summaryrefslogtreecommitdiffstats
path: root/drivers/thermal
AgeCommit message (Collapse)AuthorFilesLines
2019-05-14drivers: thermal: tsens: Add new operation to check if a sensor is enabledAmit Kucheria5-0/+22
is_sensor_enabled() checks if the sensors are enabled on this platform. It is possible that the SoC might choose not to enable all the sensors that the IP block is capable of supporting. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Don't print error message on -EPROBE_DEFERAmit Kucheria1-1/+2
We print a calibration failure message on -EPROBE_DEFER from nvmem/qfprom as follows: [ 3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4 [ 3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed [ 3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4 This confuses people when, in fact, calibration succeeds later when nvmem/qfprom device is available. Don't print this message on a -EPROBE_DEFER. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Save reference to the device pointer and use itAmit Kucheria1-7/+8
Code cleanup making it easier to read Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Introduce reg_fields to deal with register descriptionAmit Kucheria5-58/+370
As we add support for newer versions of the TSENS IP, the current approach isn't scaling because registers and bitfields get moved around, requiring platform-specific hacks in the code. By moving to regmap, we can hide the register level differences away from the code. Define a common set of registers and bit-fields that we care about across the various tsens IP versions. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Merge tsens-8974 into tsens-v0_1Amit Kucheria4-239/+236
8974 and 8916 have the same version of the TSENS IP. Merge the files to allow for better code reuse. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename constants to prepare to merge with tsens-8974Amit Kucheria1-44/+44
Some #defines in tsens-v_0_1.c clash with those in tsens-8974.c. Prefix them with 8916 to avoid the clash so we can merge the two files. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens-8916 to prepare to merge with tsens-8974Amit Kucheria2-1/+1
8916 and 8974 use v0.1.0 of the TSENS IP. Rename tsens-8916 to prepare it for merging with tsens-8974 in a later commit. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Function prototypes should have argument namesAmit Kucheria1-12/+12
check_patch complains a lot as follows: WARNING: function definition argument 'struct tsens_priv *' should also have an identifier name + int (*init)(struct tsens_priv *); Fix it. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Use consistent names for variablesAmit Kucheria1-3/+3
tsens_get_temp() uses the name 'data' for the void pointer, use the same in tsens_get_trend() for consistency. Remove a stray space while we're at it. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename variable tmdevAmit Kucheria7-132/+131
tmdev seems to imply that this is a device pointer when in fact it is just private platform data for each tsens device. Rename it to priv improve code readability. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens_deviceAmit Kucheria7-35/+35
Rename to tsens_priv to denote that it is private data for each tsens instance. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens_dataAmit Kucheria6-10/+10
Rename to tsens_plat_data to denote that it is platform-data passed in at compile-time. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Document the data structuresAmit Kucheria1-3/+28
Describe how the TSENS device and the various sensors connected to it are described in the driver Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: stm32: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: Kconfig: pedantic cleanupsEnrico Weigelt, metux IT consult2-13/+13
Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13of: thermal: Improve print informationYangtao Li1-0/+3
Define pr_fmt macro to add a prefix to the message, this can make the thermal log better recognized. Before: [ 0.602672] nfc: nfc_init: NFC Core ver 0.1 [ 0.602828] NET: Registered protocol family 39 [ 0.603435] clocksource: Switched to clocksource mct-frc [ 0.746216] failed to build thermal zone cpu-thermal: -22 [ 0.746451] NET: Registered protocol family 2 After: [ 0.602804] NET: Registered protocol family 39 [ 0.603463] clocksource: Switched to clocksource mct-frc [ 0.746309] thermal_sys: failed to build thermal zone cpu-thermal: -22 [ 0.746545] NET: Registered protocol family 2 Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: enable OC hw throttleWei Ni1-10/+120
Parse Over Current settings from DT and program them to generate interrupts. Also enable hw throttling whenever there are OC events. Log the OC events as debug messages. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: add support for EDP IRQWei Ni1-0/+420
Add support to generate OC (over-current) interrupts to indicate the OC event and print out alarm messages. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: add set_trips functionalityWei Ni5-5/+90
Implement set_trips ops to set passive trip points. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: add support for thermal IRQWei Ni1-0/+136
Support to generate an interrupt when the temperature crosses a programmed threshold and notify the thermal framework. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: add support for gpu hw-throttleWei Ni1-33/+85
Add support to trigger pulse skippers on the GPU when a HOT trip point is triggered. The pulse skippers can be signalled to throttle at low, medium and high depths\levels. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: support hw and sw shutdownWei Ni3-15/+98
Currently the critical trip points in thermal framework are the only way to specify a temperature at which HW should shutdown. This is insufficient for certain platforms which would want an orderly software shutdown in addition to HW shutdown. This change support to parse "nvidia, thermtrips" property, it allows soctherm DT to specify thermtrip temperatures so that critical trip points framework can be used for doing software shutdown. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-03-18Merge branches 'fixes' and 'thermal-intel' into nextZhang Rui2-5/+18
2019-03-18thermal/intel_powerclamp: fix truncated kthread nameZhang Rui1-1/+1
kthread name only allows 15 characters (TASK_COMMON_LEN is 16). Thus rename the kthreads created by intel_powerclamp driver from "kidle_inject/ + decimal cpuid" to "kidle_inj/ + decimal cpuid" to avoid truncated kthead name for cpu 100 and later. Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-03-18thermal: mtk: Allocate enough space for mtk_thermal.Pi-Hsun Shih1-2/+5
The mtk_thermal struct contains a 'struct mtk_thermal_bank banks[];', but the allocation only allocates sizeof(struct mtk_thermal) bytes, which cause out of bound access with the ->banks[] member. Change it to a fixed size array instead. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-03-18thermal/int340x_thermal: fix mode settingMatthew Garrett1-4/+3
int3400 only pushes the UUID into the firmware when the mode is flipped to "enable". The current code only exposes the mode flag if the firmware supports the PASSIVE_1 UUID, which not all machines do. Remove the restriction. Signed-off-by: Matthew Garrett <mjg59@google.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-03-18thermal/int340x_thermal: Add additional UUIDsMatthew Garrett1-0/+14
Add more supported DPTF policies than the driver currently exposes. Signed-off-by: Matthew Garrett <mjg59@google.com> Cc: Nisha Aram <nisha.aram@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-03-18thermal: cpu_cooling: Remove unused cur_freq variableShaokun Zhang1-2/+1
The 'cur_freq' local variable became unused after commit 84fe2cab4859 ("cpu_cooling: Drop static-power related stuff"), let's remove it. Cc: Amit Daniel Kachhap <amit.kachhap@gmail.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Javi Merino <javi.merino@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-03-18thermal: bcm2835: Fix crash in bcm2835_thermal_debugfsPhil Elwell1-5/+4
"cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer dereference in bcm2835_thermal_debugfs. The driver makes use of the implementation details of the thermal framework to retrieve a pointer to its private data from a struct thermal_zone_device, and gets it wrong - leading to the crash. Instead, store its private data as the drvdata and retrieve the thermal_zone_device pointer from it. Fixes: bcb7dd9ef206 ("thermal: bcm2835: add thermal driver for bcm2835 SoC") Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-03-18thermal: samsung: Fix incorrect check after code mergeMarek Szyprowski1-1/+1
Merge commit 19785cf93b6c ("Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal") broke the code introduced by commit ffe6e16f14fa ("thermal: exynos: Reduce severity of too early temperature read"). Restore the original code from the mentioned commit to finally fix the warning message during boot: thermal thermal_zone0: failed to read out thermal zone (-22) Reported-by: Marian Mihailescu <mihailescu2m@gmail.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 19785cf93b6c ("Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal") Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-03-18thermal/intel_powerclamp: fix __percpu declaration of worker_dataLuc Van Oostenryck1-1/+1
This variable is declared as: static struct powerclamp_worker_data * __percpu worker_data; In other words, a percpu pointer to struct ... But this variable not used like so but as a pointer to a percpu struct powerclamp_worker_data. So fix the declaration as: static struct powerclamp_worker_data __percpu *worker_data; This also quiets Sparse's warnings from __verify_pcpu_ptr(), like: 494:49: warning: incorrect type in initializer (different address spaces) 494:49: expected void const [noderef] <asn:3> *__vpp_verify 494:49: got struct powerclamp_worker_data * Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-03-08Merge branch 'linus' of ↵Linus Torvalds9-130/+514
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal soc updates from Eduardo Valentin: "Specifics: - mediatek thermal now supports MT8183 - broadcom thermal now supports Stingray - qoirq now supports multiple sensors - fixes on different drivers: rcar, tsens, tegra Some new drivers are still pending further review and I chose to leave them for the next merge window while still sending this material" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: rcar_gen3_thermal: Register hwmon sysfs interface thermal/qcom/tsens-common : fix possible object reference leak thermal: tegra: add get_trend ops thermal: tegra: fix memory allocation thermal: tegra: remove unnecessary warnings thermal: mediatek: add support for MT8183 dt-bindings: thermal: add binding document for mt8183 thermal controller thermal: mediatek: add flag for bank selection thermal: mediatek: add thermal controller offset thermal: mediatek: add calibration item thermal: mediatek: add common index of vts settings. thermal: mediatek: fix register index error thermal: qoriq: add multiple sensors support thermal: broadcom: Add Stingray thermal driver dt-bindings: thermal: Add binding document for SR thermal
2019-02-24Merge back earlier cpufreq material for v5.1.Rafael J. Wysocki1-0/+1
2019-02-20thermal: rcar_gen3_thermal: Register hwmon sysfs interfaceMarek Vasut1-0/+19
Register the hwmon sysfs interface on R-Car Gen3 thermal driver to align it with Gen2 driver. Use devm_add_action() to unregister the hwmon interface automatically. Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: linux-renesas-soc@vger.kernel.org To: linux-pm@vger.kernel.org From: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal/qcom/tsens-common : fix possible object reference leakPeng Hao1-10/+23
of_find_device_by_node() takes a reference to the struct device when it finds a match via get_device. We also should make sure to drop the reference to the device taken by of_find_device_by_node() when returning error. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: tegra: add get_trend opsWei Ni1-0/+32
Add support for get_trend ops that allows soctherm sensors to be used with the step-wise governor. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: tegra: fix memory allocationWei Ni1-1/+1
Fix memory allocation to store the pointers to thermal_zone_device. Signed-off-by: Wei Ni <wni@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: tegra: remove unnecessary warningsWei Ni1-2/+2
Convert warnings to info as not all platforms may have all the thresholds and sensors enabled. Signed-off-by: Wei Ni <wni@nvidia.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: mediatek: add support for MT8183Michael Kao1-1/+98
MT8183 has two built-in thermal controllers with total six thermal sensors. And it doesn't have bank, so doesn't need to select bank. This patch adds support for mt8183. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: add flag for bank selectionMichael Kao1-6/+14
For past ic designs, the thermal controller should select banks before reading the thermal sensor. And the new ic design architecture removes this mechanism. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: add thermal controller offsetMichael Kao1-25/+54
One thermal controller can read four sensors at most, so we need to add controller_offset for the project with more than four sensors to reuse the same register settings. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: add calibration itemMichael Kao1-1/+18
Add calibration item in thermal_data to support the project with different calibration coefficient. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: add common index of vts settings.Michael Kao1-24/+69
Each project has different number of vts settings. For the MT2701 just have to set three vts, but the original code flow add five unnecessary vts. Add common index of vts settings for scalablity, and reduce the setting of unnecessary vts. Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: mediatek: fix register index errorMichael Kao1-2/+4
The index of msr and adcpnp should match the sensor which belongs to the selected bank in the for loop. Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.") Signed-off-by: Michael Kao <michael.kao@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: qoriq: add multiple sensors supportYuantian Tang1-57/+47
The QorIQ Layerscape SoC has several thermal sensors but the current driver only supports one. Massage the code to be sensor oriented and allow the support for multiple sensors. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: broadcom: Add Stingray thermal driverPramod Kumar4-1/+133
Stingray SoC has six temperature sensor and those are configured, controlled and accessed to read temperature and update in DDR memory using m0 firmware. All six sensors has been given 4 bytes of memory in DDR to write temperature in millivolts. This thermal driver read temperature values from DDR because no direct access to sensors. Like this all temparature sensors are monitored and trips at critical temperature. If driver can't handle thermal runaways because of any unknown reason, then firmware in m0 Processor will handle. Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: cpu_cooling: Clarify error messageAmit Kucheria1-1/+1
Make it clear that it is a failure if the cpufreq driver was unable to register as a cooling device. Makes it easier to find in logs and grepping for words like fail, err, warn. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-05thermal: of-thermal: Print name of device node with errorAmit Kucheria1-2/+2
Make it easier to debug devicetree definition in case of errors. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-29thermal: cpu_cooling: Require thermal core to be compiled inAmit Kucheria1-0/+1
The CPU cooling driver (cpu_cooling.c) allows the platform's cpufreq driver to register as a cooling device and cool down the platform by throttling the CPU frequency. In order to be able to auto-register a cpufreq driver as a cooling device from the cpufreq core, we need access to code inside cpu_cooling.c which, in turn, accesses code inside thermal core. CPU_FREQ is a bool while THERMAL is tristate. In some configurations (e.g. allmodconfig), CONFIG_THERMAL ends up as a module while CONFIG_CPU_FREQ is compiled in. This leads to following error: drivers/cpufreq/cpufreq.o: In function `cpufreq_offline': cpufreq.c:(.text+0x407c): undefined reference to `cpufreq_cooling_unregister' drivers/cpufreq/cpufreq.o: In function `cpufreq_online': cpufreq.c:(.text+0x70c0): undefined reference to `of_cpufreq_cooling_register' Given that platforms using CPU_THERMAL usually want it compiled-in so it is available early in boot, make CPU_THERMAL depend on THERMAL being compiled-in instead of allowing it to be a module. As a result of this change, get rid of the ugly (!CPU_THERMAL || THERMAL) dependency in all cpufreq drivers using CPU_THERMAL. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-23Merge branch 'for-rc' of ↵Linus Torvalds1-14/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: - Fix a race condition that sysfs could be accessed before necessary initialization in int340x thermal driver. (Aaron Hill) - Fix a NULL vs IS_ERR() check in int340x thermal driver. (Dan Carpenter) * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: drivers: thermal: int340x_thermal: Fix sysfs race condition thermal: int340x_thermal: Fix a NULL vs IS_ERR() check
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-11 17:15:16 +0000