Age | Commit message (Collapse) | Author | Files | Lines |
|
media Kconfig has two entries associated to V4L API:
VIDEO_DEV and VIDEO_V4L2.
On Kernel 2.6.x, there were two V4L APIs, each one with its own flag.
VIDEO_DEV were meant to:
1) enable Video4Linux and make its Kconfig options to appear;
2) it makes the Kernel build the V4L core.
while VIDEO_V4L2 where used to distinguish between drivers that
implement the newer API and drivers that implemented the former one.
With time, such meaning changed, specially after the removal of
all V4L version 1 drivers.
At the current implementation, VIDEO_DEV only does (1): it enables
the media options related to V4L, that now has:
menu "Video4Linux options"
visible if VIDEO_DEV
source "drivers/media/v4l2-core/Kconfig"
endmenu
but it doesn't affect anymore the V4L core drivers.
The rationale is that the V4L2 core has a "soft" dependency
at the I2C bus, and now requires to select a number of other
Kconfig options:
config VIDEO_V4L2
tristate
depends on (I2C || I2C=n) && VIDEO_DEV
select RATIONAL
select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
default (I2C || I2C=n) && VIDEO_DEV
In the past, merging them would be tricky, but it seems that it is now
possible to merge those symbols, in order to simplify V4L dependencies.
Let's keep VIDEO_DEV, as this one is used on some make *defconfig
configurations.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for meson-vdec & meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Acked-by: Ćukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
VP9 support for GXM appears to have been missed from the original
codec submission [0] but it works well, so let's add support.
[0] https://github.com/torvalds/linux/commit/00c43088aa680989407b6afbda295f67b3f123f1
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As the possible failure of the kzalloc(), the 'new_ts' could be NULL
pointer.
Therefore, it should be better to check it in order to avoid the
dereference of the NULL pointer.
Also, the caller esparser_queue() needs to deal with the return value of
the amvdec_add_ts().
Fixes: 876f123b8956 ("media: meson: vdec: bring up to compliance")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In many places the bytesused field of struct vb2_buffer is set
directly. Replace that with the function call
vb2_set_plane_payload
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix a bunch of kernel-doc warnings:
drivers/staging/media/meson/vdec/esparser.h:22: warning: Function parameter or member 'core' not described in 'esparser_queue_eos'
drivers/staging/media/meson/vdec/esparser.h:22: warning: Function parameter or member 'data' not described in 'esparser_queue_eos'
drivers/staging/media/meson/vdec/esparser.h:22: warning: Function parameter or member 'len' not described in 'esparser_queue_eos'
drivers/staging/media/meson/vdec/esparser.h:28: warning: Function parameter or member 'work' not described in 'esparser_queue_all_src'
drivers/staging/media/meson/vdec/vdec.h:92: warning: Function parameter or member 'vdec_hevcf_clk' not described in 'amvdec_core'
drivers/staging/media/meson/vdec/vdec.h:92: warning: Function parameter or member 'vdev_dec' not described in 'amvdec_core'
drivers/staging/media/meson/vdec/vdec.h:92: warning: Function parameter or member 'lock' not described in 'amvdec_core'
drivers/staging/media/meson/vdec/vdec.h:141: warning: Function parameter or member 'resume' not described in 'amvdec_codec_ops'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'lock' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'sequence_out' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'num_dst_bufs' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'changed_format' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'last_offset' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'wrap_count' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec.h:274: warning: Function parameter or member 'fw_idx_to_vb2_idx' not described in 'amvdec_session'
drivers/staging/media/meson/vdec/vdec_helpers.h:59: warning: Function parameter or member 'tc' not described in 'amvdec_add_ts'
drivers/staging/media/meson/vdec/vdec_helpers.h:59: warning: Function parameter or member 'flags' not described in 'amvdec_add_ts'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: zhaoxiao <long870912@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The variable reg_cur is being initialized with a value that is never
read, it is being updated later on. The assignment is redundant and
can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
devm_ioremap_resource() prints error message in itself. Remove the
dev_err call to avoid redundant error message.
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
One comment used /** instead of /*, so it caused kernel-doc
warnings. Just turn it into a regular comment.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The meson vdec driver also supports Amlogic G12/SM1 hardware.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This is only needed for drivers that do not use vb2_fop_release().
Note that vb2_queue_release() is *not* the counterpart of vb2_queue_init()
as some drivers here seem to think.
Also use vb2_video_unregister_device() to automatically stop streaming
at unregister time for those drivers that set vdev->queue.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The motion compensation reference cache controller allows caching
parts of reference frames for faster decoding.
Fixes: 00c43088aa68 ("media: meson: vdec: add VP9 decoder support")
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This adds VP9 decoding for the Amlogic GXL, G12A & SM1 SoCs, using
the commong "HEVC" HW decoder.
For G12A & SM1, it uses the IOMMU support from the firmware.
For 10bit decoding, the firmware can only decode in the proprietary
Amlogic Framebuffer Compression format, but can output in 8bit NV12
buffer while writing the decoded frame.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Amlogic VP9 decoder requires an additional 16-byte payload before every
frame header.
The source buffer is updated in-place, then given to the Parser FIFO DMA.
The FIFO DMA copies the blocks into the 16MiB parser ring buffer, then parses
and copies the slice into the decoder "workspace".
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add support for the HEVC & VP9 common decoder support, handling
Amlogic GXBB, GXL, G12A and SM1 platforms.
This handles the "HEVC" hw decoder used for HEVC and VP9, and will be
using in the new H264 multi-instance decoder for G12A & SM1 platforms.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add helpers to support the lossless framebuffer compression format that
will be used in HEVC & VP9 decoders when decoding 10bit content for
downsampling to 8bit NV12 and later proper compressed buffer support.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The HEVC/VP9 aligns the plane stride on 32, so align the planes stride
for all codecs to 32 to satisfy HEVC/VP9 decoding using the "HEVC" HW.
This fixes VP9 decoding of streams with following (not limited) widths:
- 264
-288
- 350
- 352
- 472
- 480
- 528
- 600
- 720
- 800
- 848
- 1440
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add support for the H264 compressed format (V4L2_PIX_FMT_H264).
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add all the necessary bits to pass v4l2-compliance in stateful decoding
mode.
Mostly includes tracking the state of the decoder, allowing the OUTPUT
queue to stream while the CAPTURE queue is inactive, handling resolution
change events, draining with V4L2_DEC_CMD_STOP, copying more metadata
from the src buffers to the dst buffers, etc.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
'GRABBER' is a weird name, all other types map to the /dev
device names. Rename to 'VIDEO' to be consistent with the
other types.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add support for the Amlogic SM1 platform for the current MPEG1 & MPEG2
support.
The SM1 family, very close to the G12A SoCs, has a slighly different power
management control, thus needing a separate compatible and family id.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add support for the G12A platform by:
- adding the G12A codec support, here MPEG1 & MPEG2
- getting the new hevcf clock for the upcoming HEVC/VP9 decoding support
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently if the allocation of new_buf fails then a null pointer
dereference occurs when assiging new_buf->vb. Avoid this by returning
early on a memory allocation failure as there is not much more can
be done at this point.
Addresses-Coverity: ("Dereference null return")
Fixes: 3e7f51bd9607 ("media: meson: add v4l2 m2m video decoder driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-43-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The pointer mpeg12 is being initialized however that value is never
read and mpeg12 is being re-assigned almost immediately afterwards.
Remove the redundant initialization.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Fix building error:
of function kthread_should_stop;
did you mean thread_saved_sp? [-Werror=implicit-function-declaration]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Amlogic SoCs feature a powerful video decoder unit able to
decode many formats, with a performance of usually up to 4k60.
This is a driver for this IP that is based around the v4l2 m2m framework.
It features decoding for:
- MPEG 1
- MPEG 2
Supported SoCs are: GXBB (S905), GXL (S905X/W/D), GXM (S912)
There is also a hardware bitstream parser (ESPARSER) that is handled here.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|