summaryrefslogtreecommitdiffstats
path: root/drivers/tee/optee
AgeCommit message (Collapse)AuthorFilesLines
2021-02-09Merge tag 'optee-simplify-i2c-access_for-v5.12' of ↵Arnd Bergmann1-15/+16
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers Simplify i2c acess in OP-TEE driver * tag 'optee-simplify-i2c-access_for-v5.12' of git://git.linaro.org/people/jens.wiklander/linux-tee: optee: simplify i2c access Link: https://lore.kernel.org/soc/20210208125853.GA288348%40jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-08optee: simplify i2c accessArnd Bergmann1-15/+16
Storing a bogus i2c_client structure on the stack adds overhead and causes a compile-time warning: drivers/tee/optee/rpc.c:493:6: error: stack frame size of 1056 bytes in function 'optee_handle_rpc' [-Werror,-Wframe-larger-than=] void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param, Change the implementation of handle_rpc_func_cmd_i2c_transfer() to open-code the i2c_transfer() call, which makes it easier to read and avoids the warning. Fixes: c05210ab9757 ("drivers: optee: allow op-tee to access devices on the i2c bus") Tested-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-02-03Merge tag 'optee-fix-cond-resched-call-for-v5.12' of ↵Arnd Bergmann1-1/+2
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers Remove unnecessary need_resched() before cond_resched() * tag 'optee-fix-cond-resched-call-for-v5.12' of git://git.linaro.org:/people/jens.wiklander/linux-tee: tee: optee: remove need_resched() before cond_resched() tee: optee: replace might_sleep with cond_resched Link: https://lore.kernel.org/r/20210203120953.GB3624453@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-03tee: optee: remove need_resched() before cond_resched()Jens Wiklander1-2/+1
Testing need_resched() before cond_resched() is not needed as an equivalent test is done internally in cond_resched(). So drop the need_resched() test. Fixes: dcb3b06d9c34 ("tee: optee: replace might_sleep with cond_resched") Reviewed-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Tested-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Tested-by: Sumit Garg <sumit.garg@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-02-02optee: sync OP-TEE headersJens Wiklander4-189/+179
Pulls in updates in the internal headers from OP-TEE OS [1]. A few defines has been shortened, hence the changes in rpc.c. Defines not used by the driver in tee_rpc_cmd.h has been filtered out. Note that this does not change the ABI. Link: [1] https://github.com/OP-TEE/optee_os Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-02-02tee: optee: fix 'physical' typosBjorn Helgaas1-1/+1
Fix misspellings of "physical". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-02-02drivers: optee: use flexible-array member instead of zero-length arrayTian Tao1-1/+1
Use flexible-array member introduced in C99 instead of zero-length array. Most of zero-length array was already taken care in previous patch [1]. Now modified few more cases which were not handled earlier. [1]. https://patchwork.kernel.org/patch/11394197/ Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-21tee: optee: replace might_sleep with cond_reschedRouven Czerwinski1-1/+3
might_sleep() is a debugging aid and triggers rescheduling only for certain kernel configurations. Replace with an explicit check and reschedule to work for all kernel configurations. Fixes the following trace: [ 572.945146] rcu: INFO: rcu_sched self-detected stall on CPU [ 572.949275] rcu: 0-....: (2099 ticks this GP) idle=572/1/0x40000002 softirq=7412/7412 fqs=974 [ 572.957964] (t=2100 jiffies g=10393 q=21) [ 572.962054] NMI backtrace for cpu 0 [ 572.965540] CPU: 0 PID: 165 Comm: xtest Not tainted 5.8.7 #1 [ 572.971188] Hardware name: STM32 (Device Tree Support) [ 572.976354] [<c011163c>] (unwind_backtrace) from [<c010b7f8>] (show_stack+0x10/0x14) [ 572.984080] [<c010b7f8>] (show_stack) from [<c0511e4c>] (dump_stack+0xc4/0xd8) [ 572.991300] [<c0511e4c>] (dump_stack) from [<c0519abc>] (nmi_cpu_backtrace+0x90/0xc4) [ 572.999130] [<c0519abc>] (nmi_cpu_backtrace) from [<c0519bdc>] (nmi_trigger_cpumask_backtrace+0xec/0x130) [ 573.008706] [<c0519bdc>] (nmi_trigger_cpumask_backtrace) from [<c01a5184>] (rcu_dump_cpu_stacks+0xe8/0x110) [ 573.018453] [<c01a5184>] (rcu_dump_cpu_stacks) from [<c01a4234>] (rcu_sched_clock_irq+0x7fc/0xa88) [ 573.027416] [<c01a4234>] (rcu_sched_clock_irq) from [<c01acdd0>] (update_process_times+0x30/0x8c) [ 573.036291] [<c01acdd0>] (update_process_times) from [<c01bfb90>] (tick_sched_timer+0x4c/0xa8) [ 573.044905] [<c01bfb90>] (tick_sched_timer) from [<c01adcc8>] (__hrtimer_run_queues+0x174/0x358) [ 573.053696] [<c01adcc8>] (__hrtimer_run_queues) from [<c01aea2c>] (hrtimer_interrupt+0x118/0x2bc) [ 573.062573] [<c01aea2c>] (hrtimer_interrupt) from [<c09ad664>] (arch_timer_handler_virt+0x28/0x30) [ 573.071536] [<c09ad664>] (arch_timer_handler_virt) from [<c0190f50>] (handle_percpu_devid_irq+0x8c/0x240) [ 573.081109] [<c0190f50>] (handle_percpu_devid_irq) from [<c018ab8c>] (generic_handle_irq+0x34/0x44) [ 573.090156] [<c018ab8c>] (generic_handle_irq) from [<c018b194>] (__handle_domain_irq+0x5c/0xb0) [ 573.098857] [<c018b194>] (__handle_domain_irq) from [<c052ac50>] (gic_handle_irq+0x4c/0x90) [ 573.107209] [<c052ac50>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x90) [ 573.114682] Exception stack(0xd90dfcf8 to 0xd90dfd40) [ 573.119732] fce0: ffff0004 00000000 [ 573.127917] fd00: 00000000 00000000 00000000 00000000 00000000 00000000 d93493cc ffff0000 [ 573.136098] fd20: d2bc39c0 be926998 d90dfd58 d90dfd48 c09f3384 c01151f0 400d0013 ffffffff [ 573.144281] [<c0100b0c>] (__irq_svc) from [<c01151f0>] (__arm_smccc_smc+0x10/0x20) [ 573.151854] [<c01151f0>] (__arm_smccc_smc) from [<c09f3384>] (optee_smccc_smc+0x3c/0x44) [ 573.159948] [<c09f3384>] (optee_smccc_smc) from [<c09f4170>] (optee_do_call_with_arg+0xb8/0x154) [ 573.168735] [<c09f4170>] (optee_do_call_with_arg) from [<c09f4638>] (optee_invoke_func+0x110/0x190) [ 573.177786] [<c09f4638>] (optee_invoke_func) from [<c09f1ebc>] (tee_ioctl+0x10b8/0x11c0) [ 573.185879] [<c09f1ebc>] (tee_ioctl) from [<c029f62c>] (ksys_ioctl+0xe0/0xa4c) [ 573.193101] [<c029f62c>] (ksys_ioctl) from [<c0100060>] (ret_fast_syscall+0x0/0x54) [ 573.200750] Exception stack(0xd90dffa8 to 0xd90dfff0) [ 573.205803] ffa0: be926bf4 be926a78 00000003 8010a403 be926908 004e3cf8 [ 573.213987] ffc0: be926bf4 be926a78 00000000 00000036 be926908 be926918 be9269b0 bffdf0f8 [ 573.222162] ffe0: b6d76fb0 be9268fc b6d66621 b6c7e0d8 seen on STM32 DK2 with CONFIG_PREEMPT_NONE. Fixes: 9f02b8f61f29 ("tee: optee: add might_sleep for RPC requests") Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Tested-by: Sumit Garg <sumit.garg@linaro.org> [jw: added fixes tag + small adjustments in the code] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-12-16Merge tag 'arm-soc-drivers-5.11' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
2020-11-25optee: add writeback to valid memory typeRui Miguel Silva1-1/+2
Only in smp systems the cache policy is setup as write alloc, in single cpu systems the cache policy is set as writeback and it is normal memory, so, it should pass the is_normal_memory check in the share memory registration. Add the right condition to make it work in no smp systems. Fixes: cdbcf83d29c1 ("tee: optee: check type of registered shared memory") Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-10-26Merge tag 'optee-use-uuid-api-for-v5.10' of ↵Arnd Bergmann1-1/+1
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers Use UUID API to export the UUID Uses export_uuid() to export and uuid_t to an u8 array instead of depending on the internals of uuid_t. * tag 'optee-use-uuid-api-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee: tee: optee: Use UUID API for exporting the UUID Link: https://lore.kernel.org/r/20201013063612.GA3325842@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-13tee: optee: Use UUID API for exporting the UUIDAndy Shevchenko1-1/+1
There is export_uuid() function which exports uuid_t to the u8 array. Use it instead of open coding variant. This allows to hide the uuid_t internals. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-09-13Merge tag 'optee-i2c-fix-for-v5.10' of ↵Olof Johansson1-1/+1
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers Make sure I2C functions used in OP-TEE are reachable with IS_REACHABLE() * tag 'optee-i2c-fix-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee: drivers: optee: fix i2c build issue Link: https://lore.kernel.org/r/20200901101806.GA3286324@jade Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-01drivers: optee: fix i2c build issueJorge Ramirez-Ortiz1-1/+1
When the optee driver is compiled into the kernel while the i2c core is configured as a module, the i2c symbols are not available. This commit addresses the situation by disabling the i2c support for this use case while allowing it in all other scenarios: i2c=y, optee=y i2c=m, optee=m i2c=y, optee=m i2c=m, optee=y (not supported) Fixes: c05210ab9757 ("drivers: optee: allow op-tee to access devices on the i2c bus") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-08-21Merge tag 'tee-memref-null-for-v5.10' of ↵Olof Johansson2-0/+10
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers Handle NULL pointer indication from tee client Adds support to indicate NULL pointers instead of a valid buffer when querying the needed size of a buffer. * tag 'tee-memref-null-for-v5.10' of git://git.linaro.org/people/jens.wiklander/linux-tee: driver: tee: Handle NULL pointer indication from client Link: https://lore.kernel.org/r/20200821102535.GA1872111@jade Signed-off-by: Olof Johansson <olof@lixom.net>
2020-08-21drivers: optee: allow op-tee to access devices on the i2c busJorge Ramirez-Ortiz3-0/+117
Some secure elements like NXP's SE050 sit on I2C buses. For OP-TEE to control this type of cryptographic devices it needs coordinated access to the bus, so collisions and RUNTIME_PM dont get in the way. This trampoline driver allow OP-TEE to access them. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-08-21driver: tee: Handle NULL pointer indication from clientCedric Neveux2-0/+10
TEE Client introduce a new capability "TEE_GEN_CAP_MEMREF_NULL" to handle the support of the shared memory buffer with a NULL pointer. This capability depends on TEE Capabilities and driver support. Driver and TEE exchange capabilities at driver initialization. Signed-off-by: Michael Whitfield <michael.whitfield@nxp.com> Signed-off-by: Cedric Neveux <cedric.neveux@nxp.com> Reviewed-by: Joakim Bech <joakim.bech@linaro.org> Tested-by: Joakim Bech <joakim.bech@linaro.org> (QEMU) Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-07-13Merge tag 'optee-bus-for-v5.9' of ↵Arnd Bergmann3-25/+50
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers Enable multi-stage OP-TEE bus enumeration Probes drivers on the OP-TEE bus in two steps. First for drivers which do not depend on tee-supplicant. After tee-supplicant has been started probe the devices which do depend on tee-supplicant. Also introduces driver which uses an OP-TEE based fTPM Trusted Application depends on tee-supplicant NV RAM implementation based on RPMB secure storage. * tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee: tpm_ftpm_tee: register driver on TEE bus optee: enable support for multi-stage bus enumeration optee: use uuid for sysfs driver entry Link: https://lore.kernel.org/r/20200710085230.GA1312913@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-10optee: enable support for multi-stage bus enumerationMaxim Uvarov3-22/+44
Some drivers (like ftpm) can operate only after tee-supplicant runs because of tee-supplicant provides things like storage services (rpmb, shm).  This patch splits probe of non tee-supplicant dependable drivers to the early stage, and after tee-supplicant run probe other drivers. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Suggested-by: Sumit Garg <sumit.garg@linaro.org> Suggested-by: Arnd Bergmann <arnd@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-07-10optee: use uuid for sysfs driver entryMaxim Uvarov1-3/+6
With the evolving use-cases for TEE bus, now it's required to support multi-stage enumeration process. But using a simple index doesn't suffice this requirement and instead leads to duplicate sysfs entries. So instead switch to use more informative device UUID for sysfs entry like: /sys/bus/tee/devices/optee-ta-<uuid> Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse1-2/+2
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-11tee: optee: Add support for session login client UUID generationVesa Jääskeläinen1-1/+5
Adds support for client UUID generation for OP-TEE. For group based session logins membership is verified. Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-02-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-89/+64
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-01-24Merge tag 'tee-optee-fix2-for-5.5' of ↵Olof Johansson1-0/+1
https://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes Fix OP-TEE compile error with nommu * tag 'tee-optee-fix2-for-5.5' of https://git.linaro.org:/people/jens.wiklander/linux-tee: tee: optee: Fix compilation issue with nommu Link: https://lore.kernel.org/r/20200123101310.GA10320@jax Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-23tee: optee: Fix compilation issue with nommuVincenzo Frascino1-0/+1
The optee driver uses specific page table types to verify if a memory region is normal. These types are not defined in nommu systems. Trying to compile the driver in these systems results in a build error: linux/drivers/tee/optee/call.c: In function ‘is_normal_memory’: linux/drivers/tee/optee/call.c:533:26: error: ‘L_PTE_MT_MASK’ undeclared (first use in this function); did you mean ‘PREEMPT_MASK’? return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~ PREEMPT_MASK linux/drivers/tee/optee/call.c:533:26: note: each undeclared identifier is reported only once for each function it appears in linux/drivers/tee/optee/call.c:533:44: error: ‘L_PTE_MT_WRITEALLOC’ undeclared (first use in this function) return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~~~~~~~ Make the optee driver depend on MMU to fix the compilation issue. Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> [jw: update commit title] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-01-03optee: Fix multi page dynamic shm pool allocSumit Garg1-1/+14
optee_shm_register() expected pages to be passed as an array of page pointers rather than as an array of contiguous pages. So fix that via correctly passing pages as per expectation. Fixes: a249dd200d03 ("tee: optee: Fix dynamic shm pool allocations") Reported-by: Vincent Cao <vincent.t.cao@intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Vincent Cao <vincent.t.cao@intel.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-01-03optee: model OP-TEE as a platform device/driverArd Biesheuvel1-89/+64
To simplify adding ACPI support to the OP-TEE driver, model it as a platform driver. This will permit us to use the generic device property layer for parsing additional properties, regardless of whether DT or ACPI is being used. Note that this change will result in the OP-TEE driver to be loaded automatically on systems that advertise the presence of OP-TEE via the device tree. Acked-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-11-15tee: optee: fix device enumeration error handlingJens Wiklander1-8/+12
Prior to this patch in optee_probe() when optee_enumerate_devices() was called the struct optee was fully initialized. If optee_enumerate_devices() returns an error optee_probe() is supposed to clean up and free the struct optee completely, but will at this late stage need to call optee_remove() instead. This isn't done and thus freeing the struct optee prematurely. With this patch the call to optee_enumerate_devices() is done after optee_probe() has returned successfully and in case optee_enumerate_devices() fails everything is cleaned up with a call to optee_remove(). Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-11-15tee: optee: Fix dynamic shm pool allocationsSumit Garg2-1/+18
In case of dynamic shared memory pool, kernel memory allocated using dmabuf_mgr pool needs to be registered with OP-TEE prior to its usage during optee_open_session() or optee_invoke_func(). So fix dmabuf_mgr pool allocations via an additional call to optee_shm_register(). Also, allow kernel pages to be registered as shared memory with OP-TEE. Fixes: 9733b072a12a ("optee: allow to work without static shared memory") Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-07-08tee: optee: add might_sleep for RPC requestsRouven Czerwinski1-0/+1
If the kernel is compiled with CONFIG_PREEMPT_VOLUNTARY and OP-TEE is executing a long running workload, the following errors are raised: [ 1705.971228] rcu: INFO: rcu_sched detected stalls on CPUs/tasks: [ 1705.977195] rcu: (detected by 0, t=2102 jiffies, g=51977, q=3) [ 1705.983152] rcu: All QSes seen, last rcu_sched kthread activity 2102 (140596-138494), jiffies_till_next_fqs=1, root ->qsmask 0x0 [ 1705.994729] optee-xtest R running task 0 169 157 0x00000002 While OP-TEE is returning regularly to the kernel due to timer interrupts, the OPTEE_SMC_FUNC_FOREIGN_INTR case does not contain an explicit rescheduling point. Add a might_sleep() to the RPC request case to ensure that the kernel can reschedule another task if OP-TEE requests RPC handling. Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner7-70/+7
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-28Merge tag 'tee-optee-for-5.2' of ↵Olof Johansson1-31/+49
http://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers Allow OP-TEE driver to work without static shared memory * tag 'tee-optee-for-5.2' of http://git.linaro.org:/people/jens.wiklander/linux-tee: optee: allow to work without static shared memory Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-17optee: allow to work without static shared memoryVolodymyr Babchuk1-31/+49
On virtualized systems it is possible that OP-TEE will provide only dynamic shared memory support. So it is fine to boot without static SHM enabled if dymanic one is supported. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-03-06Merge tag 'armsoc-drivers' of ↵Linus Torvalds7-49/+181
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits) tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface dpaa2-eth: configure the cache stashing amount on a queue soc: fsl: dpio: configure cache stashing destination soc: fsl: dpio: enable frame data cache stashing per software portal soc: fsl: guts: make fsl_guts_get_svr() static hwrng: make symbol 'optee_rng_id_table' static tee: optee: Fix unsigned comparison with less than zero hwrng: Fix unsigned comparison with less than zero tee: fix possible error pointer ctx dereferencing hwrng: optee: Initialize some structs using memset instead of braces tee: optee: Initialize some structs using memset instead of braces soc: fsl: dpio: fix memory leak of a struct qbman on error exit path clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static soc: qcom: llcc-slice: Fix typos qcom: soc: llcc-slice: Consolidate some code qcom: soc: llcc-slice: Clear the global drv_data pointer on error drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings ...
2019-03-01Merge tag 'tee-misc-for-v5.1' of ↵Arnd Bergmann2-48/+4
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers OP-TEE driver - dual license for optee_msg.h and optee_smc.h Generic - add cancellation support to client interface * tag 'tee-misc-for-v5.1' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-28tee: optee: update optee_msg.h and optee_smc.h to dual licenseJerome Forissier2-48/+4
The files optee_msg.h and optee_smc.h (under drivers/tee/optee) contain information originating from the OP-TEE OS project [1] [2], where the licensing terms are BSD 2-Clause. Therefore, apply a dual license to those files. Link: [1] https://github.com/OP-TEE/optee_os/blob/master/core/include/optee_msg.h Link: [2] https://github.com/OP-TEE/optee_os/blob/master/core/arch/arm/include/sm/optee_smc.h Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-28tee: optee: add missing of_node_put after of_device_is_availableJulia Lawall1-1/+3
Add an of_node_put when a tested device node is not available. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ identifier f; local idexpression e; expression x; @@ e = f(...); ... when != of_node_put(e) when != x = e when != e = x when any if (<+...of_device_is_available(e)...+>) { ... when != of_node_put(e) ( return e; | + of_node_put(e); return ...; ) } // </smpl> Fixes: db878f76b9ff ("tee: optee: take DT status property into account") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-20tee: optee: Fix unsigned comparison with less than zeroYueHaibing1-1/+1
The return from the call to tee_client_invoke_func can be a negative error code however this is being assigned to an unsigned variable 'ret' hence the check is always false. Fix this by making 'ret' an int. Detected by Coccinelle ("Unsigned expression compared with zero: ret < 0") Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-20tee: optee: Initialize some structs using memset instead of bracesNathan Chancellor1-3/+8
Clang warns: drivers/tee/optee/device.c:39:31: warning: suggest braces around initialization of subobject [-Wmissing-braces] struct tee_param param[4] = {0}; ^ {} drivers/tee/optee/device.c:92:48: warning: suggest braces around initialization of subobject [-Wmissing-braces] struct tee_ioctl_open_session_arg sess_arg = {0}; ^ {} 2 warnings generated. One way to fix these warnings is to add additional braces like Clang suggests; however, there has been a bit of push back from some maintainers, who just prefer memset as it is unambiguous, doesn't depend on a particular compiler version, and properly initializes all subobjects [1][2]. Do that here so there are no more warnings. [1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/ [2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/ Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Link: https://github.com/ClangBuiltLinux/linux/issues/370 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-01tee: optee: add TEE bus device enumeration supportSumit Garg4-0/+163
OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/ services for TEE bus. So implement device enumeration using invoke function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of device UUIDs. Also register these enumerated devices with TEE bus as "optee-clntX" device. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> [jw: fix optee_enumerate_devices() with no devices found] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-01tee: add supp_nowait flag in tee_context structSumit Garg1-1/+9
This flag indicates that requests in this context should not wait for tee-supplicant daemon to be started if not present and just return with an error code. It is needed for requests which should be non-blocking in nature like ones arising from TEE based kernel drivers or any in kernel api that uses TEE internal client interface. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-12-31Merge tag 'tee-subsys-optee-for-4.21' of ↵Olof Johansson1-0/+3
https://git.linaro.org/people/jens.wiklander/linux-tee into next/late OP-TEE dynamic shm log message Adds a log message in the OP-TEE driver to inform that dynamic shared memory is enabled. * tag 'tee-subsys-optee-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: log message if dynamic shm is enabled Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-11tee: optee: log message if dynamic shm is enabledVictor Chong1-0/+3
When dynamic shared memory support is enabled in the OP-TEE Trusted OS, it doesn't mean that the driver supports it, which can confuse users during debugging. Log a message when dynamic shared memory is enabled in the driver, to let users know for sure. Suggested-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Victor Chong <victor.chong@linaro.org> Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-12-11tee: optee: avoid possible double list_del()Zhizhou Zhang1-6/+7
This bug occurs when: - a new request arrives, one thread(let's call it A) is pending in optee_supp_req() with req->busy is initial value false. - tee-supplicant is killed, then optee_supp_release() is called, this function calls list_del(&req->link), and set supp->ctx to NULL. And it also wake up process A. - process A continues, it firstly checks supp->ctx which is NULL, then checks req->busy which is false, at last run list_del(&req->link). This triggers double list_del() and results kernel panic. For solve this problem, we rename req->busy to req->in_queue, and associate it with state of whether req is linked to supp->reqs. So we can just only check req->in_queue to make decision calling list_del() or not. Signed-off-by: Zhizhou Zhang <zhizhouzhang@asrmicro.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-08-26Merge tag 'tee-drv-for-4.20' of ↵Olof Johansson1-1/+1
git://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers Misc enhancement for tee driver subsystem * Adds a kernel internal tee client interface allowing other drivers etc to access a TEE * OP-TEE driver takes DT status property into account * tag 'tee-drv-for-4.20' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: add kernel internal client interface tee: optee: take DT status property into account Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-24tee: optee: take DT status property into accountArd Biesheuvel1-1/+1
DT nodes may have a 'status' property which, if set to anything other than 'ok' or 'okay', indicates to the OS that the DT node should be treated as if it was not present. So add that missing logic to the OP-TEE driver. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-06-20tee: optee: making OPTEE_SHM_NUM_PRIV_PAGES configurable via KconfigSahil Malhotra2-1/+9
This change adds KCONFIG option to set number of pages out of whole shared memory to be used for OP-TEE driver private data structures. Signed-off-by: Sahil Malhotra <sahil.malhotra@nxp.com> [jw: fixing trivial merge conflict] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-06-19tee: replace getnstimeofday64() with ktime_get_real_ts64()Arnd Bergmann1-1/+1
The two do the same thing, but we want to have a consistent naming in the kernel. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-03-06tee: optee: report OP-TEE revision informationJérôme Forissier1-0/+23
When the driver initializes, report the following information about the OP-TEE OS: - major and minor version, - build identifier (if available). Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Matthias Brugger <mbruger@suse.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-19 01:19:49 +0000