summaryrefslogtreecommitdiffstats
path: root/drivers/ssb
AgeCommit message (Collapse)AuthorFilesLines
2012-10-19ssb: move parallel flash config into an own structHauke Mehrtens1-7/+7
This is a preparing step for adding serial flash support. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ssb: check for flash presentenceRafał Miłecki1-7/+21
We can not assume parallel flash is always present, there are boards with *serial* flash and probably some without flash at all. Define some bits by the way. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-11ssb: add missing PCI ID for b/g/n single band BCM4322Jonas Gorski1-0/+1
14e4:432c is found on some bcm63xx devices. The device is working fine with b43. Reported-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06ssb: recognize ARM Cortex M3Hauke Mehrtens1-0/+2
I found this core on a BCM4322, a PCI card in the Linksys WRT610N V1. This core is not used by the driver, this patch just makes ssb show the correct name. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16ssb: add PCI IDs 0x4322 and 43222Hauke Mehrtens1-0/+2
The 0x4322 ID is found on the BCM4322 used on some SoCs like the Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID is found on the BCM43222 used on some other SoCs like the D-Link DSL-2760U connected to a BCM63xx. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16bcma/ssb: parse new attributes from spromHauke Mehrtens1-0/+69
These newly added attributes are used by brcmsmac. Now bcma should parse all attributes used by brcmsmac out of the sprom. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16ssb: fill board_rev attribute from spromHauke Mehrtens1-0/+2
This attribute is now used in b43 driver and should be filled for all sprom versions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16ssb/bcma: fill attribute alpha2 from spromHauke Mehrtens1-5/+11
The attribute country_code and alpha2 are two different attributes in the sprom. country_code contains some code in an 8 bit coding and alpha2 contains two chars with the country code. The attributes where read out wrongly in the past and country_code is only available on sprom version 1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16ssb: remove rev from boardinfoHauke Mehrtens1-1/+0
Previously the rev contained the revision read from the pci config space and was used as board_rev in the wireless drivers. This is wrong the board_rev is only fetched from the sprom accordingly to the open source part of the Broadcom SDK and brcmsmac. This patch removes the rev from the boardinfo structure and uses the board_rev attribute from sprom instead. This attribute is filled by PCI, PCMCIA, SDIO and SoC code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds8-49/+117
Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-09Merge 3.3-rc6 into driver-core-nextGreg Kroah-Hartman1-1/+1
This was done to resolve a conflict in the drivers/base/cpu.c file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-05ssb: remove 5GHz antenna gain from spromHauke Mehrtens3-43/+22
There is no 2.4 GHz or 5GHz antenna gain stored in sprom. The sprom just stores the gain values for antenna 1 and 2 or 1 to 4 for more recent sprom versions. On old devices antenna 2 was used for 5 GHz wifi. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-15Merge branch 'master' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/debugfs_sta.c net/mac80211/sta_info.h
2012-02-06ssb: add support for bcm5354Hauke Mehrtens4-5/+53
This patch adds support the the BCM5354 SoC. It has a PMU and a constant not configurable clock. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06ssb: log the id, rev and pkg of the chip foundHauke Mehrtens1-0/+3
This makes us see what type of hardware someone uses by the dmesg output. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-01ssb: fix cardbus slot in hostmodeHauke Mehrtens1-1/+1
ssb supports one extra device on the cardbus. This results in two devices in total, one beeing the host controller itself and the other the external device connected to the hostcontroller over cardbus. This makes the cardbus slot work on the Linksys WRT150N. Reported-by: Aaron Z <aaronz@pls-net.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24Remove useless get_driver()/put_driver() callsAlan Stern1-18/+2
As part of the removal of get_driver()/put_driver(), this patch (as1512) gets rid of various useless and unnecessary calls in several drivers. In some cases it may be desirable to pin the driver by calling try_module_get(), but that can be done later. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: "David S. Miller" <davem@davemloft.net> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Michael Buesch <m@bues.ch> CC: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24ssb: SPROM: extract each core power infoRafał Miłecki1-1/+39
We already extract some basic info but it's incomplete, reads info about the first core only. Used data structure doesn't allow easy adding of more cores. This patch adds new struct and array for storing power info. The plan is to: switch all extractors (including the ones using NVRAM) to new struct, switch drivers, then deprecate and finally drop old SSB fields. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14Merge branch 'master' of ↵John W. Linville1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c
2011-12-13ssb: extract FEM info from SPROMRafał Miłecki1-0/+23
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08ssb: fix init regression with SoCsHauke Mehrtens1-2/+6
This fixes a Data bus error on some SoCs. The first fix for this problem did not solve it on all devices. commit 6ae8ec27868bfdbb815287bee8146acbefaee867 Author: Rafał Miłecki <zajec5@gmail.com> Date: Tue Jul 5 17:25:32 2011 +0200 ssb: fix init regression of hostmode PCI core In ssb_pcicore_fix_sprom_core_index() the sprom on the PCI core is accessed, but the sprom only exists when the ssb bus is connected over a PCI bus to the rest of the system and not when the SSB Bus is the main system bus. SoCs sometimes have a PCI host controller and there this code will not be executed, but there are some old SoCs with an PCI controller in client mode around and ssb_pcicore_fix_sprom_core_index() should not be called on these devices too. The PCI controller on these devices are unused, but without this fix it results in an Data bus error when it gets initialized. Cc: Michael Buesch <m@bues.ch> Cc: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-31ssb: Add export.h to files using EXPORT_SYMBOL/THIS_MODULEPaul Gortmaker6-0/+6
Or we will get things like this when we remove the implicit path: drivers/ssb/embedded.c:32: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' drivers/ssb/driver_chipcommon.c:432: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' drivers/ssb/driver_chipcommon_pmu.c:607: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' drivers/ssb/pcihost_wrapper.c:120: error: ‘THIS_MODULE’ undeclared (first use in this function) drivers/ssb/driver_pcicore.c:721: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ drivers/ssb/driver_gige.c:249: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31ssb: Add module.h to the real modules in drivers/ssbPaul Gortmaker2-0/+2
The header cleanup means that module.h is no longer simply everywhere. So real modules need to actively include it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-24ssb: fix DMA translation for some specific boardsRafał Miłecki1-3/+21
Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds15-15/+15
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-22ssb: return correct translation bit for 64-bit DMARafał Miłecki1-1/+4
Remove b43's workarounds at the same time. Other users of ssb_dma_translation do not support any 64-bit DMA devices, so they are not affected. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11Merge branch 'master' of ↵John W. Linville1-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/ath/ath5k/sysfs.c net/bluetooth/l2cap_core.c net/mac80211/wpa.c
2011-07-11Merge branch 'master' into for-nextJiri Kosina1-4/+6
Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
2011-07-07ssb: fix init regression of hostmode PCI coreRafał Miłecki1-9/+9
Our workarounds seem to be clientmode PCI specific. Using SPROM workaround on SoC resulted in Oops: Data bus error, epc == 8017ed58, ra == 80225838 Oops[#1]: Cpu 0 $ 0 : 00000000 10008000 b8000000 00000001 $ 4 : 80293b5c 00000caa ffffffff 00000000 $ 8 : 0000000a 00000003 00000001 696d6d20 $12 : ffffffff 00000000 00000000 ffffffff $16 : 802d0140 b8004800 802c0000 00000000 $20 : 00000000 802c0000 00000000 802d04d4 $24 : 00000018 80151a00 $28 : 81816000 81817df8 8029bda0 80225838 Hi : 00000000 Lo : 00000000 epc : 8017ed58 ssb_ssb_read16+0x48/0x60 Not tainted ra : 80225838 ssb_pcicore_init+0x54/0x3b4 Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-07Update my e-mail addressMichael Büsch15-15/+15
Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-05ssb: use pci_dev->subsystem_{vendor,device}Sergei Shtylyov1-4/+2
The SSB code reads PCI subsystem IDs from the PCI configuration registers while they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}' fields of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05ssb: use pci_dev->revisionSergei Shtylyov1-2/+1
The SSB code reads PCI revision ID from the PCI configuration register while it's already stored by the PCI subsystem in the 'revision' field of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05ssb: PCI revision ID register is 8-bit wideSergei Shtylyov1-1/+1
The SSB code reads PCI revision ID register as 16-bit entity while the register is actually 8-bit only (the next 8 bits are the programming interface register). Fix the read and make the 'rev' field of 'struct ssb_boardinfo' 8-bit as well, to match the register size. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27ssb: use pci_dev->revisionSergei Shtylyov1-2/+1
The bus scan code reads PCI revision ID from the PCI configuration register while it's already stored by PCI subsystem in the 'revision' field of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27ssb: fix ssb clock rate according to broadcom sourceHauke Mehrtens1-2/+2
This fix was done according to si_clock_rate function in broadcom siutils.c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ssb: add __devinit to some functionsHauke Mehrtens4-27/+31
Two functions in ssb are using register_pci_controller() which is __devinit. The functions ssb_pcicore_init_hostmode() and ssb_gige_probe() should also be __devinit. This fixes the following warning: WARNING: vmlinux.o(.text+0x2727b8): Section mismatch in reference from the function ssb_pcicore_init_hostmode() to the function .devinit.text:register_pci_controller() The function ssb_pcicore_init_hostmode() references the function __devinit register_pci_controller(). This is often because ssb_pcicore_init_hostmode lacks a __devinit annotation or the annotation of register_pci_controller is wrong. WARNING: vmlinux.o(.text+0x273398): Section mismatch in reference from the function ssb_gige_probe() to the function .devinit.text:register_pci_controller() The function ssb_gige_probe() references the function __devinit register_pci_controller(). This is often because ssb_gige_probe lacks a __devinit annotation or the annotation of register_pci_controller is wrong. Reported-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17drivers/ssb/driver_chipcommon_pmu.c: uninitilized warningConnor Hansen1-2/+2
warning message drivers/ssb/driver_chipcommon_pmu.c: In function ssb_pmu_resources_init drivers/ssb/driver_chipcommon_pmu.c:420:15: warning: updown_tab_size may be used uninitilized in this function. updown_tab_size and depend_tab_size may not be set in the bus->chip_id switch statement, so set to 0 by default to avoid using uninitialized stack space. Signed-off-by: Connor Hansen <cmdkhh@gmail.com> Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03ssb: fix PCI(e) driver regression causing oops on PCI cardsRafał Miłecki1-4/+6
We were incorrectly executing PCIe specific workarounds on PCI cards. This resulted in: Machine check in kernel mode. Caused by (from SRR1=149030): Transfer error ack signal Oops: Machine check, sig: 7 [#1] Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds5-100/+286
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits) macvlan: fix panic if lowerdev in a bond tg3: Add braces around 5906 workaround. tg3: Fix NETIF_F_LOOPBACK error macvlan: remove one synchronize_rcu() call networking: NET_CLS_ROUTE4 depends on INET irda: Fix error propagation in ircomm_lmp_connect_response() irda: Kill set but unused variable 'bytes' in irlan_check_command_param() irda: Kill set but unused variable 'clen' in ircomm_connect_indication() rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport() be2net: Kill set but unused variable 'req' in lancer_fw_download() irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication() atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined. rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer(). rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler() rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection() rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window() pkt_sched: Kill set but unused variable 'protocol' in tc_classify() isdn: capi: Use pr_debug() instead of ifdefs. tg3: Update version to 3.119 tg3: Apply rx_discards fix to 5719/5720 ... Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c as per Davem.
2011-05-19SSB: Change fallback sprom to callback mechanism.Hauke Mehrtens3-24/+38
Some embedded devices like the Netgear WNDR3300 have two SSB based cards without an own sprom on the pci bus. We have to provide two different fallback sproms for these and this was not possible with the old solution. In the bcm47xx architecture the sprom data is stored in the nvram in the main flash storage. The architecture code will be able to fill the sprom with the stored data based on the bus where the device was found. The bcm63xx code should do the same thing as before, just using the new API. Acked-by: Michael Buesch <mb@bu3sch.de> Cc: netdev@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2362/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-16Merge branch 'master' of ↵John W. Linville3-27/+35
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-13ssb: fix pcicore build breakageJohn W. Linville1-4/+10
drivers/ssb/main.c:1336: error: 'SSB_PCICORE_BCAST_ADDR' undeclared (first use in this function) drivers/ssb/main.c:1337: error: 'SSB_PCICORE_BCAST_DATA' undeclared (first use in this function) drivers/ssb/main.c:1349: error: 'struct ssb_pcicore' has no member named 'dev' Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ssb: move ssb_commit_settings and export itRafał Miłecki2-26/+25
Commiting settings is possible on devices without PCI core (but with CC core). Export it for usage in drivers supporting other cores. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ssb: update list of devices supporting multiple 80211 coresRafał Miłecki1-1/+4
Some of the BCM43xx chips contain cores that are attached to the SSB, but are inactive as they do not connect to the external environment. These must not be registered. Several of these types are handled in driver ssb; however, the specific case of an inactive 802.11 cores is now treated in b43 and b43legacy. Although the current setup works, this minor change will place all such workarounds in ssb, and simplify the code in drivers b43 and b43legacy. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05Merge branch 'master' of ↵John W. Linville4-71/+153
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_cs.c drivers/net/wireless/rtlwifi/pci.c net/bluetooth/l2cap_sock.c
2011-05-02ssb: cc: prepare clockmode support for cores rev 10+Rafał Miłecki1-18/+44
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ssb: pci: early fix for SPROM core indexRafał Miłecki1-0/+12
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ssb: pci: update PCIe workaroundsRafał Miłecki1-8/+27
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ssb: pci: separate workaroundsRafał Miłecki1-40/+58
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-26ssb: update reject bit for Target State LowRafał Miłecki1-8/+7
My 14e4:4315 is SSB_IDLOW_SSBREV_26: read32 0xfaafcff8 -> 0x600422d5 My 14e4:4328 is SSB_IDLOW_SSBREV_24: read32 0xfaafcff8 -> 0x400422c5 My 14e4:432b is SSB_IDLOW_SSBREV_26 again: read32 0xfaafcff8 -> 0x600422d5 For all of them wl driver is using 0x2 reject bit: write32(0xf98) <- 0x00010002 So it seems SSB 2.3 is the exception using another bit. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 10:12:39 +0000