summaryrefslogtreecommitdiffstats
path: root/drivers/target
AgeCommit message (Collapse)AuthorFilesLines
2021-11-18scsi: target: configfs: Delete unnecessary checks for NULLDan Carpenter1-8/+8
The "item" pointer is always going to be valid pointer and does not need to be checked. But if "item" were NULL then item_to_lun() would not return a NULL, but instead, the container_of() pointer math would return a value in the error pointer range. This confuses static checkers since it looks like a NULL vs IS_ERR() bug. Delete the bogus checks. Link: https://lore.kernel.org/r/20211118084900.GA24550@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-18scsi: target: core: Use RCU helpers for INQUIRY t10_alua_tg_pt_gpMike Christie1-7/+7
Fix the sparse warnings about t10_alua_tg_pt_gp accesses in target_core_spc.c caused by commit 7324f47d4293 ("scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path") That commit replaced the lun_tg_pt_gp_lock use in the I/O path, but it didn't update the INQUIRY code. Link: https://lore.kernel.org/r/20211117213928.8634-1-michael.christie@oracle.com Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-12Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-23/+24
Pull more SCSI updates from James Bottomley: "This series is all the stragglers that didn't quite make the first merge window pull. It's mostly minor updates and bug fixes of merge window code but it also has two driver updates: ufs and qla2xxx" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits) scsi: scsi_debug: Don't call kcalloc() if size arg is zero scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd() scsi: scsi_ioctl: Validate command size scsi: ufs: ufshpb: Properly handle max-single-cmd scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run scsi: bsg: Fix errno when scsi_bsg_register_queue() fails scsi: sr: Remove duplicate assignment scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9 scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks scsi: ufs: ufs-exynos: Factor out priv data init scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops scsi: ufs: ufs-exynos: Add setup_clocks callback scsi: ufs: ufs-exynos: Add refclkout_stop control scsi: ufs: ufs-exynos: Simplify drv_data retrieval scsi: ufs: ufs-exynos: Change pclk available max value scsi: ufs: Add quirk to enable host controller without PH configuration scsi: ufs: Add quirk to handle broken UIC command ...
2021-11-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds15-183/+279
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, smartpqi, lpfc, target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug fixes. Notable core changes are the removal of scsi->tag which caused some churn in obsolete drivers and a sweep through all drivers to call scsi_done() directly instead of scsi->done() which removes a pointer indirection from the hot path and a move to register core sysfs files earlier, which means they're available to KOBJ_ADD processing, which necessitates switching all drivers to using attribute groups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: lpfc: Update lpfc version to 14.0.0.3 scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss scsi: lpfc: Fix link down processing to address NULL pointer dereference scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine scsi: lpfc: Correct sysfs reporting of loop support after SFP status change scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup() scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer scsi: ufs: mediatek: Avoid sched_clock() misuse scsi: mpt3sas: Make mpt3sas_dev_attrs static scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions scsi: target: core: Stop using bdevname() scsi: aha1542: Use memcpy_{from,to}_bvec() scsi: sr: Add error handling support for add_disk() scsi: sd: Add error handling support for add_disk() scsi: target: Perform ALUA group changes in one step scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path scsi: target: Fix alua_tg_pt_gps_count tracking scsi: target: Fix ordered tag handling ...
2021-11-01Merge tag 'for-5.16/ki_complete-2021-10-29' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+2
Pull kiocb->ki_complete() cleanup from Jens Axboe: "This removes the res2 argument from kiocb->ki_complete(). Only the USB gadget code used it, everybody else passes 0. The USB guys checked the user gadget code they could find, and everybody just uses res as expected for the async interface" * tag 'for-5.16/ki_complete-2021-10-29' of git://git.kernel.dk/linux-block: fs: get rid of the res2 iocb->ki_complete argument usb: remove res2 argument from gadget code completions
2021-11-01Merge tag 'for-5.16/passthrough-flag-2021-10-29' of ↵Linus Torvalds1-4/+3
git://git.kernel.dk/linux-block Pull QUEUE_FLAG_SCSI_PASSTHROUGH removal from Jens Axboe: "This contains a series leading to the removal of the QUEUE_FLAG_SCSI_PASSTHROUGH queue flag" * tag 'for-5.16/passthrough-flag-2021-10-29' of git://git.kernel.dk/linux-block: block: remove blk_{get,put}_request block: remove QUEUE_FLAG_SCSI_PASSTHROUGH block: remove the initialize_rq_fn blk_mq_ops method scsi: add a scsi_alloc_request helper bsg-lib: initialize the bsg_job in bsg_transport_sg_io_fn nfsd/blocklayout: use ->get_unique_id instead of sending SCSI commands sd: implement ->get_unique_id block: add a ->get_unique_id method
2021-10-29block: remove blk_{get,put}_requestChristoph Hellwig1-2/+2
These are now pointless wrappers around blk_mq_{alloc,free}_request, so remove them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20211025070517.1548584-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26scsi: target: core: Remove from tmr_list during LUN unlinkDmitry Bogdanov2-23/+24
Currently TMF commands are removed from de_device.dev_tmf_list at the very end of se_cmd lifecycle. However, se_lun unlinks from se_cmd upon a command status (response) being queued in transport layer. This means that LUN and backend device can be deleted in the meantime and a panic will occur: target_tmr_work() cmd->se_tfo->queue_tm_rsp(cmd); // send abort_rsp to a wire transport_lun_remove_cmd(cmd) // unlink se_cmd from se_lun - // - // - // - <<<--- lun remove <<<--- core backend device remove - // - // - // - qlt_handle_abts_completion() tfo->free_mcmd() transport_generic_free_cmd() target_put_sess_cmd() core_tmr_release_req() { if (dev) { // backend device, can not be null spin_lock_irqsave(&dev->se_tmr_lock, flags); //<<<--- CRASH Call Trace: NIP [c000000000e1683c] _raw_spin_lock_irqsave+0x2c/0xc0 LR [c00800000e433338] core_tmr_release_req+0x40/0xa0 [target_core_mod] Call Trace: (unreliable) 0x0 target_put_sess_cmd+0x2a0/0x370 [target_core_mod] transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod] tcm_qla2xxx_complete_mcmd+0x28/0x50 [tcm_qla2xxx] process_one_work+0x2c4/0x5c0 worker_thread+0x88/0x690 For the iSCSI protocol this is easily reproduced: - Send some SCSI sommand - Send Abort of that command over iSCSI - Remove LUN on target - Send next iSCSI command to acknowledge the Abort_Response - Target panics There is no need to keep the command in tmr_list until response completion, so move the removal from tmr_list from the response completion to the response queueing when the LUN is unlinked. Move the removal from state list too as it is a subject to the same race condition. Link: https://lore.kernel.org/r/20211018135753.15297-1-d.bogdanov@yadro.com Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6") Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-25fs: get rid of the res2 iocb->ki_complete argumentJens Axboe1-2/+2
The second argument was only used by the USB gadget code, yet everyone pays the overhead of passing a zero to be passed into aio, where it ends up being part of the aio res2 value. Now that everybody is passing in zero, kill off the extra argument. Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-22scsi: add a scsi_alloc_request helperChristoph Hellwig1-2/+1
Add a new helper that calls blk_get_request and initializes the scsi_request to avoid the indirect call through ->.initialize_rq_fn. Note that this makes the pktcdvd driver depend on the SCSI core, but given that only SCSI devices support SCSI passthrough requests that is not a functional change. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20211021060607.264371-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19scsi: target: core: Stop using bdevname()Christoph Hellwig1-3/+1
Just use the %pg format specifier instead. Link: https://lore.kernel.org/r/20211018065052.1822500-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-18scsi: target: Perform ALUA group changes in one stepMike Christie1-7/+16
When userspace changes the LUN's ALUA group, it will set the LUN's group to NULL then to the new group. Before the new group is set, target_alua_state_check() will return 0 and allow the I/O to execute. This has us skip the NULL stage, and just swap in the new group. Link: https://lore.kernel.org/r/20210930020422.92578-6-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-18scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O pathMike Christie1-27/+34
We are only holding the lun_tg_pt_gp_lock in target_alua_state_check() to make sure tg_pt_gp is not freed from under us while we copy the state, delay, ID values. We can instead use RCU here to access the tg_pt_gp. With this patch IOPs can increase up to 10% for jobs like: fio --filename=/dev/sdX --direct=1 --rw=randrw --bs=4k \ --ioengine=libaio --iodepth=64 --numjobs=N when there are multiple sessions (running that fio command to each /dev/sdX or using multipath and there are over 8 paths), or more than 8 queues for the loop or vhost with multiple threads case and numjobs > 8. Link: https://lore.kernel.org/r/20210930020422.92578-5-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-18scsi: target: Fix alua_tg_pt_gps_count trackingMike Christie1-1/+0
We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's still accessed via configfs. Its release must go through the normal configfs/refcount process. The max alua_tg_pt_gps_count check should probably have been done in core_alua_allocate_tg_pt_gp(), but with the current code userspace could have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff. Then it could have deleted a group with an ID set, and then set the ID for that extra group and it would work ok. It's unlikely, but just in case this patch continues to allow that type of behavior, and just fixes the kfree() while in use bug. Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-18scsi: target: Fix ordered tag handlingMike Christie3-22/+57
This patch fixes the following bugs: 1. If there are multiple ordered cmds queued and multiple simple cmds completing, target_restart_delayed_cmds() could be called on different CPUs and each instance could start a ordered cmd. They could then run in different orders than they were queued. 2. target_restart_delayed_cmds() and target_handle_task_attr() can race where: 1. target_handle_task_attr() has passed the simple_cmds == 0 check. 2. transport_complete_task_attr() then decrements simple_cmds to 0. 3. transport_complete_task_attr() runs target_restart_delayed_cmds() and it does not see any cmds on the delayed_cmd_list. 4. target_handle_task_attr() adds the cmd to the delayed_cmd_list. The cmd will then end up timing out. 3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute them out of order, because target_handle_task_attr() will hit that simple_cmds check first and return false for all ordered cmds sent. 4. We run target_restart_delayed_cmds() after every cmd completion, so if there is more than 1 simple cmd running, we start executing ordered cmds after that first cmd instead of waiting for all of them to complete. 5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older cmds have completed, and not just simple. 6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock for every cmd completion when ordered cmds are almost never used. Just replacing that lock with an atomic increases IOPs by up to 10% when completions are spread over multiple CPUs and there are multiple sessions/ mqs/thread accessing the same device. This patch moves the queued delayed handling to a per device work to serialze the cmd executions for each device and adds a new counter to track HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to determine when to run the work on the completion path. Link: https://lore.kernel.org/r/20210930020422.92578-3-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-18scsi: target: Fix ordered CMD_T_SENT handlingMike Christie1-5/+5
We can race where target_handle_task_attr() has put the cmd on the delayed_cmd_list. Then target_restart_delayed_cmds() has removed it and set CMD_T_SENT, but then target_execute_cmd() now clears that bit. This patch moves the clearing to before we've put the cmd on the list. Link: https://lore.kernel.org/r/20210930020422.92578-2-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-18scsi: target: tcmu: Allocate zeroed pages for data areaBodo Stroesser1-2/+2
Tcmu populates the data area (used for communication with userspace) with pages that are allocated by calling alloc_page(GFP_NOIO). Therefore previous content of the allocated pages is exposed to user space. Avoid this by adding __GFP_ZERO flag. Zeroing the pages does (nearly) not affect tcmu throughput, because allocated pages are re-used for the data transfers of later SCSI cmds. Link: https://lore.kernel.org/r/20211013171606.25197-1-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-18scsi: target: cxgbit: Enable Delayed ACKVarun Prakash2-10/+26
Enable Delayed ACK to reduce the number of TCP ACKs. Link: https://lore.kernel.org/r/1634135109-5044-1-git-send-email-varun@chelsio.com Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-18scsi: target: cxgbit: Increase max DataSegmentLengthVarun Prakash1-5/+12
Current value of max DataSegmentLength is 8K. T5/T6 adapters support DataSegmentLength upto 16K. Increase max DataSegmentLength. Link: https://lore.kernel.org/r/1634135087-4996-1-git-send-email-varun@chelsio.com Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-18target/iblock: use bdev_nr_bytes instead of open coding itChristoph Hellwig1-2/+2
Use the proper helper to read the block device size. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20211018101130.1838532-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: move struct request to blk-mq.hChristoph Hellwig2-0/+2
struct request is only used by blk-mq drivers, so move it and all related declarations to blk-mq.h. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-18-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: move integrity handling out of <linux/blkdev.h>Christoph Hellwig1-0/+1
Split the integrity/metadata handling definitions out into a new header. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-17-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-16scsi: target: tcm_loop: Call scsi_done() directlyBart Van Assche1-2/+2
Conditional statements are faster than indirect calls. Hence call scsi_done() directly. Link: https://lore.kernel.org/r/20211007204618.2196847-9-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12Merge branch '5.15/scsi-fixes' into 5.16/scsi-stagingMartin K. Petersen2-13/+21
Merge the 5.15/scsi-fixes branch into the staging tree to resolve UFS conflict reported by sfr. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: target: tcmu: Use struct_size() helper in kmalloc()Gustavo A. R. Silva1-2/+1
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Link: https://github.com/KSPP/linux/issues/160 Link: https://lore.kernel.org/r/20210927224344.GA190701@embeddedor Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: target: sbp: Replace enable attr with ops.enableDmitry Bogdanov1-25/+5
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-5-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: target: iscsi: Replace tpg enable attr with ops.enableDmitry Bogdanov1-59/+32
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-3-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: target: core: Add common tpg/enable attributeDmitry Bogdanov2-2/+77
Many fabric modules provide their own implementation of enable attribute in tpg. Provide a way to remove code duplication in the fabric modules and automatically add "enable" attribute if a fabric module has an implementation of fabric_enable_tpg(). Link: https://lore.kernel.org/r/20210910084133.17956-2-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04scsi: target: core: Make logs less verboseKonstantin Shelekhin1-4/+4
Change the log level of the following message to debug: Unsupported SCSI Opcode 0xXX, sending CHECK_CONDITION. This message is mostly helpful during debugging sessions in order to understand errors on the initiator side. But most of the time it's just useless and makes reading logs much harder. It gets particularly annoying if there are many initiators that come and go or if an initiator runs a program that does not care whether the command is supported and just keeps sending it. Link: https://lore.kernel.org/r/20210929114959.705852-1-k.shelekhin@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err message. Fix it. Link: https://lore.kernel.org/r/20210920183206.17477-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14scsi: target: Remove unused function argumentsLi Feng1-8/+6
The se_cmd is unused in these functions, just remove it. Link: https://lore.kernel.org/r/20210913083045.3670648-1-fengli@smartx.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Li Feng <fengli@smartx.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-13scsi: target: Fix the pgr/alua_support_store functionsMaurizio Lombardi1-12/+20
Commit 356ba2a8bc8d ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable") introduced support for changeable alua_support and pgr_support target attributes. These can only be changed if the backstore is user-backed, otherwise the kernel returns -EINVAL. This triggers a warning in the targetcli/rtslib code when performing a target restore that includes non-userbacked backstores: # targetctl restore Storage Object block/storage1: Cannot set attribute alua_support: [Errno 22] Invalid argument, skipped Storage Object block/storage1: Cannot set attribute pgr_support: [Errno 22] Invalid argument, skipped Fix this warning by returning an error code only if we are really going to flip the PGR/ALUA bit in the transport_flags field, otherwise we will do nothing and return success. Return ENOSYS instead of EINVAL if the pgr/alua attributes can not be changed, this way it will be possible for userspace to understand if the operation failed because an invalid value has been passed to strtobool() or because the attributes are fixed. Fixes: 356ba2a8bc8d ("scsi: target: tcmu: Make pgr_support and alua_support attributes writable") Link: https://lore.kernel.org/r/20210906151809.52811-1-mlombard@redhat.com Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds10-111/+243
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, qla2xxx, target, smartpqi, lpfc, mpt3sas). The core change causing the most churn was replacing the command request field request with a macro, allowing us to offset map to it and remove the redundant field; the same was also done for the tag field. The most impactful change is the final removal of scsi_ioctl, which has been deprecated for over a decade" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits) scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1 scsi: ufs: ufs-exynos: Fix static checker warning scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI scsi: lpfc: Use the proper SCSI midlayer interfaces for PI scsi: lpfc: Copyright updates for 14.0.0.1 patches scsi: lpfc: Update lpfc version to 14.0.0.1 scsi: lpfc: Add bsg support for retrieving adapter cmf data scsi: lpfc: Add cmf_info sysfs entry scsi: lpfc: Add debugfs support for cm framework buffers scsi: lpfc: Add support for maintaining the cm statistics buffer scsi: lpfc: Add rx monitoring statistics scsi: lpfc: Add support for the CM framework scsi: lpfc: Add cmfsync WQE support scsi: lpfc: Add support for cm enablement buffer scsi: lpfc: Add cm statistics buffer support scsi: lpfc: Add EDC ELS support scsi: lpfc: Expand FPIN and RDF receive logging scsi: lpfc: Add MIB feature enablement support scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware scsi: fc: Add EDC ELS definition ...
2021-08-17scsi: target: Fix sense key for invalid EXTENDED COPY requestSergey Samoylenko1-11/+15
TCM fails to pass the following tests in libiscsi: SCSI.ExtendedCopy.DescrType SCSI.ExtendedCopy.DescrLimits SCSI.ExtendedCopy.ParamHdr SCSI.ExtendedCopy.ValidSegDescr SCSI.ExtendedCopy.ValidTgtDescr The xcopy code always returns the same NOT READY sense key for all detected errors. Change the sense key for invalid requests to ILLEGAL REQUEST, and for aborted transfers to COPY ABORTED. Link: https://lore.kernel.org/r/20210803145410.80147-3-s.samoylenko@yadro.com Fixes: d877d7275be3 ("target: Fix a deadlock between the XCOPY code and iSCSI session shutdown") Reviewed-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by: Sergey Samoylenko <s.samoylenko@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-17scsi: target: Allows backend drivers to fail with specific sense codesSergey Samoylenko1-3/+12
Currently, backend drivers can fail I/O with SAM_STAT_CHECK_CONDITION which gets us TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE. Add a new helper that allows backend drivers to fail with specific sense codes. This is based on a patch from Mike Christie <michael.christie@oracle.com>. Cc: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20210803145410.80147-2-s.samoylenko@yadro.com Reviewed-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Sergey Samoylenko <s.samoylenko@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-17scsi: target: pscsi: Fix possible null-pointer dereference in ↵Tuo Li1-9/+9
pscsi_complete_cmd() The return value of transport_kmap_data_sg() is assigned to the variable buf: buf = transport_kmap_data_sg(cmd); And then it is checked: if (!buf) { This indicates that buf can be NULL. However, it is dereferenced in the following statements: if (!(buf[3] & 0x80)) buf[3] |= 0x80; if (!(buf[2] & 0x80)) buf[2] |= 0x80; To fix these possible null-pointer dereferences, dereference buf and call transport_kunmap_data_sg() only when buf is not NULL. Link: https://lore.kernel.org/r/20210810040414.248167-1-islituo@gmail.com Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Reviewed-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Tuo Li <islituo@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11Merge branch '5.14/scsi-fixes' into 5.15/scsi-stagingMartin K. Petersen2-19/+18
Resolve mpt3sas conflict between 5.14/scsi-fixes and 5.15/scsi-staging reported by sfr. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: tcm_loop: Use scsi_cmd_to_rq() instead of scsi_cmnd.requestBart Van Assche1-2/+2
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-51-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-03scsi: target: core: Drop unnecessary se_cmd ASC/ASCQ membersDavid Disseldorp2-64/+55
These members are only used for ALUA sense detail propagation, which can just as easily be done via sense_reason_t. Link: https://lore.kernel.org/r/20210728115353.2396-4-ddiss@suse.de Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-03scsi: target: sbp: Drop incorrect ASC/ASCQ usageDavid Disseldorp1-2/+2
The se_cmd scsi_asc and scsi_ascq members are only used for tracking ALUA SCSI sense detail between target_core_alua and translate_sense_reason(), so they're effectively always zero here. Link: https://lore.kernel.org/r/20210728115353.2396-3-ddiss@suse.de Cc: Chris Boot <bootc@bootc.net> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-03scsi: target: core: Avoid using lun_tg_pt_gp after unlockDavid Disseldorp1-5/+5
core_alua_state_lba_dependent() currently uses lun->lun_tg_pt_gp without holding the lun_tg_pt_gp_lock. The lock is taken in the caller, so obtain the needed tg_pt_gp_id there instead. Link: https://lore.kernel.org/r/20210728115353.2396-2-ddiss@suse.de Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-03scsi: target: tcmu: Add new feature KEEP_BUFBodo Stroesser1-11/+139
When running command pipelining for WRITE direction commands (e.g. tape device write), userspace sends cmd completion to cmd ring before processing write data. In that case userspace has to copy data before sending completion, because cmd completion also implicitly releases the data buffer in data area. The new feature KEEP_BUF allows userspace to optionally keep the buffer after completion by setting new bit TCMU_UFLAG_KEEP_BUF in tcmu_cmd_entry_hdr->uflags. In that case buffer has to be released explicitly by writing the cmd_id to new action item free_kept_buf. All kept buffers are released during reset_ring and if userspace closes uio device (tcmu_release). Link: https://lore.kernel.org/r/20210713175021.20103-1-bostroesser@gmail.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-28scsi: core: Rename CONFIG_BLK_SCSI_REQUEST to CONFIG_SCSI_COMMONChristoph Hellwig1-1/+1
CONFIG_BLK_SCSI_REQUEST is rather misnamed as it enables building a small amount of code shared by the SCSI initiator, target, and consumers of the scsi_request passthrough API. Rename it and also allow building it as a module. [mkp: add module license] Link: https://lore.kernel.org/r/20210724072033.1284840-20-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27Merge 5.14-rc3 into driver-core-nextGreg Kroah-Hartman2-19/+18
We need the driver-core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-27scsi: target: Remove redundant assignment to variable retColin Ian King3-4/+4
The variable ret is being initialized with a value that is never read, the assignment is redundant and can be removed. Link: https://lore.kernel.org/r/20210721101519.42299-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unused value")
2021-07-21bus: Make remove callback return voidUwe Kleine-König1-3/+2
The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20scsi: target: Fix NULL dereference on XCOPY completionDavid Disseldorp1-1/+1
CPU affinity control added with commit 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") makes target_complete_cmd() queue work on a CPU based on se_tpg->se_tpg_wwn->cmd_compl_affinity state. LIO's EXTENDED COPY worker is a special case in that read/write cmds are dispatched using the global xcopy_pt_tpg, which carries a NULL se_tpg_wwn pointer following initialization in target_xcopy_setup_pt(). The NULL xcopy_pt_tpg->se_tpg_wwn pointer is dereferenced on completion of any EXTENDED COPY initiated read/write cmds. E.g using the libiscsi SCSI.ExtendedCopy.Simple test: BUG: kernel NULL pointer dereference, address: 00000000000001a8 RIP: 0010:target_complete_cmd+0x9d/0x130 [target_core_mod] Call Trace: fd_execute_rw+0x148/0x42a [target_core_file] ? __dynamic_pr_debug+0xa7/0xe0 ? target_check_reservation+0x5b/0x940 [target_core_mod] __target_execute_cmd+0x1e/0x90 [target_core_mod] transport_generic_new_cmd+0x17c/0x330 [target_core_mod] target_xcopy_issue_pt_cmd+0x9/0x60 [target_core_mod] target_xcopy_read_source.isra.7+0x10b/0x1b0 [target_core_mod] ? target_check_fua+0x40/0x40 [target_core_mod] ? transport_complete_task_attr+0x130/0x130 [target_core_mod] target_xcopy_do_work+0x61f/0xc00 [target_core_mod] This fix makes target_complete_cmd() queue work on se_cmd->cpuid if se_tpg_wwn is NULL. Link: https://lore.kernel.org/r/20210720225522.26291-1-ddiss@suse.de Fixes: 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") Cc: Lee Duncan <lduncan@suse.com> Cc: Mike Christie <michael.christie@oracle.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-18scsi: target: Fix protect handling in WRITE SAME(32)Dmitry Bogdanov1-18/+17
WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st byte instead of 10th byte. Link: https://lore.kernel.org/r/20210702091655.22818-1-d.bogdanov@yadro.com Fixes: afd73f1b60fc ("target: Perform PROTECT sanity checks for WRITE_SAME") Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-09Merge tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull more block updates from Jens Axboe: "A combination of changes that ended up depending on both the driver and core branch (and/or the IDE removal), and a few late arriving fixes. In detail: - Fix io ticks wrap-around issue (Chunguang) - nvme-tcp sock locking fix (Maurizio) - s390-dasd fixes (Kees, Christoph) - blk_execute_rq polling support (Keith) - blk-cgroup RCU iteration fix (Yu) - nbd backend ID addition (Prasanna) - Partition deletion fix (Yufen) - Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph) - Removal of now dead block request types due to IDE removal (Christoph) - Loop probing and control device cleanups (Christoph) - Device uevent fix (Christoph) - Misc cleanups/fixes (Tetsuo, Christoph)" * tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits) blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs block: fix the problem of io_ticks becoming smaller nvme-tcp: can't set sk_user_data without write_lock loop: remove unused variable in loop_set_status() block: remove the bdgrab in blk_drop_partitions block: grab a device refcount in disk_uevent s390/dasd: Avoid field over-reading memcpy() dasd: unexport dasd_set_target_state block: check disk exist before trying to add partition ubd: remove dead code in ubd_setup_common nvme: use return value from blk_execute_rq() block: return errors from blk_execute_rq() nvme: use blk_execute_rq() for passthrough commands block: support polling through blk_execute_rq block: remove REQ_OP_SCSI_{IN,OUT} block: mark blk_mq_init_queue_data static loop: rewrite loop_exit using idr_for_each_entry loop: split loop_lookup loop: don't allow deleting an unspecified loop device loop: move loop_ctl_mutex locking into loop_add ...
2021-07-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds18-98/+172
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, ibmvfc, megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with elx and mpi3mr being new drivers. The major core change is a rework to drop the status byte handling macros and the old bit shifted definitions and the rest of the updates are minor fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits) scsi: aha1740: Avoid over-read of sense buffer scsi: arcmsr: Avoid over-read of sense buffer scsi: ips: Avoid over-read of sense buffer scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe() scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame() scsi: elx: libefc: Fix less than zero comparison of a unsigned int scsi: elx: efct: Fix pointer error checking in debugfs init scsi: elx: efct: Fix is_originator return code type scsi: elx: efct: Fix link error for _bad_cmpxchg scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel() scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session() scsi: elx: efct: Fix error handling in efct_hw_init() scsi: elx: efct: Remove redundant initialization of variable lun scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected" scsi: lpfc: Fix build error in lpfc_scsi.c scsi: target: iscsi: Remove redundant continue statement scsi: qla4xxx: Remove redundant continue statement scsi: ppa: Switch to use module_parport_driver() scsi: imm: Switch to use module_parport_driver() scsi: mpt3sas: Fix error return value in _scsih_expander_add() ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 13:22:30 +0000