of the kernel such as when subsystems detects conditions such as critical temperature conditions. However, in certain conditions in system boot up sequences like those in the middle of driver probes being initiated, userspace will be unable to power off the system in a clean manner and leaves the system in a critical state. In cases like these, the /sbin/poweroff will return success (having forked off to attempt powering off the system. However, the system overall will fail to completely poweroff (since other modules will be probed) and the system is still functional with no userspace (since that would have shut itself off). However, there is no clean way of detecting such failure of userspace powering off the system. In such scenarios, it is necessary for a backup workqueue to be able to force a shutdown of the system when orderly shutdown is not successful after a configurable time period. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-05-05thermal: core: Allow orderly_poweroff to be called only onceKeerthy1-1/+10
thermal_zone_device_check --> thermal_zone_device_update --> handle_thermal_trip --> handle_critical_trips --> orderly_poweroff The above sequence happens every 250/500 mS based on the configuration. The orderly_poweroff function is getting called every 250/500 mS. With a full fledged file system it takes at least 5-10 Seconds to power off gracefully. In that period due to the thermal_zone_device_check triggering periodically the thermal work queues bombard with orderly_poweroff calls multiple times eventually leading to failures in gracefully powering off the system. Make sure that orderly_poweroff is called only once. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-05-05Thermal: Intel SoC DTS: Change interrupt request behaviorBrian Bian1-3/+6
The interrupt request call in Intel SoC DTS driver may fail if there is no underlying BIOS support. However, the user space thermal daemon can still use the thermal zones created by the SoC DTS driver in polling mode, therefore, instead of bailing out on interrupt request failures, it is better just to log a warning message and continue the init process. Signed-off-by: Brian Bian <brian.bian@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-05-05trace: thermal: add another parameter 'power' to the tracing functionLukasz Luba1-1/+1
This patch adds another parameter to the trace function: trace_thermal_power_devfreq_get_power(). In case when we call directly driver's code for the real power, we do not have static/dynamic_power values. Instead we get total power in the '*power' value. The 'static_power' and 'dynamic_power' are set to 0. Therefore, we have to trace that '*power' value in this scenario. CC: Steven Rostedt <rostedt@goodmis.org> CC: Ingo Molnar <mingo@redhat.com> CC: Zhang Rui <rui.zhang@intel.com> CC: Eduardo Valentin <edubezval@gmail.com> Acked-by: Javi Merino <javi.merino@kernel.org> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
2017-05-05thermal: devfreq_cooling: add new interface for direct power readLukasz Luba1-23/+82
This patch introduces a new interface for device drivers connected to devfreq_cooling in the thermal framework: get_real_power(). Some devices have more sophisticated methods (like power counters) to approximate the actual power that they use. In the previous implementation we had a pre-calculated power table which was then scaled by 'utilization' ('busy_time' and 'total_time' taken from devfreq 'last_status'). With this new interface the driver can provide more precise data regarding actual power to the thermal governor every time the power budget is calculated. We then use this value and calculate the real resource utilization scaling factor. Reviewed-by: Chris Diamand <chris.diamand@arm.com> Acked-by: Javi Merino <javi.merino@kernel.org> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-31 05:58:37 +0000