summaryrefslogtreecommitdiffstats
path: root/drivers/target
AgeCommit message (Collapse)AuthorFilesLines
2014-03-06Target/sbc: Fix sbc_copy_prot for offset scattersSagi Grimberg1-16/+22
When copying between device and command protection scatters we must take into account that device scatters might be offset and we might copy outside scatter range. Thus for each cmd prot scatter we must take the min between cmd prot scatter, dev prot scatter, and whats left (and loop in case we havn't copied enough from/to cmd prot scatter). Example (single t_prot_sg of len 2048): kernel: sbc_dif_copy_prot: se_cmd=ffff880380aaf970, left=2048, len=2048, dev_prot_sg_offset=3072, dev_prot_sg_len=4096 kernel: isert: se_cmd=ffff880380aaf970 PI error found type 0 at sector 0x2600 expected 0x0 vs actual 0x725f, lba=2580 Instead of copying 2048 from offset 3072 (copying junk outside sg limit 4096), we must to copy 1024 and continue to next sg until we complete cmd prot scatter. This issue was found using iSER T10-PI offload over rd_mcp (wasn't discovered with fileio since file_dev prot sglists are never offset). Changes from v1: - Fix sbc_copy_prot copy length miss-calculation Changes from v0: - Removed psg->offset consideration for psg_len computation - Removed sg->offset consideration for offset condition - Added copied consideraiton for len computation - Added copied offset to paddr when doing memcpy Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-04iscsi/iser-target: Fix isert_conn->state hung shutdown issuesNicholas Bellinger1-0/+4
This patch addresses a couple of different hug shutdown issues related to wait_event() + isert_conn->state. First, it changes isert_conn->conn_wait + isert_conn->conn_wait_comp_err from waitqueues to completions, and sets ISER_CONN_TERMINATING from within isert_disconnect_work(). Second, it splits isert_free_conn() into isert_wait_conn() that is called earlier in iscsit_close_connection() to ensure that all outstanding commands have completed before continuing. Finally, it breaks isert_cq_comp_err() into seperate TX / RX related code, and adds logic in isert_cq_rx_comp_err() to wait for outstanding commands to complete before setting ISER_CONN_DOWN and calling complete(&isert_conn->conn_wait_comp_err). Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-04iscsi/iser-target: Use list_del_init for ->i_conn_nodeNicholas Bellinger2-11/+11
There are a handful of uses of list_empty() for cmd->i_conn_node within iser-target code that expect to return false once a cmd has been removed from the per connect list. This patch changes all uses of list_del -> list_del_init in order to ensure that list_empty() returns false as expected. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-04iscsi-target: Fix iscsit_get_tpg_from_np tpg_state bugNicholas Bellinger1-1/+1
This patch fixes a bug in iscsit_get_tpg_from_np() where the tpg->tpg_state sanity check was looking for TPG_STATE_FREE, instead of != TPG_STATE_ACTIVE. The latter is expected during a normal TPG shutdown once the tpg_state goes into TPG_STATE_INACTIVE in order to reject any new incoming login attempts. Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-23Target/sbc: Don't use sg as iterator in sbc_verify_readSagi Grimberg1-5/+5
Because then this sg is passed to sbc_copy_prot which will hit a protection fault in cases we have more than a single sg. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-23target: Add DIF sense codes in transport_generic_request_failureNicholas Bellinger1-0/+3
This patch adds the three missing DIF related sense codes within transport_generic_request_failure(), which are required to ensure that the correct ASC/ASQC is generated by the subsequent call to transport_send_check_condition_and_sense(). Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-23target/sbc: Fix sbc_dif_copy_prot addr offset bugNicholas Bellinger1-3/+2
This patch fixes a bug in sbc_dif_copy_prot() where the updated addr offset did not take into account the case where the associated scatterlist had not been incremented. This addresses the case where incoming protection scatterlists may contain a length smaller than PAGE_SIZE across multiple entires, when the target protection scatterlists are always being explicitly filled up to PAGE_SIZE before adding another entry. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12Target/sbc: Fix protection copy routineSagi Grimberg1-0/+8
Need to take into account that protection sg_list (copy-buffer) may consist of multiple entries. Changes from v0: - Changed commit description Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12target: Simplify command completion by removing CMD_T_FAILED flagRoland Dreier1-4/+1
The CMD_T_FAILED flag is set used in one place to record the result of a trivial test, and it is only tested once, few lines later. We might as well make the code simpler and easier to read by directly doing the test of "success" where we want to use it. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12iscsi-target: Fix SNACK Type 1 + BegRun=0 handlingNicholas Bellinger1-1/+3
This patch fixes Status SNACK handling of BegRun=0 to allow for all unacknowledged respones to be resent, instead of always assuming that BegRun would be an explicit value less than the current ExpStatSN. Reported-by: santosh kulkarni <santosh.kulkarni@calsoftinc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12target: Fix missing length check in spc_emulate_evpd_83()Roland Dreier1-2/+2
Commit fbfe858fea2a ("target_core_spc: Include target device descriptor in VPD page 83") added a new length variable, but (due to a cut and paste mistake?) just checks scsi_name_len against 256 twice. Fix this to check scsi_target_len for overflow too. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12target: Fix 32-bit + CONFIG_LBDAF=n link error w/ sector_divNicholas Bellinger1-1/+1
This patch changes core_alua_state_lba_dependent() to use do_div() instead sector_div() to avoid the following link error on 32-bit with CONFIG_LBDAF=n as reported by Jim: buildlog-1391099072.txt-drivers/built-in.o: In function `target_alua_state_check': buildlog-1391099072.txt-(.text+0x928d93): undefined reference to `__umoddi3' buildlog-1391099072.txt:make: *** [vmlinux] Error 1 -- buildlog-1391101753.txt- CC init/version.o buildlog-1391101753.txt- LD init/built-in.o buildlog-1391101753.txt-drivers/built-in.o: In function `core_alua_state_lba_dependent': buildlog-1391101753.txt-/home/jim/linux/drivers/target/target_core_alua.c:503: undefined reference to `__umoddi3' buildlog-1391101753.txt:make: *** [vmlinux] Error 1 Reported-by: Jim Davis <jim.epost@gmail.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12target: Fix free-after-use regression in PR unregisterNicholas Bellinger1-4/+7
This patch addresses a >= v3.11 free-after-use regression in core_scsi3_emulate_pro_register() that was introduced in the following commit: commit bc118fe4c4a8cfa453491ba77c0a146a6d0e73e0 Author: Andy Grover <agrover@redhat.com> Date: Thu May 16 10:41:04 2013 -0700 target: Further refactoring of core_scsi3_emulate_pro_register() To avoid the free-after-use, save an type value before hand, and only call core_scsi3_put_pr_reg() with a valid *pr_reg. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> #3.11+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-31Merge branch 'for-next' of ↵Linus Torvalds26-222/+1849
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - add support for SCSI Referrals (Hannes) - add support for T10 DIF into target core (nab + mkp) - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab) - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab) - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi) - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn) - allow percpu_ida_alloc() to receive task state bitmask (Kent) - fix >= v3.12 iscsi-target session reset hung task regression (nab) - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab) - fix a long-standing network portal creation race (Andy)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) target: Fix percpu_ref_put race in transport_lun_remove_cmd target/iscsi: Fix network portal creation race target: Report bad sector in sense data for DIF errors iscsi-target: Convert gfp_t parameter to task state bitmask iscsi-target: Fix connection reset hang with percpu_ida_alloc percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask iscsi-target: Pre-allocate more tags to avoid ack starvation qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO. qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine IB/isert: Move fastreg descriptor creation to a function IB/isert: Avoid frwr notation, user fastreg IB/isert: seperate connection protection domains and dma MRs tcm_loop: Enable DIF/DIX modes in SCSI host LLD target/rd: Add DIF protection into rd_execute_rw target/rd: Add support for protection SGL setup + release target/rd: Refactor rd_build_device_space + rd_release_device_space target/file: Add DIF protection support to fd_execute_rw target/file: Add DIF protection init/format support ...
2014-01-30target: Fix percpu_ref_put race in transport_lun_remove_cmdNicholas Bellinger1-2/+3
This patch fixes a percpu_ref_put race for se_lun->lun_ref in transport_lun_remove_cmd() where ->lun_ref could end up being put more than once per command via different target completion and fabric release contexts. It adds a cmpxchg() for se_cmd->lun_ref_active to ensure that percpu_ref_put() is only ever called once per se_cmd. This bug was manifesting itself as a LUN shutdown regression bug in >= v3.13 code, where percpu_ref_kill() would end up hanging indefinately due to the incorrect percpu_ref count. (Change se_cmd->lun_ref_active from bool -> int to force at least a 4-byte cmpxchg with MIPS ll/sc ins. - Fengguang) Reported-by: Tommy Apel <tommyapeldk@gmail.com> Cc: Tommy Apel <tommyapeldk@gmail.com> Cc: <stable@vger.kernel.org> #3.13+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-30target/iscsi: Fix network portal creation raceAndy Grover1-13/+21
When creating network portals rapidly, such as when restoring a configuration, LIO's code to reuse existing portals can return a false negative if the thread hasn't run yet and set np_thread_state to ISCSI_NP_THREAD_ACTIVE. This causes an error in the network stack when attempting to bind to the same address/port. This patch sets NP_THREAD_ACTIVE before the np is placed on g_np_list, so even if the thread hasn't run yet, iscsit_get_np will return the existing np. Also, convert np_lock -> np_mutex + hold across adding new net portal to g_np_list to prevent a race where two threads may attempt to create the same network portal, resulting in one of them failing. (nab: Add missing mutex_unlocks in iscsit_add_np failure paths) (DanC: Fix incorrect spin_unlock -> spin_unlock_bh) Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> #3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-25target: Report bad sector in sense data for DIF errorsSagi Grimberg2-0/+18
SPC-4 states that data-integrity errors shall also report the failed sector in CHECK_CONDITION response sense data information field. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-25iscsi-target: Convert gfp_t parameter to task state bitmaskNicholas Bellinger3-12/+11
This patch propigates the use of task state bitmask now used by percpu_ida_alloc() up the iscsi-target callchain, replacing the use of GFP_ATOMIC for TASK_RUNNING, and GFP_KERNEL for TASK_INTERRUPTIBLE. Also, drop the unnecessary gfp_t parameter to isert_allocate_cmd(), and just pass TASK_INTERRUPTIBLE into iscsit_allocate_cmd(). Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-25iscsi-target: Fix connection reset hang with percpu_ida_allocNicholas Bellinger1-1/+1
This patch addresses a bug where connection reset would hang indefinately once percpu_ida_alloc() was starved for tags, due to the fact that it always assumed uninterruptible sleep mode. So now make percpu_ida_alloc() check for signal_pending_state() for making interruptible sleep optional, and convert iscsit_allocate_cmd() to set TASK_INTERRUPTIBLE for GFP_KERNEL, or TASK_RUNNING for GFP_ATOMIC. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Kent Overstreet <kmo@daterainc.com> Cc: <stable@vger.kernel.org> #3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-23percpu_ida: Make percpu_ida_alloc + callers accept task state bitmaskKent Overstreet2-3/+7
This patch changes percpu_ida_alloc() + callers to accept task state bitmask for prepare_to_wait() for code like target/iscsi that needs it for interruptible sleep, that is provided in a subsequent patch. It now expects TASK_UNINTERRUPTIBLE when the caller is able to sleep waiting for a new tag, or TASK_RUNNING when the caller cannot sleep, and is forced to return a negative value when no tags are available. v2 changes: - Include blk-mq + tcm_fc + vhost/scsi + target/iscsi changes - Drop signal_pending_state() call v3 changes: - Only call prepare_to_wait() + finish_wait() when != TASK_RUNNING (PeterZ) Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: <stable@vger.kernel.org> #3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-19iscsi-target: Pre-allocate more tags to avoid ack starvationNicholas Bellinger1-1/+1
This patch addresses an traditional iscsi-target fabric ack starvation issue where iscsit_allocate_cmd() -> percpu_ida_alloc_state() ends up hitting slow path percpu-ida code, because iscsit_ack_from_expstatsn() is expected to free ack'ed tags after tag allocation. This is done to take into account the tags waiting to be acknowledged and released in iscsit_ack_from_expstatsn(), but who's number are not directly limited by the CmdSN Window queue_depth being enforced by the target. So that said, this patch bumps up the pre-allocated number of per session tags to: (max(queue_depth, ISCSIT_MIN_TAGS) * 2) + ISCSIT_EXTRA_TAGS for good measure to avoid the percpu_ida_alloc_state() slow path. Cc: <stable@vger.kernel.org> #3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-19tcm_loop: Enable DIF/DIX modes in SCSI host LLDNicholas Bellinger1-2/+10
This patch updates tcm_loop_driver_probe() to set protection information using scsi_host_set_prot() and scsi_host_set_guard(), which currently enabled all modes of DIF/DIX protection, minus DIX TYPE0. Also, update tcm_loop_submission_work() to pass struct scsi_cmnd related protection into target_submit_cmd_map_sgls() during CDB dispatch. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-19target/rd: Add DIF protection into rd_execute_rwNicholas Bellinger1-0/+65
This patch adds support for DIF protection into rd_execute_rw() code for WRITE/READ I/O using sbc_dif_verify_[write,read]() logic. It also adds rd_get_prot_table() for locating protection SGLs assoicated with the ramdisk backend device. v2 changes: - Make rd_execute_rw() to u32 sectors count instead of sector_t - Drop SCF_PROT usage Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-19target/rd: Add support for protection SGL setup + releaseNicholas Bellinger2-0/+78
This patch adds rd_build_prot_space() + rd_release_prot_space() logic to setup + release protection information scatterlists. It also adds rd_init_prot() + rd_free_prot() se_subsystem_api callbacks used by target core code for setup + release of protection information. v2 changes: - Drop unused sg_table from rd_release_prot_space (Wei) - Drop rd_release_prot_space call from rd_free_device Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-19target/rd: Refactor rd_build_device_space + rd_release_device_spaceNicholas Bellinger1-45/+68
This patch refactors rd_build_device_space() + rd_release_device_space() into rd_allocate_sgl_table() + rd_release_device_space() so that they may be used seperatly for setup + release of protection information scatterlists. Also add explicit memset of pages within rd_allocate_sgl_table() based upon passed 'init_payload' value. v2 changes: - Drop unused sg_table from rd_release_device_space (Wei) Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-19target/file: Add DIF protection support to fd_execute_rwNicholas Bellinger2-1/+123
This patch adds support for DIF protection into fd_execute_rw() code for WRITE/READ I/O using sbc_dif_verify_[write,read]() logic. It adds fd_do_prot_rw() for handling interface with FILEIO PI, and uses a locally allocated fd_prot->prot_buf + fd_prot->prot_sg for interacting with SBC DIF verify emulation code. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-19target/file: Add DIF protection init/format supportNicholas Bellinger2-0/+141
This patch adds support for DIF protection init/format support into the FILEIO backend. It involves using a seperate $FILE.protection for storing PI that is opened via fd_init_prot() using the common pi_prot_type attribute. The actual formatting of the protection is done via fd_format_prot() using the common pi_prot_format attribute, that will populate the initial PI data based upon the currently configured pi_prot_type. Based on original FILEIO code from Sagi. v1 changes: - Fix sparse warnings in fd_init_format_buf (Fengguang) Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target/iblock: Add blk_integrity + BIP passthrough supportNicholas Bellinger2-2/+90
This patch adds blk_integrity passthrough support for block_device backends using IBLOCK. This includes iblock_alloc_bip() + setup of bio_integrity_payload information that attaches to the leading struct bio once bio_list is populated during fast-path iblock_execute_rw() I/O dispatch. It also updates setup in iblock_configure_device() to detect modes of protection + se dev->dev_attrib.pi_prot_type accordingly, along with creating required bio_set integrity mempools. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target: Add protection SGLs to target_submit_cmd_map_sglsNicholas Bellinger2-3/+15
This patch adds support to target_submit_cmd_map_sgls() for accepting 'sgl_prot' + 'sgl_prot_count' parameters for DIF protection information. Note the passed parameters are stored at se_cmd->t_prot_sg and se_cmd->t_prot_nents respectively. Also, update tcm_loop and vhost-scsi fabrics usage of target_submit_cmd_map_sgls() to take into account the new parameters. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target/configfs: Expose protection device attributesNicholas Bellinger3-0/+103
This patch adds support for exposing DIF protection device attributes via configfs. This includes: pi_prot_type: Protection Type (0, 1, 3 currently support) pi_prot_format: Protection Format Operation (FILEIO only) Within se_dev_set_pi_prot_type() it also adds the se_subsystem_api device callbacks to setup per device protection information. v2 changes: - Drop pi_guard_type + pi_prot_version related code (MKP) - Add pi_prot_format logic (Sagi) - Add ->free_prot callback in target_free_device - Add hw_pi_prot_type read-only attribute Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target/spc: Expose ATO bit in control mode pageNicholas Bellinger1-0/+13
This patch updates spc_modesense_control() to set the Application Tag Owner (ATO) bit when when DIF emulation is enabled by the backend device. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target/sbc: Add P_TYPE + PROT_EN bits to READ_CAPACITY_16Nicholas Bellinger1-0/+5
This patch updates sbc_emulate_readcapacity_16() to set P_TYPE and PROT_EN bits when DIF emulation is enabled by the backend device. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target/spc: Add protection related bits to INQUIRY EVPD=0x86Nicholas Bellinger1-0/+9
This patch updates spc_emulate_evpd_86() (extended INQUIRY) to report GRD_CHK (Guard Check) and REF_CHK (Reference Check) bits when DIF emulation is enabled by the backend device. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target/spc: Add protection bit to standard INQUIRY outputNicholas Bellinger1-0/+5
This patch updates spc_emulate_inquiry_std() to set the PROTECT bit when DIF emulation is enabled by the backend device. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target/sbc: Add DIF TYPE1+TYPE3 read/write verify emulationNicholas Bellinger2-0/+179
This patch adds support for DIF read/write verify emulation for TARGET_DIF_TYPE1_PROT + TARGET_DIF_TYPE3_PROT operation. This includes sbc_dif_verify_write() + sbc_dif_verify_read() calls accessable by backend drivers to perform DIF verify for SGL based data and protection information. Also included is sbc_dif_copy_prot() logic to copy protection information to/from backend provided protection SGLs. Based on scsi_debug.c DIF TYPE1+TYPE3 emulation. v2 changes: - Select CRC_T10DIF for TARGET_CORE in Kconfig (Fengguang) - Drop IP checksum logic from sbc_dif_v1_verify (MKP) - Fix offset on app_tag = 0xffff in sbc_dif_verify_read() Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target/sbc: Add DIF setup in sbc_check_prot + sbc_parse_cdbNicholas Bellinger1-0/+62
This patch adds sbc_check_prot() for performing various DIF related CDB sanity checks, along with setting cmd->prot_type once sanity checks have passed. Also, add calls in sbc_parse_cdb() for READ_[10,12,16] + WRITE_[10,12,16] to perform DIF sanity checking. v2 changes: - Make sbc_check_prot defined as static (Fengguang + Wei) - Remove unprotected READ/WRITE warning (mkp) - Populate cmd->prot_type + friends (Sagi) - Drop SCF_PROT usage Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target: Add DIF CHECK_CONDITION ASC/ASCQ exception casesNicholas Bellinger1-0/+30
This patch adds support for DIF related CHECK_CONDITION ASC/ASCQ exception cases into transport_send_check_condition_and_sense(). This includes: LOGICAL BLOCK GUARD CHECK FAILED LOGICAL BLOCK APPLICATION TAG CHECK FAILED LOGICAL BLOCK REFERENCE TAG CHECK FAILED that used by DIF TYPE1 and TYPE3 failure cases. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09target: Convert inquiry temporary buffer to heap memoryNicholas Bellinger1-3/+8
This patch converts the temporary buffer in spc_emulate_inquiry() to use dynamically allocated memory, instead of local stack memory. Also bump SE_INQUIRY_BUF up to 1024 bytes to be safe when handling multiple large SCSI name descriptors for EVPD=0x83. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09target_core_alua: check for buffer overflowHannes Reinecke1-6/+17
When a writing to a command-provided buffer we need to ensure that we're not writing past the end of it. At the same time we need to continue processing as typically the final data length (ie the required size of the buffer) need to be returned. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09drivers: target: Mark functions and structures as static in tfc_conf.cRashika Kheria1-3/+3
Mark functions ft_tpg_alloc_fabric_acl(), ft_register_configfs() and ft_deregister_configfs() as static in tcm_fc/tfc_conf.c because they are not used outside this file. This eliminates the following warnings in tcm_fc/tfc_conf.c: drivers/target/tcm_fc/tfc_conf.c:270:21: warning: no previous prototype for ‘ft_tpg_alloc_fabric_acl’ [-Wmissing-prototypes] drivers/target/tcm_fc/tfc_conf.c:555:5: warning: no previous prototype for ‘ft_register_configfs’ [-Wmissing-prototypes] drivers/target/tcm_fc/tfc_conf.c:602:6: warning: no previous prototype for ‘ft_deregister_configfs’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09drivers: target: Mark functions as static in tcm_loop.cRashika Kheria1-4/+4
Mark functions tcm_loop_make_naa_tpg(), tcm_loop_drop_naa_tpg(), tcm_loop_make_scsi_hba() and tcm_loop_drop_scsi_hba() as static in loopback/tcm_loop.c because they are not used outside this file. This eliminates the following warning in loopback/tcm_loop.c: drivers/target/loopback/tcm_loop.c:1231:25: warning: no previous prototype for ‘tcm_loop_make_naa_tpg’ [-Wmissing-prototypes] drivers/target/loopback/tcm_loop.c:1276:6: warning: no previous prototype for ‘tcm_loop_drop_naa_tpg’ [-Wmissing-prototypes] drivers/target/loopback/tcm_loop.c:1308:16: warning: no previous prototype for ‘tcm_loop_make_scsi_hba’ [-Wmissing-prototypes] drivers/target/loopback/tcm_loop.c:1378:6: warning: no previous prototype for ‘tcm_loop_drop_scsi_hba’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09drivers: target: Mark function as static in target_core_iblock.cRashika Kheria1-1/+1
Mark function iblock_get_write_cache() as static in target_core_iblock.c because it is not used outside this file. This eliminates the following warning in target_core_iblock.c: drivers/target/target_core_iblock.c:766:6: warning: no previous prototype for ‘iblock_get_write_cache’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09drivers: target: Move prototype declaration of function to header file ↵Rashika Kheria2-4/+5
target_core_pr.h Move prototype declaration of function spc_parse_naa_6h_vendor_specific() from target_core_xcopy.c to header file target_core_pr.h because it is used by more than one file. This eliminates the following warning in target_core_spc.c: drivers/target/target_core_spc.c:138:6: warning: no previous prototype for ‘spc_parse_naa_6h_vendor_specific’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09target_core_alua: Referrals configfs integrationHannes Reinecke5-1/+308
Referrals need an LBA map, which needs to be kept consistent across all target port groups. So instead of tying the map to the target port groups I've implemented a single attribute containing the entire map. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09target_core_alua: Referrals infrastructureHannes Reinecke6-3/+191
Add infrastructure for referrals. v2 changes: - Fix unsigned long long division in core_alua_state_lba_dependent on 32-bit (Fengguang + Chen + Hannes) - Fix compile warning in core_alua_state_lba_dependent (nab) - Convert segment_* + sectors variables in core_alua_state_lba_dependent to u64 (Hannes) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-31Merge tag 'v3.13-rc6' into for-3.14/coreJens Axboe7-35/+29
Needed to bring blk-mq uptodate, since changes have been going in since for-3.14/core was established. Fixup merge issues related to the immutable biovec changes. Signed-off-by: Jens Axboe <axboe@kernel.dk> Conflicts: block/blk-flush.c fs/btrfs/check-integrity.c fs/btrfs/extent_io.c fs/btrfs/scrub.c fs/logfs/dev_bdev.c
2013-12-19target: Remove extra percpu_ref_initAndy Grover1-7/+1
lun->lun_ref is also initialized in core_tpg_post_addlun, so it doesn't need to be done in core_tpg_setup_virtual_lun0. (nab: Drop left-over percpu_ref_cancel_init in failure path) Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-19target/file: Update hw_max_sectors based on current block_sizeNicholas Bellinger3-5/+13
This patch allows FILEIO to update hw_max_sectors based on the current max_bytes_per_io. This is required because vfs_[writev,readv]() can accept a maximum of 2048 iovecs per call, so the enforced hw_max_sectors really needs to be calculated based on block_size. This addresses a >= v3.5 bug where block_size=512 was rejecting > 1M sized I/O requests, because FD_MAX_SECTORS was hardcoded to 2048 for the block_size=4096 case. (v2: Use max_bytes_per_io instead of ->update_hw_max_sectors) Reported-by: Henrik Goldman <hg@x-formation.com> Cc: <stable@vger.kernel.org> #3.5+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-19iscsi-target: Fix incorrect np->np_thread NULL assignmentNicholas Bellinger2-6/+1
When shutting down a target there is a race condition between iscsit_del_np() and __iscsi_target_login_thread(). The latter sets the thread pointer to NULL, and the former tries to issue kthread_stop() on that pointer without any synchronization. This patch moves the np->np_thread NULL assignment into iscsit_del_np(), after kthread_stop() has completed. It also removes the signal_pending() + np_state check, and only exits when kthread_should_stop() is true. Reported-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> #3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-17target_core_spc: Include target device descriptor in VPD page 83Hannes Reinecke1-1/+42
We should be including a descriptor referring to the target device to allow identification of different TCM instances. (nab: Bump SE_INQUIRY_BUF to 1024 bytes to handle 2x 256 byte SCSI names) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 10:55:43 +0000