summaryrefslogtreecommitdiffstats
path: root/drivers/spi
AgeCommit message (Collapse)AuthorFilesLines
2020-08-06Merge tag 'sound-5.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This became wide and scattered updates all over the sound tree as diffstat shows: lots of (still ongoing) refactoring works in ASoC, fixes and cleanups caught by static analysis, inclusive term conversions as well as lots of new drivers. Below are highlights: ASoC core: - API cleanups and conversions to the unified mute_stream() call - Simplify I/O helper functions - Use helper macros to retrieve RTD from substreams ASoC drivers: - Lots of fixes and cleanups in Intel ASoC drivers - Lots of new stuff: Freescale MQS and i.MX6sx, Intel KeemBay I2S, Maxim MAX98360A and MAX98373 SoundWire, various Mediatek boards, nVidia Tegra 186 and 210, RealTek RL6231, Samsung Midas and Aries boards, TI J721e EVM ALSA core: - Minor code refacotring for SG-buffer handling HD-audio: - Generalization of mute-LED handling with LED classdev - Intel silent stream support for HDMI - Device-specific fixes: CA0132, Loongson-3 Others: - Usual USB- and HD-audio quirks for various devices - Fixes for echoaudio DMA position handling - Various documents and trivial fixes for sparse warnings - Conversion to adopt inclusive terms" * tag 'sound-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (479 commits) ALSA: pci: delete repeated words in comments ALSA: isa: delete repeated words in comments ALSA: hda/tegra: Add 100us dma stop delay ALSA: hda: Add dma stop delay variable ASoC: hda/tegra: Set buffer alignment to 128 bytes ALSA: seq: oss: Serialize ioctls ALSA: hda/hdmi: Add quirk to force connectivity ALSA: usb-audio: add startech usb audio dock name ALSA: usb-audio: Add support for Lenovo ThinkStation P620 Revert "ALSA: hda: call runtime_allow() for all hda controllers" ALSA: hda/ca0132 - Fix AE-5 microphone selection commands. ALSA: hda/ca0132 - Add new quirk ID for Recon3D. ALSA: hda/ca0132 - Fix ZxR Headphone gain control get value. ALSA: hda/realtek: Add alc269/alc662 pin-tables for Loongson-3 laptops ALSA: docs: fix typo ALSA: doc: use correct config variable name ASoC: core: Two step component registration ASoC: core: Simplify snd_soc_component_initialize declaration ASoC: core: Relocate and expose snd_soc_component_initialize ASoC: sh: Replace 'select' DMADEVICES 'with depends on' ...
2020-08-06Merge tag 'sched-fifo-2020-08-04' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ...
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-08-03Merge tag 'spi-v5.9' of ↵Linus Torvalds54-759/+2545
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A fairly quiet release for SPI, nothing really going on in the core although there's been quite a bit of driver related activity. This includes the addition of some shared code in drivers/memory for the Renesas RPC-IF which is used by a newly added SPI driver, the memory subsystem doesn't seem to have a fixed maintainer at the minute and this seemed like the most sensible way to get that hardware supported. - Quite a few cleanups and optimizations for the Altera, Qualcomm GENI, sun6i and lantiq drivers. - Several more GPIO descriptor conversions. - Move the Cadence QuadSPI driver from drivers/mtd to drivers/spi. - New support for Mediatek MT8192 and Renesas RPC-IF, R8A7742 and R8A774e1" * tag 'spi-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (119 commits) dt-bindings: lpspi: New property in document DT bindings for LPSPI spi: lpspi: fix using CS discontinuously on i.MX8DXLEVK spi: lpspi: remove unused fsl_lpspi->chipselect spi: lpspi: Fix kernel warning dump when probe fail after calling spi_register spi: rockchip: Fix error in SPI slave pio read spi: rockchip: Support 64-location deep FIFOs spi: rockchip: Config spi rx dma burst size depend on xfer length spi: spi-topcliff-pch: drop call to wakeup-disable spi: spidev: Align buffers for DMA spi: correct kernel-doc inconsistency spi: sun4i: update max transfer size reported spi: imx: enable runtime pm support spi: update bindings for MT8192 SoC spi: mediatek: add spi support for mt8192 IC spi: Add bindings for Lightning Mountain SoC spi: lantiq: Add support to Lightning Mountain SoC spi: lantiq: Move interrupt configuration to SoC specific data structure spi: lantiq: Add fifo size bit mask in SoC specific data structure spi: lantiq: Add support to acknowledge interrupt spi: lantiq: Move interrupt control register offesets to SoC specific data structure ...
2020-08-03Merge tag 'arm-drivers-5.9' of ↵Linus Torvalds2-78/+232
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "A couple of subsystems have their own subsystem maintainers but choose to have the code merged through the soc tree as upstream, as the code tends to be used across multiple SoCs or has SoC specific drivers itself: - memory controllers: Krzysztof Kozlowski takes ownership of the drivers/memory subsystem and its drivers, starting out with a set of cleanup patches. A larger driver for the Tegra memory controller that was accidentally missed for v5.8 is now added. - reset controllers: Only minor updates to drivers/reset this time - firmware: The "turris mox" firmware driver gains support for signed firmware blobs The tegra firmware driver gets extended to export some debug information Various updates to i.MX firmware drivers, mostly cosmetic - ARM SCMI/SCPI: A new mechanism for platform notifications is added, among a number of minor changes. - optee: Probing of the TEE bus is rewritten to better support detection of devices that depend on the tee-supplicant user space. A new firmware based trusted platform module (fTPM) driver is added based on OP-TEE - SoC attributes: A new driver is added to provide a generic soc_device for identifying a machine through the SMCCC ARCH_SOC_ID firmware interface rather than by probing SoC family specific registers. The series also contains some cleanups to the common soc_device code. There are also a number of updates to SoC specific drivers, the main ones are: - Mediatek cmdq driver gains a few in-kernel interfaces - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding support for additional SoC variants - The Qualcomm GENI core code gains interconnect path voting and performance level support, and integrating this into a number of device drivers. - A new driver for Samsung Exynos5800 voltage coupler for - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC specific device drivers - Updates to the TI K3 Ring Accelerator driver" * tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits) soc: qcom: geni: Fix unused label warning soc: qcom: smd-rpm: Fix kerneldoc memory: jz4780_nemc: Only request IO memory the driver will use soc: qcom: pdr: Reorder the PD state indication ack MAINTAINERS: Add Git repository for memory controller drivers memory: brcmstb_dpfe: Fix language typo memory: samsung: exynos5422-dmc: Correct white space issues memory: samsung: exynos-srom: Correct alignment memory: pl172: Enclose macro argument usage in parenthesis memory: of: Correct kerneldoc memory: omap-gpmc: Fix language typo memory: omap-gpmc: Correct white space issues memory: omap-gpmc: Use 'unsigned int' for consistency memory: omap-gpmc: Enclose macro argument usage in parenthesis memory: omap-gpmc: Correct kerneldoc memory: mvebu-devbus: Align with open parenthesis memory: mvebu-devbus: Add missing braces to all arms of if statement memory: bt1-l2-ctl: Add blank lines after declarations soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones ...
2020-07-31Merge remote-tracking branch 'asoc/for-5.8' into asoc-linusMark Brown1-1/+1
2020-07-29Merge remote-tracking branch 'spi/for-5.9' into spi-nextMark Brown53-758/+2532
2020-07-29Merge remote-tracking branch 'spi/for-5.8' into spi-linusMark Brown1-1/+13
2020-07-29spi: lpspi: fix using CS discontinuously on i.MX8DXLEVKClark Wang1-3/+8
SPI common code does not support using CS discontinuously for now. However, i.MX8DXL-EVK only uses CS1 without CS0. Therefore, add a flag is_only_cs1 to set the correct TCR[PCS]. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Link: https://lore.kernel.org/r/20200727031448.31661-4-xiaoning.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-29spi: lpspi: remove unused fsl_lpspi->chipselectClark Wang1-2/+0
The cs-gpio is initailized by spi_get_gpio_descs() now. Remove the chipselect. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Link: https://lore.kernel.org/r/20200727031448.31661-3-xiaoning.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-29spi: lpspi: Fix kernel warning dump when probe fail after calling spi_registerClark Wang1-6/+6
Calling devm_spi_register_controller() too early will cause problem. When probe failed occurs after calling devm_spi_register_controller(), the call of spi_controller_put() will trigger the following warning dump. [ 2.092138] ------------[ cut here ]------------ [ 2.096876] kernfs: can not remove 'uevent', no directory [ 2.102440] WARNING: CPU: 0 PID: 181 at fs/kernfs/dir.c:1503 kernfs_remove_by_name_ns+0xa0/0xb0 [ 2.111142] Modules linked in: [ 2.114207] CPU: 0 PID: 181 Comm: kworker/0:7 Not tainted 5.4.24-05024-g775c6e8a738c-dirty #1314 [ 2.122991] Hardware name: Freescale i.MX8DXL EVK (DT) [ 2.128141] Workqueue: events deferred_probe_work_func [ 2.133281] pstate: 60000005 (nZCv daif -PAN -UAO) [ 2.138076] pc : kernfs_remove_by_name_ns+0xa0/0xb0 [ 2.142958] lr : kernfs_remove_by_name_ns+0xa0/0xb0 [ 2.147837] sp : ffff8000122bba70 [ 2.151145] x29: ffff8000122bba70 x28: ffff8000119d6000 [ 2.156462] x27: 0000000000000000 x26: ffff800011edbce8 [ 2.161779] x25: 0000000000000000 x24: ffff00003ae4f700 [ 2.167096] x23: ffff000010184c10 x22: ffff00003a3d6200 [ 2.172412] x21: ffff800011a464a8 x20: ffff000010126a68 [ 2.177729] x19: ffff00003ae5c800 x18: 000000000000000e [ 2.183046] x17: 0000000000000001 x16: 0000000000000019 [ 2.188362] x15: 0000000000000004 x14: 000000000000004c [ 2.193679] x13: 0000000000000000 x12: 0000000000000001 [ 2.198996] x11: 0000000000000000 x10: 00000000000009c0 [ 2.204313] x9 : ffff8000122bb7a0 x8 : ffff00003a3d6c20 [ 2.209630] x7 : ffff00003a3d6380 x6 : 0000000000000001 [ 2.214946] x5 : 0000000000000001 x4 : ffff00003a05eb18 [ 2.220263] x3 : 0000000000000005 x2 : ffff8000119f1c48 [ 2.225580] x1 : 2bcbda323bf5a800 x0 : 0000000000000000 [ 2.230898] Call trace: [ 2.233345] kernfs_remove_by_name_ns+0xa0/0xb0 [ 2.237879] sysfs_remove_file_ns+0x14/0x20 [ 2.242065] device_del+0x12c/0x348 [ 2.245555] device_unregister+0x14/0x30 [ 2.249492] spi_unregister_controller+0xac/0x120 [ 2.254201] devm_spi_unregister+0x10/0x18 [ 2.258304] release_nodes+0x1a8/0x220 [ 2.262055] devres_release_all+0x34/0x58 [ 2.266069] really_probe+0x1b8/0x318 [ 2.269733] driver_probe_device+0x54/0xe8 [ 2.273833] __device_attach_driver+0x80/0xb8 [ 2.278194] bus_for_each_drv+0x74/0xc0 [ 2.282034] __device_attach+0xdc/0x138 [ 2.285876] device_initial_probe+0x10/0x18 [ 2.290063] bus_probe_device+0x90/0x98 [ 2.293901] deferred_probe_work_func+0x64/0x98 [ 2.298442] process_one_work+0x198/0x320 [ 2.302451] worker_thread+0x1f0/0x420 [ 2.306208] kthread+0xf0/0x120 [ 2.309352] ret_from_fork+0x10/0x18 [ 2.312927] ---[ end trace 58abcdfae01bd3c7 ]--- So put this function at the end of the probe sequence. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Link: https://lore.kernel.org/r/20200727031448.31661-2-xiaoning.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28spi: rockchip: Fix error in SPI slave pio readJon Lin1-1/+1
The RXFLR is possible larger than rx_left in Rockchip SPI, fix it. Fixes: 01b59ce5dac8 ("spi: rockchip: use irq rather than polling") Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20200723004356.6390-3-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28spi: rockchip: Support 64-location deep FIFOsJon Lin1-11/+14
The FIFO depth of SPI V2 is 64 instead of 32, add support for it. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20200723004356.6390-2-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28spi: rockchip: Config spi rx dma burst size depend on xfer lengthJon Lin1-2/+17
The burst length can be adjusted according to the transmission length to improve the transmission rate Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20200723004356.6390-1-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28spi: spi-topcliff-pch: drop call to wakeup-disableVaibhav Gupta1-2/+0
Before generic upgrade, both .suspend() and .resume() were invoking pci_enable_wake(pci_dev, PCI_D3hot, 0). Hence, disabling wakeup in both states. (Normal trend is .suspend() enables and .resume() disables the wakeup.) This was ambiguous and may be buggy. Instead of replicating the legacy behavior, drop the wakeup-disable call. Fixes: f185bcc77980 ("spi: spi-topcliff-pch: use generic power management") Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200727172936.661567-1-vaibhavgupta40@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28spi: spidev: Align buffers for DMAChristian Eggers1-8/+13
Simply copying all xfers from userspace into one bounce buffer causes alignment problems if the SPI controller uses DMA. Ensure that all transfer data blocks within the rx and tx bounce buffers are aligned for DMA (according to ARCH_KMALLOC_MINALIGN). Alignment may increase the usage of the bounce buffers. In some cases, the buffers may need to be increased using the "bufsiz" module parameter. Signed-off-by: Christian Eggers <ceggers@arri.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-27spi: sun4i: update max transfer size reportedJonathan Liu1-1/+1
The spi-sun4i driver already has the ability to do large transfers. However, the max transfer size reported is still fifo depth - 1. Update the max transfer size reported to the max value possible. Fixes: 196737912da5 ("spi: sun4i: Allow transfers larger than FIFO size") Signed-off-by: Jonathan Liu <net147@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20200727072328.510798-1-net147@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-27spi: imx: enable runtime pm supportClark Wang1-33/+88
Enable runtime pm support for spi-imx driver. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Link: https://lore.kernel.org/r/20200727063354.17031-1-xiaoning.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: mediatek: add spi support for mt8192 ICleilk.liu1-0/+3
This patch add spi support for mt8192 IC. Signed-off-by: leilk.liu <leilk.liu@mediatek.com> Link: https://lore.kernel.org/r/20200721122436.31544-2-leilk.liu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: lantiq: Add support to Lightning Mountain SoCDilip Kota2-2/+42
Add support to SPI controller on Intel Atom based Lightning Mountain SoC which reuses Lantiq SPI controller IP. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Link: https://lore.kernel.org/r/4d61a75381aca9479f9fc15d07a7b05534da6bb3.1594957019.git.eswara.kota@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: lantiq: Move interrupt configuration to SoC specific data structureDilip Kota1-25/+39
Moving interrupt configuration to SoC specific data structure helps to add support for newer SoCs on which SPI controller with lesser interrupt lines compared to existing chipsets. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Link: https://lore.kernel.org/r/7eb6d863515245fedfa0296c72082df107367d07.1594957019.git.eswara.kota@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: lantiq: Add fifo size bit mask in SoC specific data structureDilip Kota1-10/+9
On newer chipsets, SPI controller has fifos of larger size. So add the fifo size bit mask entry in SoC specific data structure. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Link: https://lore.kernel.org/r/a0889abf17a9fbc7077f10be0f0342b7ebdf9361.1594957019.git.eswara.kota@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: lantiq: Add support to acknowledge interruptDilip Kota1-0/+13
On newer chipsets interrupt need to be acknowledged as they use different interrupt controller which does not acknowledge the interrupts automatically. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Link: https://lore.kernel.org/r/608923b484d9ef239b44bb545c0b79b27030a6ae.1594957019.git.eswara.kota@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: lantiq: Move interrupt control register offesets to SoC specific data ↵Dilip Kota1-8/+12
structure Address of Interrupt control registers are different on new chipsets. So move them to SoC specific data structure. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Link: https://lore.kernel.org/r/f0f9723a30ea9c2ee48d2199f7512af9e15803b0.1594957019.git.eswara.kota@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: lantiq: Add SMP supportDilip Kota1-0/+7
Existing driver supports only single core SoC. New multicore platforms uses the same driver/IP so SMP support is required. This patch adds multicore support in the driver. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Link: https://lore.kernel.org/r/d6663296b41f102c582fda08e71f62b72ca05d5d.1594957019.git.eswara.kota@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: lantiq: fix: Rx overflow error in full duplex modeDilip Kota1-0/+10
In full duplex mode, rx overflow error is observed. To overcome the error, wait until the complete data got received and proceed further. Fixes: 17f84b793c01 ("spi: lantiq-ssc: add support for Lantiq SSC SPI controller") Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Link: https://lore.kernel.org/r/efb650b0faa49a00788c4e0ca8ef7196bdba851d.1594957019.git.eswara.kota@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: spi-topcliff-pch: use generic power managementVaibhav Gupta1-38/+13
Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers. With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs. This driver makes use of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), pci_enable_wake() and pci_set_power_state() to do required operations. In generic mode, they are no longer needed. Change function parameter in both .suspend() and .resume() to "struct device*" type. Use dev_get_drvdata() to get drv data. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Link: https://lore.kernel.org/r/20200720155714.714114-1-vaibhavgupta40@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: ppc4xx: Convert to use GPIO descriptorsLinus Walleij1-95/+11
This converts the PPC4xx SPI driver to use GPIO descriptors. The driver is already just picking some GPIOs from the device tree so the conversion is pretty straight forward. However this driver is looking form a pure "gpios" property rather than the standard binding "cs-gpios" so we need to add a new exception to the gpiolib OF parser to allow this for this driver's compatibles. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20200714072226.26071-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: spi-cadence: add support for chip select highShreyas Joshi1-1/+1
The spi cadence driver should support spi-cs-high in mode bits so that the peripherals that needs the chip select to be high active can use it. Add the SPI-CS-HIGH flag in the supported mode bits. Signed-off-by: Shreyas Joshi <shreyas.joshi@biamp.com> Link: https://lore.kernel.org/r/20200710211655.1564-1-shreyas.joshi@biamp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: lpspi: fix the imbalance of runtime pm function callClark Wang1-1/+6
Call the put function after probe successfully. Otherwise, the lpspi module will keep active status until the first spi transfer called. Disable runtime pm when probe fails. There is no need to active runtime pm after probe failed. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Link: https://lore.kernel.org/r/20200714075251.12777-2-xiaoning.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-21spi: dw-dma: Fix Tx DMA channel working too fastSerge Semin1-1/+13
It turns out having a Rx DMA channel serviced with higher priority than a Tx DMA channel is not enough to provide a well balanced DMA-based SPI transfer interface. There might still be moments when the Tx DMA channel is occasionally handled faster than the Rx DMA channel. That in its turn will eventually cause the SPI Rx FIFO overflow if SPI bus speed is high enough to fill the SPI Rx FIFO in before it's cleared by the Rx DMA channel. That's why having the DMA-based SPI Tx interface too optimized is the errors prone, so the commit 0b2b66514fc9 ("spi: dw: Use DMA max burst to set the request thresholds") though being perfectly normal from the standard functionality point of view implicitly introduced the problem described above. In order to fix that the Tx DMA activity is intentionally slowed down by limiting the SPI Tx FIFO depth with a value twice bigger than the Tx burst length calculated earlier by the dw_spi_dma_maxburst_init() method. Fixes: 0b2b66514fc9 ("spi: dw: Use DMA max burst to set the request thresholds") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Feng Tang <feng.tang@intel.com> Link: https://lore.kernel.org/r/20200721203951.2159-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-20spi: lantiq-ssc: Fix warning by using WQ_MEM_RECLAIMHauke Mehrtens1-1/+1
The lantiq-ssc driver uses internally an own workqueue to wait till the data is not only written out of the FIFO but really written to the wire. This workqueue is flushed while the SPI subsystem is working in some other system workqueue. The system workqueue is marked as WQ_MEM_RECLAIM, but the workqueue in the lantiq-ssc driver does not use WQ_MEM_RECLAIM for now. Add this flag too to prevent this warning. This fixes the following warning: [ 2.975956] WARNING: CPU: 1 PID: 17 at kernel/workqueue.c:2614 check_flush_dependency+0x168/0x184 [ 2.984752] workqueue: WQ_MEM_RECLAIM kblockd:blk_mq_run_work_fn is flushing !WQ_MEM_RECLAIM 1e100800.spi:0x0 Fixes: 891b7c5fbf61 ("mtd_blkdevs: convert to blk-mq") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Link: https://lore.kernel.org/r/20200717215648.20522-1-hauke@hauke-m.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17Merge tag 'spi-fix-v5.8-rc5' of ↵Linus Torvalds2-15/+14
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into master Pull spi fixes from Mark Brown: "A couple of small driver specific fixes for fairly minor issues" * tag 'spi-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate spi: mediatek: use correct SPI_CFG2_REG MACRO
2020-07-17spi: spi-amd: Do not define 'struct acpi_device_id' when !CONFIG_ACPILee Jones1-0/+2
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, struct 'spi_acpi_match' becomes defined but unused. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-amd.c:297:36: warning: ‘spi_acpi_match’ defined but not used [-Wunused-const-variable=] 297 | static const struct acpi_device_id spi_acpi_match[] = { | ^~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Sanjay R Mehta <sanju.mehta@amd.com> Link: https://lore.kernel.org/r/20200717135424.2442271-15-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-pxa2xx: Do not define 'struct acpi_device_id' when !CONFIG_ACPILee Jones1-0/+2
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, struct 'pxa2xx_spi_acpi_match' becomes defined but unused. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-pxa2xx.c:1435:36: warning: ‘pxa2xx_spi_acpi_match’ defined but not used [-Wunused-const-variable=] 1435 | static const struct acpi_device_id pxa2xx_spi_acpi_match[] = { | ^~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Link: https://lore.kernel.org/r/20200717135424.2442271-14-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-at91-usart: Remove unused OF table 'struct of_device_id'Lee Jones1-7/+0
The only way this driver can be probed by MFD via its parent device. No other reference to 'microchip,at91sam9g45-usart-spi' exists in the kernel. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-at91-usart.c:684:34: warning: ‘at91_usart_spi_dt_ids’ defined but not used [-Wunused-const-variable=] 684 | static const struct of_device_id at91_usart_spi_dt_ids[] = { | ^~~~~~~~~~~~~~~~~~~~~ Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Radu Pirea <radu_nicolae.pirea@upb.ro> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20200717135424.2442271-13-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-topcliff-pch: Add missing descriptions to 'struct pch_spi_data'Lee Jones1-2/+6
Fixes the following W=1 kernel build warning(s): drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'io_base_addr' not described in 'pch_spi_data' drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'pkt_tx_buff' not described in 'pch_spi_data' drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'pkt_rx_buff' not described in 'pch_spi_data' drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'dma' not described in 'pch_spi_data' drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'use_dma' not described in 'pch_spi_data' drivers/spi/spi-topcliff-pch.c:184: warning: Function parameter or member 'save_total_len' not described in 'pch_spi_data' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200717135424.2442271-12-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-zynqmp-gqspi: Correct a couple of misspellings in kerneldocLee Jones1-3/+3
Fixes the following W=1 kernel build warning(s): drivers/spi/spi-zynqmp-gqspi.c:205: warning: Function parameter or member 'slavecs' not described in 'zynqmp_gqspi_selectslave' drivers/spi/spi-zynqmp-gqspi.c:205: warning: Function parameter or member 'slavebus' not described in 'zynqmp_gqspi_selectslave' drivers/spi/spi-zynqmp-gqspi.c:205: warning: Excess function parameter 'flashcs' description in 'zynqmp_gqspi_selectslave' drivers/spi/spi-zynqmp-gqspi.c:205: warning: Excess function parameter 'flashbus' description in 'zynqmp_gqspi_selectslave' drivers/spi/spi-zynqmp-gqspi.c:902: warning: Function parameter or member 'dev' not described in 'zynqmp_qspi_suspend' drivers/spi/spi-zynqmp-gqspi.c:902: warning: Excess function parameter '_dev' description in 'zynqmp_qspi_suspend' Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20200717135424.2442271-11-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-zynq-qspi: Add description for 2 missing attributes/parametersLee Jones1-1/+2
Fixes the following W=1 kernel build warning(s): drivers/spi/spi-zynq-qspi.c:143: warning: Function parameter or member 'dev' not described in 'zynq_qspi' drivers/spi/spi-zynq-qspi.c:334: warning: Function parameter or member 'spi' not described in 'zynq_qspi_config_op' drivers/spi/spi-zynq-qspi.c:334: warning: Excess function parameter 'qspi' description in 'zynq_qspi_config_op' Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Cc: Sureshkumar Relli <nagasure@xilinx.com> Link: https://lore.kernel.org/r/20200717135424.2442271-10-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-pl022: Provide missing struct attribute/function param docsLee Jones1-3/+9
Also demote non-worthy kerneldoc headers to standard comment blocks. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-pl022.c:304: warning: cannot understand function prototype: 'enum ssp_writing ' drivers/spi/spi-pl022.c:330: warning: Function parameter or member 'loopback' not described in 'vendor_data' drivers/spi/spi-pl022.c:398: warning: Function parameter or member 'rx_lev_trig' not described in 'pl022' drivers/spi/spi-pl022.c:398: warning: Function parameter or member 'tx_lev_trig' not described in 'pl022' drivers/spi/spi-pl022.c:398: warning: Function parameter or member 'dma_running' not described in 'pl022' drivers/spi/spi-pl022.c:670: warning: Function parameter or member 'pl022' not described in 'readwriter' drivers/spi/spi-pl022.c:1250: warning: Function parameter or member 'irq' not described in 'pl022_interrupt_handler' drivers/spi/spi-pl022.c:1250: warning: Function parameter or member 'dev_id' not described in 'pl022_interrupt_handler' drivers/spi/spi-pl022.c:1343: warning: Function parameter or member 'pl022' not described in 'set_up_next_transfer' drivers/spi/spi-pl022.c:1343: warning: Function parameter or member 'transfer' not described in 'set_up_next_transfer' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Sachin Verma <sachin.verma@st.com> Link: https://lore.kernel.org/r/20200717135424.2442271-9-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-s3c64xx: Add missing entries for structs 's3c64xx_spi_dma_data' and ↵Lee Jones1-1/+8
's3c64xx_spi_dma_data' Fixes the following W=1 kernel build warning(s): drivers/spi/spi-s3c64xx.c:150: warning: Function parameter or member 'quirks' not described in 's3c64xx_spi_port_config' drivers/spi/spi-s3c64xx.c:150: warning: Function parameter or member 'clk_ioclk' not described in 's3c64xx_spi_port_config' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'pdev' not described in 's3c64xx_spi_driver_data' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'rx_dma' not described in 's3c64xx_spi_driver_data' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'tx_dma' not described in 's3c64xx_spi_driver_data' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'port_conf' not described in 's3c64xx_spi_driver_data' drivers/spi/spi-s3c64xx.c:189: warning: Function parameter or member 'port_id' not described in 's3c64xx_spi_driver_data' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Andi Shyti <andi@etezian.org> Cc: Jaswinder Singh <jassi.brar@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Link: https://lore.kernel.org/r/20200717135424.2442271-8-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-meson-spicc: Remove set but never used variable 'data' from ↵Lee Jones1-3/+1
meson_spicc_reset_fifo() Looks like it hasn't ever been checked. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-meson-spicc.c: In function ‘meson_spicc_reset_fifo’: drivers/spi/spi-meson-spicc.c:365:6: warning: variable ‘data’ set but not used [-Wunused-but-set-variable] 365 | u32 data; | ^~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: linux-amlogic@lists.infradead.org Link: https://lore.kernel.org/r/20200717135424.2442271-7-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-meson-spifc: Fix misdocumenting of 'dev' in 'struct meson_spifc'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/spi/spi-meson-spifc.c:80: warning: Function parameter or member 'dev' not described in 'meson_spifc' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: linux-amlogic@lists.infradead.org Link: https://lore.kernel.org/r/20200717135424.2442271-6-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-ep93xx: Fix API slippageLee Jones1-1/+1
ep93xx_spi_read_write() changed is parameters, but the function documentation was left unchanged. Let's realign. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-ep93xx.c:227: warning: Function parameter or member 'master' not described in 'ep93xx_spi_read_write' drivers/spi/spi-ep93xx.c:227: warning: Excess function parameter 'espi' description in 'ep93xx_spi_read_write' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Mika Westerberg <mika.westerberg@iki.fi> Link: https://lore.kernel.org/r/20200717135424.2442271-5-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-davinci: Fix a few kerneldoc misspellings and API slippagesLee Jones1-3/+4
Fixes the following W=1 kernel build warning(s): drivers/spi/spi-davinci.c:249: warning: Function parameter or member 'dspi' not described in 'davinci_spi_get_prescale' drivers/spi/spi-davinci.c:249: warning: Function parameter or member 'max_speed_hz' not described in 'davinci_spi_get_prescale' drivers/spi/spi-davinci.c:249: warning: Excess function parameter 'maxspeed_hz' description in 'davinci_spi_get_prescale' drivers/spi/spi-davinci.c:719: warning: Function parameter or member 'data' not described in 'dummy_thread_fn' drivers/spi/spi-davinci.c:719: warning: Excess function parameter 'context_data' description in 'dummy_thread_fn' drivers/spi/spi-davinci.c:735: warning: Function parameter or member 'data' not described in 'davinci_spi_irq' drivers/spi/spi-davinci.c:735: warning: Excess function parameter 'context_data' description in 'davinci_spi_irq' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200717135424.2442271-4-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-bitbang: Demote obvious misuse of kerneldoc to standard comment blocksLee Jones1-3/+3
No attempt has been made to document any of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-bitbang.c:181: warning: Function parameter or member 'spi' not described in 'spi_bitbang_setup' drivers/spi/spi-bitbang.c:215: warning: Function parameter or member 'spi' not described in 'spi_bitbang_cleanup' drivers/spi/spi-bitbang.c:434: warning: Function parameter or member 'bitbang' not described in 'spi_bitbang_stop' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200717135424.2442271-3-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: spi-loopback-test: Fix formatting issues in function header blocksLee Jones1-8/+8
Kerneldoc function parameter descriptions must be in '@.*: ' format. Fixes the following W=1 kernel build warning(s): drivers/spi/spi-loopback-test.c:897: warning: Function parameter or member 'spi' not described in 'spi_test_execute_msg' drivers/spi/spi-loopback-test.c:897: warning: Function parameter or member 'test' not described in 'spi_test_execute_msg' drivers/spi/spi-loopback-test.c:897: warning: Function parameter or member 'tx' not described in 'spi_test_execute_msg' drivers/spi/spi-loopback-test.c:897: warning: Function parameter or member 'rx' not described in 'spi_test_execute_msg' drivers/spi/spi-loopback-test.c:970: warning: Function parameter or member 'spi' not described in 'spi_test_run_test' drivers/spi/spi-loopback-test.c:970: warning: Function parameter or member 'test' not described in 'spi_test_run_test' drivers/spi/spi-loopback-test.c:970: warning: Function parameter or member 'tx' not described in 'spi_test_run_test' drivers/spi/spi-loopback-test.c:970: warning: Function parameter or member 'rx' not described in 'spi_test_run_test' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: linux-spi@vger.kernel.org Link: https://lore.kernel.org/r/20200717135424.2442271-2-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17Merge series "spi: bcm2835/bcm2835aux: support effective_speed_hz" from Marc ↵Mark Brown2-6/+6
Kleine-Budde <mkl@pengutronix.de>: Hello, I've picked up and forward ported Martin Sperl's patches which add support for effective_speed_hz to the SPI controllers found on all raspberry pi models. See the following patch, which adds this feature to the SPI core, for more information: 5d7e2b5ed585 spi: core: allow reporting the effectivly used speed_hz for a transfer regards, Marc _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2020-07-17spi: coldfire-qspi: Use clk_prepare_enable and clk_disable_unprepareQing Zhang1-2/+2
Convert clk_enable() to clk_prepare_enable() and clk_disable() to clk_disable_unprepare() respectively in the spi-coldfire-qspi.c. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Link: https://lore.kernel.org/r/1594790807-32319-2-git-send-email-zhangqing@loongson.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: Fix SPI NOR and SPI NAND acronymsTudor Ambarus3-7/+7
The industry refers to these flash types as "SPI NOR" and "SPI NAND". Be consistent and use the same acronyms. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200716051144.568606-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 09:51:56 +0000