summaryrefslogtreecommitdiffstats
path: root/drivers/staging
AgeCommit message (Collapse)AuthorFilesLines
2020-05-15Merge tag 'iio-fixes-for-5.7b' of ↵Greg Kroah-Hartman1-5/+12
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: iio-fixes-for-5.7b Second set of fixes for IIO in the 5.7 cycle. Usual mixed bag of breakage in new code and ancient bugs. ad2s1210 - Fix missing CS change needed to actually read anything. atlas-sensor - Avoid clashing scan index with the timestamp channel. sca3000 - Fix a randomly placed get_device in an error message print. st_lsm6dsx - Fix missing unlock in error path. stm32-adc - Fix which device is used to request DMA to ensure it's one that has actually been registered at point of use. stm32-dfsdm - Fix which device is used to request DMA to ensure it's one that has actually been registered at poitn of use. ti-ads8344 - Fix channel selection. vf610 dac - Fix some missing error handling code. * tag 'iio-fixes-for-5.7b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: sca3000: Remove an erroneous 'get_device()' iio: adc: stm32-dfsdm: fix device used to request dma iio: adc: stm32-adc: fix device used to request dma iio: adc: ti-ads8344: Fix channel selection staging: iio: ad2s1210: Fix SPI reading iio: dac: vf610: Fix an error handling path in 'vf610_dac_probe()' iio: imu: st_lsm6dsx: unlock on error in st_lsm6dsx_shub_write_raw() iio: chemical: atlas-sensor: correct DO-SM channels
2020-05-13staging: wfx: unlock on error pathDan Carpenter1-1/+3
We need to release the tx_lock on the error path before returning. Fixes: d1c015b4ef6f ("staging: wfx: rewrite wfx_hw_scan()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200512083656.GA251760@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-13staging: greybus: Fix uninitialized scalar variableOscar Carter1-2/+2
In the "gb_tty_set_termios" function the "newline" variable is declared but not initialized. So the "flow_control" member is not initialized and the OR / AND operations with itself results in an undefined value in this member. The purpose of the code is to set the flow control type, so remove the OR / AND self operator and set the value directly. Addresses-Coverity-ID: 1374016 ("Uninitialized scalar variable") Fixes: e55c25206d5c9 ("greybus: uart: Handle CRTSCTS flag in termios") Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200510101426.23631-1-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-13staging: kpc2000: fix error return code in kp2000_pcie_probe()Wei Yongjun1-5/+4
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Also removed var 'rv' since we can use 'err' instead. Fixes: 7dc7967fc39a ("staging: kpc2000: add initial set of Daktronics drivers") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200506134735.102041-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05staging: gasket: Check the return value of gasket_get_bar_index()Oscar Carter1-0/+4
Check the return value of gasket_get_bar_index function as it can return a negative one (-EINVAL). If this happens, a negative index is used in the "gasket_dev->bar_data" array. Addresses-Coverity-ID: 1438542 ("Negative array index read") Fixes: 9a69f5087ccc2 ("drivers/staging: Gasket driver framework + Apex driver") Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Richard Yeh <rcy@google.com> Link: https://lore.kernel.org/r/20200501155118.13380-1-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-05staging: ks7010: remove me from CC listWolfram Sang1-1/+0
I lost interest in this driver years ago because I could't keep up with testing the incoming janitorial patches. So, drop me from CC. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Link: https://lore.kernel.org/r/20200502112648.6942-1-wsa@the-dreams.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-03staging: iio: ad2s1210: Fix SPI readingDragos Bogdan1-5/+12
If the serial interface is used, the 8-bit address should be latched using the rising edge of the WR/FSYNC signal. This basically means that a CS change is required between the first byte sent, and the second one. This change splits the single-transfer transfer of 2 bytes into 2 transfers with a single byte, and CS change in-between. Note fixes tag is not accurate, but reflects a point beyond which there are too many refactors to make backporting straight forward. Fixes: b19e9ad5e2cb ("staging:iio:resolver:ad2s1210 general driver cleanup.") Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-26Merge tag 'staging-5.7-rc3' of ↵Linus Torvalds7-33/+29
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver fixes from Greg KH: "Here are some small staging and IIO driver fixes for 5.7-rc3 Lots of tiny things for reported issues in staging and IIO drivers, including a counter driver fix as well (the iio drivers seem to be tied to those). Full details of the fixes are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (27 commits) staging: vt6656: Fix calling conditions of vnt_set_bss_mode staging: comedi: Fix comedi_device refcnt leak in comedi_open staging: vt6656: Fix pairwise key entry save. staging: vt6656: Fix drivers TBTT timing counter. staging: vt6656: Don't set RCR_MULTICAST or RCR_BROADCAST by default. MAINTAINERS: remove Stefan Popa's email iio: adc: ad7192: fix null pointer de-reference crash during probe iio: core: remove extra semi-colon from devm_iio_device_register() macro iio: adc: ti-ads8344: properly byte swap value iio: imu: inv_mpu6050: fix suspend/resume with runtime power iio: st_sensors: rely on odr mask to know if odr can be set iio: xilinx-xadc: Make sure not exceed maximum samplerate iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode iio: xilinx-xadc: Fix clearing interrupt when enabling trigger iio: xilinx-xadc: Fix ADC-B powerdown iio: dac: ad5770r: fix off-by-one check on maximum number of channels iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device iio: core: Fix handling of 'dB' dt-bindings: iio: adc: stm32-adc: fix id relative path counter: 104-quad-8: Add lock guards - generic interface ...
2020-04-23staging: vt6656: Fix calling conditions of vnt_set_bss_modeMalcolm Priestley1-4/+4
vnt_set_bss_mode needs to be called on all changes to BSS_CHANGED_BASIC_RATES, BSS_CHANGED_ERP_PREAMBLE and BSS_CHANGED_ERP_SLOT Remove all other calls and vnt_update_ifs which is called in vnt_set_bss_mode. Fixes an issue that preamble mode is not being updated correctly. Fixes: c12603576e06 ("staging: vt6656: Only call vnt_set_bss_mode on basic rates change.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/44110801-6234-50d8-c583-9388f04b486c@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23staging: comedi: Fix comedi_device refcnt leak in comedi_openXiyu Yang1-1/+3
comedi_open() invokes comedi_dev_get_from_minor(), which returns a reference of the COMEDI device to "dev" with increased refcount. When comedi_open() returns, "dev" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of comedi_open(). When "cfp" allocation is failed, the refcnt increased by comedi_dev_get_from_minor() is not decreased, causing a refcnt leak. Fix this issue by calling comedi_dev_put() on this error path when "cfp" allocation is failed. Fixes: 20f083c07565 ("staging: comedi: prepare support for per-file read and write subdevices") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/1587361459-83622-1-git-send-email-xiyuyang19@fudan.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23staging: vt6656: Fix pairwise key entry save.Malcolm Priestley2-12/+8
The problem is that the group key was saved as VNT_KEY_DEFAULTKEY was over written by the VNT_KEY_GROUP_ADDRESS index. mac80211 could not clear the mac_addr in the default key. The VNT_KEY_DEFAULTKEY is not necesscary so remove it and set as VNT_KEY_GROUP_ADDRESS. mac80211 can clear any key using vnt_mac_disable_keyentry. Fixes: f9ef05ce13e4 ("staging: vt6656: Fix pairwise key for non station modes") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/da2f7e7f-1658-1320-6eee-0f55770ca391@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23staging: vt6656: Fix drivers TBTT timing counter.Malcolm Priestley1-3/+6
The drivers TBTT counter is not synchronized with mac80211 timestamp. Reorder the functions and use vnt_update_next_tbtt to do the final synchronize. Fixes: c15158797df6 ("staging: vt6656: implement TSF counter") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/375d0b25-e8bc-c8f7-9b10-6cc705d486ee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23staging: vt6656: Don't set RCR_MULTICAST or RCR_BROADCAST by default.Malcolm Priestley1-6/+2
mac80211/users control whether multicast is on or off don't enable it by default. Fixes an issue when multicast/broadcast is always on allowing other beacons through in power save. Fixes: db8f37fa3355 ("staging: vt6656: mac80211 conversion: main_usb add functions...") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/2c24c33d-68c4-f343-bd62-105422418eac@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: vt6656: Power save stop wake_up_count wrap around.Malcolm Priestley1-1/+2
conf.listen_interval can sometimes be zero causing wake_up_count to wrap around up to many beacons too late causing CTRL-EVENT-BEACON-LOSS as in. wpa_supplicant[795]: message repeated 45 times: [..CTRL-EVENT-BEACON-LOSS ] Fixes: 43c93d9bf5e2 ("staging: vt6656: implement power saving code.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/fce47bb5-7ca6-7671-5094-5c6107302f2b@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-14PCI: Move Apex Edge TPU class quirk to fix BAR assignmentBjorn Helgaas1-7/+0
Some Google Apex Edge TPU devices have a class code of 0 (PCI_CLASS_NOT_DEFINED). This prevents the PCI core from assigning resources for the Apex BARs because __dev_sort_resources() ignores classless devices, host bridges, and IOAPICs. On x86, firmware typically assigns those resources, so this was not a problem. But on some architectures, firmware does *not* assign BARs, and since the PCI core didn't do it either, the Apex device didn't work correctly: apex 0000:01:00.0: can't enable device: BAR 0 [mem 0x00000000-0x00003fff 64bit pref] not claimed apex 0000:01:00.0: error enabling PCI device f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class") added a quirk to fix the class code, but it was in the apex driver, and if the driver was built as a module, it was too late to help. Move the quirk to the PCI core, where it will always run early enough that the PCI core will assign resources if necessary. Link: https://lore.kernel.org/r/CAEzXK1r0Er039iERnc2KJ4jn7ySNUOG9H=Ha8TD8XroVqiZjgg@mail.gmail.com Fixes: f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Debugged-by: Luís Mendes <luis.p.mendes@gmail.com> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Todd Poynor <toddpoynor@google.com>
2020-04-13staging: comedi: dt2815: fix writing hi byte of analog outputIan Abbott1-0/+3
The DT2815 analog output command is 16 bits wide, consisting of the 12-bit sample value in bits 15 to 4, the channel number in bits 3 to 1, and a voltage or current selector in bit 0. Both bytes of the 16-bit command need to be written in turn to a single 8-bit data register. However, the driver currently only writes the low 8-bits. It is broken and appears to have always been broken. Electronic copies of the DT2815 User's Manual seem impossible to find online, but looking at the source code, a best guess for the sequence the driver intended to use to write the analog output command is as follows: 1. Wait for the status register to read 0x00. 2. Write the low byte of the command to the data register. 3. Wait for the status register to read 0x80. 4. Write the high byte of the command to the data register. Step 4 is missing from the driver. Add step 4 to (hopefully) fix the driver. Also add a "FIXME" comment about setting bit 0 of the low byte of the command. Supposedly, it is used to choose between voltage output and current output, but the current driver always sets it to 1. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200406142015.126982-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13staging: gasket: Fix incongruency in handling of sysfs entries creationLuis Mendes2-6/+1
Fix incongruency in handling of sysfs entries creation. This issue could cause invalid memory accesses, by not properly detecting the end of the sysfs attributes array. Fixes: 84c45d5f3bf1 ("staging: gasket: Replace macro __ATTR with __ATTR_NULL") Signed-off-by: Luis Mendes <luis.p.mendes@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200403151534.20753-1-luis.p.mendes@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-10mm/vma: introduce VM_ACCESS_FLAGSAnshuman Khandual1-1/+1
There are many places where all basic VMA access flags (read, write, exec) are initialized or checked against as a group. One such example is during page fault. Existing vma_is_accessible() wrapper already creates the notion of VMA accessibility as a group access permissions. Hence lets just create VM_ACCESS_FLAGS (VM_READ|VM_WRITE|VM_EXEC) which will not only reduce code duplication but also extend the VMA accessibility concept in general. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Springer <rspringer@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/1583391014-8170-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-03Merge tag 'char-misc-5.7-rc1' of ↵Linus Torvalds2-14/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-03-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-0/+2
Pull networking updates from David Miller: "Highlights: 1) Fix the iwlwifi regression, from Johannes Berg. 2) Support BSS coloring and 802.11 encapsulation offloading in hardware, from John Crispin. 3) Fix some potential Spectre issues in qtnfmac, from Sergey Matyukevich. 4) Add TTL decrement action to openvswitch, from Matteo Croce. 5) Allow paralleization through flow_action setup by not taking the RTNL mutex, from Vlad Buslov. 6) A lot of zero-length array to flexible-array conversions, from Gustavo A. R. Silva. 7) Align XDP statistics names across several drivers for consistency, from Lorenzo Bianconi. 8) Add various pieces of infrastructure for offloading conntrack, and make use of it in mlx5 driver, from Paul Blakey. 9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki. 10) Lots of parallelization improvements during configuration changes in mlxsw driver, from Ido Schimmel. 11) Add support to devlink for generic packet traps, which report packets dropped during ACL processing. And use them in mlxsw driver. From Jiri Pirko. 12) Support bcmgenet on ACPI, from Jeremy Linton. 13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei Starovoitov, and your's truly. 14) Support XDP meta-data in virtio_net, from Yuya Kusakabe. 15) Fix sysfs permissions when network devices change namespaces, from Christian Brauner. 16) Add a flags element to ethtool_ops so that drivers can more simply indicate which coalescing parameters they actually support, and therefore the generic layer can validate the user's ethtool request. Use this in all drivers, from Jakub Kicinski. 17) Offload FIFO qdisc in mlxsw, from Petr Machata. 18) Support UDP sockets in sockmap, from Lorenz Bauer. 19) Fix stretch ACK bugs in several TCP congestion control modules, from Pengcheng Yang. 20) Support virtual functiosn in octeontx2 driver, from Tomasz Duszynski. 21) Add region operations for devlink and use it in ice driver to dump NVM contents, from Jacob Keller. 22) Add support for hw offload of MACSEC, from Antoine Tenart. 23) Add support for BPF programs that can be attached to LSM hooks, from KP Singh. 24) Support for multiple paths, path managers, and counters in MPTCP. From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti, and others. 25) More progress on adding the netlink interface to ethtool, from Michal Kubecek" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits) net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline cxgb4/chcr: nic-tls stats in ethtool net: dsa: fix oops while probing Marvell DSA switches net/bpfilter: remove superfluous testing message net: macb: Fix handling of fixed-link node net: dsa: ksz: Select KSZ protocol tag netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write net: stmmac: add EHL 2.5Gbps PCI info and PCI ID net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID net: stmmac: create dwmac-intel.c to contain all Intel platform net: dsa: bcm_sf2: Support specifying VLAN tag egress rule net: dsa: bcm_sf2: Add support for matching VLAN TCI net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT net: dsa: bcm_sf2: Disable learning for ASP port net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge net: dsa: b53: Prevent tagged VLAN on port 7 for 7278 net: dsa: b53: Restore VLAN entries upon (re)configuration net: dsa: bcm_sf2: Fix overflow checks hv_netvsc: Remove unnecessary round_up for recv_completion_cnt ...
2020-03-30staging/octeon: fix up merge errorRandy Dunlap1-1/+1
There's a semantic conflict in the Octeon staging network driver, which used the skb_reset_tc() function to reset skb state when re-using an skb. But that inline helper function was removed in mainline by commit 2c64605b590e ("net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build"). Fix it by using skb_reset_redirect() instead. Also move it out of the This code path only ends up triggering if REUSE_SKBUFFS_WITHOUT_FREE is enabled, which in turn only happens if you don't have CONFIG_NETFILTER configured. Which was how this wasn't caught by the usual allmodconfig builds. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-30Merge tag 'staging-5.7-rc1' of ↵Linus Torvalds394-50668/+14065
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver updates from Greg KH: "Here is the big staging and IIO driver pull request for 5.7-rc1. We again end up deleting more code than we added here, thanks to finally getting rid of the old and obsolete wireless USB stuff, and the exfat code (which is coming in again through the vfs tree in a much cleaner version). But some code does come back, with the octeon drivers being found to actually be used in the wild, so those deletions are now reverted. Other than those major things, just loads and loads of tiny checkpatch cleanups all over the place, along with new IIO drivers and fixes. All have been in linux-next with no reported issues" [ Stephen Rothwell points out some reported issues due to merge conflicts ] * tag 'staging-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (415 commits) staging: vt6656: Use DIV_ROUND_UP macro instead of specific code staging: remove hp100 driver staging: wilc1000: Use crc7 in lib/ rather than a private copy Staging: rtl8192u: ieee80211: Use netdev_alert(). Staging: rtl8192u: ieee80211: Use netdev_info() with network devices. Staging: rtl8192u: ieee80211: Use netdev_warn() for network devices. Staging: rtl8192u: ieee80211: Use netdev_dbg() for debug messages. staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback staging: rtl8723bs: hal: Remove NULL check before kfree staging: rtl8723bs: hal: Correct typos in comments staging: rtl8723bs: os_dep: Correct typos in comments staging: rtl8723bs: core: Correct typos in comments staging: rtl8723bs: hal: Remove unnecessary cast on void pointer staging: rtl8188eu: cleanup long line in odm.c staging: rtl8723bs: hal: Compress return logic staging: rtl8723bs: rtw_cmd: Compress lines for immediate return staging: rtl8723bs: rtw_efuse: Compress lines for immediate return staging: wilc1000: remove label from examples in DT binding documentation staging: rtl8723bs: Remove blank line before '}' brace Staging: rtl8188eu: hal: Add space around operators ...
2020-03-30Merge tag 'media/v5.7-1' of ↵Linus Torvalds69-701/+11520
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New sensor driver: imx219 - Support for some new pixelformats - Support for Sun8i SoC - Added more codecs to meson vdec driver - Prepare for removing the legacy usbvision driver by moving it to staging. This driver has issues and use legacy core APIs. If nobody steps up to address those, it is time for its retirement. - Several cleanups and improvements on drivers, with the addition of new supported boards * tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits) media: venus: firmware: Ignore secure call error on first resume media: mtk-vpu: load vpu firmware from the new location media: i2c: video-i2c: fix build errors due to 'imply hwmon' media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ media: hantro: add initial i.MX8MQ support media: dt-bindings: Document i.MX8MQ VPU bindings media: vivid: fix incorrect PA assignment to HDMI outputs media: hantro: Add linux-rockchip mailing list to MAINTAINERS media: cedrus: h264: Fix 4K decoding on H6 media: siano: Use scnprintf() for avoiding potential buffer overflow media: rc: Use scnprintf() for avoiding potential buffer overflow media: allegro: create new struct for channel parameters media: allegro: move mail definitions to separate file media: allegro: pass buffers through firmware media: allegro: verify source and destination buffer in VCU response media: allegro: handle dependency of bitrate and bitrate_peak media: allegro: read bitrate mode directly from control media: allegro: make QP configurable media: allegro: make frame rate configurable media: allegro: skip filler data if possible ...
2020-03-27staging: vt6656: Use DIV_ROUND_UP macro instead of specific codeOscar Carter1-17/+4
Use DIV_ROUND_UP macro instead of specific code with the same purpose. Also, remove the unused variables. Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Reviewed-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk> Link: https://lore.kernel.org/r/20200326175902.14467-1-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-27staging: remove hp100 driverGreg Kroah-Hartman6-3672/+0
It's old, obsolete, and no one wants to take care of it anymore. It's been in staging for 5 months with no one paying attention to it, so let's just delete it for now. If someone has this hardware, and wants the driver back, the deletion can be easily reverted. Cc: Joe Perches <joe@perches.com> Cc: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20200326080233.978323-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: wilc1000: Use crc7 in lib/ rather than a private copyGeorge Spelvin2-58/+11
The code in lib/ is the desired polynomial, and even includes the 1-bit left shift in the table rather than needing to code it explicitly. While I'm in Kconfig, add a description of what a WILC1000 is. Kconfig questions that require me to look up a data sheet to find out that I probably don't have one are a pet peeve. Cc: Adham Abozaeid <adham.abozaeid@microchip.com> Cc: linux-wireless@vger.kernel.org Reviewed-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/r/20200326152251.19094-1-ajay.kathat@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_alert().Sam Muhammed1-1/+1
Replace printk(KERN_ALERT ...) with netdev_alert() when a network device is available. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/70e8781cd2a9512cb6b3c42400a10323f3024f3c.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_info() with network devices.Sam Muhammed3-16/+20
netdev_info() should be used instead of printk(KERN_INFO ...) since it's specific to and preferable for printing messages for network devices. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/ce20980cc1947255b8a2de3c1f1364c11c163b9e.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_warn() for network devices.Sam Muhammed3-15/+10
Use netdev_warn() over printk(). netdev_warn() is specific for printing warning messages for network devices, and preferable over printk(KERN_WARNING ...). Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/02fe0666cb737a3b0581081c9e7c179bfb820cac.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_dbg() for debug messages.Sam Muhammed3-14/+12
Replace printk(KERN_DEBUG ...) with netdev_dbg() across the driver. since netdev_dbg() is preferable and specific for printing debug messages for network devices. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/84dc7e33954509457efce2a35fb293e631845a96.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callbackQiujun Huang1-0/+2
We can't handle the case length > WLAN_DATA_MAXLEN. Because the size of rxfrm->data is WLAN_DATA_MAXLEN(2312), and we can't read more than that. Thanks-to: Hillf Danton <hdanton@sina.com> Reported-and-tested-by: syzbot+7d42d68643a35f71ac8a@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200326131850.17711-1-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: hal: Remove NULL check before kfreeSimran Singhal1-8/+4
NULL check before kfree is unnecessary so remove it. The following Coccinelle script was used to detect this: @@ expression E; @@ - if (E != NULL) { kfree(E); } + kfree(E); @@ expression E; @@ - if (E != NULL) { kfree(E); E = NULL; } + kfree(E); + E = NULL; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200326132823.GA18625@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: hal: Correct typos in commentsR Veera Kumar10-13/+13
Correct typos in comments. Misspellings found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200326143023.13681-1-vkor@vkten.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: os_dep: Correct typos in commentsR Veera Kumar2-4/+4
Correct typos in comments. Misspellings found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200326125500.12861-1-vkor@vkten.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: core: Correct typos in commentsR Veera Kumar7-13/+13
Correct typos in comments. Misspellings found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200326123540.12401-1-vkor@vkten.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: hal: Remove unnecessary cast on void pointerSimran Singhal1-1/+1
Assignment to a typed pointer is sufficient in C. No cast is needed. The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200326113210.GA29951@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8188eu: cleanup long line in odm.cMichael Straube1-1/+1
Cleanup line over 80 characters by removing unnecessary test 'pDM_Odm->RSSI_Min <= 25'. The above test 'pDM_Odm->RSSI_Min > 25' already guarantees that it is <= 25. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200326084348.15072-1-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26speakup: misc: Use dynamic minor numbers for speakup devicesZhenzhong Duan2-14/+10
Arnd notes in the link: | To clarify: the only numbers that I think should be changed to dynamic | allocation are for drivers/staging/speakup. While this is a fairly old | subsystem, I would expect that it being staging means we can be a | little more progressive with the changes. This releases misc device minor numbers 25-27 for dynamic usage. Link: https://lore.kernel.org/lkml/20200120221323.GJ15860@mit.edu/t/ Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com> Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200325033008.9633-1-zhenzhong.duan@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: hal: Compress return logicSimran Singhal1-3/+1
Simplify function returns by merging assignment and return into one command line. Found with Coccinelle @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325214312.GA1936@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: rtw_cmd: Compress lines for immediate returnSimran Singhal1-5/+1
Compress two lines into a single line if immediate return statement is found. It also removes variable cmd_obj as it is no longer needed. It is done using script Coccinelle. And coccinelle uses following semantic patch for this compression function: @@ expression ret; identifier f; @@ -ret = +return f(...); -return ret; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325212253.GA8175@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: rtl8723bs: rtw_efuse: Compress lines for immediate returnSimran Singhal1-4/+2
Compress two lines into a single line if immediate return statement is found. It is done using script Coccinelle. And coccinelle uses following semantic patch for this compression function: @@ expression ret; identifier f; @@ -ret = +return f(...); -return ret; Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325205418.GA29149@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26staging: wilc1000: remove label from examples in DT binding documentationAjay Singh1-3/+2
Remove labels and not relevant property from DT binding documentation examples as suggested in [1]. 1. https://patchwork.ozlabs.org/patch/1252837 Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Link: https://lore.kernel.org/r/20200325164234.14146-1-ajay.kathat@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller7-34/+47
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25staging: rtl8723bs: Remove blank line before '}' braceSimran Singhal1-8/+0
Remove unneeded blank line before a close brace '}'. Issue found by checkpatch.pl: CHECK: Blank lines aren't necessary before a close brace '}' Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325182617.GA9411@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: rtl8188eu: hal: Add space around operatorsShreeya Patel11-224/+224
Add space around operators for improving the code readability. Reported by checkpatch.pl git diff -w shows no difference. diff of the .o files before and after the changes shows no difference. Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com> Link: https://lore.kernel.org/r/20200325160142.3698-1-shreeya.patel23498@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Use spaces around operators.Sam Muhammed1-7/+7
Cleanup Checkpatch.pl CHECKs about missing spaces around multiple operators. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/22025abc8f8f3452c2d886e8faf1fe0532e8bb1d.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Use kcalloc over kzalloc.Sam Muhammed1-1/+2
Replace kzalloc(sizeof(...) * n, ...) with kcalloc(n, sizeof(...), ...) since kcalloc is the preferred API in case of allocating with multiply. Checkpatch.pl: WARNING: Prefer kcalloc over kzalloc with multiply. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/4b8339d1e81e497c3c2f0dad57a9587338ec82b1.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Use the SPDK comment style.Sam Muhammed3-3/+3
SPDK-License-Identifier comment should have this form // SPDX-License-Identifier: <GPL-...> Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/7531e3e3fa7c046e93d2caaa6fa2e76c5c53f04d.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Include the preferred header.Sam Muhammed1-1/+1
<linux/io.h> is the preferred header to include instead of <asm/io.h>. Checkpatch.pl WARNING: Use #include <linux/io.h> instead of <asm/io.h> Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/c7a824c3a2ddc5f44bd89504b8c03a328d69f81d.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-16 15:41:50 +0000