summaryrefslogtreecommitdiffstats
path: root/drivers/spi
AgeCommit message (Collapse)AuthorFilesLines
2016-03-17Merge tag 'dmaengine-4.6-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-2/+10
Pull dmaengine updates from Vinod Koul: "This is smallish update with minor changes to core and new driver and usual updates. Nothing super exciting here.. - We have made slave address as physical to enable driver to do the mapping. - We now expose the maxburst for slave dma as new capability so clients can know this and program accordingly - addition of device synchronize callbacks on omap and edma. - pl330 updates to support DMAFLUSHP for Rockchip platforms. - Updates and improved sg handling in Xilinx VDMA driver. - New hidma qualcomm dma driver, though some bits are still in progress" * tag 'dmaengine-4.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits) dmaengine: IOATDMA: revise channel reset workaround on CB3.3 platforms dmaengine: add Qualcomm Technologies HIDMA channel driver dmaengine: add Qualcomm Technologies HIDMA management driver dmaengine: hidma: Add Device Tree binding dmaengine: qcom_bam_dma: move to qcom directory dmaengine: tegra: Move of_device_id table near to its user dmaengine: xilinx_vdma: Remove unnecessary variable initializations dmaengine: sirf: use __maybe_unused to hide pm functions dmaengine: rcar-dmac: clear pertinence number of channels dmaengine: sh: shdmac: don't open code of_device_get_match_data() dmaengine: tegra: don't open code of_device_get_match_data() dmaengine: qcom_bam_dma: Make driver work for BE dmaengine: sun4i: support module autoloading dma/mic_x100_dma: IS_ERR() vs PTR_ERR() typo dmaengine: xilinx_vdma: Use readl_poll_timeout instead of do while loop's dmaengine: xilinx_vdma: Simplify spin lock handling dmaengine: xilinx_vdma: Fix issues with non-parking mode dmaengine: xilinx_vdma: Improve SG engine handling dmaengine: pl330: fix to support the burst mode dmaengine: make slave address physical ...
2016-03-11Merge remote-tracking branches 'spi/topic/res', 'spi/topic/rockchip', ↵Mark Brown3-53/+148
'spi/topic/sh', 'spi/topic/ti-qspi' and 'spi/topic/xilinx' into spi-next
2016-03-11Merge remote-tracking branches 'spi/topic/lp8841', 'spi/topic/msg', ↵Mark Brown9-96/+730
'spi/topic/pl022' and 'spi/topic/pxa2xx' into spi-next
2016-03-11Merge remote-tracking branches 'spi/topic/doc', 'spi/topic/dw' and ↵Mark Brown3-19/+19
'spi/topic/flash' into spi-next
2016-03-11Merge remote-tracking branches 'spi/topic/acpi', 'spi/topic/axi-engine', ↵Mark Brown6-63/+701
'spi/topic/bcm2835' and 'spi/topic/bcm2835aux' into spi-next
2016-03-11Merge remote-tracking branch 'spi/topic/imx' into spi-nextMark Brown1-158/+183
2016-03-11Merge remote-tracking branch 'spi/topic/dma' into spi-nextMark Brown1-3/+3
2016-03-11Merge remote-tracking branch 'spi/topic/core' into spi-nextMark Brown1-0/+48
2016-03-11spi: Add gfp parameter to kernel-doc to fix build warningJavier Martinez Canillas1-0/+1
The spi_split_transfers_maxsize() gfp parameter is missing in the function kernel-doc so building gives the following warning: .//drivers/spi/spi.c:2359: warning: No description found for parameter 'gfp' Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-10spi: rockchip: covert rsd_nsecs to u32 typeShawn Lin1-1/+1
rsd_nsecs is defined as u8 memeber of struct rockchip_spi, but using of_property_read_u32. That means we take risk of truncation by type conversion if we pass on big value from dt. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-10spi: rockchip: header file cleanupShawn Lin1-10/+4
Remove some of unused header files and reoder it into alphabetical order. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-10Merge remote-tracking branch 'spi/fix/rockchip' into spi-linusMark Brown1-0/+3
2016-03-10Merge remote-tracking branch 'spi/fix/imx' into spi-linusMark Brown1-15/+2
2016-03-09spi: respect the maximum segment size of DMA deviceAndy Shevchenko1-3/+3
The device which is actually does DMA may have a limitation of the maximum segment size. Respect this setting when preparing scatter-gather list. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-09spi: rockchip: check requesting dma channel with EPROBE_DEFERShawn Lin1-1/+7
Let's defer probing the driver if the return value of dma_request_slave_channel is ERR_PTR(-EPROBE_DEFER) instead of disabling dma capability directly. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-09spi: rockchip: migrate to dmaengine_terminate_asyncShawn Lin1-2/+2
dmaengine_terminate_all is deprecated, let's use dmaengine_terminate_async for interrupt handling. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-09spi: rockchip: check return value of dmaengine_prep_slave_sgShawn Lin1-3/+12
We should check return value of dmaengine_prep_slave_sg, otherwise we take risk of null pointer. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-09spi: core: Fix deadlock when sending messagesJon Hunter1-12/+17
The function __spi_pump_messages() is called by spi_pump_messages() and __spi_sync(). The function __spi_sync() has an argument 'bus_locked' that indicates if it is called with the SPI bus mutex held or not. If 'bus_locked' is false then __spi_sync() will acquire the mutex itself. Commit 556351f14e74 ("spi: introduce accelerated read support for spi flash devices") made a change to acquire the SPI bus mutex within __spi_pump_messages(). However, this change did not check to see if the mutex is already held. If __spi_sync() is called with the mutex held (ie. 'bus_locked' is true), then a deadlock occurs when __spi_pump_messages() is called. Fix this deadlock by passing the 'bus_locked' state from __spi_sync() to __spi_pump_messages() and only acquire the mutex if not already held. In the case where __spi_pump_messages() is called from spi_pump_messages() it is assumed that the mutex is not held and so call __spi_pump_messages() with 'bus_locked' set to false. Finally, move the unlocking of the mutex to the end of the __spi_pump_messages() function to simplify the code and only call cond_resched() if there are no errors. Fixes: 556351f14e74 ("spi: introduce accelerated read support for spi flash devices") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-06spi/rockchip: fix endian mode for 16-bit transfersAlexander Kochetkov1-1/+2
16-bit transfers must be in big endian mode on wire. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05spi/rockchip: Make sure spi clk is on in rockchip_spi_set_csHuibin Hong1-1/+6
Rockchip_spi_set_cs could be called by spi_setup, but spi_setup may be called by device driver after runtime suspend. Then the spi clock is closed, rockchip_spi_set_cs may access the spi registers, which causes cpu block in some socs. Fixes: 64e36824b32 ("spi/rockchip: add driver for Rockchip RK3xxx") Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-04spi: pxa2xx: Use newer more explicit DMAengine terminate APIJarkko Nikula1-4/+4
Commit b36f09c3c441 ("dmaengine: Add transfer termination synchronization support") marked dmaengine_terminate_all() as deprecated and is being replaced by explicit synchronous and asynchronous terminate functions. Here DMA termination are done in two cases: FIFO overrun and module removal. FIFO overrun is handled in interrupt context and converting dmaengine_terminate_all() to dmaengine_terminate_async() does the same than before. Using synchronous termination in module removal however adds a bit more robustness as it waits all completion callbacks have finished. Although it looks all known DMA engines used with spi-pxa2xx don't implement device_synchronize() callback so this too appears to be a no-op in practice. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02spi: pxa2xx: Add support for Intel Broxton B-StepJarkko Nikula1-1/+5
Add support for third Intel Broxton variant and update comment for A-Step variant. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Steve Sakoman <steve.sakoman@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-26spi: lp-8841: return correct error code from probeArnd Bergmann1-2/+3
The spi_lp8841_rtc_probe() function misses an initialization of the return code when it fails to get its memory resource, as gcc notices: drivers/spi/spi-lp8841-rtc.c: In function 'spi_lp8841_rtc_probe': drivers/spi/spi-lp8841-rtc.c:239:9: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes the code to propagate the error from devm_ioremap_resource(). Fixes: 7ecbfff6711f ("spi: master driver to enable RTC on ICPDAS LP-8841") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Sergei Ianovich <ynvich@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-26spi: imx: drop bogus tests for rx/tx bufs in DMA transferSascha Hauer1-48/+34
The driver tries to be clever by only setting up DMA channels when the corresponding sg tables are non NULL. The sg tables are embedded structs in struct spi_transfer, so they are guaranteed to be non NULL which makes the if(tx)/if(rx) tests completely bogus. The driver even sets the SPI_MASTER_MUST_RX / SPI_MASTER_MUST_TX flags which makes sure the sg tables are not only present but also non empty. Drop the tests and make the DMA path easier to follow. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-26spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup functionSascha Hauer1-15/+6
Now that the config function knows whether we are doing DMA or not we can do the necessary register setup in the config function and no longer have to do this in the trigger function. With this the trigger function becomes a no-op for DMA, so instead of testing if we are doing DMA or not in the trigger function we simply no longer call it in the DMA case. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-26spi: imx: make some register defines simplerSascha Hauer1-9/+6
The watermark levels in the DMA register are write only, the driver should never have to read them back from the hardware. Replace the current _MASK and _OFFSET defines with defines taking the watermark level directly. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-26spi: imx: remove unnecessary bit clearing in mx51_ecspi_configSascha Hauer1-7/+0
This reverts patch 1476253cef (spi: imx: fix ecspi mode setup) The patch tried to fix something by clearing bits in the cfg variable, but cfg is initialized to zero on function entry. There are no bits to clear. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-26spi: imx: add support for all SPI word width for DMAAnton Bondarenko1-27/+91
DMA transfer for SPI was limited to up to 8 bits word size until now. Sync in SPI burst size and DMA bus width is necessary to correctly support 16 and 32 BPW. Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-26spi: imx: drop unncessary dma_is_inited variableSascha Hauer1-5/+1
There's no need for an extra dma_is_inited variable when we can equally well check for the existence of a DMA channel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-26spi: imx: drop unnecessary read/modify/writeSascha Hauer1-21/+10
When the MX51_ECSPI_DMA is configured we control every single bit of the register, so there's no need to read/modify/write it. Instead just write the value we want to have in the register. Also, drop unnecessary check if we are actually doing DMA. The values written to the register have no effect in PIO mode and value written there during the last DMA transfer is still in the register, so we can equally well always write a value. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-26spi: imx: initialize usedma earlierSascha Hauer1-7/+8
The SoC specific config function does not know if DMA will be used or not. This information will be useful to configure the SPI controller correctly for DMA in following patches, so initialize the usedma variable before calling into the SoC specific config function. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-24spi: imx: drop fallback to PIOSascha Hauer1-13/+6
At the moment the driver decides to fallback to PIO mode the buffers are already mapped for DMA. It's a bug to access them with the CPU afterwards, so we cannot just fallback to PIO mode. It should not be necessary anyway, since we only use DMA when we verified that it's possible in the fist place, so when prep_slave_sg fails it's a bug, either in the SDMA driver or in the can_dma implementation. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-24spi: master driver to enable RTC on ICPDAS LP-8841Sergei Ianovich3-0/+266
ICP DAS LP-8841 contains a DS-1302 RTC. This driver provides an SPI master which makes the RTC usable. The driver is not supposed to work with anything else. The driver uses the standard MicroWire half-duplex transfer timing. Master output is set on low clock and sensed by the RTC on the rising edge. Master input is set by the RTC on the trailing edge and is sensed by the master on low clock. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-22spi: make xmldocs warning caused by spi.cMasanari Iida1-2/+2
This patch fix following warnings while make xmldocs. .//drivers/spi/spi.c:2354: warning: Excess function parameter 'message' description in 'spi_split_transfers_maxsize' .//drivers/spi/spi.c:2354: warning: Excess function parameter 'max_size' description in 'spi_split_transfers_maxsize' Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-21spi: spi-pxa2xx-pci: Add ID and driver type for WildcatPoint PCHLeif Liddy1-0/+13
WildcatPoint PCH as seen on MacBook 12-inch (Early 2015) has a PCI enabled SPI controller. Enable it by adding its ID to the corresponding driver. The ACPI enumerated name for this SPI controller (found in spi-pxa2xx.c) is INT33C1. Therefore, we associate the SPI controller with the corresponding type of LPSS_LPT_SSP. Signed-off-by: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-21spi: pxa2xx: Remove unused DMA buffer mappingsJarkko Nikula2-4/+0
Only legacy PXA DMA implementation was using these rx_dma and tx_dma DMA addresses so they are not needed after commit 6356437e65c2 ("spi: spi-pxa2xx: remove legacy PXA DMA bits"). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-20spi: imx: replace fixed timeout with calculatedAnton Bondarenko1-3/+21
Fixed timeout value can fire while transaction is ongoing. This may happen because there are no strict requirements on SPI transaction duration. Dynamic timeout value is generated based on SCLK and transaction size. There is also 4 * SCLK delay between TX bursts related to HW internal CS change. Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-20Merge remote-tracking branch 'spi/fix/imx' into spi-imxMark Brown1-15/+2
2016-02-19spi: imx: fix spi resource leak with dma transferGao Pan1-3/+5
In spi_imx_dma_transfer(), when desc_rx = dmaengine_prep_slave_sg() fails, the context goes to label no_dma and then return. However, the memory allocated for desc_tx has not been freed yet, which leads to resource leak. Signed-off-by: Gao Pan <pandy.gao@nxp.com> Reviewed-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-18spi: Add cond_resched() in main message processing loopMark Brown1-0/+3
When a controller has only PIO support it is very likely that we will run into use cases where we spend a very large amount of time consuming CPU. Code that does this should call cond_resched() every once in a while to give other tasks more of a chance to run so do that in the main SPI loop, the overhead is negligable if it's not needed. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-18spi: docbook: add missing parameter documentationMartin Sperl1-0/+1
Add missing docbook documentation for the gfp parameter in function spi_replace_transfers. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-18Merge tag 'spi-fix-v4.5-rc4' into spi-imxMark Brown6-7/+14
spi: Fixes for v4.5 A small clutch of driver specific fixes. The OMAP one is a bit worrying since it seems to be triggered by some changes in the runtime PM core code and I suspect there's other drivers across that are going to be using the same pattern outside of OMAP but nothing seems to be coming up in the testing people are doing.
2016-02-18spi: sh-spi, sh-msiof, rspi: Use ARCH_RENESASSimon Horman1-3/+3
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-18spi: rockchip: add bindings for rk3399 spiXu Jianqun1-0/+1
Add devicetree bindings for Rockchip rk3399 spi which found on Rockchip rk3399 SoCs. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-17spi: core: Use min_t(size_t,..)Fabio Estevam1-1/+1
Use min_t(size_t,..) in order to avoid the following build warning on ARM64: include/linux/kernel.h:754:17: warning: comparison of distinct pointer types lacks a cast (void) (&_min1 == &_min2); \ ^ drivers/spi/spi.c:2304:17: note: in expansion of macro 'min' xfers[0].len = min(maxsize, xfer[0].len); Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-17spi: core: Use %zu for printing 'size_t' typeFabio Estevam1-1/+1
Use %zu for printing 'size_t' type in order to fix the following build warning on ARM64: drivers/spi/spi.c: In function '__spi_split_transfer_maxsize': drivers/spi/spi.c:2278:2: warning: format '%i' expects argument of type 'int', but argument 4 has type 'size_t' [-Wformat=] Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-17spi: imx: use proper dev_* functions for driver messagesSascha Hauer1-15/+12
Add a struct device * member to the private driver data and use it to print messages using dev_* functions rather than pr_*. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-17spi: imx: allow only WML aligned transfers to use DMAAnton Bondarenko1-15/+2
RX DMA tail data handling doesn't work correctly in many cases with current implementation. It happens because SPI core was setup to generates both RX and RX TAIL events. And RX TAIL event does not work correctly. This can be easily verified by sending SPI transaction with size modulus WML(32 in our case) not equal 0. Also removing change introduced in f6ee9b582d2db652497b73c1f117591dfb6d3a90 since this change only fix usecases with transfer size from 33 to 128 bytes and doesn't fix 129 bytes and bigger. This is output from transaction with len 138 bytes in loopback mode at 10Mhz: TX0000: a3 97 a2 55 53 be f1 fc f9 79 6b 52 14 13 e9 e2 TX0010: 2d 51 8e 1f 56 08 57 27 a7 05 d4 d0 52 82 77 75 TX0020: 1b 99 4a ed 58 3d 6a 52 36 d5 24 4a 68 8e ad 95 TX0030: 5f 3c 35 b5 c4 8c dd 6c 11 32 3d e2 b4 b4 59 cf TX0040: ce 23 3d 27 df a7 f9 96 fc 1e e0 66 2c 0e 7b 8c TX0050: ca 30 42 8f bc 9f 7b ce d1 b8 b1 87 ec 8a d6 bb TX0060: 2e 15 63 0e 3c dc a4 3a 7a 06 20 a7 93 1b 34 dd TX0070: 4c f5 ec 88 96 68 d6 68 a0 09 6f 8e 93 47 c9 41 TX0080: db ac cf 97 89 f3 51 05 79 71 RX0000: a3 97 a2 55 53 be f1 fc f9 79 6b 52 14 13 e9 e2 RX0010: 2d 51 8e 1f 56 08 57 27 a7 05 d4 d0 52 82 77 75 RX0020: 1b 99 4a ed 58 3d 6a 52 36 d5 24 4a 68 8e ad 95 RX0030: 5f 3c 35 00 00 b5 00 00 00 c4 00 00 8c 00 00 dd RX0040: 6c 11 32 3d e2 b4 b4 59 cf ce 23 3d 27 df a7 f9 RX0050: 96 fc 1e e0 66 2c 0e 7b 8c ca 30 42 8f 1f 1f bc RX0060: 9f 7b ce d1 b8 b1 87 ec 8a d6 bb 2e 15 63 0e ed RX0070: ed 3c 58 58 58 dc 3d 3d a4 6a 6a 3a 52 52 7a 36 RX0080: 06 20 a7 93 1b 34 dd 4c f5 ec Zeros at offset 33 and 34 caused by reading empty RX FIFO which not possible if DMA RX read was triggered by RX event. This mean DMA was triggered by RX TAIL event. Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-17spi: pl022: Remove obsolete struct pl022 members from kerneldocJarkko Nikula1-7/+0
These structure members were removed in 2012 by the commit ffbbdd21329f ("spi: create a message queueing infrastructure"). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-16spi: rockchip: remove xfer_completion from rockchip_spiShawn Lin1-2/+0
xfer_completion isn't been used anywhere, so it can be removed. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-18 08:35:12 +0000