summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-atmel.c
AgeCommit message (Collapse)AuthorFilesLines
2018-03-28spi: spi-atmel: Use correct enum for DMA transfer directionStefan Agner1-4/+4
Use enum dma_transfer_direction as required by the functions dmaengine_prep_slave_(sg|single)() instead of enum dma_data_direction. This won't change behavior in practice as the enum values are equivalent. This fixes two warnings when building with clang: drivers/spi/spi-atmel.c:771:12: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] DMA_FROM_DEVICE, ^~~~~~~~~~~~~~~ ... Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-27spi: atmel: init FIFOs before spi enableEugen Hristev1-3/+5
The datasheet recommends initializing FIFOs before SPI enable. If we do not do it like this, there may be a strange behavior. We noticed that DMA does not work properly with FIFOs if we do not clear them beforehand or enable them before SPIEN. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-01-05spi: atmel: Implements transfers with bounce bufferRadu Pirea1-29/+84
This patch enables SPI DMA transfers for Atmel SAM9 SoCs and implements a bounce buffer for transfers which have vmalloc allocated buffers. Those buffers are not cache coherent even if they have been transformed into sg lists. UBIFS is affected by this cache coherency issue. In this patch I also reverted "spi: atmel: fix corrupted data issue on SAM9 family SoCs"(7094576ccdc3acfe1e06a1e2ab547add375baf7f). Signed-off-by: Radu Pirea <radu.pirea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-19spi: atmel: fixed spin_lock usage inside atmel_spi_removeRadu Pirea1-1/+1
The only part of atmel_spi_remove which needs to be atomic is hardware reset. atmel_spi_stop_dma calls dma_terminate_all and this needs interrupts enabled. atmel_spi_release_dma calls dma_release_channel and dma_release_channel locks a mutex inside of spin_lock. So the call of these functions can't be inside a spin_lock. Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Radu Pirea <radu.pirea@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-03Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/bcm63xx', ↵Mark Brown1-3/+3
'spi/topic/davinci' and 'spi/topic/imx' into spi-next
2017-06-23spi: atmel: fix corrupted data issue on SAM9 family SoCsCyrille Pitchen1-1/+23
This patch disables the use of the DMA for data transfer and forces the use of PIO transfers instead as a quick fixup to solve the cache aliasing issue on ARM9 based cores, which embeds a VIVT data cache. Indeed in the case of VIVT data caches, it is not safe to call dma_map_*() functions to map buffers for DMA transfers when those buffers have been allocated by vmalloc() or from any DMA-unsafe area. Further patches may propose a better solution based on the use of a bounce buffer at the SPI sub-system level but such solution needs more time to be discussed. Then the use of DMA transfers could be enabled again to improve the performances but before that, this patch already solves the issue. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2017-06-06spi: atmel: print version only after successful registrationBaruch Siach1-3/+3
Don't print the version at the beginning of atmel_spi_probe(). This avoids spamming the log whenever a deferred probe runs. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18spi: atmel: add deepest PM support to SAMA5D2Quentin Schulz1-0/+9
This adds deepest (Backup+Self-Refresh) PM support to the ATMEL SAMA5D2 SoC's SPI controller. When resuming from deepest state, it is required to restore MR register as the registers are lost since VDD core has been shut down when entering deepest state on the SAMA5D2. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-12spi: atmel: factorize reusable code for SPI controller initQuentin Schulz1-14/+21
The SPI controller configuration during the init can be reused, for the resume function for example. Let's move this configuration to a separate function. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-12Merge remote-tracking branches 'spi/topic/armada', 'spi/topic/ath79', ↵Mark Brown1-178/+106
'spi/topic/atmel' and 'spi/topic/axi' into spi-next
2016-11-25spi: atmel: remove the use of private channel fieldsNicolas Ferre1-43/+43
For DMA transfers, we now use the core DMA framework which provides channel fields in the spi_master structure. Remove the private channels from atmel_spi stucture which were located in a sub-structure. This last one (atmel_spi_dma) which is now empty is also removed. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: atmel: trivial: remove unused fields in DMA structureNicolas Ferre1-4/+0
The atmel_spi_dma structure was cluttered with unused fields relative to older DMA channel selection API. Remove them. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: atmel: Use SPI core DMA mapping frameworkCyrille Pitchen1-32/+25
Use the SPI core DMA mapping framework instead of our own in case of DMA support. PDC support is not converted to this framework. The driver is now able to transfer a complete sg list through DMA. This eventually fix an issue with vmalloc'ed DMA memory that is provided for example by UBI/UBIFS layers. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> [nicolas.ferre@atmel.com: restrict the use to non-PDC DMA] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: atmel: Use core SPI_MASTER_MUST_[RT]X handlingNicolas Ferre1-96/+35
We need both RX and TX data for each transfer in any case (PIO, PDC, DMA). So convert the driver to the core dummy buffer handling with the SPI_MASTER_MUST_RX/SPI_MASTER_MUST_TX infrastructure. This move changes the maximum PDC/DMA buffer handling to 65535 bytes instead of a single page and sets master->max_dma_len to this value. All dummy buffer management is removed from the driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-25spi: atmel: trivial: move info banner to latest probe actionNicolas Ferre1-4/+4
The info banner is here to tell that everything went well, so place it at the very end of the probe function. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-15spi: atmel: Fix scheduling while atomicBen Whitten1-1/+5
A call to clk_get_rate appears to be called in the context of an interrupt, cache the bus clock for the frequency calculations in transmission. This fixes a 'BUG: scheduling while atomic' and 'WARNING: CPU: 0 PID: 777 at kernel/sched/core.c:2960 atmel_spi_unlock' Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com> Signed-off-by: Steve deRosier <steve.derosier@lairdtech.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-14spi: atmel: fix indenting in atmel_spi_gpio_cs()Dan Carpenter1-9/+9
These lines were indented one extra tab. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-09spi: atmel: use managed resource for gpio chip selectNicolas Ferre1-11/+39
Use the managed gpio CS pin request so that we avoid having trouble in the cleanup code. In fact, if module was configured with DT, cleanup code released invalid pin. Since resource wasn't freed, module cannot be reinserted. This require to extract the gpio request call from the "setup" function and call it in the appropriate probe function. Reported-by: Alexander Morozov <linux@meltdown.ru> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-28spi: atmel: fix gpio chip-select in case of non-DT platformCyrille Pitchen1-0/+1
The non-DT platform that uses this driver (actually the AVR32) was taking a bad branch for determining if the IP would use gpio for CS. Adding the presence of DT as a condition fixes this issue. Fixes: 4820303480a1 ("spi: atmel: add support for the internal chip-select of the spi controller") Reported-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> [nicolas.ferre@atmel.com: extract from ml discussion] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-11-04Merge remote-tracking branches 'spi/topic/ath97', 'spi/topic/atmel', ↵Mark Brown1-15/+6
'spi/topic/au1550', 'spi/topic/bcm2835' and 'spi/topic/bcm2835aux' into spi-next
2015-11-04Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/imx', ↵Mark Brown1-1/+2
'spi/fix/omap2-mcspi', 'spi/fix/ti-qspi' and 'spi/fix/xilinx' into spi-linus
2015-10-23spi: atmel: Fix DMA-setup for transfers with more than 8 bits per wordDavid Mosberger-Tang1-1/+2
The DMA-slave configuration depends on the whether <= 8 or > 8 bits are transferred per word, so we need to call atmel_spi_dma_slave_config() with the correct value. Signed-off-by: David Mosberger <davidm@egauge.net> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-09-25spi: atmel: Remove needless bits_per_word and speed_hz testsJarkko Nikula1-15/+6
SPI core validates both bits_per_word and speed_hz transfer parameters and defaults to spi->bits_per_word and spi->max_speed_hz in case these per transfer parameters are not set. This makes possible to remove two if statements and remove one code block that is never executed. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-22Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/bcm2835', ↵Mark Brown1-0/+2
'spi/fix/doc', 'spi/fix/mediatek', 'spi/fix/meson', 'spi/fix/mtk' and 'spi/fix/pxa2xx' into spi-linus
2015-09-10spi: atmel: remove warning when !CONFIG_PM_SLEEPAlexandre Belloni1-0/+2
When CONFIG_PM is defined but not CONFIG_PM_SLEEP (this happens when CONFIG_SUSPEND is not defined), there is the following warning: drivers/spi/spi-atmel.c:1723:12: warning: ‘atmel_spi_suspend’ defined but not used [-Wunused-function] drivers/spi/spi-atmel.c:1741:12: warning: ‘atmel_spi_resume’ defined but not used [-Wunused-function] Enclose both atmel_spi_suspend and atmel_spi_resume in #ifdef CONFIG_PM_SLEEP/#endif to solve that. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-10spi: atmel: remove useless includeAlexandre Belloni1-1/+0
Definitions from linux/platform_data/atmel.h are not used, remove the include. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-16spi: atmel: add support to FIFOsCyrille Pitchen1-10/+245
The latest SPI controllers embedded inside sama5d2x SoCs come with FIFOs. When FIFOs are enabled, they can either work in SINGLE data mode or MULTIPLE data mode. The selected mode depends on the configuration of the SPI controller (see below). In SINGLE data mode (or legacy mode), for a single I/O access, only one data can be read from the Receive Data Register (RDR) or written into the Transmit Data Register (TDR). On the other hand, in MULTIPLE data mode, up to 4 data can be read from the RDR or up 2 data can be written into the TDR in a single 32bit I/O access. So programmers should take good care of the width of the I/O access to read/write the right number of data. The exact number of read/written data depends on both the I/O access width and the data width (from 8 up to 16 bits). To enable the FIFO feature a "atmel,fifo-size" property must be set to provide the maximum number of data (not bytes) the RX and TX FIFOs can store. Hence a 32 data FIFO can always store up to 32 data unrelated with the actual data width. When FIFOs are enabled, the RX one is forced to operate in SINGLE data mode because this driver configures the spi controller as a master. In master mode only, the Received Data Register has an additionnal Peripheral Chip Select field, which prevents us from reading more than a single data at each register access. Besides, the TX FIFO operates in MULTIPLE data mode. However, even when a 8bit data size is used, only two data by access could be written into the Transmit Data Register. Indeed the first data has to be written into the lowest 16 bits whereas the second data has to be written into the highest 16 bits of the TDR. When DMA transfers are used to send data, we don't rework the transmit buffer to cope with this hardware limitation: the additional copies required to prepare a new input buffer suited to both the DMA controller and the spi controller would waste all the benefit of the DMA transfer. Instead, the DMA controller is configured to write only one data at time into the TDR. In pio mode, two data are written in the TDR in a single access. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-09spi: atmel: add support for the internal chip-select of the spi controllerCyrille Pitchen1-9/+28
This patch relies on the CSAAT (Chip Select Active After Transfer) feature introduced by the version 2 of the spi controller. This new mode allows to use properly the internal chip-select output pin of the spi controller instead of using external gpios. Consequently, the "cs-gpios" device-tree property becomes optional. When the new CSAAT bit is set into the Chip Select Register, the internal chip-select output pin remains asserted till both the following conditions become true: - the LASTXFER bit is set into the Control Register (or the Transmit Data Register) - the Transmit Data Register and its shift register are empty. WARNING: if the LASTXFER bit is set into the Control Register then new data are written into the Transmit Data Register fast enough to keep its shifter not empty, the chip-select output pin remains asserted. Only when the shifter becomes empty, the chip-select output pin is unasserted. When the CSAAT bit is clear in the Chip Select Register, the LASTXFER bit is ignored in both the Control Register and the Transmit Data Register. The internal chip-select output pin remains active as long as the Transmit Data Register or its shift register are not empty. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-11Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/bcm2385', ↵Mark Brown1-1/+7
'spi/topic/bcm2835', 'spi/topic/bcm53xx' and 'spi/topic/bitbang' into spi-next
2015-03-22spi: atmel: use endian agnostic IOBen Dooks1-1/+7
Use the endian agnositc IO functions instead of the __raw ones for when the driver is in use on big-endian systems. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26spi: atmel: Fix interrupt setup for PDC transfersTorsten Fleischer1-6/+6
Additionally to the current DMA transfer the PDC allows to set up a next DMA transfer. This is useful for larger SPI transfers. The driver currently waits for ENDRX as end of the transfer. But ENDRX is set when the current DMA transfer is done (RCR = 0), i.e. it doesn't include the next DMA transfer. Thus a subsequent SPI transfer could be started although there is currently a transfer in progress. This can cause invalid accesses to the SPI slave devices and to SPI transfer errors. This issue has been observed on a hardware with a M25P128 SPI NOR flash. So instead of ENDRX we should wait for RXBUFF. This flag is set if there is no more DMA transfer in progress (RCR = RNCR = 0). Signed-off-by: Torsten Fleischer <torfl6749@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-02-04spi: atmel: cleanup wait_for_completion return handlingNicholas Mc Guire1-7/+5
return type of wait_for_completion_timeout is unsigned long not int, this patch adds an appropriate variable and fixes up the assignment. It removes the else branch as the only thing it was doing is assigning ret = 0; - but ret is never used thereafter so that is not needed. As the string in dev_err already states "timeout" there is little point in printing the 0. A typo in "trasfer" -> transfer is also fixed. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-24spi: atmel: introduce probe deferringLudovic Desroches1-4/+16
Return probe defer if requesting a dma channel without a dma controller probed. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24spi: atmel: remove compat for non DT board when requesting dma chanLudovic Desroches1-23/+2
All boards with a dma controller have DT support so using dma_request_slave_channel_compat is no more needed. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-21spi/atmel: improve the system suspend/resume functions implementationWenyou Yang1-35/+26
To make it cleaner, the system suspend/resume directly call the runtime suspend/resume functions and remove the wapper of CONFIG_PM_RUNTIME, CONFIG_PM_SLEEP. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Kevin Hilman <khilman@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20spi: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20spi/atmel: fix simple_return.cocci warningsFengguang Wu1-6/+1
drivers/spi/spi-atmel.c:1518:1-4: WARNING: end returns can be simpified and declaration on line 1514 can be dropped Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20spi/atmel: add support for runtime PMWenyou Yang1-7/+61
Drivers should put the device into low power states proactively whenever the device is not in use. Thus implement support for runtime PM and use the autosuspend feature to make sure that we can still perform well in case we see lots of SPI traffic within short period of time. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20spi/atmel: use dmaengine_terminate_all() APIVinod Koul1-4/+2
The drivers should use dmaengine_terminate_all() API instead of accessing the device_control which will be deprecated soon Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-08-01spi/atmel: Fix pointer to int conversion warnings on 64 bit buildsMark Brown1-2/+2
On 64 bit systems integers are generally still 32 bit but long values and pointers are usually 64 bit. GCC warns when casting a 64 bit pointer into a 32 bit integer so cast to a long instead in order to avoid warnings. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-16spi: atmel: Use dmaengine_prep_slave_sg() APIGeert Uytterhoeven1-12/+6
Use the inline wrapper introduced by commit 16052827d98fbc13c31ebad560af4bd53e2b4dd5 ("dmaengine/dma_slave: introduce inline wrappers"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-02Merge remote-tracking branches 'spi/topic/adi', 'spi/topic/atmel' and ↵Mark Brown1-3/+6
'spi/topic/cadence' into spi-next
2014-05-07spi: atmel: fix incorrect comparisonAlexandre Belloni1-2/+3
Found using smatch: drivers/spi/spi-atmel.c:878 atmel_spi_pump_pio_data() warn: unsigned 'as->current_remaining_bytes' is never less than zero. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-18spi: atmel: Fix scheduling while atomic bugAlexander Stein1-0/+3
atmel_spi_lock does a spin_lock_irqsave, so we need to renable the interrupts when we want to schedule. Signed-off-by: Alexander Stein <alexanders83@web.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14spi: atmel: Make current_remaining_bytes to be intAxel Lin1-1/+3
Don't use unsigned for current_remaining_bytes so we can check current_remaining_bytes < 0 case. Use int is enough for current_remaining_bytes. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-30Merge remote-tracking branches 'spi/topic/imx', 'spi/topic/init', ↵Mark Brown1-1/+0
'spi/topic/mpc512x-psc', 'spi/topic/mpc52xx', 'spi/topic/mxs', 'spi/topic/nuc900', 'spi/topic/oc-tiny' and 'spi/topic/octeon' into spi-next
2014-03-30Merge remote-tracking branches 'spi/topic/bus-num', 'spi/topic/cleanup', ↵Mark Brown1-7/+0
'spi/topic/clps711x', 'spi/topic/coldfire', 'spi/topic/completion' and 'spi/topic/davinci' into spi-next
2014-03-30Merge remote-tracking branches 'spi/topic/altera', 'spi/topic/atmel', ↵Mark Brown1-14/+12
'spi/topic/au1550', 'spi/topic/bcm63xx', 'spi/topic/bcm63xx-hsspi', 'spi/topic/bfin5xx', 'spi/topic/bitbang' and 'spi/topic/bpw' into spi-next
2014-03-21spi: atmel: fix printk format warningsRandy Dunlap1-3/+3
Fix printk format warning by using %p extension 'ad' for dma_addr_t. drivers/spi/spi-atmel.c:1228:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat] drivers/spi/spi-atmel.c:1228:3: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 11:39:05 +0000