summaryrefslogtreecommitdiffstats
path: root/drivers/ssb
AgeCommit message (Collapse)AuthorFilesLines
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes1-1/+1
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10ssb: Ignore dangling ethernet cores on wireless devicesMichael Büsch1-0/+10
Some Broadcom based wireless devices contain dangling ethernet cores. This triggers the ssb probing mechanism and tries to load the b44 driver on this core. Ignore the dangling core in the ssb core scanning code to avoid access to the core and failure of b44 probing. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22ssb: Use pci_is_pcie()Hauke Mehrtens1-2/+2
Use function pci_is_pcie() instead of accessing struct member directly. CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ssb: Add sysfs attributes to ssb devicesHauke Mehrtens1-0/+30
Make it possible to read out the attributes, till now only show on dmesg, through sysfs. This patch was some time in OpenWrt. Signed-off-by: Bernhard Loos <bernhardloos@googlemail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ssb: extract indexes for power tablesRafał Miłecki1-0/+44
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-24Merge branch 'master' of ↵John W. Linville1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-11-22ssb: b43-pci-bridge: Add new vendor for BCM4318Daniel Klaffenbach1-0/+1
Add new vendor for Broadcom 4318. Signed-off-by: Daniel Klaffenbach <danielklaffenbach@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-18ssb: drop BCM4328 hack for SPROM revisionRafał Miłecki1-4/+0
This hacks leads to incorrect SPROM parsing for me and reading for example MAC as: 00:00:00:54:00:00. Michael G. who introduced this confirmed it is not needed anymore. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Michael Gerdau <mgd@qata.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ssb: return -ENOMEM on alloc fail (instead of CRC check's result)Rafał Miłecki1-4/+3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ssb: workarounds: be verbose about hacking SPROM revision, don't duplicate codeRafał Miłecki1-22/+23
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15ssb: Clear RETRY_TIMEOUT in PCI Configuration for normal devicesLarry Finger1-0/+7
MMIO log traces obtained using the Broadcom wl hybrid driver show that the RETRY_TIMEOUT register (0x41) in PCI configuration space is cleared if non-zero. Similar code found in other drivers such as ipw2100 show this operation is needed to keep PCI Tx retries from interfering with C3 CPU state. There are no known cases where omission of this code has caused a problem, but this patch is offered just in case such a situation occurs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-29pcmcia: convert pcmcia_request_configuration to pcmcia_enable_deviceDominik Brodowski3-3/+0
pcmcia_enable_device() now replaces pcmcia_request_configuration(). Instead of config_req_t, all necessary flags are either passed as a parameter to pcmcia_enable_device(), or (in rare circumstances) set in struct pcmcia_device -> flags. With the last remaining user of include/pcmcia/cs.h gone, remove all references. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds3-15/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: avoid buffer overflow in pcmcia_setup_isa_irq pcmcia: do not request windows if you don't need to pcmcia: insert PCMCIA device resources into resource tree pcmcia: export resource information to sysfs pcmcia: use struct resource for PCMCIA devices, part 2 pcmcia: remove memreq_t pcmcia: move local definitions out of include/pcmcia/cs.h pcmcia: do not use io_req_t when calling pcmcia_request_io() pcmcia: do not use io_req_t after call to pcmcia_request_io() pcmcia: use struct resource for PCMCIA devices pcmcia: clean up cs.h pcmcia: use pcmica_{read,write}_config_byte pcmcia: remove cs_types.h pcmcia: remove unused flag, simplify headers pcmcia: remove obsolete CS_EVENT_ definitions pcmcia: split up central event handler pcmcia: simplify event callback pcmcia: remove obsolete ioctl Conflicts in: - drivers/staging/comedi/drivers/* - drivers/staging/wlags49_h2/wl_cs.c due to dev_info_t and whitespace changes
2010-08-03pcmcia: use pcmica_{read,write}_config_byteDominik Brodowski1-12/+2
Use pcmcia_read_config_byte and pcmcia_write_config_byte instead of pcmcia_access_configuration_register. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30pcmcia: remove cs_types.hDominik Brodowski3-3/+0
Remove cs_types.h which is no longer needed: Most definitions aren't used at all, a few can be made away with, and two remaining definitions (typedefs, unfortunatley) may be moved to more specific places. CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-06-04ssb: remove the ssb DMA APIFUJITA Tomonori1-74/+0
Now they are unnecessary. We can use the generic DMA API with any bus. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Michael Buesch <mb@bu3sch.de> Cc: Gary Zambrano <zambrano@broadcom.com> Cc: Stefano Brivio <stefano.brivio@polimi.it> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: John W. Linville <linville@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-04ssb: add dma_dev to ssb_device structureFUJITA Tomonori1-0/+2
Add dma_dev, a pointer to struct device, to struct ssb_device. We pass it to the generic DMA API with SSB_BUSTYPE_PCI and SSB_BUSTYPE_SSB. ssb_devices_register() sets up it properly. This is preparation for replacing the ssb bus specific DMA API (ssb_dma_*) with the generic DMA API. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Michael Buesch <mb@bu3sch.de> Cc: Gary Zambrano <zambrano@broadcom.com> Cc: Stefano Brivio <stefano.brivio@polimi.it> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: John W. Linville <linville@tuxdriver.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-04ssb: Handle alternate SSPROM locationLarry Finger2-2/+14
In kernel Bugzilla #15825 (2 users), in a wireless mailing list thread (http://lists.infradead.org/pipermail/b43-dev/2010-May/000124.html), and on a netbook owned by John Linville (http://marc.info/?l=linux-wireless&m=127230751408818&w=4), there are reports of ssb failing to detect an SPROM at the normal location. After studying the MMIO trace dump for the Broadcom wl driver, it was determined that the affected boxes had a relocated SPROM. This patch fixes all systems that have reported this problem. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ssb: fast powerup delay calculation for PMU capable devicesRafał Miłecki1-0/+24
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03ssb: update PMU init to match specsRafał Miłecki1-10/+7
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-28ssb: fix NULL ptr deref when pcihost_wrapper is usedChristoph Fritz2-3/+7
Ethernet driver b44 does register ssb by it's pcihost_wrapper and doesn't set ssb_chipcommon. A check on this value introduced with commit d53cdbb94a52a920d5420ed64d986c3523a56743 and ea2db495f92ad2cf3301623e60cb95b4062bc484 triggers: BUG: unable to handle kernel NULL pointer dereference at 00000010 IP: [<c1266c36>] ssb_is_sprom_available+0x16/0x30 Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds4-3/+31
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-10pcmcia: re-work pcmcia_request_irq()Dominik Brodowski1-1/+1
Instead of the old pcmcia_request_irq() interface, drivers may now choose between: - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq. - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will clean up automatically on calls to pcmcia_disable_device() or device ejection. - drivers still not capable of IRQF_SHARED (or not telling us so) may use the deprecated pcmcia_request_exclusive_irq() for the time being; they might receive a shared IRQ nonetheless. CC: linux-bluetooth@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-usb@vger.kernel.org CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-05Merge branch 'master' of ↵John W. Linville4-3/+30
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas_tf/cmd.c drivers/net/wireless/libertas_tf/main.c
2010-04-26ssb: Make bus registration failure not be silentLarry Finger1-0/+3
In kernel Bugzilla #15825, a case where routine ssb_bus_pcibus_register() fails silently is reported. The cause for the failure is still being investigated; however, the diagnosis would be easier if the failure had been reported. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26ssb: Use relative offsets for SPROMRafał Miłecki1-1/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26ssb: Look for SPROM at different offset on higher rev CCRafał Miłecki1-3/+6
Our offset handling becomes even a little more hackish now. For some reason I do not understand all offsets as inrelative. It assumes base offset is 0x1000 but it will work for now as we make offsets relative anyway by removing base 0x1000. Should be cleaner however. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26ssb: do not read SPROM if it does not existJohn W. Linville3-0/+21
Attempting to read registers that don't exist on the SSB bus can cause hangs on some boxes. At least some b43 devices are 'in the wild' that don't have SPROMs at all. When the SSB bus support loads, it attempts to read these (non-existant) SPROMs and causes hard hangs on the box -- no console output, etc. This patch adds some intelligence to determine whether or not the SPROM is present before attempting to read it. This avoids those hard hangs on those devices with no SPROM attached to their SSB bus. The SSB-attached devices (e.g. b43, et al.) won't work, but at least the box will survive to test further patches. :-) Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Michael Buesch <mb@bu3sch.de>
2010-04-21Merge branch 'master' of ↵David S. Miller1-29/+0
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-6000.c net/core/dev.c
2010-04-12MIPS: Fix SSB PCIcore IO resource managementAndreas Ferber1-29/+0
The SSB PCIcore code reused the IO resource fixup code from the original 2.4.x Broadcom patch for BCM47xx based devices, which was a quick hack for doing PCI IO resource configuration back then (the boot loader doesn't configure PCI devices on this platform). However, this code is no longer necessary since the kernel now can do PCI resource management fine all by itself, so remove the old code. When removing the code, it becomes obvious that the mem_offset setting in the PCIcore driver was wrong, however this was masked by the fixup code before, except in a few cases involving yenta_socket. For BCM47xx, the correct offset is 0, and since this is the only device using PCIcore in host mode, the offset can simply be removed unconditionally. Signed-off-by: Andreas Ferber <af@chaos-agency.de> Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Markus Wigge <markus@cultcom.de> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1070/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-11Merge branch 'master' of ↵David S. Miller5-0/+5
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo5-0/+5
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-10ssb: Export ssb_chipco_gpio_control - needed by N PHY codeLarry Finger1-0/+1
The latest changes in the N PHY core require the symbol ssb_chipco_gpio_control to be exported. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19ssb: Add PCI ID 0x4322 to PHU handlingLarry Finger1-0/+7
Some of the N PHYs need a revision in the handling of the PMU. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-15ssb: fix typo in ifdef commentHauke Mehrtens1-2/+2
Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08ssb: fix interrupt assignmentJochen Friedrich1-1/+4
Explicitely enable shared interrupt 2 for any core that didn't get a dedicated IRQ anymore (fallthrough case) and for EXTIF cores to make gpio interrupts work. Also remove a bogus comment. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-03ssb: Fix CONFIG_SSB_SDIOHOST typoMichael Buesch1-2/+1
This fixes a CONFIG_SSB_SDIOHOST typo. Signed-off-by: Michael Buesch <mb@bu3sch.de> Reported-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Tested-By: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-05Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller1-114/+118
Conflicts: drivers/net/pcmcia/fmvj18x_cs.c drivers/net/pcmcia/nmclan_cs.c drivers/net/pcmcia/xirc2ps_cs.c drivers/net/wireless/ray_cs.c
2009-12-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds1-114/+118
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (50 commits) pcmcia: rework the irq_req_t typedef pcmcia: remove deprecated handle_to_dev() macro pcmcia: pcmcia_request_window() doesn't need a pointer to a pointer pcmcia: remove unused "window_t" typedef pcmcia: move some window-related code to pcmcia_ioctl.c pcmcia: Change window_handle_t logic to unsigned long pcmcia: Pass struct pcmcia_socket to pcmcia_get_mem_page() pcmcia: Pass struct pcmcia_device to pcmcia_map_mem_page() pcmcia: Pass struct pcmcia_device to pcmcia_release_window() drivers/pcmcia: remove unnecessary kzalloc pcmcia: correct handling for Zoomed Video registers in topic.h pcmcia: fix printk formats pcmcia: autoload module pcmcia pcmcia/staging: update comedi drivers PCMCIA: stop duplicating pci_irq in soc_pcmcia_socket PCMCIA: ss: allow PCI IRQs > 255 PCMCIA: soc_common: remove 'dev' member from soc_pcmcia_socket PCMCIA: soc_common: constify soc_pcmcia_socket ops member PCMCIA: sa1111: remove duplicated initializers PCMCIA: sa1111: wrap soc_pcmcia_socket to contain sa1111 specific data ...
2009-11-23ssb: Fix range check in sprom writeMichael Buesch1-4/+16
The range check in the sprom image parser hex2sprom() is broken. One sprom word is 4 hex characters. This fixes the check and also adds much better sanity checks to the code. We better make sure the image is OK by doing some sanity checks to avoid bricking the device by accident. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23ssb: Fix SPROM writingMichael Buesch3-70/+78
The SPROM writing routines were broken since we rewrote the suspend handling on wireless devices, because SPROM writing depended on suspend. This patch changes it and freezes devices with the driver remove(), probe() callbacks instead. This also simplifies the whole logics a lot. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23ssb: Unconditionally log results of core scansLarry Finger1-1/+1
At present, the results of an SSB core scan are only logged when CONFIG_SSB_DEBUG is "y". As this may not be set in a distro kernel, it is difficult interpret many problems posted in bug reports or in help forums. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11Merge branch 'master' of ↵David S. Miller1-1/+5
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-1000.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-core.h
2009-11-10ssb-pcmcia: Fix 32bit register access in early bus scanningMartin Fuzzey1-1/+5
The scan function was using 32 bit access which does not work on 16bit CF cards. This patch corrects this by doing two 16 bit reads like ssb_pcmcia_read32 already does. mb -- Removed locking. That early in init there's no need for locking. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-08pcmcia: convert ssb pcmcia driver to use new CIS helpersDominik Brodowski1-114/+118
SSB is a prime example of how to make use of the new CIS helpers. CC: Michael Buesch <mb@bu3sch.de> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-27ssb: Put host pointers into a unionMichael Buesch1-2/+2
This slightly shrinks the structure. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-16ssb/sdio: fix printk format warningsRandy Dunlap1-2/+2
Fix printk format warnings: drivers/ssb/sdio.c:336: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t' drivers/ssb/sdio.c:443: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14ssb: Fix error when V1 SPROM extraction is forcedLarry Finger1-0/+1
When an SPROM revision is not recognized, the code falls back to a V1 SPROM; however, that revision is not forced in the appropriate structure. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14ssb: Disable verbose SDIO coreswitchMichael Buesch1-1/+1
Disable SDIO coreswitch debugging. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09ssb: Implement SDIO host bus supportAlbert Herranz6-1/+733
Add support for communicating with a Sonics Silicon Backplane through a SDIO interface, as found in the Nintendo Wii WLAN daughter card. The Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with a SDIO host interface. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 17:00:56 +0000