summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-gpio.c
AgeCommit message (Collapse)AuthorFilesLines
2022-12-08spi: spi-gpio: Don't set MOSI as an input if not 3WIRE modeKris Bahnsen1-3/+13
The addition of 3WIRE support would affect MOSI direction even when still in standard (4 wire) mode. This can lead to MOSI being at an invalid logic level when a device driver sets an SPI message with a NULL tx_buf. spi.h states that if tx_buf is NULL then "zeros will be shifted out ... " If MOSI is tristated then the data shifted out is subject to pull resistors, keepers, or in the absence of those, noise. This issue came to light when using spi-gpio connected to an ADS7843 touchscreen controller. MOSI pulled high when clocking MISO data in caused the SPI device to interpret this as a command which would put the device in an unexpected and non-functional state. Fixes: 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support") Fixes: 5132b3d28371 ("spi: gpio: Support 3WIRE high-impedance turn-around") Signed-off-by: Kris Bahnsen <kris@embeddedTS.com> Link: https://lore.kernel.org/r/20221207230853.6174-1-kris@embeddedTS.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-22spi: gpio: Implement LSB First bitbang supportAndreas Färber1-9/+33
Add support for slave DT property spi-lsb-first, i.e., SPI_LSB_FIRST mode. Duplicate the inline helpers bitbang_txrx_be_cpha{0,1} as LE versions. Conditionally call them from all the spi-gpio txrx_word callbacks. Some alternatives to this implementation approach were discussed back then [0], but eventually it was considered reasonable. [0] https://lore.kernel.org/linux-arm-kernel/20191212033952.5967-8-afaerber@suse.de/ Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/feac3377-4ad1-77d8-9a18-3588d80fb909@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-07spi: gpio: Don't leak SPI master in probe error pathLukas Wunner1-13/+2
If the call to devm_spi_register_master() fails on probe of the GPIO SPI driver, the spi_master struct is erroneously not freed: After allocating the spi_master, its reference count is 1. The driver unconditionally decrements the reference count on unbind using a devm action. Before calling devm_spi_register_master(), the driver unconditionally increments the reference count because on success, that function will decrement the reference count on unbind. However on failure, devm_spi_register_master() does *not* decrement the reference count, so the spi_master is leaked. The issue was introduced by commits 8b797490b4db ("spi: gpio: Make sure spi_master_put() is called in every error path") and 79567c1a321e ("spi: gpio: Use devm_spi_register_master()"), which sought to plug leaks introduced by 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors") but missed this remaining leak. The situation was later aggravated by commit d3b0ffa1d75d ("spi: gpio: prevent memory leak in spi_gpio_probe"), which introduced a use-after-free because it releases a reference on the spi_master if devm_add_action_or_reset() fails even though the function already does that. Fix by switching over to the new devm_spi_alloc_master() helper. Fixes: 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors") Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@vger.kernel.org> # v4.17+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation Cc: <stable@vger.kernel.org> # v5.1-: 8b797490b4db: spi: gpio: Make sure spi_master_put() is called in every error path Cc: <stable@vger.kernel.org> # v5.1-: 45beec351998: spi: bitbang: Introduce spi_bitbang_init() Cc: <stable@vger.kernel.org> # v5.1-: 79567c1a321e: spi: gpio: Use devm_spi_register_master() Cc: <stable@vger.kernel.org> # v5.4-: d3b0ffa1d75d: spi: gpio: prevent memory leak in spi_gpio_probe Cc: <stable@vger.kernel.org> # v4.17+ Cc: Navid Emamdoost <navid.emamdoost@gmail.com> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Link: https://lore.kernel.org/r/86eaed27431c3d709e3748eb76ceecbfc790dd37.1607286887.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-08Merge branch 'for-5.4' of ↵Mark Brown1-1/+3
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.5
2019-10-07spi: gpio: Look for a device node instead of matchStephen Boyd1-4/+1
This driver doesn't do anything with the match for the device node. The logic is the same as looking to see if a device node exists or not because this driver wouldn't probe unless there is a device node match when the device is created from DT. Just test for the presence of the device node to simplify and avoid referencing a potentially undefined match table when CONFIG_OF=n. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Mark Brown <broonie@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: <linux-spi@vger.kernel.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191004214334.149976-9-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01spi: gpio: prevent memory leak in spi_gpio_probeNavid Emamdoost1-1/+3
In spi_gpio_probe an SPI master is allocated via spi_alloc_master, but this controller should be released if devm_add_action_or_reset fails, otherwise memory leaks. In order to avoid leak spi_contriller_put must be called in case of failure for devm_add_action_or_reset. Fixes: 8b797490b4db ("spi: gpio: Make sure spi_master_put() is called in every error path") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20190930205241.5483-1-navid.emamdoost@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-09spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request()Markus Elfring1-4/+1
Simplify this function implementation by using a known function. Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/b2dd074a-1693-3aea-42b4-da1f5ec155c4@web.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-17spi: gpio: Add SPI_MASTER_GPIO_SS flagLinus Walleij1-0/+6
The GPIO SPI master has some code in its local CS callback to set the initial sck GPIO value. This was lost in the commit converting it to use SPI core GPIO handling as this callback isn't called if the internal GPIO handling is active. Add the special SPI_MASTER_GPIO_SS to ascertain it gets called anyway so we get the initial SCK setting right. There is some platform provided GPIO handling there as well but this will be skipped as the cs_gpios will be NULL. My test targets seem not to care about the initial SCK value so I am uncertain if this is a regression, but to preserve the previous semantic we better do this. Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Fixes: 249e2632dcd0 ("spi: gpio: Don't request CS GPIO in DT use-case") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190716204651.7743-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-10/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-08spi: gpio: Use devm_spi_register_master()Andrey Smirnov1-15/+4
Replace spi_bitbang_start() with a combination of spi_bitbang_init() and devm_spi_register_master() and drop all of the explicit cleanup-related code that's no longer necessary. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-08spi: gpio: Make sure spi_master_put() is called in every error pathAndrey Smirnov1-7/+10
There's a number of failure paths in spi_gpio_probe() that do not call spi_master_put() potentially leaking memory. Fix this problem by registering a cleanup funciont via devm_add_action_or_reset() right after SPI controller is allocated. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05spi: gpio: Drop unused pdev field in struct spi_gpioAndrey Smirnov1-3/+0
There's no code using 'pdev' field in struct spi_gpio. Drop it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05spi: gpio: Drop mflags argument from spi_gpio_request()Andrey Smirnov1-15/+13
The logic of setting mflags in spi_gpio_request() is very simple and there isn't much benefit in having it in that function. Move all of that code outside into spi_gpio_probe() in order to simplify things. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05spi: gpio: Don't request CS GPIO in DT use-caseAndrey Smirnov1-75/+59
DT use-case already relies on SPI core to control CS (requested by of_spi_register_master() and controlled spi_set_cs()), so there's no need to try to request those GPIO in spi-gpio code. Change the code such that spi-gpio's CS related code is only used if device is probed via pdata. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-05Merge branch 'spi-5.1' into spi-5.2Mark Brown1-1/+0
2019-04-04spi: spi-gpio: Remove spi->controller_data commentGeert Uytterhoeven1-1/+0
The conversion from GPIO numbers to GPIO descriptors removed the use of spi->controller_data, but forgot to update a comment referring to it. Fixes: 9b00bc7b901ff672 ("spi: spi-gpio: Rewrite to use GPIO descriptors") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-03spi: gpio: Drop unused pdata copy in struct spi_gpioAndrey Smirnov1-3/+0
Drop unused pdata copy in struct spi_gpio. No functional change intended. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-03spi: gpio: Simplify SPI_MASTER_NO_TX check in spi_gpio_probe()Andrey Smirnov1-6/+6
Swap branches of the if statement in order to simplify it's logical condition being checked. No functional change intended. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-03spi: gpio: Add local struct spi_bitbang pointer in spi_gpio_probe()Andrey Smirnov1-13/+14
Use a local "struct spi_bitbang *bb" in spi_gpio_probe() for brevity. No functional change intended. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-03spi: gpio: Add local struct device pointer in spi_gpio_probe()Andrey Smirnov1-5/+6
Use a local "struct device *dev" in spi_gpio_probe() for brevity. No functional change intended. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-03spi: gpio: Drop unused spi_to_pdata()Andrey Smirnov1-6/+0
Spi_to_pdata() is not used anywhere in the code. Drop it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-spi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-21spi: spi-gpio: fix SPI_CS_HIGH capabilityRussell King1-2/+2
spi-gpio is capable of dealing with active-high chip-selects. Unfortunately, commit 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support") broke this by setting master->mode_bits, which overrides the setting in the spi-bitbang code. Fix this. [Fixed a trivial conflict with SPI_3WIRE_HIZ support -- broonie] Fixes: 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-02-12spi: gpio: Advertise support for SPI_CS_HIGHJonathan Neuschäfer1-1/+2
The spi-gpio driver already handles different chip select polarities, but so far this was not advertised in master->mode_bits. This patch fixes mmc_spi on top of spi_gpio, which is useful in some testing scenarios. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-07spi: gpio: Support 3WIRE high-impedance turn-aroundLinus Walleij1-3/+21
Some devices such as the TPO TPG110 display panel require a "high-impedance turn-around", in effect a clock cycle after switching the line from output to input mode. Support this in the GPIO driver to begin with. Other driver may implement it if they can, it is unclear if this can be achieved with anything else than GPIO bit-banging. Cc: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-21Merge branch 'spi-4.20' into spi-nextMark Brown1-6/+6
2018-09-10spi: gpio: No MISO does not imply no RXLinus Walleij1-4/+6
There is a logical problem in spi-gpio with host just assigning a MOSI line and no MISO: this is interpreted as the host cannot do RX and the host is flagged with SPI_MASTER_NO_RX. This is wrong: since GPIO lines can switch direction, in 3WIRE operation the host will simply reverse the direction of the GPIO line and start reading from it, there is even code for doing this in the driver, but it went unnoticed because it was tested by using a master with 4 wires but a device using just 3 wires. Remove the offending flag. Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-06spi: spi-gpio: Remove set but not used variable 'pdata'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/spi/spi-gpio.c: In function 'spi_gpio_remove': drivers/spi/spi-gpio.c:450:33: warning: variable 'pdata' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-04spi: gpio: Fix copy-and-paste errorLinus Walleij1-2/+2
This fixes an embarrassing copy-and-paste error in the errorpath of spi_gpio_request(): we were checking the wrong struct member for error code right after retrieveing the sck GPIO. Fixes: 9b00bc7b901ff672 ("spi: spi-gpio: Rewrite to use GPIO descriptors") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-01spi: spi-gpio: add SPI_3WIRE supportLorenzo Bianconi1-1/+16
Add SPI_3WIRE support to spi-gpio controller introducing set_line_direction function pointer in spi_bitbang data structure. Spi-gpio controller has been tested using hts221 temp/rh iio sensor running in 3wire mode and lsm6dsm running in 4wire mode Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-01spi: add flags parameter to txrx_word function pointersLorenzo Bianconi1-16/+16
Add the capability to specify the flag parameter used in bitbang_txrx_be_cpha{0,1} through the txrx_word function pointers of spi_bitbang data structure. That feature will be used to add spi-3wire support to the spi-gpio controller Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-2/+3
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-02-14spi: spi-gpio: Rewrite to use GPIO descriptorsLinus Walleij1-178/+92
This converts the bit-banged GPIO SPI driver to looking up and using GPIO descriptors to get a handle on GPIO lines for SCK, MOSI, MISO and all CS lines. All existing board files are converted in one go to keep it all consistent. With these conversions I rarely find any interrim steps that makes any sense. Device tree probing and GPIO handling should work like before also after this patch. For board files, we stop using controller data to pass the GPIO line for chip select, instead we pass this as a GPIO descriptor lookup like everything else. In some s3c24xx machines the names of the SPI devices were set to "spi-gpio" rather than "spi_gpio" which can never have worked, I fixed it working (I guess) as part of this patch set. Sometimes I wonder how this code got upstream in the first place, it obviously is not tested. mach-s3c64xx/mach-smartq.c has the same problem and additionally defines the *same* GPIO line for MOSI and MISO which is not going to be accepted by gpiolib. As the lines were number 1,2,2 I assumed it was a typo and use lines 1,2,3. A comment gives awat that line 0 is chip select though no actual SPI device is provided for the LCD supposed to be on this bit-banged SPI bus. I left it intact instead of just deleting the bus though. Kill off board file code that try to initialize the SPI lines to the same values that they will later be set by the spi_gpio driver anyways. Given the huge number of weird things in these board files I do not think this code is very tested or put in with much afterthought anyways. In order to assert that we do not get performance regressions on this crucial bing-banged driver, a ran a script like this dumping the Ilitek ILI9322 regmap 10000 times (it has no caching obviously) on an otherwise idle system in two iterations before and after the patches: #!/bin/sh for run in `seq 10000` do cat /debug/regmap/spi0.0/registers > /dev/null done Before the patch: time test.sh real 3m 41.03s user 0m 29.41s sys 3m 7.22s time test.sh real 3m 44.24s user 0m 32.31s sys 3m 7.60s After the patch: time test.sh real 3m 41.32s user 0m 28.92s sys 3m 8.08s time test.sh real 3m 39.92s user 0m 30.20s sys 3m 5.56s So any performance differences seems to be in the error margin. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-08Merge remote-tracking branches 'spi/topic/falcon', 'spi/topic/fsf', ↵Mark Brown1-6/+2
'spi/topic/fsl', 'spi/topic/fsl-dspi' and 'spi/topic/gpio' into spi-next
2015-01-05spi/gpio: fixed space coding style issueNizam Haider1-2/+2
fixed a coding style issue Signed-off-by: Nizam Haider <nizamhaider786@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22spi: Remove FSF mailing addressesJarkko Nikula1-4/+0
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-08spi: spi-gpio: Fix compiler warning when building for 64 bit systemsTorsten Fleischer1-9/+15
The assignment of SPI_GPIO_NO_CHIPSELECT to cs_gpios[0] causes the following compiler warning, when building for 64 bit systems: "warning: overflow in implicit constant conversion [-Woverflow]". This is because the SPI_GPIO_NO_CHIPSELECT flag is a '-1' type casted to unsigned long and cs_gpios is of the type int. Furthermore the chip select's GPIO number is locally stored as unsigned int and compared with SPI_GPIO_NO_CHIPSELECT. Thus the result of the comparison is always false, if unsigned long and unsigned int have a different size. As part of the fix this patch adds a check for the device tree's cs-gpios property. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Torsten Fleischer <torfl6749@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-04spi: spi-gpio: Add dt support for a single device with no chip selectTorsten Fleischer1-6/+15
In order to describe a single slave device that has no chip select line the 'num-chipselects' property has to be <0> and the 'cs-gpios' property doesn't need to be set. Signed-off-by: Torsten Fleischer <torfl6749@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20spi: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-07spi: spi-gpio: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-30Merge remote-tracking branches 'spi/topic/imx', 'spi/topic/init', ↵Mark Brown1-1/+0
'spi/topic/mpc512x-psc', 'spi/topic/mpc52xx', 'spi/topic/mxs', 'spi/topic/nuc900', 'spi/topic/oc-tiny' and 'spi/topic/octeon' into spi-next
2014-03-30Merge remote-tracking branches 'spi/topic/drivers', 'spi/topic/dw', ↵Mark Brown1-1/+1
'spi/topic/efm32', 'spi/topic/ep93xx', 'spi/topic/fsl', 'spi/topic/fsl-dspi', 'spi/topic/fsl-espi' and 'spi/topic/gpio' into spi-next
2014-03-29spi: bitbang: Make spi_bitbang_stop() return voidAxel Lin1-3/+2
spi_bitbang_stop() never fails, so make it return void. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-04spi: fix pointer-integer size mismatch warningSeongJae Park1-1/+1
Fix the pointer-integer size mismatch warning below: drivers/spi/spi-gpio.c: In function ‘spi_gpio_setup’: drivers/spi/spi-gpio.c:252:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] cs = (unsigned int) spi->controller_data; ^ Signed-off-by: SeongJae Park <sj38.park@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03spi: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-24spi: spi-gpio: Use 'cansleep' variants to access GPIOEzequiel Garcia1-4/+4
The GPIO chip in use could be of any kind, and therefore might sleep when accesing the GPIO lines. Take account of this by using cansleep instead, which is the most generic case. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-25Merge remote-tracking branch 'spi/topic/gpio' into spi-nextMark Brown1-0/+1
2013-10-16spi: gpio: Include linux/of.h headerSachin Kamat1-0/+1
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17spi: bitbang: Let spi_bitbang_start() take a reference to masterAxel Lin1-3/+2
Many drivers that use bitbang library have a leak on probe error paths. This is because once a spi_master_get() call succeeds, we need an additional spi_master_put() call to free the memory. Fix this issue by moving the code taking a reference to master to spi_bitbang_start(), so spi_bitbang_start() will take a reference to master on success. With this change, the caller is responsible for calling spi_bitbang_stop() to decrement the reference and spi_master_put() as counterpart of spi_alloc_master() to prevent a memory leak. So now we have below patten for drivers using bitbang library: probe: spi_alloc_master -> Init reference count to 1 spi_bitbang_start -> Increment reference count remove: spi_bitbang_stop -> Decrement reference count spi_master_put -> Decrement reference count (reference count reaches 0) Fixup all users accordingly. Signed-off-by: Axel Lin <axel.lin@ingics.com> Suggested-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Acked-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29spi: use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 10:49:23 +0000