Age | Commit message (Collapse) | Author | Files | Lines |
|
If device_register() returns error in optee_register_device(),
the name allocated by dev_set_name() need be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup(),
and optee_device is freed in optee_release_device().
Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
|
|
Use the VMA iterator instead. Change the calling convention of
__check_mem_type() to pass in the mm instead of the first vma in the
range.
Link: https://lkml.kernel.org/r/20220906194824.2110408-39-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
Arm FF-A firmware driver updates for v6.1
Small set of changes in preparation to add support for FF-A v1.1
specification later. It mainly contains:
1. Splitting up ffa_ops into different categories namely information,
message and memory. It helps to make info and memory operations
independent from ffa_device so thata generic memory management
module can use it without specific ffa_dev.
2. Adds support for querying FF-A features and use the same to detect
the support for 64-bit operations.
3. Adds v1.1 get_partition_info support and use the same to set up
32-bit execution mode flag automatically.
4. Adds pointer to the ffa_dev_ops in struct ffa_dev and drop
ffa_dev_ops_get() which enables to drop ffa_ops in optee_ffa
structure using ffa_dev->ops directly. Additionally ffa_dev_ops is
renamed as ffa_ops.
* tag 'ffa-updates-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Split up ffa_ops into info, message and memory operations
firmware: arm_ffa: Set up 32bit execution mode flag using partiion property
firmware: arm_ffa: Add v1.1 get_partition_info support
firmware: arm_ffa: Rename ffa_dev_ops as ffa_ops
firmware: arm_ffa: Make memory apis ffa_device independent
firmware: arm_ffa: Use FFA_FEATURES to detect if native versions are supported
firmware: arm_ffa: Add support for querying FF-A features
firmware: arm_ffa: Remove ffa_dev_ops_get()
tee: optee: Drop ffa_ops in optee_ffa structure using ffa_dev->ops directly
firmware: arm_ffa: Add pointer to the ffa_dev_ops in struct ffa_dev
Link: https://lore.kernel.org/r/20220913100612.2924643-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In preparation to make memory operations accessible for a non
ffa_driver/device, it is better to split the ffa_ops into different
categories of operations: info, message and memory. The info and memory
are ffa_device independent and can be used without any associated
ffa_device from a non ffa_driver.
However, we don't export these info and memory APIs yet without the user.
The first users of these APIs can export them.
Link: https://lore.kernel.org/r/20220907145240.1683088-11-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Except the message APIs, all other APIs are ffa_device independent and can
be used without any associated ffa_device from a non ffa_driver.
In order to reflect the same, just rename ffa_dev_ops as ffa_ops to
avoid any confusion or to keep it simple.
Link: https://lore.kernel.org/r/20220907145240.1683088-8-sudeep.holla@arm.com
Suggested-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
There is a requirement to make memory APIs independent of the ffa_device.
One of the use-case is to have a common memory driver that manages the
memory for all the ffa_devices. That common memory driver won't be a
ffa_driver or won't have any ffa_device associated with it. So having
these memory APIs accessible without a ffa_device is needed and should
be possible as most of these are handled by the partition manager(SPM
or hypervisor).
Drop the ffa_device argument to the memory APIs and make them ffa_device
independent.
Link: https://lore.kernel.org/r/20220907145240.1683088-7-sudeep.holla@arm.com
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Now that the ffa_device structure holds the pointer to ffa_dev_ops,
there is no need to obtain the same through ffa_dev_ops_get().
Just use the ffa_dev->ops directly. Since the ffa_device itself carries
ffa_dev_ops now, there is no need to keep a copy in optee_ffa structure.
Drop ffa_ops in the optee_ffa structure as it is not needed anymore.
Link: https://lore.kernel.org/r/20220907145240.1683088-3-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Include <linux/uaccess.h> to avoid the warning:
drivers/tee/tee_shm.c: In function 'tee_shm_register':
>> drivers/tee/tee_shm.c:242:14: error: implicit declaration of function 'access_ok' [-Werror=implicit-function-declaration]
242 | if (!access_ok((void __user *)addr, length))
| ^~~~~~~~~
cc1: some warnings being treated as errors
Fixes: 573ae4f13f63 ("tee: add overflow check in register_shm_helper()")
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
With special lengths supplied by user space, register_shm_helper() has
an integer overflow when calculating the number of pages covered by a
supplied user space memory region.
This causes internal_get_user_pages_fast() a helper function of
pin_user_pages_fast() to do a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
Modules linked in:
CPU: 1 PID: 173 Comm: optee_example_a Not tainted 5.19.0 #11
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
pc : internal_get_user_pages_fast+0x474/0xa80
Call trace:
internal_get_user_pages_fast+0x474/0xa80
pin_user_pages_fast+0x24/0x4c
register_shm_helper+0x194/0x330
tee_shm_register_user_buf+0x78/0x120
tee_ioctl+0xd0/0x11a0
__arm64_sys_ioctl+0xa8/0xec
invoke_syscall+0x48/0x114
Fix this by adding an an explicit call to access_ok() in
tee_shm_register_user_buf() to catch an invalid user space address
early.
Fixes: 033ddf12bcf5 ("tee: add register user memory")
Cc: stable@vger.kernel.org
Reported-by: Nimish Mishra <neelam.nimish@gmail.com>
Reported-by: Anirban Chakraborty <ch.anirban00727@gmail.com>
Reported-by: Debdeep Mukhopadhyay <debdeep.mukhopadhyay@gmail.com>
Suggested-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch fixes the description of tee_get_drvdata()'s return value.
It actually returns the driver_data pointer supplied to
tee_device_alloc() since the TEE subsystem was added to the kernel.
Fixes: 967c9cca2cc5 ("tee: generic TEE subsystem")
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
file: ./drivers/tee/optee/optee_smc.h
line: 192
* a2 Size of of SHM
chanegd to
* a2 Size of SHM
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
In optee_smc_do_call_with_arg() there is a code path when the argument
struct for RPC is passed appended to the primary argument struct. When
the address of the RPC struct is retrieved there's an invalid check for
success. It should be 'rpc_arg' pass to IS_ERR/PTR_ERR().
Fixes: ed8faf6c8f8c ("optee: add OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[jw: added background to the problem]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/late
Fix a compiler warning in OP-TEE driver
* tag 'optee-warning-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: Pass a pointer to virt_addr_valid()
Link: https://lore.kernel.org/r/20220530112612.GA1511426@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A pointer into virtual memory is represented by a (void *)
not an u32, so the compiler warns:
drivers/tee/optee/call.c:365:29: warning: passing argument 1
of 'virt_to_pfn' makes pointer from integer without a
cast [-Wint-conversion]
Fix this with an explicit cast.
Cc: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
[jw: fixed merge conflict]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
TEE cleanup
Removes the old and unused TEE_IOCTL_SHM_* flags
Removes unused the unused tee_shm_va2pa() and tee_shm_pa2va() functions
* tag 'tee-cleanup-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: remove flags TEE_IOCTL_SHM_MAPPED and TEE_IOCTL_SHM_DMA_BUF
tee: remove tee_shm_va2pa() and tee_shm_pa2va()
Link: https://lore.kernel.org/r/20220506070328.GA1344495@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
OP-TEE RPC argument cache
Adds caching of the OP-TEE argument structure used to pass request to
secure world. This reduces quite a bit of unnecessary alloc/free and
possibly switching back and forth to secure work in order to register
the buffers in some configurations, most notably FF-A.
* tag 'optee-rpc-arg-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: cache argument shared memory structs
optee: add FF-A capability OPTEE_FFA_SEC_CAP_ARG_OFFSET
optee: add OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG
optee: rename rpc_arg_count to rpc_param_count
Link: https://lore.kernel.org/r/20220504201759.GA180315@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
Arm FF-A firmware driver updates/fixes for v5.19
Couple of fixes to handle fragmented memory descriptors and incorrect
UUID parameter passed to ffa_partition_probe. Another fix deals with
the incorrect use of ffa_device's driver_data by the core driver.
Apart from these fixes, there is an addition of ffa_dev_get_drvdata helper
function and its use in optee driver.
* tag 'ffa-updates-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
tee: optee: Use ffa_dev_get_drvdata to fetch driver_data
firmware: arm_ffa: Add ffa_dev_get_drvdata helper function
firmware: arm_ffa: Remove incorrect assignment of driver_data
firmware: arm_ffa: Fix uuid parameter to ffa_partition_probe
firmware: arm_ffa: Fix handling of fragmented memory descriptors
Link: https://lore.kernel.org/r/20220504112853.3491961-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
TEE accept vmalloc()ed buffers for tee_shm_register_kernel_buf()
* tag 'tee-shm-vmalloc-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: make tee_shm_register_kernel_buf vmalloc supported
Link: https://lore.kernel.org/r/20220503192916.GA3288817@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Due to lack of an helper like ffa_dev_get_drvdata, this driver was
fetching driver_data directly accessing the structure member. Now that
we have added an helper, just use the same instead.
Link: https://lore.kernel.org/r/20220429113946.2087145-4-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
These look to be leftover from an early edition of this driver. Userspace
does not need this information. Checking all users of this that I have
access to I have verified no one is using them.
They leak internal use flags out to userspace. Even more they are not
correct anymore after a45ea4efa358. Lets drop these flags before
someone does try to use them for something and they become ABI.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
We should not need to index into SHMs based on absolute VA/PA.
These functions are not used and this kind of usage should not be
encouraged anyway. Remove these functions.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Implements a cache to handle shared memory used to pass the argument
struct needed when doing a normal yielding call into secure world.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds the secure capability OPTEE_FFA_SEC_CAP_ARG_OFFSET to indicate that
OP-TEE with FF-A can support an argument struct at a non-zero offset into
a passed shared memory object.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG where
the struct optee_msg_arg to be used for RPC is appended in the memory
following the normal argument struct optee_msg_arg. This is an
optimization to avoid caching the RPC argument struct while still
maintaining similar performance as if it was cached.
OPTEE_SMC_CALL_WITH_REGD_ARG optimized one step further by using a
registered shared memory object instead. It's in other aspects identical
to OPTEE_SMC_CALL_WITH_RPC_ARG.
The presence of OPTEE_SMC_CALL_WITH_RPC_ARG and
OPTEE_SMC_CALL_WITH_REGD_ARG is indicated by the new
OPTEE_SMC_SEC_CAP_RPC_ARG bit returned by
OPTEE_SMC_EXCHANGE_CAPABILITIES. OPTEE_SMC_EXCHANGE_CAPABILITIES also
reports the number of arguments that the RPC argument struct must have
room for.
OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_ARG can be used
interleaved with difference that when OPTEE_SMC_CALL_WITH_RPC_ARG is
used the RPC argument struct to be used is the one appended to the
normal argument struct. The same is true for
OPTEE_SMC_CALL_WITH_REGD_ARG.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Renames the field rpc_arg_count in struct optee to rpc_param_count.
Function parameter names and local variables are also renamed to match.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The error handling code of optee_ffa_probe misses the mutex_destroy of
ffa.mutex when mutext_init succeeds.
Fix this by adding mutex_destory of ffa.mutex at the error handling part
Fixes: aceeafefff73 ("optee: use driver internal tee_context for some rpc")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
In some low-memory devices, it's hard to aquire large-orders pages,
this patch allowed user using scatter pages to register shm.
Signed-off-by: Phil Chang <phil.chang@mediatek.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Don't let TEE occupy two lines in menuconfig when practically no
other (sub)menu does either.
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
|
|
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
TEE shared memory cleanup for v5.18
- The TEE shared memory pool based on two pools is replaced with a single
somewhat more capable pool.
- Replaces tee_shm_alloc() and tee_shm_register() with new functions
easier to use and maintain. The TEE subsystem and the TEE drivers are
updated to use the new functions instead.
- The TEE based Trusted keys routines are updated to use the new
simplified functions above.
- The OP-TEE based rng driver is updated to use the new simplified
functions above.
- The TEE_SHM-flags are refactored to better match their usage
* tag 'tee-shm-for-v5.18' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: refactor TEE_SHM_* flags
tee: replace tee_shm_register()
KEYS: trusted: tee: use tee_shm_register_kernel_buf()
tee: add tee_shm_register_{user,kernel}_buf()
optee: add optee_pool_op_free_helper()
tee: replace tee_shm_alloc()
tee: simplify shm pool handling
tee: add tee_shm_alloc_user_buf()
tee: remove unused tee_shm_pool_alloc_res_mem()
hwrng: optee-rng: use tee_shm_alloc_kernel_buf()
optee: use driver internal tee_context for some rpc
Link: https://lore.kernel.org/r/20220218184802.GA968155@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
OP-TEE fix error return code in probe functions
* tag 'optee-fix2-for-v5.17' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: fix error return code in probe function
Link: https://lore.kernel.org/r/20220214125931.GA1332792@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Removes the redundant TEE_SHM_DMA_BUF, TEE_SHM_EXT_DMA_BUF,
TEE_SHM_MAPPED and TEE_SHM_KERNEL_MAPPED flags.
TEE_SHM_REGISTER is renamed to TEE_SHM_DYNAMIC in order to better
match its usage.
Assigns new values to the remaining flags to void gaps.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
tee_shm_register() is replaced by the previously introduced functions
tee_shm_register_user_buf() and tee_shm_register_kernel_buf().
Since there are not external callers left we can remove tee_shm_register()
and refactor the remains.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds the two new functions tee_shm_register_user_buf() and
tee_shm_register_kernel_buf() which should be used instead of the old
tee_shm_register().
This avoids having the caller supplying the flags parameter which
exposes a bit more than desired of the internals of the TEE subsystem.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds a common helper function to free a tee_shm allocated using the
helper function optee_pool_op_alloc_helper().
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
tee_shm_alloc() is replaced by three new functions,
tee_shm_alloc_user_buf() - for user mode allocations, replacing passing
the flags TEE_SHM_MAPPED | TEE_SHM_DMA_BUF
tee_shm_alloc_kernel_buf() - for kernel mode allocations, slightly
optimized compared to using the flags TEE_SHM_MAPPED | TEE_SHM_DMA_BUF.
tee_shm_alloc_priv_buf() - primarily for TEE driver internal use.
This also makes the interface easier to use as we can get rid of the
somewhat hard to use flags parameter.
The TEE subsystem and the TEE drivers are updated to use the new
functions instead.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Replaces the shared memory pool based on two pools with a single pool.
The alloc() function pointer in struct tee_shm_pool_ops gets another
parameter, align. This makes it possible to make less than page aligned
allocations from the optional reserved shared memory pool while still
making user space allocations page aligned. With in practice unchanged
behaviour using only a single pool for bookkeeping.
The allocation algorithm in the static OP-TEE shared memory pool is
changed from best-fit to first-fit since only the latter supports an
alignment parameter. The best-fit algorithm was previously the default
choice and not a conscious one.
The optee and amdtee drivers are updated as needed to work with this
changed pool handling.
This also removes OPTEE_SHM_NUM_PRIV_PAGES which becomes obsolete with
this change as the private pages can be mixed with the payload pages.
The OP-TEE driver changes minimum alignment for argument struct from 8
bytes to 512 bytes. A typical OP-TEE private shm allocation is 224 bytes
(argument struct with 6 parameters, needed for open session). So with an
alignment of 512 well waste a bit more than 50%. Before this we had a
single page reserved for this so worst case usage compared to that would
be 3 pages instead of 1 page. However, this worst case only occurs if
there is a high pressure from multiple threads on secure world. All in
all this should scale up and down better than fixed boundaries.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds a new function tee_shm_alloc_user_buf() for user mode allocations,
replacing passing the flags TEE_SHM_MAPPED | TEE_SHM_DMA_BUF to
tee_shm_alloc().
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
None of the drivers in the TEE subsystem uses
tee_shm_pool_alloc_res_mem() so remove the function.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
If teedev_open() fails, probe function need return
error code.
Fixes: aceeafefff73 ("optee: use driver internal tee_context for some rpc")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Replace "struct list_head head = LIST_HEAD_INIT(head)" with
"LIST_HEAD(head)" to simplify the code.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
OP-TE fixes for v5.17
- Adds error checking in optee_ffa_do_call_with_arg()
- Reintroduces an accidentally lost fix for a memref size check
- Uses bitmap_free() to free memory obtained with bitmap_zalloc()
* tag 'optee-fixes-for-v5.17' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: add error checks in optee_ffa_do_call_with_arg()
tee: optee: do not check memref size on return from Secure World
optee: Use bitmap_free() to free bitmap
Link: https://lore.kernel.org/r/20220126102609.GA1516258@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Adds a driver private tee_context by moving the tee_context in struct
optee_notif to struct optee. This tee_context was previously used when
doing internal calls to secure world to deliver notification.
The new driver internal tee_context is now also when allocating driver
private shared memory. This decouples the shared memory object from its
original tee_context. This is needed when the life time of such a memory
allocation outlives the client tee_context.
This patch fixes the problem described below:
The addition of a shutdown hook by commit f25889f93184 ("optee: fix tee out
of memory failure seen during kexec reboot") introduced a kernel shutdown
regression that can be triggered after running the OP-TEE xtest suites.
Once the shutdown hook is called it is not possible to communicate any more
with the supplicant process because the system is not scheduling task any
longer. Thus if the optee driver shutdown path receives a supplicant RPC
request from the OP-TEE we will deadlock the kernel's shutdown.
Fixes: f25889f93184 ("optee: fix tee out of memory failure seen during kexec reboot")
Fixes: 217e0250cccb ("tee: use reference counting for tee_context")
Reported-by: Lars Persson <larper@axis.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds error checking in optee_ffa_do_call_with_arg() for correctness.
Fixes: 4615e5a34b95 ("optee: add FF-A support")
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Commit c650b8dc7a79 ("tee: optee: do not check memref size on return
from Secure World") was mistakenly lost in commit 4602c5842f64 ("optee:
refactor driver with internal callbacks"). Remove the unwanted code
again.
Fixes: 4602c5842f64 ("optee: refactor driver with internal callbacks")
Signed-off-by: Jerome Forissier <jerome@forissier.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
kfree() and bitmap_free() are the same. But using the latter is more
consistent when freeing memory allocated with bitmap_zalloc().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
well as a new USIv2 driver that handles various types of serial
communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
as well as memory controller support for RZ/G2L (R9A07G044).
- Apple M1 gains support for the PMGR power management driver"
* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
|