summaryrefslogtreecommitdiffstats
path: root/drivers/spi
AgeCommit message (Collapse)AuthorFilesLines
2013-02-05Merge branch 'broonie/spi-next' of ↵Grant Likely7-356/+130
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git Minor features and bug fixes for PXA, OMAP and GPIO deivce drivers and a cosmetic change to the bitbang driver. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05spi: remove check for bits_per_word on transfer from low level driverLaxman Dewangan11-25/+16
The spi core make sure that each transfer structure have the proper setting for bits_per_word before calling low level transfer APIs. Hence it is no more require to check again in low level driver for this field whether this is set correct or not. Removing such code from low level driver. The txx9 change also removes a test for bits_per_word set to 0, and forcing it to 8 in that case. This can also be removed now since spi_setup() ensures spi->bits_per_word is not zero. if (!spi->bits_per_word) spi->bits_per_word = 8; Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05spi/of: Use DT aliases for assigning bus numberGrant Likely1-0/+3
Linux assigns a number to each spi_master in the system, but when the platform used the device tree, the numbers are dynamically assigned and are not predictable. In general this shouldn't matter since the kernel doesn't use the bus number for anything other than matching a bus to spi_boardinfo (not used for DT). However, sometimes userspace needs to figure out which bus is which, so it makes sense to use the global /aliases namespace to choose a specific bus number. It is safe to derive the bus number from an alias because aliases will never cause two buses to try and use the same bus number. (At one time the cell-index property was used for this purpose, but cell-index has the risk of an id collision). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Anatolij Gustschin <agust@denx.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-05spi/sh-msiof: Add device tree parsing to driverBastian Hecht1-1/+55
This adds the capability to retrieve setup data from the device tree node. The usage of platform data is still available. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05spi/davinci: add OF support for the spi controllerMurali Karicheri1-14/+88
This adds OF support to DaVinci SPI controller to configure platform data through device bindings. Also replaces clk_enable() with of clk_prepare_enable() as well as clk_disable() with clk_disable_unprepare(). Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05spi/omap2: disable DMA requests before complete()Felipe Balbi1-4/+4
No actual errors have been found for completing before disabling DMA request lines, but it just looks more semantically correct that on our DMA callback we quiesce the whole thing before stating transfer is finished. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-01-29spi: s3c64xx: Modify SPI driver to use generic DMA DT supportPadmavathi Venna1-54/+23
This patch modifies the SPI driver to use generic dma dt bindings support. This passes all the required arguments to dma dev request functon which in turn calls the dma_request_slave_channel or dma__ request_channel based on DT or non-DT respectively. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-28spi: tegra: do not use clock name to get clockPrashant Gaikwad2-2/+2
Since Tegra spi devices do not have multiple clocks, no need to use clock name to get the clock. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: migrate to new clock codePrashant Gaikwad2-2/+2
Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-26spi: spi-omap2-mcspi.c: Toggle CS after each wordMatthias Brugger1-0/+18
This patch allows the board code to define SPI devices which needs to toggle the chip select after every word send. This is needed to get a better resolution reading e.g. an ADC data stream. Apart from that, as in the normal code CS is controlled by software, a transfer is done much faster. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26spi: spi-omap2-mcspi.c: fix coding styleMatthias Brugger1-8/+8
This patch fixes some indentation errors. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26spi: spi-gpio: Add checks for the dt propertiesMaxime Ripard1-3/+20
The bindings assumed that the gpios properties were always there, which made the NO_TX and NO_RX mode not usable from device tree. Add extra checks to make sure that the driver can work if either MOSI or MISO is not used. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26spi/pxa2xx: convert to the common clk frameworkMika Westerberg1-13/+20
Convert clk_enable() to clk_prepare_enable() and clk_disable() to clk_disable_unprepare() respectively in order to support the common clk framework. Otherwise we get warnings on the console as the clock is not prepared before it is enabled. In addition we must cache the maximum clock rate to drv_data->max_clk_rate at probe time because clk_get_rate() cannot be called in tasklet context. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26spi/pxa2xx: convert to the pump message infrastructureMika Westerberg1-200/+12
The SPI core provides infrastructure for standard message queueing so use that instead of handling everything in the driver. This simplifies the driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26spi/pxa2xx: fix warnings when compiling a 64-bit kernelMika Westerberg1-3/+2
Fix following warnings seen when compiling 64-bit: drivers/spi/spi-pxa2xx.c: In function ‘map_dma_buffers’: drivers/spi/spi-pxa2xx.c:384:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/spi/spi-pxa2xx.c:384:40: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/spi/spi-pxa2xx.c: In function ‘pxa2xx_spi_probe’: drivers/spi/spi-pxa2xx.c:1572:34: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/spi/spi-pxa2xx.c:1572:34: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/spi/spi-pxa2xx.c:1572:34: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/spi/spi-pxa2xx.c:1572:27: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26spi/pxa2xx: allow building on a 64-bit kernelMika Westerberg1-2/+2
We are going to use it on 64-bit kernel on Intel Lynxpoint so make sure we can build it into such kernel. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-25spi: Convert to devm_ioremap_resource()Thierry Reding7-29/+21
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21drivers/spi: remove depends on CONFIG_EXPERIMENTALKees Cook1-10/+9
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-14spi: bitbang: simplify pointer arithmeticsGuennadi Liakhovetski1-13/+14
Add a pointer variable to make spi_bitbang_start() look simpler. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08spi/pxa2xx: embed the ssp_device to platform dataMika Westerberg2-72/+16
The spi-pxa2xx-pci glue driver had to implement pxa_ssp_request()/free() in order to support the spi-pxa2xx platform driver. Since the ACPI enabled platforms can use the same platform driver we would need to implement pxa_ssp_request()/free() in some central place that can be shared by the ACPI and PCI glue code. Instead of doing that we can make pxa_ssp_request()/free() to be available only when CONFIG_ARCH_PXA is set. On other arches these are being stubbed out in preference to passing the ssp_device from the platform data directly. We also change the SPI bus number to be taken from ssp->port_id instead of platform device id. This way the supporting code that passes the ssp can decide the number (or it can set it to the same as pdev->id). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08spi/pxa2xx-pci: switch to use pcim_* interfacesMika Westerberg1-56/+30
Instead of open-coding all the error management in the driver we can take advantage of the pcim_* interfaces that release the resources automatically. We also use platform_device_register_full() to register the platform device because it allows us to create and register the platform device at one go, simplifying the error management. This a preparatory step for getting rid of pxa_ssp_request()/free() which we will do in the next patch. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08spi/s3c64xx: Complain if we fail to set a transfer speedMark Brown1-0/+2
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-19spi/sh-hspi: fix return value check in hspi_probe().Cyril Roelandt1-1/+1
According to its documentation, clk_get() returns a "valid IS_ERR() condition containing errno", so we should call IS_ERR() rather than a NULL check. Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-17spi/atmel: add DT supportJean-Christophe PLAGNIOL-VILLARD1-1/+16
Use the newly introduce cs-gpios dt support on atmel. We do not use the hardware cs as it's wired and has bugs and limitations. As the controller believes that only active-low devices/systems exists. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-15of/spi: Fix SPI module loading by using proper "spi:" modalias prefixes.David Daney1-1/+4
To get modprobe to automatically load the proper modules, we need to prefix things with "spi:". Partially based on Grant Likely's suggestions. Signed-off-by: David Daney <david.daney@cavium.com> [grant.likely: reworked because drivers/of/of_spi.c has been removed] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-15spi: Change FIFO flush operation and spi channel offKyoungil Kim1-4/+4
Setting SW_RST does TX/RX FIFO flush. After FIFO flush, SW_RST should be cleared. The above setting and clearing SW_RST operation should be done after spi channel off. Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-15spi: Keep chipselect assertion during one messageKyoungil Kim1-2/+0
During all transfers in one message, the device will not be chagned. So we don't need to deassert chipselect during one message. Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-13Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds52-938/+2749
Pull SPI updates from Grant Likely: "Primarily SPI device driver bug fixes, one removal of an old driver, and some new tegra support. There is some core code change too, but all in all pretty small stuff. The new features to note are: - Common code for describing GPIO CS lines in the device tree - Remove the SPI_BUFSIZ limitation on spi_write_the_read() - core spi ensures bits_per_word is set correctly - SPARC can now use SPI" * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: (36 commits) spi/sparc: Allow of_register_spi_devices for sparc spi: Remove HOTPLUG section attributes spi: Add support for specifying 3-wire mode via device tree spi: Fix comparison of different integer types spi/orion: Add SPI_CHPA and SPI_CPOL support to kirkwood driver. spi/sh: Add SH Mobile series as dependency to MSIOF controller spi/sh-msiof: Remove unneeded clock name spi: Remove SPI_BUFSIZ restriction on spi_write_then_read() spi/stmp: remove obsolete driver spi/clps711x: New SPI master driver spi: omap2-mcspi: remove duplicate inclusion of linux/err.h spi: omap2-mcspi: Fix the redifine warning spi/sh-hspi: add CS manual control support of_spi: add generic binding support to specify cs gpio spi: omap2-mcspi: remove duplicated include from spi-omap2-mcspi.c spi/bitbang: (cosmetic) simplify list manipulation spi/bitbang: avoid needless loop flow manipulations spi/omap: fix D0/D1 direction confusion spi: tegra: add spi driver for sflash controller spi: Dont call master->setup if not populated ...
2012-12-12Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
2012-12-11Merge tag 'pm+acpi-for-3.8-rc1' of ↵Linus Torvalds1-1/+102
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: - Introduction of device PM QoS flags. - ACPI device power management update allowing subsystems other than PCI to use it more easily. - ACPI device enumeration rework allowing additional kinds of devices to be enumerated via ACPI. From Mika Westerberg, Adrian Hunter, Mathias Nyman, Andy Shevchenko, and Rafael J. Wysocki. - ACPICA update to version 20121018 from Bob Moore and Lv Zheng. - ACPI memory hotplug update from Wen Congyang and Yasuaki Ishimatsu. - Introduction of acpi_handle_<level>() messaging macros and ACPI-based CPU hot-remove support from Toshi Kani. - ACPI EC updates from Feng Tang. - cpufreq updates from Viresh Kumar, Fabio Baltieri and others. - cpuidle changes to quickly notice governor prediction failure from Youquan Song. - Support for using multiple cpuidle drivers at the same time and cpuidle cleanups from Daniel Lezcano. - devfreq updates from Nishanth Menon and others. - cpupower update from Thomas Renninger. - Fixes and small cleanups all over the place. * tag 'pm+acpi-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (196 commits) mmc: sdhci-acpi: enable runtime-pm for device HID INT33C6 ACPI: add Haswell LPSS devices to acpi_platform_device_ids list ACPI: add documentation about ACPI 5 enumeration pnpacpi: fix incorrect TEST_ALPHA() test ACPI / PM: Fix header of acpi_dev_pm_detach() in acpi.h ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000 ACPI : do not use Lid and Sleep button for S5 wakeup ACPI / PNP: Do not crash due to stale pointer use during system resume ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set spi / ACPI: add ACPI enumeration support gpio / ACPI: add ACPI support PM / devfreq: remove compiler error with module governors (2) cpupower: IvyBridge (0x3a and 0x3e models) support cpupower: Provide -c param for cpupower monitor to schedule process on all cores cpupower tools: Fix warning and a bug with the cpu package count cpupower tools: Fix malloc of cpu_info structure cpupower tools: Fix issues with sysfs_topology_read_file cpupower tools: Fix minor warnings cpupower tools: Update .gitignore for files created in the debug directories ...
2012-12-10spi/sparc: Allow of_register_spi_devices for sparcAndreas Larsson1-1/+1
The spi support code works on SPARC too. No reason to exclude it from the party. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely47-158/+153
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-07spi: Add support for specifying 3-wire mode via device treeLars-Peter Clausen1-0/+2
This patch allows to specify that a SPI device is connected in 3-wire mode via device tree. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi: Fix comparison of different integer typesGrant Likely1-1/+1
Fix problem discovered with sparse: + drivers/spi/spi.c:1554:37: sparse: incompatible types in comparison expression (different signedness) drivers/spi/spi.c: In function 'spi_write_then_read': drivers/spi/spi.c:1554:23: warning: comparison of distinct pointer types lacks a cast [enabled by default] The change to SPI_BUFSIZ was introduced in commit b3a223ee2, "spi: Remove SPI_BUFSIZ restriction on spi_write_then_read()" Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi/orion: Add SPI_CHPA and SPI_CPOL support to kirkwood driver.Jason Gunthorpe1-1/+24
Support these transfer modes from the SPI layer by setting the appropriate register bits before doing the transfer. This was tested on the Marvell kirkwood SOC that uses this driver. Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Rolf Manderscheid <rvm@obsidianresearch.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi/sh: Add SH Mobile series as dependency to MSIOF controllerBastian Hecht1-2/+2
The MSIOF hardware block is used in the SH Mobile series as well, so we add it here. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi/sh-msiof: Remove unneeded clock nameBastian Hecht1-4/+2
clk_get() no longer needs a character string for associating the right clock as this is done via the device struct now. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi: Remove SPI_BUFSIZ restriction on spi_write_then_read()Mark Brown1-13/+11
In order to avoid constantly allocating and deallocating there is a fixed buffer which spi_write_then_read() uses for transfers, with an early error check to ensure that the transfer fits within the buffer. This limits the size of transfers to this size, currently max(32, SMP_CACHE_BYTES). Since we can dynamically allocate and in fact already have a fallback to do so when there is contention for the fixed buffer remove this restriction and instead dynamically allocate a suitably sized buffer if the transfer won't fit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06spi/stmp: remove obsolete driverWolfram Sang3-671/+0
This driver is obsolete and can't even be built anymore since the platform it depends has been removed. The STMP series is completely covered by the MXS platform these days, so spi-mxs can be used instead. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06Merge branch 'spi-next' from ↵Grant Likely10-77/+2158
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git Pull in the changes Mark has queued up for SPI
2012-12-05spi/clps711x: New SPI master driverAlexander Shiyan3-0/+304
This patch add new driver for CLPS711X SPI master controller. Due to platform limitations driver supports only 8 bit transfer mode. Chip select control is handled via GPIO. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-03spi: omap2-mcspi: remove duplicate inclusion of linux/err.hSachin Kamat1-1/+0
linux/err.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-03spi: omap2-mcspi: Fix the redifine warningShubhrajyoti D1-3/+0
Fix the below warning drivers/spi/spi-omap2-mcspi.c:336:34: warning: symbol 'tx' shadows an earlier one drivers/spi/spi-omap2-mcspi.c:327:12: originally declared here So delete the u8 tx as it is assigned and not used(resigned afterwards). Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-30spi / ACPI: add ACPI enumeration supportMika Westerberg1-1/+102
ACPI 5 introduced SPISerialBus resource that allows us to enumerate and configure the SPI slave devices behind the SPI controller. This patch adds support for this to the SPI core. In addition we bind ACPI nodes to SPI devices. This makes it possible for the slave drivers to get the ACPI handle for further configuration. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-29of/spi: Honour "status=disabled" property of deviceAlexander Sverdlin1-1/+1
Currently of_register_spi_devices() function registers all SPI devices, independetly from their status property in device tree. According to "ePAPR 1.1" spec, device should only be registered if there is no "status" property, or it has "ok" (or "okay") value (see of_device_is_available()). In case of "platform devices", of_platform_device_create_pdata() checks for "status" and ensures that disabled devices are not pupulated. But such check for SPI buses was missing until now. Fix it. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@sysgo.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-23spi/sh-hspi: add CS manual control supportPhil Edworthy1-2/+41
The current HSPI driver used automatic CS control, leading to CS active for each byte transmitted. This patch changes the driver to manual CS control, and ensures CS is active thoughout a whole message. Additionally, it uses the cs_change field to determine if CS is disabled between transfers in the message. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-21of_spi: add generic binding support to specify cs gpioJean-Christophe PLAGNIOL-VILLARD1-3/+51
This will allow to use gpio for chip select with no modification in the driver binding When use the cs-gpios, the gpio number will be passed via the cs_gpio field and the number of chip select will automatically increased with max(hw cs, gpio cs). So if for example the controller has 2 CS lines, and the cs-gpios property looks like this: cs-gpios = <&gpio1 0 0> <0> <&gpio1 1 0> <&gpio1 2 0>; Then it should be configured so that num_chipselect = 4 with the following mapping: cs0 : &gpio1 0 0 cs1 : native cs2 : &gpio1 1 0 cs3 : &gpio1 2 0 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: spi-devel-general@lists.sourceforge.net Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [grant.likely: fixed up type of cs count so min() can do type checking] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-14spi: omap2-mcspi: remove duplicated include from spi-omap2-mcspi.cWei Yongjun1-1/+0
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-14spi/bitbang: (cosmetic) simplify list manipulationGuennadi Liakhovetski1-5/+3
Use a proper list iterator instead of an open-coded loop and remove a superfluous list head initialisation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-14spi/bitbang: avoid needless loop flow manipulationsGuennadi Liakhovetski1-11/+8
This patch makes a loop look cleaner by replacing a "break" and a "continue" in its body by a single "if". Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 16:15:03 +0000