summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-mxic.c
AgeCommit message (Collapse)AuthorFilesLines
2022-04-04spi: mxic: Fix an error handling path in mxic_spi_probe()Christophe JAILLET1-0/+1
If spi_register_master() fails, we must undo a previous mxic_spi_mem_ecc_probe() call, as already done in the remove function. Fixes: 00360ebae483 ("spi: mxic: Add support for pipelined ECC operations") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/09c81f751241f6ec0bac7a48d4ec814a742e0d17.1648980664.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10spi: mxic: Add support for pipelined ECC operationsMiquel Raynal1-2/+111
Some SPI-NAND chips do not have a proper on-die ECC engine providing error correction/detection. This is particularly an issue on embedded devices with limited resources because all the computations must happen in software, unless an external hardware engine is provided. These external engines are new and can be of two categories: external or pipelined. Macronix is providing both, the former being already supported. The second, however, is very SoC implementation dependent and must be instantiated by the SPI host controller directly. An entire subsystem has been contributed to support these engines which makes the insertion into another subsystem such as SPI quite straightforward without the need for a lot of specific functions. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/linux-mtd/20220202144536.393792-1-miquel.raynal@bootlin.com
2022-02-10spi: mxic: Add support for direct mappingMiquel Raynal1-3/+109
Implement the ->dirmap_create() and ->dirmap_read/write() hooks to provide a fast path for read and write accesses. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Zhengxun Li <zhengxunli@mxic.com.tw> Reviewed-by: Zhengxun Li <zhengxunli@mxic.com.tw> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/linux-mtd/20220127091808.1043392-13-miquel.raynal@bootlin.com
2022-02-10spi: mxic: Create a helper to ease the start of an operationMiquel Raynal1-24/+29
Create the mxic_spi_mem_prep_op_cfg() helper to provide the content to write to the register controlling the next IO command. This helper will soon be used by the dirmap implementation and having this code factorized out earlier will clarify this addition. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/linux-mtd/20220127091808.1043392-12-miquel.raynal@bootlin.com
2022-02-10spi: mxic: Create a helper to configure the controller before an operationMiquel Raynal1-12/+19
Create the mxic_spi_set_hc_cfg() helper to configure the HC_CFG register. This helper will soon be used by the dirmap implementation and having this code factorized out earlier will clarify this addition. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/linux-mtd/20220127091808.1043392-11-miquel.raynal@bootlin.com
2022-02-10spi: mxic: Fix the transmit pathMiquel Raynal1-16/+12
By working with external hardware ECC engines, we figured out that Under certain circumstances, it is needed for the SPI controller to check INT_TX_EMPTY and INT_RX_NOT_EMPTY in both receive and transmit path (not only in the receive path). The delay penalty being negligible, move this code in the common path. Fixes: b942d80b0a39 ("spi: Add MXIC controller driver") Cc: stable@vger.kernel.org Suggested-by: Mason Yang <masonccyang@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Zhengxun Li <zhengxunli@mxic.com.tw> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/linux-mtd/20220127091808.1043392-10-miquel.raynal@bootlin.com
2022-02-10spi: spi-mem: Kill the spi_mem_dtr_supports_op() helperMiquel Raynal1-9/+1
Now that spi_mem_default_supports_op() has access to the static controller capabilities (relating to memory operations), and now that these capabilities have been filled by the relevant controllers, there is no need for a specific helper checking only DTR operations, so let's just kill spi_mem_dtr_supports_op() and simply use spi_mem_default_supports_op() instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/linux-mtd/20220127091808.1043392-6-miquel.raynal@bootlin.com
2022-02-10spi: mxic: Provide a capability structureMiquel Raynal1-0/+5
This controller has DTR support, so advertize it with a capability now that the spi-controller structure contains this new field. This will later be used by the core to discriminate whether an operation is supported or not, in a more generic way than having different helpers. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/linux-mtd/20220127091808.1043392-5-miquel.raynal@bootlin.com
2021-08-12spi: mxic: add missing bracesYang Yingliang1-1/+2
Fix the following waring: drivers/spi/spi-mxic.c: In function ‘mxic_spi_mem_exec_op’: drivers/spi/spi-mxic.c:401:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation] if (op->data.dir == SPI_MEM_DATA_IN) ^~ drivers/spi/spi-mxic.c:403:4: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’ if (op->data.dtr) ^~ Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Zhengxun Li <zhengxunli@mxic.com.tw> Link: https://lore.kernel.org/r/20210810142405.2221540-1-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-09spi: mxic: patch for octal DTR mode supportZhengxun Li1-11/+30
Driver patch for octal DTR mode support. Owing to the spi_mem_default_supports_op() is not support dtr operation. Based on commit <539cf68cd51b> (spi: spi-mem: add spi_mem_dtr_supports_op()) add spi_mem_dtr_supports_op() to support dtr and keep checking the buswidth and command bytes. Signed-off-by: Zhengxun Li <zhengxunli@mxic.com.tw> Link: https://lore.kernel.org/r/1628054827-458-1-git-send-email-zhengxunli@mxic.com.tw Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-07spi: mxic: Don't leak SPI master in probe error pathLukas Wunner1-8/+2
If the calls to devm_clk_get() or devm_ioremap_resource() fail on probe of the Macronix SPI driver, the spi_master struct is erroneously not freed. Fix by switching over to the new devm_spi_alloc_master() helper. Fixes: b942d80b0a39 ("spi: Add MXIC controller driver") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: <stable@vger.kernel.org> # v5.0+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation Cc: <stable@vger.kernel.org> # v5.0+ Cc: Mason Yang <masonccyang@mxic.com.tw> Link: https://lore.kernel.org/r/4fa6857806e7e75741c05d057ac9df3564460114.1607286887.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-14spi: spi-mem: allow specifying a command's extensionPratyush Yadav1-1/+2
In xSPI mode, flashes expect 2-byte opcodes. The second byte is called the "command extension". There can be 3 types of extensions in xSPI: repeat, invert, and hex. When the extension type is "repeat", the same opcode is sent twice. When it is "invert", the second byte is the inverse of the opcode. When it is "hex" an additional opcode byte based is sent with the command whose value can be anything. So, make opcode a 16-bit value and add a 'nbytes', similar to how multiple address widths are handled. Some places use sizeof(op->cmd.opcode). Replace them with op->cmd.nbytes The spi-mxic and spi-zynq-qspi drivers directly use op->cmd.opcode as a buffer. Now that opcode is a 2-byte field, this can result in different behaviour depending on if the machine is little endian or big endian. Extract the opcode in a local 1-byte variable and use that as the buffer instead. Both these drivers would reject multi-byte opcodes in their supports_op() hook anyway, so we only need to worry about single-byte opcodes for now. The above two changes are put in this commit to keep the series bisectable. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200623183030.26591-3-p.yadav@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-08Merge branch 'for-5.4' of ↵Mark Brown1-3/+3
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.5
2019-10-01spi: mxic: Ensure width is respected in spi-mem operationsMiquel Raynal1-1/+1
Make use of a core helper to ensure the desired width is respected when calling spi-mem operators. Suggested-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20190919202504.9619-2-miquel.raynal@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-20spi: mxic: Fix DMAS_CTRL register layoutMiquel Raynal1-2/+2
Fix the current layout which only matches early non-public revisions of the IP. Since its official distribution, two bytes of the SPI controller DMAS_CTRL register have been inverted. Suggested-by: Mason Yang <masonccyang@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20190919202504.9619-4-miquel.raynal@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-20spi: mxic: Select SPI_NOR type by defaultMiquel Raynal1-1/+1
The SPI_NAND bit is a (wrongly named) placeholder that is intended to be used in the future. Right now SPI_NOR (which is currently identical to SPI_NAND in this version of the IP) should be used in both cases. Suggested-by: Mason Yang <masonccyang@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20190919202504.9619-3-miquel.raynal@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-20spi: mxic: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-05spi: Add MXIC controller driverMason Yang1-0/+619
Add a driver for Macronix SPI controller IP. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 18:10:51 +0000