summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-txx9.c
AgeCommit message (Collapse)AuthorFilesLines
2019-10-30spi: txx9: Convert to use GPIO descriptorsLinus Walleij1-17/+58
This converts the TXX9 SPI driver to use GPIO descriptors to control the GPIO chip selects. As the driver was clearly (ab)using the device tree "reg" property to offset into the global GPIO chip we have to add a hack to counter the hack: add a 1-to-1 chip select to GPIO offset mapping for all 16 lines on the TXX9 GPIO chip. The details are described in a largeish comment in the patch. We do not need to set up the GPIO as output any more since the core will take care of this, as well as it will handle the polarity inversion semantics. Cc: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191030073832.24038-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-15spi: use new `spi_transfer_delay_exec` helper where straightforwardAlexandru Ardelean1-2/+1
For many places in the spi drivers, using the new `spi_transfer_delay` helper is straightforward. It's just replacing: ``` if (t->delay_usecs) udelay(t->delay_usecs); ``` with `spi_transfer_delay(t)` which handles both `delay_usecs` and the new `delay` field. This change replaces in all places (in the spi drivers) where this change is simple. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20190926105147.7839-10-alexandru.ardelean@analog.com Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-18spi: spi-txx9: Add missing clock (un)prepare calls for CCFGeert Uytterhoeven1-3/+3
While the custom minimal TXx9 clock implementation doesn't need or use clock (un)prepare calls (they are dummies if !CONFIG_HAVE_CLK_PREPARE), they are mandatory when using the Common Clock Framework. Hence add them, to prepare for the advent of CCF. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-03spi: spi-txx9: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar1-9/+2
The workqueue "workqueue" has a single work item(&c->work) and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Work item has been flushed in txx9spi_remove() to ensure that nothing is pending while disconnecting the driver. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-16spi: txx9: Use transfer speed unconditionallyJarkko Nikula1-1/+1
SPI core validates the transfer speed and defaults to spi->max_speed_hz in case the transfer speed is not set. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-01spi/txx9: Deletion of an unnecessary check before the function call ↵Markus Elfring1-2/+1
"clk_disable" The clk_disable() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20spi: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-03spi: txx9: Fix checkpatch issueJingoo Han1-0/+2
Fix the following checkpatch warnings. Missing a blank line after declarations. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-04-10Merge remote-tracking branches 'spi/fix/complete', 'spi/fix/efm32', ↵Mark Brown1-1/+2
'spi/fix/omap2-mcspi' and 'spi/fix/qup' into spi-linus
2014-04-03spi: Always check complete callback before calling itAxel Lin1-1/+2
Since commit 1e25cd4729bd "spi: Do not require a completion", this checking is required to prevent NULL pointer dereference. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-01spi: txx9: Let spi core handle validating transfer lengthAxel Lin1-4/+0
spi core will handle validating transfer length since commit 4d94bd21b333 "spi: core: Validate length of the transfers in message". So remove the same checking in this driver. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-28spi: txx9: Use devm_ioremap_resource()Jingoo Han1-7/+2
Use devm_ioremap_resource() in order to make the code simpler, and remove redundant return value check of platform_get_resource() because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-10spi: txx9: Convert to let spi core handle checking transfer speedAxel Lin1-9/+3
By setting master->max_speed_hz and master->min_speed_hz, spi core will handle checking transfer speed. Then we can remove the same checking in this driver. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/qspi', ↵Mark Brown1-6/+2
'spi/topic/s3c24xx', 'spi/topic/s3c64xx', 'spi/topic/sh', 'spi/topic/tegra114', 'spi/topic/tegra20-sflash', 'spi/topic/tegra20-slink', 'spi/topic/txx9' and 'spi/topic/xcomm' into spi-linus
2013-12-20spi: txx9: drop clk_put for devm_clk_get in txx9spi_probe()Wei Yongjun1-1/+0
devm_clk_get() is used so there is no reason to explicitly call clk_put() in txx9spi_probe() functions. Fixes: 18e34d568efa ('spi: txx9: Use devm_clk_get()') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.og>
2013-12-17spi: txx9: Use devm_clk_get()Jingoo Han1-5/+2
Use devm_clk_get() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-15spi: txx9: fix reference leak to master in txx9spi_remove()Wei Yongjun1-1/+1
Once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory, otherwise we will leak a reference to master. Fix by removing the unnecessary spi_master_get() call. Fixes: 2fe7e4add3e5 ('spi: txx9: use devm_spi_register_master()') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-25Merge remote-tracking branch 'spi/topic/txx9' into spi-nextMark Brown1-2/+2
2013-10-25Merge remote-tracking branch 'spi/topic/probe' into spi-nextMark Brown1-1/+2
2013-10-15spi: txx9: Fix checkpatch issueJingoo Han1-2/+2
Fix the following checkpatch warnings. WARNING: space prohibited between function name and open parenthesis '(' Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-09spi: spi-txx9: replace platform_driver_probe to support deferred probingWolfram Sang1-1/+2
Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-26spi: txx9: use devm_spi_register_master()Jingoo Han1-3/+1
Use devm_spi_register_master() to make cleanup paths simpler, and remove a duplicate put. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30spi/txx9: Use linux/gpio.h not asm/gpio.hMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-26Merge remote-tracking branch 'spi/topic/txx9' into spi-nextMark Brown1-2/+0
2013-06-01spi: spi-txx9: Remove redundant platform_set_drvdata()Sachin Kamat1-2/+0
Setting platform data to NULL is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-29spi: convert drivers to use bits_per_word_maskStephen Warren1-7/+1
Fill in the recently added spi_master.bits_per_word_mask field in as many drivers as possible. Make related cleanups, such as removing any redundant error-checking, or empty setup callbacks. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-05spi: Remove erroneous __init, __exit and __exit_p() references in driversGrant Likely1-3/+3
Some of the spi driver module remove hooks were annotated with __exit and referenced with __exit_p(). Presumably these were supposed to be __devinit, __devexit and __devexit_p() since __init/__exit for a probe/remove hook has never been correct. They also got missed during the big __devinit/__devexit purge since they didn't match the pattern. Remove then now to be rid of it. v2: purge __init also Reported-by: Arnd Bergmann <arnd@arndb.de> [Arnd set a patch cleaning up one, and then I found more] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05spi: remove check for bits_per_word on transfer from low level driverLaxman Dewangan1-4/+2
The spi core make sure that each transfer structure have the proper setting for bits_per_word before calling low level transfer APIs. Hence it is no more require to check again in low level driver for this field whether this is set correct or not. Removing such code from low level driver. The txx9 change also removes a test for bits_per_word set to 0, and forcing it to 8 in that case. This can also be removed now since spi_setup() ensures spi->bits_per_word is not zero. if (!spi->bits_per_word) spi->bits_per_word = 8; Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31spi: Add module.h to implicit users in drivers/spiPaul Gortmaker1-0/+1
We are clipping down the presence of module.h, since it was everywhere. If you really need it, you better call it out, as per this changeset. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-06spi: reorganize driversGrant Likely1-0/+472
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>