summaryrefslogtreecommitdiffstats
path: root/drivers/staging
AgeCommit message (Collapse)AuthorFilesLines
2022-10-08Merge tag 'clk-for-linus' of ↵Linus Torvalds7-692/+0
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have some late breaking reports that a patch series to rework clk rate range support broke boot on some devices, so I've left that branch out of this. Hopefully we can get to that next week, or punt on it and let it bake another cycle. That means we don't really have any changes to the core framework this time around besides a few typo fixes. Instead this is all clk driver updates and fixes. The usual suspects are here (again), with Qualcomm dominating the diffstat. We look to have gained support for quite a few new Qualcomm SoCs and Dmitry worked on updating many of the existing Qualcomm drivers to use clk_parent_data. After that we have MediaTek drivers getting some much needed updates, in particular to support GPU DVFS. There are also quite a few Samsung clk driver patches, but that's mostly because there was a maintainer change and so last release we missed some of those patches. Overall things look normal, but I'm slowly reviewing core framework code nowadays and that shows given the rate range patches had to be yanked last minute. Let's hope this situation changes soon. New Drivers: - Support for Renesas VersaClock7 clock generator family - Add Spreadtrum UMS512 SoC clk support - New clock drivers for MediaTek Helio X10 MT6795 - Display clks for Qualcomm SM6115, SM8450 - GPU clks for Qualcomm SC8280XP - Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers Deleted Drivers: - Remove DaVinci DM644x and DM646x clk driver support Updates: - Convert Baikal-T1 CCU driver to platform driver - Split reset support out of primary Baikal-T1 CCU driver - Add some missing clks required for RPiVid Video Decoder on RaspberryPi - Mark PLLC critical on bcm2835 - More devm helpers for fixed rate registration - Various PXA168 clk driver fixes - Add resets for MediaTek MT8195 PCIe and USB - Miscellaneous of_node_put() fixes - Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock - Convert gpio-clk-gate binding to YAML - Various fixes to AMD/Xilinx Zynqmp clk driver - Graduate AMD/Xilinx "clocking wizard" driver from staging - Add missing DPI1_HDMI clock in MT8195 VDOSYS1 - Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195 - Fix GPU clock topology on MT8195 - Propogate rate changes from GPU clock gate up the tree - Clock mux notifiers for GPU-related PLLs - Conversion of more "simple" drivers to mtk_clk_simple_probe() - Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers - Fixes to previous |struct clk| to |struct clk_hw| conversion on MediaTek - Shrink MT8192 clock driver by deduplicating clock parent lists - Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk' clocks for i.MX8MP - Drop unnecessary newline in i.MX8MM dt-bindings - Add more MU1 and SAI clocks dt-bindings Ids - Introduce slice busy bit check for i.MX93 composite clock - Introduce white list bit check for i.MX93 composite clock - Add new i.MX93 clock gate - Add MU1 and MU2 clocks to i.MX93 clock provider - Add SAI IPG clocks to i.MX93 clock provider - add generic clocks for U(S)ART available on SAMA5D2 SoCs - reset controller support for Polarfire clocks - .round_rate and .set rate support for clk-mpfs - code cleanup for clk-mpfs - PLL support for PolarFire SoC's Clock Conditioning Circuitry - Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car V4H - Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8 - Add I2C clocks and resets on RZ/V2M - Document clock support for the RZ/Five SoC - mux-variant clock using the table variant to select parents - clock controller for the rv1126 soc - conversion of rk3128 to yaml and relicensing of the yaml bindings to gpl2+MIT (following dt-binding guildelines) - Exynos7885: add FSYS, TREX and MFC clock controllers - Exynos850: add IS and AUD (audio) clock controllers with bindings - ExynosAutov9: add FSYS clock controllers with bindings - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock controllers, due to duplicated entries. This is an acceptable ABI break: recently developed/added platform so without legacies, acked by known users/developers - ExynosAutov9: add few missing Peric 0/1 gates - ExynosAutov9: correct register offsets of few Peric 0/1 clocks - Minor code improvements (use of_device_get_match_data() helper, code style) - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as he already maintainers that architecture/platform - Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving retention issues during suspend of USB on Qualcomm sc7180/sc7280 and SC8280XP - Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration - Qualcomm SDM660 SDCC1 moved to floor clk ops - Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018 was added/fixed - The Qualcomm MSM8996 CPU clocks are updated with support for ACD - Support for Qualcomm SDM670 GCC and RPMh clks was added - Transition to parent_data, parent_hws and use of ARRAY_SIZE() for num_parents was done for many Qualcomm SoCs - Support for per-reset defined delay on Qualcomm was introduced" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits) clk: qcom: gcc-sm6375: Ensure unsigned long type clk: qcom: gcc-sm6375: Remove unused variables clk: qcom: kpss-xcc: convert to parent data API clk: introduce (devm_)hw_register_mux_parent_data_table API clk: allow building lan966x as a module clk: clk-xgene: simplify if-if to if-else clk: ast2600: BCLK comes from EPLL clk: clocking-wizard: Depend on HAS_IOMEM clk: clocking-wizard: Use dev_err_probe() helper clk: nxp: fix typo in comment clk: pxa: add a check for the return value of kzalloc() clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975 dt-bindings: clock: vc5: Add 5P49V6975 clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe clk: Renesas versaclock7 ccf device driver dt-bindings: Renesas versaclock7 device tree bindings clk: ti: Balance of_node_get() calls for of_find_node_by_name() clk: imx: scu: fix memleak on platform_device_add() fails clk: vc5: Use regmap_{set,clear}_bits() where appropriate ...
2022-10-08Merge tag 'staging-6.1-rc1' of ↵Linus Torvalds152-8161/+2149
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the large set of staging driver changes for 6.1-rc1. Nothing really interesting in here at all except we deleted a driver (fwserial) as no one had been using it for a long time. Other than that, just the normal cleanups and minor fixes: - rtl8723bs driver cleanups - loads of r8188eu driver cleanups, making the driver smaller and fixing up some firmware dependency issues. - vt6655 driver cleanups. - lots of other small staging driver cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'staging-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (266 commits) staging: rtl8192e: Rename variable Bandwidth to avoid CamelCase staging: r8188eu: remove PHY_RFConfig8188E() staging: r8188eu: remove PHY_RF6052_Config8188E() staging: r8188eu: convert ODM_ReadAndConfig_AGC_TAB_1T_8188E() to int staging: r8188eu: convert ODM_ReadAndConfig_PHY_REG_1T_8188E() to int staging: r8188eu: convert ODM_ReadAndConfig_RadioA_1T_8188E() to int staging: r8188eu: convert ODM_ReadAndConfig_MAC_REG_8188E() to int staging: rtl8192e: cmdpkt: Use skb_put_data() instead of skb_put/memcpy pair staging: r8188eu: Use skb_put_data() instead of skb_put/memcpy pair staging: r8188eu: remove hal/odm_RegConfig8188E.c staging: r8188eu: make odm_ConfigRF_RadioA_8188E() static staging: r8188eu: make odm_ConfigMAC_8188E() static staging: r8188eu: don't check for stop/removal in the blink worker staging: r8188eu: don't check bSurpriseRemoved in SwLedOff staging: rtl8192e: Remove unused variables ForcedAMSDUMaxSize, ... staging: rtl8192e: Rename CurrentMPDU..., ForcedAMPDU... and ForcedMPDU... staging: rtl8192e: Rename SelfMimoPs, CurrentOpMode and bForcedShortGI staging: rtl8192e: Rename PeerMimoPs, IOTAction and IOTRaFunc staging: rtl8192e: Rename RxRe...WinSize, RxReorder... and RxReorderDr... staging: rtl8192e: Rename szRT2RTAggBuffer, bRegRxRe... and bCurRxReo... ...
2022-10-08Merge tag 'char-misc-6.1-rc1' of ↵Linus Torvalds9-798/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...
2022-10-07Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-10-07Merge tag 'media/v6.1-1' of ↵Linus Torvalds218-19840/+37288
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New driver for Mediatek MDP V3 - New driver for NXP i.MX DW100 dewarper - Zoran driver got promoted from staging - Hantro and related drivers got promoted from staging - Several VB1 drivers got moved to staging/deprecated (cpia2, fsl-viu, meye, saa7146, av7110, stkwebcam, tm6000, vpfe_capture, davinci, zr364xx) - Usual set of driver fixes, improvements and cleanups * tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (107 commits) media: destage Hantro VPU driver media: platform: mtk-mdp3: add MediaTek MDP3 driver media: dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA media: dt-binding: mediatek: add bindings for MediaTek MDP3 components media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init media: xilinx: video: Add 1X12 greyscale format media: xilinx: csi2rxss: Add 1X12 greyscale format media: staging: media: imx: imx7-media-csi: Increase video mem limit media: uvcvideo: Limit power line control for Sonix Technology media: uvcvideo: Use entity get_cur in uvc_ctrl_set media: uvcvideo: Fix typo 'the the' in comment media: uvcvideo: Use indexed loops in uvc_ctrl_init_ctrl() media: uvcvideo: Fix memory leak in uvc_gpio_parse media: renesas: vsp1: Add support for RZ/G2L VSPD media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bit media: renesas: vsp1: Add support for VSP software version media: renesas: vsp1: Add support to deassert/assert reset line media: dt-bindings: media: renesas,vsp1: Document RZ/G2L VSPD bindings media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start() media: amphion: fix a bug that vpu core may not resume after suspend ...
2022-10-05Merge tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-10/+5
Pull drm updates from Dave Airlie: "Lots of stuff all over, some new AMD IP support and gang submit support. i915 has further DG2 and Meteorlake pieces, and a bunch of i915 display refactoring. msm has a shrinker rework. There are also a bunch of conversions to use kunit. This has two external pieces, some MEI changes needed for future Intel discrete GPUs. These should be acked by Greg. There is also a cross maintainer shared tree with some backlight rework from Hans in here. Core: - convert selftests to kunit - managed init for more objects - move to idr_init_base - rename fb and gem cma helpers to dma - hide unregistered connectors from getconnector ioctl - DSC passthrough aux support - backlight handling improvements - add dma_resv_assert_held to vmap/vunmap edid: - move luminance calculation to core fbdev: - fix aperture helper usage fourcc: - add more format helpers - add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx - add packed AYUV8888, XYUV8888 - add some kunit tests ttm: - allow bos without backing store - rewrite placement to use intersect/compatible functions dma-buf: - docs update - improve signalling when debugging udmabuf: - fix failure path GPF dp: - drop dp/mst legacy code - atomic mst state support - audio infoframe packing panel: - Samsung LTL101AL01 - B120XAN01.0 - R140NWF5 RH - DMT028VGHMCMI-1A T - AUO B133UAN02.1 - IVO M133NW4J-R3 - Innolux N120ACA-EA1 amdgpu: - Gang submit support - Mode2 reset for RDNA2 - New IP support: DCN 3.1.4, 3.2 SMU 13.x NBIO 7.7 GC 11.x PSP 13.x SDMA 6.x GMC 11.x - DSC passthrough support - PSP fixes for TA support - vangogh GFXOFF stats - clang fixes - gang submit CS cleanup prep work - fix VRAM eviction issues amdkfd: - GC 10.3 IP ISA fixes - fix CRIU regression - CPU fault on COW mapping fixes i915: - align fw versioning with kernel practices - add display substruct to i915 private - add initial runtime info to driver info - split out HDCP and backlight registers - MEI XeHP SDV GSC support - add per-gt sysfs defaults - TLB invalidation improvements - Disable PCI BAR resize on 32-bit - GuC firmware updates and compat changes - GuC log timestamp translation - DG2 preemption workaround changes - DG2 improved HDMI pixel clocks support - PCI BAR sanity checks - Enable DC5 on DG2 - DG2 DMC fw bumped - ADL-S PCI ID added - Meteorlake enablement - Rename ggtt_view to gtt_view - host RPS fixes - release mmaps on rpm suspend on discrete - clocking and dpll refactoring - VBT definitions and parsing updates - SKL watermark code extracted to separate file - allow seamless M/N changes on eDP panels - BUG_ON removal and cleanups msm: - DPU: simplified VBIF configuration cleanup CTL interfaces - DSI: removed unused msm_display_dsc_config struct switch regulator calls to new API switched to PANEL_BRIDGE for direct attached panels - DSI_PHY: convert drivers to parent_hws - DP: cleanup pixel_rate handling - HDMI: turned hdmi-phy-8996 into OF clk provider - misc dt-bindings fixes - choose eDP as primary display if it's available - support getting interconnects from either the mdss or the mdp5/dpu device nodes - gem: Shrinker + LRU re-work: - adds a shared GEM LRU+shrinker helper and moves msm over to that - reduce lock contention between retire and submit by avoiding the need to acquire obj lock in retire path (and instead using resv seeing obj's busyness in the shrinker - fix reclaim vs submit issues - GEM fault injection for triggering userspace error paths - Map/unmap optimization - Improved robustness for a6xx GPU recovery virtio: - improve error and edge conditions handling - convert to use managed helpers - stop exposing LINEAR modifier mgag200: - split modeset handling per model udl: - suspend/disconnect handling improvements vc4: - rework HDMI power up - depend on PM - better unplugging support ast: - resolution handling improvements ingenic: - add JZ4760(B) support - avoid a modeset when sharpness property is unchanged - use the new PM ops it6505: - power seq and clock updates ssd130x: - regmap bulk write - use atomic helpers instead of simple helpers via: - rename via_drv to via_dri1, consolidate all code. radeon: - drop DP MST experimental support - delayed work flush fix - use time_after ti-sn65dsi86: - DP support mediatek: - MT8195 DP support - drop of_gpio header - remove unneeded result - small DP code improvements vkms: - RGB565, XRGB64 and ARGB64 support sun4i: - tv: convert to atomic rcar-du: - Synopsys DW HDMI bridge DT bindings update exynos: - use drm_display_info.is_hdmi - correct return of mixer_mode_valid and hdmi_mode_valid omap: - refcounting fix rockchip: - RK3568 support - RK3399 gamma support" * tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits) drm/amdkfd: Fix UBSAN shift-out-of-bounds warning drm/amdkfd: Track unified memory when switching xnack mode drm/amdgpu: Enable sram on vcn_4_0_2 drm/amdgpu: Enable VCN DPG for GC11_0_1 drm/msm: Fix build break with recent mm tree drm/panel: simple: Use dev_err_probe() to simplify code drm/panel: panel-edp: Use dev_err_probe() to simplify code drm/panel: simple: Add Multi-Inno Technology MI0800FT-9 dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel drm/amdgpu: correct the memcpy size for ip discovery firmware drm/amdgpu: Skip put_reset_domain if it doesn't exist drm/amdgpu: remove switch from amdgpu_gmc_noretry_set drm/amdgpu: Fix mc_umc_status used uninitialized warning drm/amd/display: Prevent OTG shutdown during PSR SU drm/amdgpu: add page retirement handling for CPU RAS drm/amdgpu: use RAS error address convert api in mca notifier drm/amdgpu: support to convert dedicated umc mca address drm/amdgpu: export umc error address convert interface drm/amdgpu: fix sdma v4 init microcode error drm/amd/display: fix array-bounds error in dc_stream_remove_writeback() ...
2022-10-04Merge tag 'i2c-for-6.1-rc1' of ↵Linus Torvalds10-29/+10
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - 'remove' callback converted to return void. Big change with trivial fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. - new driver for Microchip PCI1xxxx switch - heavy refactoring of the Mellanox BlueField driver - we prefer async probe in the i801 driver now - the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) * tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: pci1xxxx: prevent signed integer overflow i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper i2c: i801: Prefer async probe i2c: designware-pci: Use standard pattern for memory allocation i2c: designware-pci: Group AMD NAVI quirk parts together i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED i2c: mlxbf: remove device tree support i2c: mlxbf: support BlueField-3 SoC i2c: cadence: Add standard bus recovery support i2c: mlxbf: add multi slave functionality i2c: mlxbf: support lock mechanism macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change i2c: riic: Use devm_platform_ioremap_resource() i2c: mlxbf: remove IRQF_ONESHOT dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support i2c: tegra: Add GPCDMA support i2c: scmi: Convert to be a platform driver i2c: rk3x: Add rv1126 support ...
2022-10-04Merge tag 'net-next-6.1' of ↵Linus Torvalds3-13/+16
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...
2022-10-01Merge tag 'media/v6.0-1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - some fixes for the v4l2 ioctl handler logic - a fix for an out of bound access in the DVB videobuf2 handler - three driver fixes (rkvdec, mediatek/vcodek and uvcvideo) * tag 'media/v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: rkvdec: Disable H.264 error detection media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ) media: dvb_vb2: fix possible out of bound access media: v4l2-ioctl.c: fix incorrect error path media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args() media: uvcvideo: Fix InterfaceProtocol for Quanta camera
2022-09-30staging: rtl8192e: Rename variable Bandwidth to avoid CamelCaseYogesh Hegde6-13/+13
Rename variable Bandwidth to bandwidth to avoid CamelCase which is not accepted by checkpatch.pl . Signed-off-by: Yogesh Hegde <yogi.kernel@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/20220928180350.GA82748@zephyrus Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30staging: r8188eu: remove PHY_RFConfig8188E()Michael Straube3-11/+1
The function PHY_RFConfig8188E() is just a wrapper around phy_RF6052_Config_ParaFile(). Remove the wrapper. Signed-off-by: Michael Straube <straube.linux@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20220928083641.8275-3-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30staging: r8188eu: remove PHY_RF6052_Config8188E()Michael Straube3-14/+3
The function PHY_RF6052_Config8188E() is just a wrapper around phy_RF6052_Config_ParaFile(). Remove the wrapper. Signed-off-by: Michael Straube <straube.linux@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20220928083641.8275-2-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30staging: r8188eu: convert ODM_ReadAndConfig_AGC_TAB_1T_8188E() to intMichael Straube4-12/+6
The function ODM_ReadAndConfig_AGC_TAB_1T_8188E() has return type 'enum HAL_STATUS'. Convert the return type to int and use common kernel error logic. Return 0 on success and negative values on failure. The enum HAL_STATUS is unused now and we can remove it. Signed-off-by: Michael Straube <straube.linux@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20220928144323.13164-5-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30staging: r8188eu: convert ODM_ReadAndConfig_PHY_REG_1T_8188E() to intMichael Straube3-7/+6
The function ODM_ReadAndConfig_PHY_REG_1T_8188E() has return type 'enum HAL_STATUS'. Convert the return type to int and use common kernel error logic. Return 0 on success and negative values on failure. The goal is to get rid of enum HAL_STATUS in the end. Signed-off-by: Michael Straube <straube.linux@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20220928144323.13164-4-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30staging: r8188eu: convert ODM_ReadAndConfig_RadioA_1T_8188E() to intMichael Straube3-7/+6
The function ODM_ReadAndConfig_RadioA_1T_8188E() has return type 'enum HAL_STATUS'. Convert the return type to int and use common kernel error logic. Return 0 on success and negative values on failure. The goal is to get rid of enum HAL_STATUS in the end. Signed-off-by: Michael Straube <straube.linux@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20220928144323.13164-3-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30staging: r8188eu: convert ODM_ReadAndConfig_MAC_REG_8188E() to intMichael Straube3-8/+6
The function ODM_ReadAndConfig_MAC_REG_8188E() has return type 'enum HAL_STATUS'. Convert the return type to int and use common kernel error logic. Return 0 on success and negative values on failure. The goal is to get rid of enum HAL_STATUS in the end. Signed-off-by: Michael Straube <straube.linux@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20220928144323.13164-2-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski1-2/+2
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-27staging: rtl8192e: cmdpkt: Use skb_put_data() instead of skb_put/memcpy pairShang XiaoJing1-2/+1
Use skb_put_data() instead of skb_put() and memcpy(), which is shorter and clear. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20220927024220.14044-1-shangxiaojing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-27staging: r8188eu: Use skb_put_data() instead of skb_put/memcpy pairShang XiaoJing1-3/+1
Use skb_put_data() instead of skb_put() and memcpy(), which is shorter and clear. Drop the tmp variable that is not needed any more. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20220927024050.13556-1-shangxiaojing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-27staging: r8188eu: remove hal/odm_RegConfig8188E.cMichael Straube5-72/+50
All remaining functions in hal/odm_RegConfig8188E.c are only used in hal/HalHWImg8188E_BB.c. Make them static and remove the now empty file hal/odm_RegConfig8188E.c and the header odm_RegConfig8188E.h. Signed-off-by: Michael Straube <straube.linux@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20220926173243.8767-4-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-27staging: r8188eu: make odm_ConfigRF_RadioA_8188E() staticMichael Straube3-33/+30
The function odm_ConfigRF_RadioA_8188E() is only used in HalHWImg8188E_RF.c. Make it static. Signed-off-by: Michael Straube <straube.linux@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20220926173243.8767-3-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-27staging: r8188eu: make odm_ConfigMAC_8188E() staticMichael Straube3-7/+5
The function odm_ConfigMAC_8188E() is only used in HalHWImg8188E_MAC.c. Make it static. Signed-off-by: Michael Straube <straube.linux@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20220926173243.8767-2-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-27media: rkvdec: Disable H.264 error detectionNicolas Dufresne1-2/+2
Quite often, the HW get stuck in error condition if a stream error was detected. As documented, the HW should stop immediately and self reset. There is likely a problem or a miss-understanding of the self reset mechanism, as unless we make a long pause, the next command will then report an error even if there is no error in it. Disabling error detection fixes the issue, and let the decoder continue after an error. This patch is safe for backport into older kernels. Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver") Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-26staging: r8188eu: don't check for stop/removal in the blink workerMartin Kaiser1-3/+0
The blink_work function calls either SwLedOff or SwLedOn. These two functions handle bSurpriseRemoved and bDriverStopped. There's no need to check bSurpriseRemoved and bDriverStopped again in the blink worker. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220925140406.112991-3-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: r8188eu: don't check bSurpriseRemoved in SwLedOffMartin Kaiser1-1/+1
The SwLedOff function calls rtw_read8 which in turn calls usb_read. bSurpriseRemoved is checked in usb_read. We don't have to check it again in SwLedOff. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220925140406.112991-2-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: rtl8192e: Remove unused variables ForcedAMSDUMaxSize, ...Philipp Hortmann2-15/+0
Remove unused variables that are may just once written but never read ForcedAMSDUMaxSize, PeerBandwidth, SwBwStep, bIsPeerBcm and bAcceptAddbaReq to avoid CamelCase which is not accepted by checkpatch. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/0f3e63030511f72dbadc0368fd5e2dbd3ff84e07.1664055213.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: rtl8192e: Rename CurrentMPDU..., ForcedAMPDU... and ForcedMPDU...Philipp Hortmann3-10/+10
Rename variable CurrentMPDUDensity to current_mpdu_density, ForcedAMPDUFactor to forced_ampdu_factor and ForcedMPDUDensity to forced_mpdu_density to avoid CamelCase which is not accepted by checkpatch. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/4fb37ad6dab9addccf99a41a861220840c123e9b.1664055213.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: rtl8192e: Rename SelfMimoPs, CurrentOpMode and bForcedShortGIPhilipp Hortmann3-13/+13
Rename variable SelfMimoPs to self_mimo_ps, CurrentOpMode to current_op_mode and bForcedShortGI to forced_short_gi to avoid CamelCase which is not accepted by checkpatch. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/4c59f62a95b9a77711284998b98fbc559b8db813.1664055213.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: rtl8192e: Rename PeerMimoPs, IOTAction and IOTRaFuncPhilipp Hortmann8-48/+48
Rename variable PeerMimoPs to peer_mimo_ps, IOTAction to iot_action and IOTRaFunc to iot_ra_func to avoid CamelCase which is not accepted by checkpatch. Added spaces around '&' as proposed by checkpatch. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/2a8ce7bff9a00fe44c057242cedb27ca91219137.1664055213.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: rtl8192e: Rename RxRe...WinSize, RxReorder... and RxReorderDr...Philipp Hortmann4-9/+9
Rename variable RxReorderWinSize to rx_reorder_win_size, RxReorderPendingTime to rx_reorder_pending_time and RxReorderDropCounter to rx_reorder_drop_counter to avoid CamelCase which is not accepted by checkpatch. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/e09ef6e2edc88e32782202589a9230204b547a9c.1664055213.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: rtl8192e: Rename szRT2RTAggBuffer, bRegRxRe... and bCurRxReo...Philipp Hortmann4-11/+11
Rename variable szRT2RTAggBuffer to sz_rt2rt_agg_buf, bRegRxReorderEnable to reg_rx_reorder_enable and bCurRxReorderEnable to cur_rx_reorder_enable to avoid CamelCase which is not accepted by checkpatch. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/af445e0a80dc8e153a1ba81df99309f19a69d6cb.1664055213.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: rtl8192e: Rename bSwBwInPro..., bRegRT2RTAg... and bCurrentRT...Philipp Hortmann3-18/+18
Rename variable bSwBwInProgress to sw_bw_in_progress, bRegRT2RTAggregation to reg_rt2rt_aggregation and bCurrentRT2RTAggregation to current_rt2rt_aggregation to avoid CamelCase which is not accepted by checkpatch. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/868f9db0e29bd170129f90bdbcc14238a750c440.1664055213.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: rtl8192e: Rename dot11Cur..., bCurTxBW40MHz and bCurrentRT2...Philipp Hortmann7-22/+22
Rename variable dot11CurrentPreambleMode to dot11_current_preamble_mode, bCurTxBW40MHz to cur_tx_bw40mhz and bCurrentRT2RTLongSlotTime to current_rt2rt_long_slot_time to avoid CamelCase which is not accepted by checkpatch. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/97c4f62da9a98b0ddcdaafae68182e3eb47f9a17.1664055213.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: rtl8192e: Rename eRfSleep, eRfPowerStateToSet and RfOffReasonPhilipp Hortmann8-27/+27
Rename variable eRfSleep to rf_sleep, eRfPowerStateToSet to rf_power_state_to_set and RfOffReason to rf_off_reason to avoid CamelCase which is not accepted by checkpatch. Omit the upfront "e" as no RfSleep and RfPowerStateToSet exist and it makes the variables unnecessary long. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/58e21e5cf86270edae93162db2395e6348c9c424.1664055213.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: rtl8192e: Rename eRFPowerState, eRfOff and eRfOnPhilipp Hortmann11-61/+61
Rename variable eRFPowerState to rf_power_state, eRfOff to rf_off and eRfOn to rf_on to avoid CamelCase which is not accepted by checkpatch. Omit the upfront "e" as no RFPowerState, RfOff and RfOn exist and it makes the variables unnecessary long. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/52c676bbaf1f894e30971c5c409b4bcb71c8ef7e.1664055213.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: fwserial: delete the driver.Greg Kroah-Hartman9-3711/+0
In the years since it was added (2012), no one has stepped up to maintain this properly and get it merged into the kernel tree. So remove it as it's obviously not being used. If it is being used, we can easily revert this and take the time to get it out of the staging tree. Link: https://lore.kernel.org/r/20220924105817.808385-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: rtl8192e: fix CamelCase variablesValentin Vidic1-12/+12
Fix checkpatch warnings for variables: LinkCtrlReg, DeviceID, RevisionID, IrqLine. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Link: https://lore.kernel.org/r/20220925123810.2492865-1-vvidic@valentin-vidic.from.hr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-26staging: rtl8192e: Rename Tx_Retry_Count_RegDragan Cvetic2-11/+6
Rename: Current_Tx_Rate_Reg to CURRENT_TX_RATE_REG, Initial_Tx_Rate_Reg to INITIAL_TX_RATE_REG and Tx_Retry_Count_Reg to TX_RETRY_COUNT_REG to avoid CamelCase which is not accepted by checkpatch.pl. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Signed-off-by: Dragan Cvetic <dragan.m.cvetic@gmail.com> Link: https://lore.kernel.org/r/20220924225126.10527-1-dragan.m.cvetic@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24staging: r8188eu: remove two unused enum entriesMartin Kaiser1-3/+0
Both LED_BLINK_StartToBlink and LED_BLINK_RUNTOP in enum LED_STATE_871x are not used in the r8188eu driver. Remove them. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220918175700.215170-7-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24staging: r8188eu: remove duplicate bSurpriseRemoved checkMartin Kaiser1-1/+1
We don't have to check bSurpriseRemoved in the SwLedOn function. SwLedOn calls rtw_read8 which in turn calls usb_read. This function checks bSurpriseRemoved for us. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220918175700.215170-6-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24staging: r8188eu: remove BlinkingLedStateMartin Kaiser2-62/+4
Both bLedOn and BlinkingLedState in struct led_priv store the same information. The boolean bLedOn stores the curent led state while BlinkingLedState stores the next led state to be set during blinking, which is the inverse of the current led state. (The led is either off or blinking, it's never continuously on.) This patch removes BlinkingLedState and uses bLedOn instead. The LED_BLINK_WPS_STOP case in blink_work checked for pLed->BlinkingLedState != RTW_LED_ON. This is true if the next led blinking state is ON, i.e. if the led has just been switched off by blink_work, i.e. if (!pLed->bLedOn). Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220918175700.215170-5-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24staging: r8188eu: remove bLedNoLinkBlinkInProgressMartin Kaiser2-15/+0
Remove the bLedNoLinkBlinkInProgress state variable. Its sole purpose is to block subsequent requests for "no link" blinking when this blinking pattern is already active. It's perfectly safe to restart "no link" blinking. We can remove bLedNoLinkBlinkInProgress and the many places where it's updated. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220918175700.215170-4-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24staging: r8188eu: update status before wps success blinkingMartin Kaiser1-14/+5
Always update the status variables in rtw_led_control when we start blinking to show that wps was successful. The if statements are not necessary. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220918175700.215170-3-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24staging: r8188eu: cancel blink_work during wps stopMartin Kaiser1-15/+12
We can always cancel blink_work during wps_stop. The blinking pattern will be updated to show that wps was successful. Another worker will be started for this. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220918175700.215170-2-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24staging: r8188eu: Fix return type of rtw_xmit_entryNathan Huckleberry2-3/+3
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of rtw_xmit_entry should be changed from int to netdev_tx_t. Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Reported-by: Dan Carpenter <error27@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nathan Huckleberry <nhuck@google.com> Link: https://lore.kernel.org/r/20220914211606.423959-1-nhuck@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24staging: r8188eu: fix potential memory leak in _rtw_init_xmit_priv()Xiaoke Wang1-6/+24
In _rtw_init_xmit_priv(), there are several error paths for allocation failures just jump to the `exit` section. However, there is no action will be performed, so the allocated resources are not properly released, which leads to various memory leaks. To properly release them, this patch unifies the error handling code and several error handling paths are added. According to the allocation sequence, if the validation fails, it will jump to its corresponding error tag to release the resources. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com> Link: https://lore.kernel.org/r/tencent_DB57E4F270F4539485C32B05FDAF8394310A@qq.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24staging: r8188eu: add kfree() on an error path of rtw_xmit_resource_alloc()Xiaoke Wang1-1/+3
In rtw_xmit_resource_alloc(), if usb_alloc_urb() fails, then the memory `pxmitbuf->pallocated_buf` which is allocated by kzalloc() is not properly released before returning. So this patch adds kfree() on the above error path to release it in time. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Reviewed-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com> Link: https://lore.kernel.org/r/tencent_3B46EE3287288555389AD2EC3F388827B306@qq.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24staging: r8188eu: remove recv_osdep.hMichael Straube14-29/+6
The functions _rtw_init_recv_priv(), _rtw_free_recv_priv() and rtw_recv_entry() are defined in rtw_recv.c. Move their prototypes from recv_osdep.h to rtw_recv.h. Move the last two remaining prototypes netdev_open() and netdev_close() from recv_osdep.h to osdep_intf.h. That is a more appropriate place and we can remove recv_osdep.h. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20220911174933.3784-4-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24staging: r8188eu: remove unused prototypes from recv_osdep.hMichael Straube1-4/+0
The function prototypes rtw_recv_returnpacket(), rtw_init_recv_priv() and rtw_free_recv_priv() are not used. Remove them. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20220911174933.3784-3-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24staging: r8188eu: make _netdev_open() staticMichael Straube2-2/+1
The function _netdev_open() is only used in os_intfs.c. Make it static. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20220911174933.3784-2-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 02:28:46 +0000