Age | Commit message (Collapse) | Author | Files | Lines |
|
Now that the SPDX tag is in all greybus files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/staging/greybus files files with the correct SPDX
license identifier based on the license text in the file itself. The
SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
$ make includecheck | grep staging
./drivers/staging/greybus/uart.c: linux/serial.h is included more than once.
Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch replace "is is " with "is". The replacement couldn't be
automated because sometimes the first "is" was meant to be another
word.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
<linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch fixes only obvious lines.
There are still more issues.
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver does not have a low-latency mode and should not report
anything else.
Also drop the skip-test flag which isn't used either.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the tty get_icount operation instead of implementing TIOCGICOUNT
directly.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop invalid user-pointer check from TIOCGSERIAL handler.
A NULL-pointer can be valid in user space and copy_to_user() takes care
of sanity checking.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This resolves a merge issue with
drivers/staging/iio/accel/sca3000_core.c and we want the fixes all in
here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Declare tty_port_operations structure as const as it is only stored in
the ops field of a tty_port structure which is a field of a gb_tty
structure. The ops field is of type const struct tty_port_operations *,
so tty_port_operations structures having this property can be
declared as const.
Done using Coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct tty_port_operations i@p = {...};
@ok1@
identifier r1.i;
position p;
struct gb_tty q;
@@
q.port.ops=&i@p
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct tty_port_operations i={...};
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct tty_port_operations i;
File size before:
text data bss dec hex filename
7646 512 56 8214 2016 drivers/staging/greybus/uart.o
File size after:
text data bss dec hex filename
7710 448 56 8214 2016 drivers/staging/greybus/uart.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Reviewed-by: David Lin <dtwlin@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some of the print messages are using the incorrect device pointer, fix
them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes checkpatch.pl warning:
CHECK: Alignment should match open parenthesis
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes checkpatch.pl warning:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds runtime pm support for the uart driver.
Testing Done: Using the test daughter board, let
the gpb bridge enter standby and do a uart transfer
operation.
Signed-off-by: Axel Haslam <haslam_axel@projectara.com>
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Alex Elder <elder@linaro.org>
|
|
This reverts commit bd3c4aa99dc23449699432e0744bcb5af7afa98c.
Someone decided that all use of spin_lock_irq was to be considered a bug
and went on a search-and-replace type "bug-fixing" spree last week.
This is however just plain wrong. Using spin_lock_irq is perfectly fine
in paths were interrupts have not been disabled, and this is in fact
even preferred over the lazy approach of always using spin_lock_irqsave
instead of understanding the code that is being written or modified.
All current uses of spin_lock_irq have already been vetted in this
respect. Also note that it is only used in functions that may sleep,
that is, in functions that must not be called with interrupts disabled
in the first place.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
spin_[un]lock_irq() routines should be used carefully as they things can
go wrong, if they are mixed with spin_lock_irqsave() or other variants.
The main problem is that spin_[un]lock_irq() routines doesn't check if
the IRQs are already disabled/enabled on the local CPU and so
spin_unlock_irq() will forcefully enable interrupts for example.
This may not work well, if some other code was relying on interrupts
being disabled.
Use spin_lock_irqsave() and spin_unlock_restore() instead.
This patch doesn't claim that it fixes the JIRA completely, but
the issue was harder to reproduce for some iterations after this, which
was quite easy to reproduce earlier on.
Tested on EVT 2.0 with lots of debug patches to kernel and greybus.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This reverts commit 469fbe5da0229edcb42aa08bef8e10feaa37e6d7.
It isn't correct in places.
Reported-by: Gjorgji Rosikopulos <rosikopulos_gjorgji@projectara.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
spin_[un]lock_irq() routines should be used carefully as they things can
go wrong, if they are mixed with spin_lock_irqsave() or other variants.
The main problem is that spin_[un]lock_irq() routines doesn't check if
the IRQs are already disabled/enabled on the local CPU and so
spin_unlock_irq() will forcefully enable interrupts for example.
This may not work well, if some other code was relying on interrupts
being disabled.
Use spin_lock_irqsave() and spin_unlock_restore() instead.
This patch doesn't claim that it fixes the JIRA completely, but
the issue was harder to reproduce for some iterations after this, which
was quite easy to reproduce earlier on.
Tested on EVT 2.0 with lots of debug patches to kernel and greybus.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This patch removes few blank lines across the repository at places where
two blank lines were present together or when a blank line is present at
the start or end of a routine.
Note that this doesn't remove most of them from greybus_protocols.h as
they were added on purpose.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
On the gb_uart_remove() path we are forgetting to do a release_minor()
leading to a minor number leak. This is a simple one-line fix.
Tested on EVT 2.0
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
We should be using the generic version handling at bundle level, instead
of at protocol level for bridged PHY devices as well.
The bundle version handling is already in place, though it is *not* used
today as we haven't bumped the version of control protocol yet.
Remove protocol specific handling for bridged PHY devices.
Tested on EVT 1.5 with gpbridge-test module. No nuttx changes are
required with this.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
We should try to wait until all credits are accounted
for before returning from shutdown.
For this purpose add a helper function that will
wait on completion, and call it form the shutdown.
This helper will also be useful when "wait until sent" is
implemented.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Data may be held pening in the hardware because of flow
control mechanisms. When the port is closed, we need to flush
all data that was not sent.
For this, use the greybus message GB_UART_TYPE_FLUSH_FIFOS
which will flush all data queued on the module but not
yet sent on the data line.
Suggested-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
To avoid polling the firmware for space, a credit based system
is implemented.
The host will keep track of how many credits (bytes) it has
sent to the firmware, and stop sending data when the quota
is filled.
The host will be informed that the firmware has more
room for data when it handles the receive_credits request
message from the firmware, and will continue to write data
as credits become available.
The firmware and the host may implement an algorithm to aggregate
credits, and avoid extra greybus traffic.
Suggested-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The firmware now buffers data instead of blocking while the transfer
is sent, and the write operation cannot sleep.
Instead of using gb_transfer_sync (which sleeps) in the write callback,
buffer data in a fifo and send it from from a work queue.
The write_room callback will will report 1 byte less that what is really
available in the fifo, to leave space for extra characters that may
be added by the tty layer.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Dtr_dts allows the tty layer to set the flow control lines
to the correct state during open and close.
Note that locking for newctrl is missing throughout the
driver and will be addressed on a separate patch.
Suggested-and-reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Handle the CRTSCTS flag in set_termios, so that auto
flow control can be turned off. For this, add a new flag
in the line coding request specifically for this purpose.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The 'gpbridge' name didn't relaly reflect what the bus is; which
is a bus for bridged-phy devices. So, rename all instances
of 'gpbridge' to more appropriate 'gbphy'
Testing Done:
Build and boot tested. 'lsgb' will stop displaying 'GPBridge' devices
until I change the library to reflect this change.
Signed-off-by: Sandeep Patil <patil_sandeep@projectara.com>
Suggested-by: Greg Kroah-Hartman <gregkh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The unset the DTR flag is missing "~"
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Create separate module for uart gpbridge driver.
Tested on EVT 1.5 by inserting GP test module, all the devices were
enumerated correctly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This was done long back and was probably the best bet then, but it looks
really bad to have it this way now.
Kill the hack and implement proper driver init()/exit() routines to do
the same thing.
Tested using gbsim by hotplugging uart manifest and removing it later.
Also tried removing the gb-phy module to test the exit path properly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This converts the UART driver to be a gpbridge driver, moving it away
from the "legacy" interface.
Testing Done: Tested on gbsim.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
[vaibhav.hiremath@linaro.org: 1.Changed code to retain init/exit fns of
drivers. 2.Exit path fix. 3. Fixed review comments]
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The check for line coding changed should use memcmp and not memcpy.
Testing done: trivial
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This converts all drivers to use the gb_connection_get_data() and
gb_connection_set_data() functions to make it a bit more explicit as to
what is going on.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Create gpbridge.h for the gpbridge-specific function prototypes, the
rest of the greybus drivers don't care about them.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
|
|
Fix incomplete receive-data sanity checks.
The payload size was never verified before parsing the uart header and
neither was the uart-header data size verified against the actual
payload size, something which could lead to information leaks when
passing data beyond the payload buffer to the tty layer.
Also remove the incorrect check against the maximum (tx-buffer) payload
size.
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add dedicated serial-state request handler and add the missing sanity
check on the incoming request.
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Let's be well behaved and add a sanity check on the maximum greybus
payload size to avoid underflow on the calculated buffer size.
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
We forgot to count the size of the uart send data message header when
calculating the maximum size of the buffer that the uart driver could
send in one chunk.
This fixes the math and makes the variable a size_t to match the return
value of the call to gb_operation_get_payload_size_max();
Reported-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Tested-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
When inserting and removing a module with a UART protocol defined a
double free of the tty_port would happen and that would generate a lot
of kernel oops in different places related to memory corruption.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
To clearly specify the base for printed values, prefix hexadecimal
values with 0x.
Suggested-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
We are removing struct device from the gb_connection structure in the
near future. The gb_bundle structure's struct device should be used as
a replacement.
This patch moves the uart driver to use the bundle pointer instead of
the connection pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
|
|
This is done from a common place now, no need to replicate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
We already have macros for these, use them instead of writing fixed
values.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Fixing needless redefinition of operation types in gbsim reveals this typo
GB_UART_TYPE_SET_BREAK -> GB_UART_TYPE_SEND_BREAK. This patch should be
applied in lock-step to the patch to gbsim 'gbsim/uart: remove unnecessary
redefinition of operation types' since gbsim does not contain the typo.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
idr and ida structures have internal memory allocated that needs to be
freed when modules are removed. So call the proper idr_destroy() or
ida_destroy() functions on the module exit path to free the memory.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
|
|
This macro is also required by core protocols like control and svc, and
hence the 'gpbridge' name doesn't fit anymore.
Lets call this macro gb_builtin_protocol_driver().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The greybus UART protocol specification was updated to reduce the size of
the control field in serial-state-request and line-state-request. This
patch updates the kernel protocol driver to reflect the specification
changes. Once applied gbsim changes will be also be updated automatically
since gbsim depends on the header being modified directly.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
After reviewing the UART specification for greybus break, parity, framing
and over-run errors were moved to the receive-data message. This patch
implements that specification change in the UART protocol driver. Matching
code in gbsim has been tested with this change.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|