summaryrefslogtreecommitdiffstats
path: root/drivers/staging
AgeCommit message (Collapse)AuthorFilesLines
2011-02-10Merge branch 'staging-linus' of ↵Linus Torvalds14-6/+62
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: staging: zram: fix data corruption issue Staging: Comedi: Fix a few NI module dependencies Staging: comedi: Add MODULE_LICENSE and similar to NI modules staging: brcm80211: bugfix for softmac crash on multi cpu configurations staging: sst: Fix for dmic capture on v2 pmic staging: hv: Enable sending GARP packet after live migration
2011-02-09staging: zram: fix data corruption issueNitin Gupta1-0/+4
In zram_read() and zram_write() we were not incrementing the index number and thus were reading/writing values from/to incorrect sectors on zram disk, resulting in data corruption. Signed-off-by: Nitin Gupta <ngupta@vflare.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-09Staging: Comedi: Fix a few NI module dependenciesIan Abbott1-1/+4
The ni_tio and ni_tio modules do not depend on the 8255 module, but the ni_atmio, ni_mio_cs and ni_pcimio modules do need the 8255 module. The ni_pcimio module also needs the comedi_fc module. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-09Staging: comedi: Add MODULE_LICENSE and similar to NI modulesIan Abbott7-2/+24
As mentioned by W. Trevor King on the devel@linuxdriverproject.org list on "Thu, 27 Jan 2011 18:52:15 -0500", "Message-ID: <20110127235214.GA5107@thialfi.dhcp.drexel.edu>", the ni_pcimio module is missing module metadata, including a license. This patch adds module metadata to all the NI comedi driver modules. It also removes a duplicate MODULE_LICENSE("GPL") line from the "mite" module. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: W. Trevor King <wking@drexel.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02Merge branch 'media_fixes' of ↵Linus Torvalds1-6/+26
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] fix saa7111 non-detection [media] rc/streamzap: fix reporting response times [media] mceusb: really fix remaining keybounce issues [media] rc: use time unit conversion macros correctly [media] rc/ir-lirc-codec: add back debug spew [media] ir-kbd-i2c: improve remote behavior with z8 behind usb [media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send [media] hdpvr: fix up i2c device registration [media] rc/mce: add mappings for missing keys [media] gspca - zc3xx: Discard the partial frames [media] gspca - zc3xx: Fix bad images with the sensor hv7131r [media] gspca - zc3xx: Bad delay when given by a table
2011-02-02staging: brcm80211: bugfix for softmac crash on multi cpu configurationsRoland Vossen3-2/+25
Solved a locking issue that resulted in driver crashes with the 43224 and 43225 chips. The problem has been reported on several fora. Root cause was two fold: hardware was being manipulated by two unsynchronized threads, and a scan operation could interfere with an ongoing dynamic calibration process. Fix was to invoke a lock on wl_ops_config() operation and to set internal flags when a scan operation is started and stopped. Please add this to the staging-linus branch. Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Roland Vossen <rvossen@broadcom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02staging: sst: Fix for dmic capture on v2 pmicHarsha Priya1-1/+4
currently capture through dmic captures only silence This patch configurs the dmic registers to capture properly Signed-off-by: Harsha Priya <priya.harsha@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-02staging: hv: Enable sending GARP packet after live migrationHaiyang Zhang1-0/+1
The hv_netvsc gets RNDIS_STATUS_MEDIA_CONNECT event after the VM is live migrated. Adding call to netif_notify_peers() for this event to send GARP (Gratuitous ARP) to notify network peers. Otherwise, the VM's network connection may stop after a live migration. This patch should also be applied to stable kernel 2.6.32 and later. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-01Merge branch 'staging-linus' of ↵Linus Torvalds27-134/+294
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits) staging: r8712u: Add new device IDs staging: brcm80211: fix suspend/resume issue in brcmsmac staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel Staging: iio: Aditional fixpoint formatted output bugfix staging: usbip: vhci: use urb->dev->portnum to find port staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO staging: usbip: vhci: friendly log messages for connection errors staging: usbip: vhci: refuse to enqueue for dead connections staging: usbip: vhci: give back URBs from in-flight unlink requests staging: usbip: vhci: update reference count for usb_device staging: usbip: stub: update refcounts for devices and interfaces staging: tidspbridge: replace mbox callback with notifier_call staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card Staging: speakup: &&/|| confusion in silent_store() iio: Fixpoint formatted output bugfix staging: rt2860: Fix incorrect netif_stop_queue usage warning staging: r8712u: Fix memory leak in firmware loading staging: tidspbridge: configure full L1 MMU range staging: rt2870sta: Add ID for Linksys WUSB100v2 Staging: xgfib: put parenthesis in the right place ...
2011-01-31[media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_sendJarod Wilson1-6/+26
Both the HD-PVR and HVR-1950, driven by the hdpvr and pvrusb2 drivers respectively, have a zilog z8 chip exposed via i2c. These are both usb-connected devices, and on both of them, back-to-back i2c_master_send calls that work fine with a z8 on a pci card fail with a -EIO, as the chip isn't yet ready from the prior command. To cope with that, add a delay and retry loop where necessary. Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31Merge branch 'zerolen' of ↵Linus Torvalds1-0/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: Delete zero-length drivers/staging/vme/bridges/Module.symvers
2011-01-28Delete zero-length drivers/staging/vme/bridges/Module.symversJeff Garzik1-0/+0
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-01-26console: rename acquire/release_console_sem() to console_lock/unlock()Torben Hohn3-13/+13
The -rt patches change the console_semaphore to console_mutex. As a result, a quite large chunk of the patches changes all acquire/release_console_sem() to acquire/release_console_mutex() This commit makes things use more neutral function names which dont make implications about the underlying lock. The only real change is the return value of console_trylock which is inverted from try_acquire_console_sem() This patch also paves the way to switching console_sem from a semaphore to a mutex. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert] Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: Thomas Gleixner <tglx@tglx.de> Cc: Greg KH <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-25staging: r8712u: Add new device IDsAxel Köllhofer1-32/+113
This patch adds several new device ids to the r8712u staging driver. The new ids were retrieved from latest vendor driver (v2.6.6.0.20101111) downloadable from www.realtek.com.tw Signed-off-by: Axel Koellhofer <AxelKoellhofer@web.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [2.6.37] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22staging: brcm80211: fix suspend/resume issue in brcmsmacArend van Spriel1-22/+23
PCI PM suspend callback took down the interface and resume brought it back up. In the mac80211 context this is done in subsequent calls. Rework implementation so that suspend only stores config, and sets PCI power state. The resume return to full power state (D0), restores the config, and brings hardware back up. Full bringup is done by subsequent mac80211 calls. Reviewed-by: Brett Rudley <brudley@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22staging: brcm80211: remove assert to avoid panic since 2.6.37 kernelArend van Spriel1-1/+0
The driver assumed it would receive skb packets from MAC80211 which are not cloned. To guard this assumption an assert was placed in the transmit routine. As of kernel 2.6.37 it turns out MAC80211 does pass skb packets that are cloned. The assert is also not needed as it does not lead to a failure state in our driver when the packet is cloned. Therefore the assert can safely be removed. > commit f8a0a781488ec7288d1049e5d2022850aa98f7b6 > Author: Felix Fietkau <nbd@openwrt.org> > Date: Sat Dec 18 19:30:50 2010 +0100 > > mac80211: fix potentially redundant skb data copying > > When an skb is shared, it needs to be duplicated, along with its data > If the skb does not have enough headroom, using skb_copy might cause t > buffer to be copied twice (once by skb_copy and once by pskb_expand_he > Fix this by using skb_clone initially and letting ieee80211_skb_resize > out the rest. > > Signed-off-by: Felix Fietkau <nbd@openwrt.org> > Signed-off-by: John W. Linville <linville@tuxdriver.com> > Acked-by: Brett Rudley <brudley@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22Staging: iio: Aditional fixpoint formatted output bugfixRoland Stigge2-2/+2
iio: Additional fixpoint formatted output bugfixes Fix some ADC/DAC drivers' _scale interface to correct fixpoint formatted output This patch adds the fixes to ad7887_core.c and ad5446.c Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: usbip: vhci: use urb->dev->portnum to find portMax Vozeler2-6/+1
The access to pending_port was racy when two devices were being attached at the same time. Signed-off-by: Max Vozeler <max@vozeler.com> Tested-by: Mark Wehby <MWehby@luxotticaRetail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEOMax Vozeler1-1/+20
If there is a receive timeout without any active requests, we can tell the connection was idle and ignore the timeout. If there are active requests for which we expect to receive a reply we close the connection. This makes it possible to set an upper bound on the time a usbip device may be unresponsive. This is a workaround for the lack of heart-beat messages in the USBIP protocol. Extending the protocol would break compatibility with all previous stub versions, so this seems like the lesser evil. Signed-off-by: Max Vozeler <max@vozeler.com> Tested-by: Mark Wehby <MWehby@luxotticaRetail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: usbip: vhci: friendly log messages for connection errorsMax Vozeler1-2/+14
Also changes the event on connection close to be VDEV_EVENT_DOWN - no functional change. Signed-off-by: Max Vozeler <max@vozeler.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: usbip: vhci: refuse to enqueue for dead connectionsMax Vozeler1-2/+13
There can be requests to enqueue URBs while we are shutting down a connection. Signed-off-by: Max Vozeler <max@vozeler.com> Tested-by: Mark Wehby <MWehby@luxotticaRetail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: usbip: vhci: give back URBs from in-flight unlink requestsMax Vozeler3-7/+35
If we never received a RET_UNLINK because the TCP connection broke the pending URBs still need to be unlinked and given back. Previously processes would be stuck trying to kill the URB even after the device was detached. Signed-off-by: Max Vozeler <max@vozeler.com> Tested-by: Mark Wehby <MWehby@luxotticaRetail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: usbip: vhci: update reference count for usb_deviceMax Vozeler1-3/+10
This fixes an oops observed when reading status during removal of a device: [ 1706.648285] general protection fault: 0000 [#1] SMP [ 1706.648294] last sysfs file: /sys/devices/platform/vhci_hcd/status [ 1706.648297] CPU 1 [ 1706.648300] Modules linked in: binfmt_misc microcode fuse loop vhci_hcd(N) usbip(N) usbcore usbip_common_mod(N) rtc_core rtc_lib joydev dm_mirror dm_region_hash dm_log linear dm_snapshot xennet dm_mod ext3 mbcache jbd processor thermal_sys hwmon xenblk cdrom [ 1706.648324] Supported: Yes [ 1706.648327] Pid: 10422, comm: usbip Tainted: G N 2.6.32.12-0.7-xen #1 [ 1706.648330] RIP: e030:[<ffffffff801b10d5>] [<ffffffff801b10d5>] strnlen+0x5/0x40 [ 1706.648340] RSP: e02b:ffff8800a994dd30 EFLAGS: 00010286 [ 1706.648343] RAX: ffffffff80481ec1 RBX: 0000000000000000 RCX: 0000000000000002 [ 1706.648347] RDX: 00200d1d4f1c001c RSI: ffffffffffffffff RDI: 00200d1d4f1c001c [ 1706.648350] RBP: ffff880129a1c0aa R08: ffffffffa01901c4 R09: 0000000000000006 [ 1706.648353] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800a9a1c0ab [ 1706.648357] R13: 00200d1d4f1c001c R14: 00000000ffffffff R15: ffff880129a1c0aa [ 1706.648363] FS: 00007f2f2e9ca700(0000) GS:ffff880001018000(0000) knlGS:0000000000000000 [ 1706.648367] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1706.648370] CR2: 000000000071b048 CR3: 00000000b4b68000 CR4: 0000000000002660 [ 1706.648374] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1706.648378] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1706.648381] Process usbip (pid: 10422, threadinfo ffff8800a994c000, task ffff88007b170200) [ 1706.648385] Stack: [ 1706.648387] ffffffff801b28c9 0000000000000002 ffffffffa01901c4 ffff8800a9a1c0ab [ 1706.648391] <0> ffffffffa01901c6 ffff8800a994de08 ffffffff801b339b 0000000000000004 [ 1706.648397] <0> 0000000affffffff ffffffffffffffff 00000000000067c0 0000000000000000 [ 1706.648404] Call Trace: [ 1706.648413] [<ffffffff801b28c9>] string+0x39/0xe0 [ 1706.648419] [<ffffffff801b339b>] vsnprintf+0x1eb/0x620 [ 1706.648423] [<ffffffff801b3813>] sprintf+0x43/0x50 [ 1706.648429] [<ffffffffa018d719>] show_status+0x1b9/0x220 [vhci_hcd] [ 1706.648438] [<ffffffff8024a2b7>] dev_attr_show+0x27/0x60 [ 1706.648445] [<ffffffff80144821>] sysfs_read_file+0x101/0x1d0 [ 1706.648451] [<ffffffff800da4a7>] vfs_read+0xc7/0x130 [ 1706.648457] [<ffffffff800da613>] sys_read+0x53/0xa0 [ 1706.648462] [<ffffffff80007458>] system_call_fastpath+0x16/0x1b [ 1706.648468] [<00007f2f2de40f30>] 0x7f2f2de40f30 [ 1706.648470] Code: 66 0f 1f 44 00 00 48 83 c2 01 80 3a 00 75 f7 48 89 d0 48 29 f8 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 85 f6 74 29 <80> 3f 00 74 24 48 8d 56 ff 48 89 f8 eb 0e 0f 1f 44 00 00 48 83 [ 1706.648507] RIP [<ffffffff801b10d5>] strnlen+0x5/0x40 [ 1706.648511] RSP <ffff8800a994dd30> [ 1706.649575] ---[ end trace b4eb72bf2e149593 ]--- Signed-off-by: Max Vozeler <max@vozeler.com> Tested-by: Mark Wehby <MWehby@luxotticaRetail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: usbip: stub: update refcounts for devices and interfacesMax Vozeler3-6/+17
The stub driver expects to access the usb interface and usb device structures even if the device has been disconnected in the meantime. This change gets a reference to them in the stub probe function using usb_get_intf()/usb_get_dev() and drops them in the disconnect function. This fixes an oops observed with a Logic Controls Line display (0fa8:a030) which disconnects itself when it is reset: [ 1348.562274] BUG: unable to handle kernel paging request at 5f7433e5 [ 1348.562327] IP: [<c0393b02>] usb_lock_device_for_reset+0x22/0xd0 [ 1348.562374] *pde = 00000000 [ 1348.562397] Oops: 0000 [#1] [ 1348.562418] last sysfs file: /sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/bConfigurationValue [ 1348.562454] Modules linked in: usbip vhci_hcd usbip_common_mod fbcon tileblit font bitblit softcursor serio_raw uvesafb pcspkr via_rng snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_timer snd_seq_device snd usbhid hid via_rhine soundcore mii igel_flash aufs pata_via [ 1348.562649] [ 1348.562670] Pid: 2855, comm: usbip_eh Not tainted (2.6.32 #23.37-ud-r113) M300C [ 1348.562704] EIP: 0060:[<c0393b02>] EFLAGS: 00010216 CPU: 0 [ 1348.562734] EIP is at usb_lock_device_for_reset+0x22/0xd0 [ 1348.562762] EAX: 5f7433cd EBX: 5f7433cd ECX: de293a5c EDX: dd326a00 [ 1348.562793] ESI: 5f7433cd EDI: 000400f6 EBP: cf43ff48 ESP: cf43ff38 [ 1348.562824] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 1348.562854] Process usbip_eh (pid: 2855, ti=cf43e000 task=d2c7f230 task.ti=cf43e000) [ 1348.562884] Stack: [ 1348.562900] d6ec9960 de2939cc 5f7433cd 5f743431 cf43ff70 df8fd32f de2939cc d2c7f230 [ 1348.562940] <0> cf43ff70 00000282 00000282 de2939cc d2c7f230 d2c7f230 cf43ffa8 df84416d [ 1348.562987] <0> cf43ff88 d2c7f230 de293a24 d2c7f230 00000000 d2c7f230 c014e760 cf43ff94 [ 1348.563042] Call Trace: [ 1348.563073] [<df8fd32f>] ? stub_device_reset+0x3f/0x110 [usbip] [ 1348.563114] [<df84416d>] ? event_handler_loop+0xcd/0xe8 [usbip_common_mod] [ 1348.563156] [<c014e760>] ? autoremove_wake_function+0x0/0x50 [ 1348.563193] [<df843d80>] ? usbip_thread+0x0/0x60 [usbip_common_mod] [ 1348.563230] [<df843dd1>] ? usbip_thread+0x51/0x60 [usbip_common_mod] [ 1348.563265] [<c014e374>] ? kthread+0x74/0x80 [ 1348.563294] [<c014e300>] ? kthread+0x0/0x80 [ 1348.563326] [<c0103c47>] ? kernel_thread_helper+0x7/0x10 [ 1348.563351] Code: 00 e8 73 4d 00 00 5d c3 90 55 89 e5 83 ec 10 89 5d f4 89 75 f8 89 7d fc 0f 1f 44 00 00 8b 3d c0 2e 67 c0 81 c7 fa 00 00 00 89 c3 <8b> 40 18 89 d6 85 c0 75 15 b8 ed ff ff ff 8b 5d f4 8b 75 f8 8b [ 1348.563528] EIP: [<c0393b02>] usb_lock_device_for_reset+0x22/0xd0 SS:ESP 0068:cf43ff38 [ 1348.563570] CR2: 000000005f7433e5 [ 1348.563593] ---[ end trace 9c3f1e3a2e5299d9 ]--- Signed-off-by: Max Vozeler <max@vozeler.com> Tested-by: Mark Wehby <MWehby@luxotticaRetail.com> Tested-by: Steven Harms <sharms@luxotticaRetail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: tidspbridge: replace mbox callback with notifier_callOmar Ramirez Luna3-21/+18
Lately, mailbox callbacks have been replaced by notifier block call chains, this needs to be changed in the users of mailbox, otherwise compilation will break due to missing parameters. For this new change to work, io_mbox_msg needs to be compatible with the notifier_call definition. Reported-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: comedi: ni_labpc: Use shared IRQ for PCMCIA cardIan Abbott1-1/+2
The ni_labpc driver module only requests a shared IRQ for PCI devices, requesting a non-shared IRQ for non-PCI devices. As this module is also used by the ni_labpc_cs module for certain National Instruments PCMCIA cards, it also needs to request a shared IRQ for PCMCIA devices, otherwise you get a IRQ mismatch with the CardBus controller. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20Staging: speakup: &&/|| confusion in silent_store()roel kluin1-1/+1
Fix test: the branch is always taken. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20iio: Fixpoint formatted output bugfixRoland Stigge2-2/+2
Fix some ADC drivers' _scale interface to correct fixpoint formatted output Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: rt2860: Fix incorrect netif_stop_queue usage warningDenis Kirjanov1-2/+0
The TX queues are allocated inside register_netdev. It doesn't make any sense to stop the queue before allocation. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: r8712u: Fix memory leak in firmware loadingLarry Finger1-4/+7
The error path leaks the firmware struct. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: tidspbridge: configure full L1 MMU rangeGuzman Lugo, Fernando1-4/+1
IVA MMU can manage up to 4GB of address space through its page tables, given that it's L1 is divided into 1MB sections it requires at least 16KB for its table which represents 4096 entries of 32 bits each. Previously, only 1GB was being handled by setting the page table size to 4KB, any virtual address beyond of the L1 size used, would fall into memory that does not belong to L1 translation tables, leading to unpredictable results. So, set the L1 table size to cover the entire MMU range (4GB) whether is meant to be used or not. Reported-by: Felipe Contreras <felipe.contreras@nokia.com> Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com> Signed-off-by: Felipe Contreras <felipe.contreras@nokia.com> Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: rt2870sta: Add ID for Linksys WUSB100v2Larry Finger1-0/+1
This device was tested with rt2870sta by setting new_id. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Brian Ormond <brian.ormond@oit.edu> Cc: Stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20Staging: xgfib: put parenthesis in the right placeDan Carpenter1-3/+3
In the original code the parenthesis are in the wrong position, so the conditions are always true. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20Staging: ste_rmi4: use after input_unregister_device()Dan Carpenter1-10/+9
The original code called input_free_device(rmi4_data->input_dev) after input_unregister_device(rmi4_data->input_dev) and that's a double free. This is described in the comments to input_unregister_device(). The normal way to handle this is to make input_register_device() the last function in the probe which can fail. That way you can avoid the call to input_unregister_device() entirely. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20Staging: ath6kl: fix potential buffer overflowPhillip Simbwa1-2/+2
Off by one Signed-off-by: Phillip Simbwa <simbwa at gmail dot com> Signed-off-by: Vipin Mehta <vmehta@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: hv: Removed unneeded call to netif_stop_queue() in hv_netvscHank Janssen1-1/+0
Removed the call to netif_stop_queue() in netvsc_probe() as the queue is not initialized at that point and further call to it after queue initialization is really not necessary. This change was prompted after an upstream change went into 2.6.37 (netif_tx_stop_queue) that now checks if netif_stop_queue is called before register with netdev is done. This will eliminate the warning message to the log when hv_netvsc driver starts up. Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20staging: hv: fix netvsc sleeping while atomicTimo Teräs1-1/+1
The channel callbacks are called directly from vmbus_event_dpc which runs in tasklet context. These callbacks need to use GFP_ATOMIC. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16701 Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20Staging: hv: fix sysfs symlink on hv block deviceKy Srinivasan1-0/+1
The block device does not create the proper symlink in sysfs because we forgot to set up the gendisk structure properly. This patch fixes the issue. Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-20Staging: remove unintended Module.symvers fileGreg Kroah-Hartman1-0/+0
commit a82ad05ecd9dbd909509a332d3aa5f4ac439a054 (staging: vme: tsi148: fix warning in free_irq) accidentally added a Module.symvers file to the git tree. This patch removes it, sorry about that. Reported-by: Toralf Förster <toralf.foerster@gmx.de> Cc: Emilio G. Cota <cota@braap.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-19[media] staging/lirc: fix mem leaks and ptr err usageJarod Wilson6-6/+20
When the lirc drivers were converted over to using memdup_user, I mistakenly also removed corresponding calls to kfree. Add those back. I also screwed up on the allocation error check in lirc_serial, using if (PTR_ERR()) instead of if (IS_ERR()), which broke transmit. Reported-by: Jiri Fojtasek <jiri.fojtasek@hlohovec.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Update TODO.lirc_zilogAndy Walls1-6/+30
Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Add Andy Walls to copyright notice and authors listAndy Walls1-1/+5
Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Remove useless struct i2c_driver.command functionAndy Walls1-8/+0
The ir_command() function is a do-nothing stub; remove it. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Remove unneeded tests for existence of the IR Tx functionAndy Walls1-16/+5
The driver is now structured so that it must handle an IR Tx unit for a Z8 IR chip, or it refuses to handle that Z8 IR chip. This allows us to assume that ir->tx != NULL in a few places in the driver, and also allows us to always report Tx is available to userspace. Get rid of unneeded tests for ir->tx == NULL and always report that Tx is available. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Update IR Rx polling kthread start/stop and some printksAndy Walls1-64/+49
The IR Rx polling thread was originally a kernel_thread long ago, and had only been minimally converted to a kthread. This patch finishes that conversion by - cleaning up all the unneeded completions - destroying the kthread properly by calling kthread_stop() - changing lirc_thread() to test kthread_should_stop() just before every point where it may sleep - reorganizing the lirc_thread() function so it uses fewer lines - modifying the name of the kthread from "lirc_zilog" to "zilog-rx-i2c-N", so ps will show which kthread polls which Zilog Z8 IR unit. Also some minor tweaks were made to logging emitted by the ir_probe() function. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Extensive rework of ir_probe()/ir_remove()Andy Walls1-132/+212
This patch is an extensive rework of the ir_probe() and ir_remove() functions. It removes all the double binding and allocation problems on module load. It removes almost all the memory leaks on module exit and on device instantiation failure. Proper destruction of the Rx polling kthread still needs investigation and more work, but it is no worse than it already was. This rework also had side effects that include: - encapsulation of the ir_devices[] array - serialization of access to the ir_devices[] array - semantic change of the module parameter "disable_rx" to "tx_only" If tx_only is true, the module does not claim the i2c_client for the IR Rx function, and only claims and handles the i2c_client for the IR Tx function. This is a first step in providing the option of letting ir-kbd-i2c.c handle IR Rx function, while lirc_zilog handles the IR Tx function. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Don't make private copies of i2c clientsAndy Walls1-59/+28
Don't make private copies of the i2c clients provided by the I2C subsystem, don't change the client address field, and don't probe the client addresses - the bridge driver already did that. This moves us to the proper I2C and binding model. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Split struct IR into structs IR, IR_tx, and IR_rxAndy Walls1-127/+171
This change is a mostly mechanical break of the main struct IR data structure into common, Rx, and Tx structures. There were some small logical changes required as well, such as eliminating "is_hdpvr", to accomplish this. This change is an intiial step in reworking lirc_zilog to decouple the Rx and Tx handling as much as possible to fit with the new I2C binding model. This change actually makes lirc_zilog a little more broken than it already was - memory deallocation in particular got worse. However, this change makes the remaining problems easier to see and address. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Remove disable_tx module parameterAndy Walls1-10/+4
The only reason to use the lirc_zilog module is for IR Tx, so remove the possibility of disabling IR Tx. If the user needs only IR Rx, then the ir-kbd-i2c module works just fine, and doesn't require a "firmware" image. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] lirc_zilog: Reword debug message in ir_probe()Andy Walls1-3/+2
Jean Delvare <khali@linux-fr.org> suggested this better format for debug output in ir_probe(). Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 01:14:20 +0000