summaryrefslogtreecommitdiffstats
path: root/drivers/spi/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-06-04spi: stm32-qspi: Fix W=1 build warningPatrice Chotard1-0/+1
Fix the following compilation warning using W=1 build: arm-linux-gnueabi-ld: drivers/spi/spi-stm32-qspi.o: in function `stm32_qspi_poll_status': Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210604075009.25914-1-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-28spi: altera: Make SPI_ALTERA_CORE invisibleGeert Uytterhoeven1-1/+1
The SPI_ALTERA_CORE config symbol controls compilation of the Altera SPI Controller core code. It is already selected by all of its users, so there is no reason to make it visible, unless compile-testing. Fixes: b0c3d9354de1f87e ("spi: altera: separate core code from platform code") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/f0cb8e66baba4506db6f42fca74dc51b76883507.1619534253.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20spi: altera: Add DFL bus driver for Altera API ControllerMatthew Gerlach1-0/+9
This patch adds a Device Feature List (DFL) bus driver for the Altera SPI Master controller. The SPI master is connected to an Intel SPI Slave to Avalon Bridge inside an Intel MAX10 BMC Chip. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Link: https://lore.kernel.org/r/20210416165720.554144-3-matthew.gerlach@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20spi: altera: separate core code from platform codeMatthew Gerlach1-1/+8
In preparation of adding support for a new bus type, separate the core spi-altera code from the platform driver code. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Link: https://lore.kernel.org/r/20210416165720.554144-2-matthew.gerlach@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-31spi: Add HiSilicon SPI Controller Driver for Kunpeng SoCsJay Fang1-0/+10
This driver supports SPI Controller for HiSilicon Kunpeng SoCs. This driver supports SPI operations using FIFO mode of transfer. DMA is not supported, and we just use IRQ mode for operation completion notification. Only ACPI firmware is supported. Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616836200-45827-1-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-22Merge tag 'spi-v5.12' of ↵Linus Torvalds1-22/+11
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The main focus of this release from a framework point of view has been spi-mem where we've acquired support for a few new hardware features which enable better performance on suitable hardware. Otherwise mostly thanks to Arnd's cleanup efforts on old platforms we've removed several obsolete drivers which just about balance out the newer drivers we've added this cycle. Summary: - Allow drivers to flag if they are unidirectional. - Support for DTR mode and hardware acceleration of dummy cycles in spi-mem. - Support for Allwinder H616, Intel Lightning Mountain, nVidia Tegra QuadSPI, Realtek RTL838x and RTL839x. - Removal of obsolete EFM32, Txx9 and SIRF Prima and Atlas drivers" * tag 'spi-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (76 commits) spi: Skip zero-length transfers in spi_transfer_one_message() spi: dw: Avoid stack content exposure spi: cadence-quadspi: Use spi_mem_dtr_supports_op() spi: spi-mem: add spi_mem_dtr_supports_op() spi: atmel-quadspi: Disable the QSPI IP at suspend() spi: pxa2xx: Add IDs for the controllers found on Intel Lynxpoint spi: pxa2xx: Fix the controller numbering for Wildcat Point spi: Change provied to provided in the file spi.h spi: mediatek: add set_cs_timing support spi: support CS timing for HW & SW mode spi: add power control when set_cs_timing spi: stm32: make spurious and overrun interrupts visible spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC spi: stm32: defer probe for reset spi: stm32: driver uses reset controller only at init spi: stm32h7: ensure message are smaller than max size spi: stm32: use bitfield macros spi: stm32: do not mandate cs_gpio spi: stm32: properly handle 0 byte transfer spi: clps711xx: remove redundant white-space ...
2021-01-21spi: remove sirf prima/atlas driverArnd Bergmann1-7/+0
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/r/20210120161658.3820610-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-20ARM: remove u300 platformArnd Bergmann1-1/+0
The Ericsson U300 platform was one of two ARM929 based SoC platforms for mobile phones in ST-Ericsson after the merger of Ericsson with ST-NXP into ST-Ericsson, the other one being the ST Nomadik. The platform was not widely adopted in Linux based systems and was replaced with the far superior ST-Ericsson U8500 in 2011, but Linus Walleij kept maintaining the code for the whole time. Linus continues to use the Nomadik machine, but decided to drop u300 from the kernel as part of this year's spring cleaning. Thanks for having maintained it all these years. Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/lkml/CACRpkdbJkiHR9FSfJTH_5d_qRU1__dRXHM1TL40iqNRKbGQfrQ@mail.gmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-15Merge series "Remove ARM platform efm32" from Uwe Kleine-König ↵Mark Brown1-7/+0
<u.kleine-koenig@pengutronix.de> Uwe Kleine-König <uwe.kleine-koenig@pengutronix.de>: From: Uwe Kleine-König <uwe.kleine-koenig@pengutronix.de> Hello, there are no known active users of the efm32 platform. Given that the only machine that is supported has only 4 MiB of RAM its use is also quite limited. Back then it served as the platform to develop ARMv7-M support in Linux which was quite fun and still is a blissful memory. Still given that the code serves no purpose and this probably won't change anytime soon, remove all platform support. I'm unsure what to do with the device tree bindings. Should we delete them, too? Best regards Uwe Uwe Kleine-König (7): ARM: drop efm32 platform clk: Drop unused efm32gg driver clocksource: Drop unused efm32 timer code spi: Drop unused efm32 bus driver i2c: Drop unused efm32 bus driver tty: Drop unused efm32 serial driver MAINTAINERS: Remove deleted platform efm32 MAINTAINERS | 7 - arch/arm/Kconfig | 10 +- arch/arm/Kconfig.debug | 17 - arch/arm/Makefile | 1 - arch/arm/boot/dts/Makefile | 2 - arch/arm/boot/dts/efm32gg-dk3750.dts | 88 --- arch/arm/boot/dts/efm32gg.dtsi | 177 ----- arch/arm/configs/efm32_defconfig | 98 --- arch/arm/include/debug/efm32.S | 45 -- arch/arm/mach-efm32/Makefile | 2 - arch/arm/mach-efm32/Makefile.boot | 4 - arch/arm/mach-efm32/dtmachine.c | 16 - arch/arm/mm/Kconfig | 1 - drivers/clk/Makefile | 1 - drivers/clk/clk-efm32gg.c | 84 --- drivers/clocksource/Kconfig | 9 - drivers/clocksource/Makefile | 1 - drivers/clocksource/timer-efm32.c | 278 -------- drivers/i2c/busses/Kconfig | 7 - drivers/i2c/busses/Makefile | 1 - drivers/i2c/busses/i2c-efm32.c | 469 ------------- drivers/spi/Kconfig | 7 - drivers/spi/Makefile | 1 - drivers/spi/spi-efm32.c | 462 ------------ drivers/tty/serial/Kconfig | 13 - drivers/tty/serial/Makefile | 1 - drivers/tty/serial/efm32-uart.c | 852 ----------------------- include/linux/platform_data/efm32-spi.h | 15 - include/linux/platform_data/efm32-uart.h | 19 - include/uapi/linux/serial_core.h | 3 - 30 files changed, 1 insertion(+), 2690 deletions(-) delete mode 100644 arch/arm/boot/dts/efm32gg-dk3750.dts delete mode 100644 arch/arm/boot/dts/efm32gg.dtsi delete mode 100644 arch/arm/configs/efm32_defconfig delete mode 100644 arch/arm/include/debug/efm32.S delete mode 100644 arch/arm/mach-efm32/Makefile delete mode 100644 arch/arm/mach-efm32/Makefile.boot delete mode 100644 arch/arm/mach-efm32/dtmachine.c delete mode 100644 drivers/clk/clk-efm32gg.c delete mode 100644 drivers/clocksource/timer-efm32.c delete mode 100644 drivers/i2c/busses/i2c-efm32.c delete mode 100644 drivers/spi/spi-efm32.c delete mode 100644 drivers/tty/serial/efm32-uart.c delete mode 100644 include/linux/platform_data/efm32-spi.h delete mode 100644 include/linux/platform_data/efm32-uart.h base-commit: 5c8fe583cce542aa0b84adc939ce85293de36e5e -- 2.29.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2021-01-15spi: Drop unused efm32 bus driverUwe Kleine-König1-7/+0
Support for this machine was just removed, so drop the now unused spi bus driver, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210114151630.128830-5-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-13spi: cadence-quadspi: Add QSPI support for Intel LGM SoCRamuthevar Vadivel Murugan1-1/+1
Add QSPI controller support for Intel LGM SoC. Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Link: https://lore.kernel.org/r/20201124041840.31066-2-vadivel.muruganx.ramuthevar@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-06spi: tegra210-quad: Add support for Tegra210 QSPI controllerSowjanya Komatineni1-0/+9
Tegra SoC has a Quad SPI controller starting from Tegra210. This patch adds support for Tegra210 QSPI controller. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1608585459-17250-5-git-send-email-skomatineni@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-05spi: txx9: Remove driverThomas Bogendoerfer1-6/+0
CPU support for TX49xx is getting removed, so remove support SPI driver for it. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: https://lore.kernel.org/r/20210105140305.141401-5-tsbogend@alpha.franken.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04spi: renesas rpc-if: Update Add RZ/G2 to Kconfig descriptionAdam Ford1-1/+1
The SPI driver for the Renesas RPC-IF is present on the RZ/G2 Series. Add that to the description. Suggested-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210102115412.3402059-3-aford173@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-27spi: dw-bt1: Fix undefined devm_mux_control_get symbolSerge Semin1-2/+2
I mistakenly added the select attributes to the SPI_DW_BT1_DIRMAP config instead of having them defined in SPI_DW_BT1. If the kernel doesn't have the MULTIPLEXER and MUX_MMIO configs manually enabled and the SPI_DW_BT1_DIRMAP config hasn't been selected, Baikal-T1 SPI device will always fail to be probed by the driver. Fix that and the error reported by the test robot: >> ld.lld: error: undefined symbol: devm_mux_control_get >>> referenced by spi-dw-bt1.c >>> spi/spi-dw-bt1.o:(dw_spi_bt1_sys_init) in archive drivers/built-in.a by moving the MULTIPLEXER/MUX_MMIO configs selection to the SPI_DW_BT1 config. Link: https://lore.kernel.org/lkml/202011161745.uYRlekse-lkp@intel.com/ Link: https://lore.kernel.org/linux-spi/20201116040721.8001-1-rdunlap@infradead.org/ Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201127144612.4204-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-1/+1
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-08spi: dw: Add Baikal-T1 SPI Controller glue driverSerge Semin1-0/+28
Baikal-T1 is equipped with three DW APB SSI-based MMIO SPI controllers. Two of them are pretty much normal: with IRQ, DMA, FIFOs of 64 words depth, 4x CSs, but the third one as being a part of the Baikal-T1 System Boot Controller has got a very limited resources: no IRQ, no DMA, only a single native chip-select and Tx/Rx FIFO with just 8 words depth available. In order to provide a transparent initial boot code execution the Boot SPI controller is also utilized by an vendor-specific IP-block, which exposes an SPI flash direct mapping interface. Since both direct mapping and SPI controller normal utilization are mutual exclusive only one of these interfaces can be used to access an external SPI slave device. That's why a dedicated mux is embedded into the System Boot Controller. All of that is taken into account in the Baikal-T1-specific DW APB SSI glue driver implemented by means of the DW SPI core module. Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201007235511.4935-22-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-08spi: dw: Add memory operations supportSerge Semin1-0/+1
Aside from the synchronous Tx-Rx mode, which has been utilized to create the normal SPI transfers in the framework of the DW SSI driver, DW SPI controller supports Tx-only and EEPROM-read modes. The former one just enables the controller to transmit all the data from the Tx FIFO ignoring anything retrieved from the MISO lane. The later mode is so called write-then-read operation: DW SPI controller first pushes out all the data from the Tx FIFO, after that it'll automatically receive as much data as has been specified by means of the CTRLR1 register. Both of those modes can be used to implement the memory operations supported by the SPI-memory subsystem. The memory operation implementation is pretty much straightforward, except a few peculiarities we have had to take into account to make things working. Since DW SPI controller doesn't provide a way to directly set and clear the native CS lane level, but instead automatically de-asserts it when a transfer going on, we have to make sure the Tx FIFO isn't empty during entire Tx procedure. In addition we also need to read data from the Rx FIFO as fast as possible to prevent it' overflow with automatically fetched incoming traffic. The denoted peculiarities get to cause even more problems if DW SSI controller is equipped with relatively small FIFO and is connected to a relatively slow system bus (APB) (with respect to the SPI bus speed). In order to workaround the problems for as much as it's possible, the memory operation execution procedure collects all the Tx data into a single buffer and disables the local IRQs to speed the write-then-optionally-read method up. Note the provided memory operations are utilized by default only if a glue driver hasn't provided a custom version of ones and this is not a DW APB SSI controller with fixed automatic CS toggle functionality. Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201007235511.4935-18-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-13Merge tag 'samsung-soc-s3c-5.10' of ↵Olof Johansson1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung S3C24xx and S3C64xx machine code cleanup for v5.10 Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it also touches files shared with S5Pv210 and Exynos. This is mostly Arnd Bergmann work which Krzysztof Kozlowski took over, rebased and polished. The goal is to cleanup, merge and finally make the Samsung S3C24xx and S3C64xx architectures multiplatform. The multiplatform did not happen yet here - just cleaning up and merging into one arch/arm/mach-s3c directory. However this is step forward for multiplatform or at least to keep this code still maintainable. This pulls also branch with changes for Samsung SoC sound drivers from broonie/sound because the cleanups there were part of this series and all further patches depend on them. * tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits) ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup ARM: s3c: Cleanup from old plat-samsung include ARM: s3c: make headers local if possible ARM: s3c: move into a common directory ARM: s3c24xx: stop including mach/hardware.h from mach/io.h cpufreq: s3c24xx: move low-level clk reg access into platform code cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh ARM: s3c: remove cpufreq header dependencies cpufreq: s3c24xx: split out registers fbdev: s3c2410fb: remove mach header dependency ARM: s3c24xx: bast: avoid irq_desc array usage ARM: s3c24xx: spi: avoid hardcoding fiq number in driver ARM: s3c24xx: include mach/irqs.h where needed ARM: s3c24xx: move s3cmci pinctrl handling into board files ARM: s3c24xx: move iis pinctrl config into boards ARM: s3c24xx: move spi fiq handler into platform ARM: s3c: adc: move header to linux/soc/samsung ARM: s3c24xx: move irqchip driver back into platform ARM: s3c24xx: move regs-spi.h into spi driver ARM: s3c64xx: remove mach/hardware.h ... Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-07spi: qup: Allow for compile-testing on !ARMAlex Dewar1-1/+1
There seems no reason to restrict testing to ARM, so remove this constraint to improve test coverage. Build-tested with allyesconfig on x86. Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Link: https://lore.kernel.org/r/20200904163709.110975-1-alex.dewar90@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-19ARM: s5pv210: don't imply CONFIG_PLAT_SAMSUNGArnd Bergmann1-1/+1
The plat-samsung directory and mach-s5pv210 can be build completely independently, so split the two Kconfig symbols CONFIG_PLAT_SAMSUNG and CONFIG_ARCH_S5PV210. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200806182059.2431-18-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-08-03spi: Prevent adding devices below an unregistering controllerLukas Wunner1-0/+3
CONFIG_OF_DYNAMIC and CONFIG_ACPI allow adding SPI devices at runtime using a DeviceTree overlay or DSDT patch. CONFIG_SPI_SLAVE allows the same via sysfs. But there are no precautions to prevent adding a device below a controller that's being removed. Such a device is unusable and may not even be able to unbind cleanly as it becomes inaccessible once the controller has been torn down. E.g. it is then impossible to quiesce the device's interrupt. of_spi_notify() and acpi_spi_notify() do hold a ref on the controller, but otherwise run lockless against spi_unregister_controller(). Fix by holding the spi_add_lock in spi_unregister_controller() and bailing out of spi_add_device() if the controller has been unregistered concurrently. Fixes: ce79d54ae447 ("spi/of: Add OF notifier handler") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v3.19+ Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Link: https://lore.kernel.org/r/a8c3205088a969dc8410eec1eba9aface60f36af.1596451035.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: lantiq: Add support to Lightning Mountain SoCDilip Kota1-2/+2
Add support to SPI controller on Intel Atom based Lightning Mountain SoC which reuses Lantiq SPI controller IP. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Link: https://lore.kernel.org/r/4d61a75381aca9479f9fc15d07a7b05534da6bb3.1594957019.git.eswara.kota@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: Fix SPI NOR and SPI NAND acronymsTudor Ambarus1-5/+5
The industry refers to these flash types as "SPI NOR" and "SPI NAND". Be consistent and use the same acronyms. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200716051144.568606-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: atmel-quadspi: Use optimezed memcpy_fromio()/memcpy_toio()Tudor Ambarus1-1/+1
Optimezed mem*io operations are defined for LE platforms, use them. The ARM and !ARCH_EBSA110 dependencies for COMPILE_TEST were added only for the _memcpy_fromio()/_memcpy_toio() functions. Drop these dependencies. Tested unaligned accesses on both sama5d2 and sam9x60 QSPI controllers using SPI NOR flashes, everything works ok. The following performance improvement can be seen when running mtd_speedtest: sama5d2_xplained (mx25l25635e) - before: mtd_speedtest: eraseblock write speed is 983 KiB/s mtd_speedtest: eraseblock read speed is 6150 KiB/s - after: mtd_speedtest: eraseblock write speed is 1055 KiB/s mtd_speedtest: eraseblock read speed is 20144 KiB/s sam9x60ek (sst26vf064b) - before: mtd_speedtest: eraseblock write speed is 4770 KiB/s mtd_speedtest: eraseblock read speed is 8062 KiB/s - after: mtd_speedtest: eraseblock write speed is 4524 KiB/s mtd_speedtest: eraseblock read speed is 21186 KiB/s Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200716043139.565734-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-19Merge series "mtd: spi-nor: Move cadence-qaudspi to spi-mem framework" from ↵Mark Brown1-0/+11
Vignesh Raghavendra <vigneshr@ti.com>: This series is a subset of "[PATCH v12 0/4] spi: cadence-quadspi: Add support for the Cadence QSPI controller" by Ramuthevar,Vadivel MuruganX <vadivel.muruganx.ramuthevar@linux.intel.com> that intended to move cadence-quadspi driver to spi-mem framework Those patches were trying to accomplish too many things in a single set of patches and need to split into smaller patches. This is reduced version of above series. Changes that are intended to make migration easy are split into separate patches. Patches 1 to 3 drop features that cannot be supported under spi-mem at the moment (backward compatibility is maintained). Patch 4-5 are trivial cleanups. Patch 6 does the actual conversion to spi-mem and patch 7 moves the driver to drivers/spi folder. I have tested both INDAC mode (used by non TI platforms like Altera SoCFPGA) and DAC mode (used by TI platforms) on TI EVMs. Patches to move move bindings over to "Documentation/devicetree/bindings/spi/" directory and also conversion of bindig doc to YAML will be posted separately. Support for Intel platform would follow that. Resend v3: Rebased onto v5.7-c1 v3: Split handling of probe deferral into separate patch (out of 5/6) Split dropping of redundant WREN to separate patch (out of 5/6) Fix a possible memleak due to lack of spi_master_put() Parse all SPI slave nodes in cqspi_setup_flash() Address misc comments from Tudor on v2 Rebase onto latest spi-nor/next v2: Rework patch 1/6 to keep "cdns,is-decoded-cs" property supported. Ramuthevar Vadivel Murugan (2): mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework spi: Move cadence-quadspi driver to drivers/spi/ Vignesh Raghavendra (6): mtd: spi-nor: cadence-quadspi: Make driver independent of flash geometry mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on failure mtd: spi-nor: cadence-quadspi: Fix error path on failure to acquire reset lines mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel mtd: spi-nor: cadence-quadspi: Drop redundant WREN in erase path drivers/mtd/spi-nor/controllers/Kconfig | 11 - drivers/mtd/spi-nor/controllers/Makefile | 1 - drivers/spi/Kconfig | 11 + drivers/spi/Makefile | 1 + .../spi-cadence-quadspi.c} | 541 +++++++----------- 5 files changed, 222 insertions(+), 343 deletions(-) rename drivers/{mtd/spi-nor/controllers/cadence-quadspi.c => spi/spi-cadence-quadspi.c} (74%) base-commit: b3a9e3b9622ae10064826dccb4f7a52bd88c7407 -- 2.26.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
2020-06-19spi: Move cadence-quadspi driver to drivers/spi/Ramuthevar Vadivel Murugan1-0/+11
Now that cadence-quadspi has been converted to use spi-mem framework, move it under drivers/spi/ Update license header to match SPI subsystem style Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200601070444.16923-9-vigneshr@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-19spi: altera: use regmap-mmio instead of direct mmio register accessXu Yilun1-0/+1
This patch adds support for regmap. It makes preparation for supporting different ways to access the registers. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/1592531021-11412-2-git-send-email-yilun.xu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16Merge series "spi: bcm63xx: add BMIPS support" from Álvaro Fernández Rojas ↵Mark Brown1-2/+2
<noltari@gmail.com>: BCM63xx SPI and HSSPI controller are present on several BMIPS SoCs (BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268). v2: use devm_reset_control_get_exclusive Álvaro Fernández Rojas (4): spi: bcm63xx-spi: add reset support spi: bcm63xx-spi: allow building for BMIPS spi: bcm63xx-hsspi: add reset support spi: bcm63xx-hsspi: allow building for BMIPS drivers/spi/Kconfig | 4 ++-- drivers/spi/spi-bcm63xx-hsspi.c | 17 +++++++++++++++++ drivers/spi/spi-bcm63xx.c | 17 +++++++++++++++++ 3 files changed, 36 insertions(+), 2 deletions(-) -- 2.27.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2020-06-16spi: add Renesas RPC-IF driverSergei Shtylyov1-0/+6
Add the SPI driver for the Renesas RPC-IF. It's the "front end" driver using the "back end" APIs in the main driver to talk to the real hardware. We only implement the 'spi-mem' interface -- there's no need to implement the usual SPI driver methods... Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Link: https://lore.kernel.org/r/1ece0e6c-71af-f0f1-709e-571f4b0b4853@cogentembedded.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16spi: bcm63xx-hsspi: allow building for BMIPSÁlvaro Fernández Rojas1-1/+1
bcm63xx-hsspi controller is present on several BMIPS SoCs (BCM6318, BCM6328, BCM6362 and BCM63268). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200615090943.2936839-5-noltari@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16spi: bcm63xx-spi: allow building for BMIPSÁlvaro Fernández Rojas1-1/+1
bcm63xx-spi controller is present on several BMIPS SoCs (BCM6358, BCM6362, BCM6368 and BCM63268). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200615090943.2936839-3-noltari@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI coreSerge Semin1-3/+6
Seeing all of the DW SPI driver components like DW SPI DMA/PCI/MMIO depend on the DW SPI core code it's better to use the if-endif conditional kernel config statement to signify that common dependency. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-13-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Remove DW DMA code dependency from DW_DMAC_PCISerge Semin1-1/+1
Since there is a generic method available to initialize the DW SPI DMA interface on any DT and ACPI-based platforms, which in general can be designed with not only DW DMAC but with any DMA engine on board, we can freely remove the CONFIG_DW_DMAC_PCI config from dependency list of CONFIG_SPI_DW_DMA. Especially seeing that we don't use anything DW DMAC specific in the new driver. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-12-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Move Non-DMA code to the DW PCIe-SPI driverSerge Semin1-4/+4
This is a preparation patch before adding the DW DMA support into the DW SPI MMIO driver. We need to unpin the Non-DMA-specific code from the intended to be generic DW APB SSI DMA code. This isn't that hard, since the most part of the spi-dw-mid.c driver in fact implements a generic DMA interface for the DW SPI controller driver. The only Intel MID specifics concern getting the max frequency from the MRST Clock Control Unit and fetching the DMA controller channels from corresponding PCIe DMA controller. Since first one is related with the SPI interface configuration we moved it' implementation into the DW PCIe-SPI driver module. After that former spi-dw-mid.c file can be just renamed to be the DW SPI DMA module optionally compiled in to the DW APB SSI core driver. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-11spi: uniphier: Depend on HAS_IOMEMKunihiko Hayashi1-0/+1
The driver uses devm_ioremap_resource() which is only available when CONFIG_HAS_IOMEM is set, so the driver depends on this option. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1589185530-28170-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-27spi: spi-amd: Add AMD SPI controller driver supportSanjay R Mehta1-0/+6
This driver supports SPI Controller for AMD SOCs.This driver supports SPI operations using FIFO mode of transfer. Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/1587844788-33997-1-git-send-email-sanju.mehta@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-02Merge tag 'sound-5.7-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This became again a busy development cycle. There are few ALSA core updates (merely API cleanups and sparse fixes), with the majority of other changes are found in ASoC scene. Here are some highlights: ALSA core: - More helper macros for sparse warning fixes (e.g. bitwise types) - Slight optimization of PCM OSS locks - Make common handling for PCM / compress buffers (for SOF) ASoC: - Lots of code refactoring and modernization for (still ongoing) componentization works - Conversion of SND_SOC_ALL_CODECS to use imply - Continued refactoring and fixing of the Intel SOF/SST support, including the initial (but still incomplete) SoundWire support - SoundWire and more advanced clocking support for Realtek RT5682 - Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563 and TLV320ADCX140 HD-audio: - Optimizations in HDMI jack handling - A few new quirks and fixups for Realtek codecs USB-audio: - Delayed registration support - New quirks for Motu, Kingston, Presonus" * tag 'sound-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits) ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor Revert "ALSA: uapi: Drop asound.h inclusion from asoc.h" ALSA: hda/realtek - Remove now-unnecessary XPS 13 headphone noise fixups ALSA: hda/realtek - Set principled PC Beep configuration for ALC256 ALSA: doc: Document PC Beep Hidden Register on Realtek ALC256 ALSA: hda/realtek - a fake key event is triggered by running shutup ALSA: hda: default enable CA0132 DSP support ASoC: amd: acp3x-pcm-dma: clean up two indentation issues ASoC: tlv320adcx140: Remove undocumented property ASoC: Intel: sof_sdw: Add Volteer support with RT5682 SNDW helper function ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver ASoC: Intel: boards: add sof_sdw machine driver ASoC: Intel: soc-acpi: update topology and driver name for SoundWire platforms ASoC: rt5682: move DAI clock registry to I2S mode ASoC: pxa: magician: convert to use i2c_new_client_device() ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing capabilities Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop quirks ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt handlers ...
2020-03-12spi: meson-spicc: add a linear clock divider supportSunny Luo1-0/+1
The SPICC controller in Meson-AXG SoC is capable of using a linear clock divider to reach a much fine tuned range of clocks, while the old controller only use a power of two clock divider, result at a more coarse clock range. Also convert the clock registration into Common Clock Framework. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Sunny Luo <sunny.luo@amlogic.com> Link: https://lore.kernel.org/r/20200312133131.26430-4-narmstrong@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-11Merge tag 'mtk-mtd-spi-move' of ↵Mark Brown1-0/+10
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.7 spi: Rewrite mtk-quadspi spi-nor driver with spi-mem This patchset from Chuanhong Guo <gch981213@gmail.com> adds a spi-mem driver for Mediatek SPI-NOR controller, which already has limited support by mtk-quadspi. This new driver can make use of full quadspi capability of this controller.
2020-03-11spi: add support for mediatek spi-nor controllerChuanhong Guo1-0/+10
This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-11spi: Stop selecting MTD_SPI_NOR for SPI_HISI_SFC_V3XXJohn Garry1-1/+0
By selecting MTD_SPI_NOR for SPI_HISI_SFC_V3XX, we may introduce unmet dependencies: WARNING: unmet direct dependencies detected for MTD_SPI_NOR Depends on [m]: MTD [=m] && SPI_MASTER [=y] Selected by [y]: - SPI_HISI_SFC_V3XX [=y] && SPI [=y] && SPI_MASTER [=y] && (ARM64 && ACPI [=y] || COMPILE_TEST [=y]) && HAS_IOMEM [=y] Since MTD_SPI_NOR is only selected by SPI_HISI_SFC_V3XX for practical reasons - slave devices use the spi-nor driver, enabled by MTD_SPI_NOR - just drop it. Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1583948115-239907-1-git-send-email-john.garry@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-10spi: Add FSI-attached SPI controller driverEddie James1-0/+7
There exists a set of SPI controllers on some POWER processors that may be accessed through the FSI bus. Add a driver to traverse the FSI CFAM engine that can access and drive the SPI controllers. This driver would typically be used by a baseboard management controller (BMC). The SPI controllers operate by means of programming a sequencing engine which automatically manages the usual SPI protocol buses. The driver programs each transfer into the sequencer as various operations specifying the slave chip and shifting data in and out on the lines. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20200306194118.18581-3-eajames@linux.ibm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-06spi: Remove CONFIG_ prefix from Kconfig selectJoe Perches1-1/+1
commit a2ca53b52e00 ("spi: Add HiSilicon v3xx SPI NOR flash controller driver") likely inadvertently used a select statement with a CONFIG_ prefix, remove the prefix. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Joe Perches <joe@perches.com> Acked-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/f8ac6b32a29b9a05b58a7e58ffe8b780642abbf1.camel@perches.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-12spi: Add generic SPI multiplexerChris Packham1-0/+11
Add a SPI device driver that sits in-band and provides a SPI controller which supports chip selects via a mux-control. This enables extra SPI devices to be connected with limited native chip selects. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200204032838.20739-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-11spi: add driver for ar934x spi controllerChuanhong Guo1-0/+7
This patch adds driver for SPI controller found in Qualcomm Atheros AR934x/QCA95xx SoCs. This controller is a superset of the already supported qca,ar7100-spi. Besides the bit-bang mode in spi-ath79.c, this new controller added a new "shift register" mode, allowing faster spi operations. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200210034152.49063-2-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-11spi: pxa2xx: Enable support for compile-testingGeert Uytterhoeven1-1/+1
m68k/allmodconfig: WARNING: unmet direct dependencies detected for SPI_PXA2XX Depends on [n]: SPI [=y] && SPI_MASTER [=y] && (ARCH_PXA || ARCH_MMP || PCI [=n] || ACPI) Selected by [m]: - SND_SOC_INTEL_BDW_RT5677_MACH [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_SOC_INTEL_MACH [=y] && (SND_SOC_INTEL_HASWELL [=n] || SND_SOC_SOF_BROADWELL [=m]) && I2C [=m] && (I2C_DESIGNWARE_PLATFORM [=m] || COMPILE_TEST [=y]) && (GPIOLIB [=y] || COMPILE_TEST [=y]) && (X86_INTEL_LPSS || COMPILE_TEST [=y]) && SPI_MASTER [=y] This happens because SND_SOC_INTEL_BDW_RT5677_MACH selects SPI_PXA2XX, and the former depends on COMPILE_TEST, while the latter does not. Fix this by enabling compile-testing for SPI_PXA2XX. Fixes: 630db1549356f644 ("ASoC: Intel: bdw-rt5677: fix Kconfig dependencies") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200210093027.6672-1-geert@linux-m68k.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-10spi: Add HiSilicon v3xx SPI NOR flash controller driverJohn Garry1-0/+9
Add the driver for the HiSilicon v3xx SPI NOR flash controller, commonly found in hi16xx chipsets. This is a different controller than that in drivers/mtd/spi-nor/hisi-sfc.c; indeed, the naming for that driver is poor, since it is really known as FMC, and can support other memory technologies. The driver module name is "hisi-sfc-v3xx", as recommended by HW designer, being an attempt to provide a distinct name - v3xx being the unique controller versioning. Only ACPI firmware is supported. DMA is not supported, and we just use polling mode for operation completion notification. The driver uses the SPI MEM OPs. Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1575900490-74467-3-git-send-email-john.garry@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-20spi: Fix Kconfig indentationKrzysztof Kozlowski1-9/+9
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191120133916.13595-1-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-18spi: atmel: Remove platform data supportGregory CLEMENT1-0/+1
This driver is now only used through the device tree. Simplify code by explicitly depend on device tree. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191017141846.7523-6-gregory.clement@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 13:21:56 +0000