summaryrefslogtreecommitdiffstats
path: root/drivers/target
AgeCommit message (Collapse)AuthorFilesLines
2013-12-31Merge tag 'v3.13-rc6' into for-3.14/coreJens Axboe7-35/+29
Needed to bring blk-mq uptodate, since changes have been going in since for-3.14/core was established. Fixup merge issues related to the immutable biovec changes. Signed-off-by: Jens Axboe <axboe@kernel.dk> Conflicts: block/blk-flush.c fs/btrfs/check-integrity.c fs/btrfs/extent_io.c fs/btrfs/scrub.c fs/logfs/dev_bdev.c
2013-12-19target: Remove extra percpu_ref_initAndy Grover1-7/+1
lun->lun_ref is also initialized in core_tpg_post_addlun, so it doesn't need to be done in core_tpg_setup_virtual_lun0. (nab: Drop left-over percpu_ref_cancel_init in failure path) Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-19target/file: Update hw_max_sectors based on current block_sizeNicholas Bellinger3-5/+13
This patch allows FILEIO to update hw_max_sectors based on the current max_bytes_per_io. This is required because vfs_[writev,readv]() can accept a maximum of 2048 iovecs per call, so the enforced hw_max_sectors really needs to be calculated based on block_size. This addresses a >= v3.5 bug where block_size=512 was rejecting > 1M sized I/O requests, because FD_MAX_SECTORS was hardcoded to 2048 for the block_size=4096 case. (v2: Use max_bytes_per_io instead of ->update_hw_max_sectors) Reported-by: Henrik Goldman <hg@x-formation.com> Cc: <stable@vger.kernel.org> #3.5+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-19iscsi-target: Fix incorrect np->np_thread NULL assignmentNicholas Bellinger2-6/+1
When shutting down a target there is a race condition between iscsit_del_np() and __iscsi_target_login_thread(). The latter sets the thread pointer to NULL, and the former tries to issue kthread_stop() on that pointer without any synchronization. This patch moves the np->np_thread NULL assignment into iscsit_del_np(), after kthread_stop() has completed. It also removes the signal_pending() + np_state check, and only exits when kthread_should_stop() is true. Reported-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> #3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-11iscsi-target: Fix-up all zero data-length CDBs with R/W_BIT setNicholas Bellinger1-14/+12
This patch changes special case handling for ISCSI_OP_SCSI_CMD where an initiator sends a zero length Expected Data Transfer Length (EDTL), but still sets the WRITE and/or READ flag bits when no payload transfer is requested. Many, many moons ago two special cases where added for an ancient version of ESX that has long since been fixed, so instead of adding a new special case for the reported bug with a Broadcom 57800 NIC, go ahead and always strip off the incorrect WRITE + READ flag bits. Also, avoid sending a reject here, as RFC-3720 does mandate this case be handled without protocol error. Reported-by: Witold Bazakbal <865perl@wp.pl> Tested-by: Witold Bazakbal <865perl@wp.pl> Cc: <stable@vger.kernel.org> #3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-11target: Remove write-only stats fields and lock from struct se_node_aclRoland Dreier1-2/+0
Commit 04f3b31bff72 ("iscsi-target: Convert iscsi_session statistics to atomic_long_t") removed the updating of these fields in iscsi (the only fabric driver that ever touched these counters), and the core has no way to report or otherwise use the values. Remove the last remnants of these counters. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-11iscsi-target: return -EINVAL on oversized configfs parameterEric Seppanen1-1/+2
The iSCSI CHAP auth parameters are already copied with respect for the destination buffer size. Return -EINVAL instead of silently truncating the input. Signed-off-by: Eric Seppanen <eric@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-23block: Abstract out bvec iteratorKent Overstreet1-1/+1
Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-11-22Merge branch 'for-next' of ↵Linus Torvalds39-646/+824
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Things have been quiet this round with mostly bugfixes, percpu conversions, and other minor iscsi-target conformance testing changes. The highlights include: - Add demo_mode_discovery attribute for iscsi-target (Thomas) - Convert tcm_fc(FCoE) to use percpu-ida pre-allocation - Add send completion interrupt coalescing for ib_isert - Convert target-core to use percpu-refcounting for se_lun - Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn - tcm_loop updates (Hannes) - target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes) v3.14 is currently shaping to be a busy development cycle in target land, with initial support for T10 Referrals and T10 DIF currently on the roadmap" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits) iscsi-target: chap auth shouldn't match username with trailing garbage iscsi-target: fix extract_param to handle buffer length corner case iscsi-target: Expose default_erl as TPG attribute target_core_configfs: split up ALUA supported states target_core_alua: Make supported states configurable target_core_alua: Store supported ALUA states target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED target_core_alua: spellcheck target core: rename (ex,im)plict -> (ex,im)plicit percpu-refcount: Add percpu-refcount.o to obj-y iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN iscsi-target: Convert iscsi_session statistics to atomic_long_t target: Convert se_device statistics to atomic_long_t target: Fix delayed Task Aborted Status (TAS) handling bug iscsi-target: Reject unsupported multi PDU text command sequence ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn target: Core does not need blkdev.h target: Pass through I/O topology for block backstores iser-target: Avoid using FRMR for single dma entry requests ...
2013-11-20iscsi-target: chap auth shouldn't match username with trailing garbageEric Seppanen1-1/+4
In iSCSI negotiations with initiator CHAP enabled, usernames with trailing garbage are permitted, because the string comparison only checks the strlen of the configured username. e.g. "usernameXXXXX" will be permitted to match "username". Just check one more byte so the trailing null char is also matched. Signed-off-by: Eric Seppanen <eric@purestorage.com> Cc: <stable@vger.kernel.org> #3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20iscsi-target: fix extract_param to handle buffer length corner caseEric Seppanen1-1/+1
extract_param() is called with max_length set to the total size of the output buffer. It's not safe to allow a parameter length equal to the buffer size as the terminating null would be written one byte past the end of the output buffer. Signed-off-by: Eric Seppanen <eric@purestorage.com> Cc: <stable@vger.kernel.org> #3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20iscsi-target: Expose default_erl as TPG attributeNicholas Bellinger6-7/+36
This patch exposes default_erl as a TPG attribute so that it may be set TPG wide in demo-mode, but still allow the existing NodeACL attribute to be overridden on a per initiator basis. Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20target_core_configfs: split up ALUA supported statesHannes Reinecke1-43/+84
Split up the various ALUA states into individual attributes to make parsing easier and adhere to the one value per attribute sysfs principle. (nab: Convert strict_strtoul -> kstrtoul usage) Signed-off-by: Hannes Reinecke <hare@suse.de>
2013-11-20target_core_alua: Make supported states configurableHannes Reinecke1-0/+50
Signed-off-by: Hannes Reinecke <hare@suse.de>
2013-11-20target_core_alua: Store supported ALUA statesHannes Reinecke2-6/+19
The supported ALUA states might be different for individual devices, so store it in a separate field. (nab: Remove unnecessary line continuation) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZEDHannes Reinecke2-6/+6
Rename ALUA_ACCESS_STATE_OPTMIZED to ALUA_ACCESS_STATE_OPTIMIZED. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20target_core_alua: spellcheckHannes Reinecke1-9/+9
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20target core: rename (ex,im)plict -> (ex,im)plicitHannes Reinecke9-100/+100
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-19iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSNNicholas Bellinger2-8/+11
This patch changes iscsit_sequence_cmd() logic to no longer reject non-immediate CmdSNs that exceed MaxCmdSN with a protocol error, but instead silently ignore them. This is done to correctly follow RFC-3720 Section 3.2.2.1: For non-immediate commands, the CmdSN field can take any value from ExpCmdSN to MaxCmdSN inclusive. The target MUST silently ignore any non-immediate command outside of this range or non- immediate duplicates within the range. Reported-by: Santosh Kulkarni <santosh.kulkarni@calsoftinc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-19iscsi-target: Convert iscsi_session statistics to atomic_long_tNicholas Bellinger6-50/+25
This patch converts a handful of iscsi_session statistics to type atomic_long_t, instead of using iscsi_session->session_stats_lock when incrementing these values. More importantly, go ahead and drop the spinlock usage within iscsit_setup_scsi_cmd(), iscsit_check_dataout_hdr(), iscsit_send_datain(), and iscsit_build_rsp_pdu() fast-path code. (Squash in Roland's target: Remove write-only stats fields and lock from struct se_node_acl) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-13target: Convert se_device statistics to atomic_long_tNicholas Bellinger3-16/+13
This patch converts the handful of se_device statistics to type atomic_long_t, instead of using se_device->stats_lock when incrementing these values. More importantly, go ahead and drop the spinlock usage within transport_lookup_cmd_lun() fast-path code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-13target: Fix delayed Task Aborted Status (TAS) handling bugNicholas Bellinger1-0/+2
This patch fixes a bug in delayed Task Aborted Status (TAS) handling, where transport_send_task_abort() was not returning for the case when the se_tfo->write_pending() callback indicated that last fabric specific WRITE PDU had not yet been received. It also adds an explicit cmd->scsi_status = SAM_STAT_TASK_ABORTED assignment within transport_check_aborted_status() to avoid the case where se_tfo->queue_status() is called when the SAM_STAT_TASK_ABORTED assignment + ->queue_status() in transport_send_task_abort() does not occur once SCF_SENT_DELAYED_TAS has been set. Cc: <stable@vger.kernel.org> #3.2+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-13iscsi-target: Reject unsupported multi PDU text command sequenceNicholas Bellinger1-0/+7
This patch adds a check to reject text commands with F_BIT=0 || C_BIT=1, as multi PDU text command sequences are currently unsupported. This avoids the case where a text command received with F_BIT=0, was generating a text response with F_BIT=1 which is a protocol error according to RFC-3720 Section 10.11.1. Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-12iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsnNicholas Bellinger2-5/+6
This patch fixes a >= v3.10 regression bug with mutex_trylock() usage within iscsit_increment_maxcmdsn(), that was originally added to allow for a special case where ->cmdsn_mutex was already held from the iscsit_execute_cmd() exception path for ib_isert. When !mutex_trylock() was occuring under contention during normal RX/TX process context codepaths, the bug was manifesting itself as the following protocol error: Received CmdSN: 0x000fcbb7 is greater than MaxCmdSN: 0x000fcbb6, protocol error. Received CmdSN: 0x000fcbb8 is greater than MaxCmdSN: 0x000fcbb6, protocol error. This patch simply avoids the direct ib_isert callback in lio_queue_status() for the special iscsi_execute_cmd() exception cases, that allows the problematic mutex_trylock() usage in iscsit_increment_maxcmdsn() to go away. Reported-by: Moussa Ba <moussaba@micron.com> Tested-by: Moussa Ba <moussaba@micron.com> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-12target: Core does not need blkdev.hAndy Grover3-3/+0
Target core does not depend on the block layer, only backstores that use the block layer do. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-12target: Pass through I/O topology for block backstoresAndy Grover3-3/+63
In addition to block size (already implemented), passing through alignment offset, logical-to-phys block exponent, I/O granularity and optimal I/O length will allow initiators to properly handle layout on LUNs with 4K block sizes. Tested with various weird values via scsi_debug module. One thing to look at with this patch is the new block limits values -- instead of granularity 1 optimal 8192, Lio will now be returning whatever the block device says, which may affect performance. Signed-off-by: Andy Grover <agrover@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-08target: Add per device xcopy_lun for copy offload I/ONicholas Bellinger2-17/+10
This patch adds a se_device->xcopy_lun that is used for local copy offload I/O, instead of allocating + initializing a pseudo se_lun for each received EXTENDED_COPY operation. Also, move declaration of struct se_lun + struct se_port_stat_grps ahead of struct se_device. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-07target: Drop left-over se_lun->lun_cmd_list shutdown codeNicholas Bellinger3-232/+4
Now with percpu refcounting for se_lun in place, go ahead and drop the legacy per se_cmd accounting for se_lun shutdown. This includes __transport_clear_lun_from_sessions(), the associated transport_lun_wait_for_tasks() logic, along with a handful of now unused se_cmd structure members and ->transport_state bits. Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-07target: Add percpu refcounting for se_lun accessNicholas Bellinger5-18/+40
This patch adds percpu refcounting for se_lun access that allows the association of an se_lun + se_cmd in transport_lookup_cmd_lun() to occur without an extra list_head for tracking outstanding I/O during se_lun shutdown. This effectively changes se_lun shutdown logic to wait for outstanding I/O percpu references to complete in transport_lun_remove_cmd() using se_lun->lun_ref_comp, instead of explicitly draining the per se_lun command list and waiting for individual se_cmd descriptor processing to complete. Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-07iscsi-target: Do not generate REJECTs for zero-length DataOUTNicholas Bellinger1-4/+3
This patch changes iscsit_check_dataout_hdr() to no longer generate REJECTs for zero-length DataOUTs, and instead simply ignore these requests. This follows RFC-3720, Section 10.7.7. DataSegmentLength "This is the data payload length of a SCSI Data-In or SCSI Data-Out PDU. The sending of 0 length data segments should be avoided, but initiators and targets MUST be able to properly receive 0 length data segments." Reported-by: Santosh Kulkarni <santosh.kulkarni@calsoftinc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-25target/pscsi: fix return value checkWei Yongjun1-4/+4
In case of error, the function scsi_host_lookup() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-24target: Fail XCOPY for non matching source + destination block_sizeNicholas Bellinger1-1/+13
This patch adds an explicit check + failure for XCOPY I/O to source + destination devices with a non-matching block_size. This limitiation is currently due to the fact that the scatterlist memory allocated for the XCOPY READ operation is passed zero-copy to the XCOPY WRITE operation. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-24target: Generate failure for XCOPY I/O with non-zero scsi_statusNicholas Bellinger1-1/+2
This patch adds the missing non-zero se_cmd->scsi_status check required for local XCOPY I/O within target_xcopy_issue_pt_cmd() to signal an exception case failure. This will trigger the generation of SAM_STAT_CHECK_CONDITION status from within target_xcopy_do_work() process context code. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-24target: Add missing XCOPY I/O operation sense_bufferNicholas Bellinger1-2/+3
This patch adds the missing xcopy_pt_cmd->sense_buffer[] required for correctly handling CHECK_CONDITION exceptions within the locally generated XCOPY I/O path. Also update target_xcopy_read_source() + target_xcopy_setup_pt_cmd() to pass this buffer into transport_init_se_cmd() to correctly setup se_cmd->sense_buffer. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-23iscsi-target: Implement demo_mode_discovery logicThomas Glanzmann1-9/+30
If demo_mode_discovery=0 and generate_node_acls=0 (demo mode dislabed) do not return TargetName+TargetAddress unless a NodeACL exists. Signed-off-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-23target: Export symbol core_tpg_check_initiator_node_aclThomas Glanzmann2-2/+1
Export symbol core_tpg_check_initiator_node_acl and move prototype from the private drivers/target/target_core_internal.h to the public include/target/target_core_fabric.h Signed-off-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-23iscsi-target: Add new TPG attributeThomas Glanzmann4-0/+29
Add a new TPG attribute demo_mode_discovery which is enabled by default. Signed-off-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-16tcm_loop: Implement target resetHannes Reinecke1-0/+26
Implement target reset by resetting the transport status. (nab: Remove unused ret in tcm_loop_target_reset) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-16tcm_loop: TCQ and command abort supportHannes Reinecke2-4/+69
Implement TCQ support, which enables us to do proper command abort, too. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-16tcm_loop: separate out tcm_loop_issue_tmrHannes Reinecke1-33/+50
No functional change. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-16tcm_loop: Implement transport offlineHannes Reinecke2-1/+56
Add attribute 'transport_status' to simulate link failure. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-16tcm_loop: Check for valid hba in tcm_loop_drop_nexus()Hannes Reinecke1-1/+4
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-16target/iscsi: Remove macros that contain typecastsAndy Grover6-22/+18
These just want to return a pointer instead of a value, but are otherwise the same. ISCSI_TPG_LUN macro was unused. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-16target/iscsi: Remove iscsi dereferencing macrosAndy Grover4-36/+27
These are all straightforward. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-16target: Remove TF_CIT_TMPL macroAndy Grover6-56/+56
Remove a lingering macro that just hid a dereference. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-16target: Return an error for WRITE SAME with ANCHOR==1Roland Dreier1-0/+5
Per SBC-3, since we report ANC_SUP==0 in VPD page B2h, we need to return an error (ILLEGAL REQUEST/INVALID FIELD IN CDB) for all WRITE SAME requests with ANCHOR==1. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-09target: Reject EXTENDED_COPY when emulate_3pc is disabledNicholas Bellinger1-0/+9
This patch rejects EXTENDED_COPY when the emulate_3pc attribute has been explicitly disabled for the receiving device. It also adds a similar check in target_xcopy_locate_se_dev_e4() to ignore these devices when doing a search based upon the identifier WWN provided by EXTENDED_COPY parameter list target descriptors. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-09target: Allow non zero ListID in EXTENDED_COPY parameter listNicholas Bellinger1-5/+2
This patch changes target_do_xcopy() to allow processing of non-zero ListIDs in EXTENDED_COPY parameter list data, instead of returning CHECK_CONDITION status. As the copy offload implementation reports SNLID=1 (Supports No ListID) in OPERATING PARAMETERS, any ListID value presented by the client is currently ignored. Also, properly extract list_id_usage for informational purposes. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-09target: Make target_do_xcopy failures return INVALID_PARAMETER_LISTNicholas Bellinger1-8/+9
This patch changes target_do_xcopy() to properly return TCM_INVALID_PARAMETER_LIST instead of TCM_INVALID_CDB_FIELD for failures related to the EXTENDED_COPY parameter list parsing. Also, move struct xcopy_op allocation ahead of kmapping to handle the special TCM_OUT_OF_RESOURCES case. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-03iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tagsNicholas Bellinger1-1/+1
This patch bumps the default number of tags allocated per session by iscsi-target via transport_alloc_session_tags() -> percpu_ida_init() by another (tag_num / 2). This is done to take into account the tags waiting to be acknowledged and released in iscsit_ack_from_expstatsn(), but who's number are not directly limited by the CmdSN Window queue_depth being enforced by the target. Using a larger value here is also useful to prevent percpu_ida_alloc() from having to steal tags from other CPUs when no tags are available on the local CPU, while waiting for unacknowledged tags to be released. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 17:18:55 +0000