summaryrefslogtreecommitdiffstats
path: root/drivers/soundwire
AgeCommit message (Collapse)AuthorFilesLines
2019-11-11Merge 5.4-rc7 into char-misc-nextGreg Kroah-Hartman3-3/+5
We need the char/misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-09soundwire: ignore uniqueID when irrelevantPierre-Louis Bossart2-7/+52
The uniqueID is useful when there are two or more devices of the same type (identical manufacturer ID, part ID) on the same link. When there is a single device of a given type on a link, its uniqueID is irrelevant. It's not uncommon on actual platforms to see variations of the uniqueID, or differences between devID registers and ACPI _ADR fields. This patch suggests a filter on startup to identify 'single' devices and tag them accordingly. The uniqueID is then not used for the probe, and the device name omits the uniqueID as well. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022234808.17432-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-09soundwire: slave: add helper to extract slave IDPierre-Louis Bossart1-19/+31
Simplify the loop with a helper. The only functionality change is that we continue the loop even with an ACPI error. Follow-up patches will build on this change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022234808.17432-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-09soundwire: intel: fix PDI/stream mapping for BulkPierre-Louis Bossart1-2/+8
The previous formula is incorrect for PDI0/1, the mapping is not linear but has a discontinuity between PDI1 and PDI2. This change has no effect on PCM PDIs (same mapping). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022232948.17156-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24soundwire: cadence_master: make clock stop exit configurable on initPierre-Louis Bossart3-9/+10
The use of clock stop is not a requirement, the IP can e.g. be completely power gated and not detect any wakes while in s2idle/deep sleep. For now clock-stop is not supported anyways so the control parameter is always false. This will be revisited when we add clock stop. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022235448.17586-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24soundwire: intel/cadence: add flag for interrupt enablePierre-Louis Bossart3-13/+20
Prepare for future PM support and fix error handling by disabling interrupts as needed. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022235448.17586-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24soundwire: intel: add helper for initializationPierre-Louis Bossart1-5/+11
Move code to helper for reuse in power management routines Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022235448.17586-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24soundwire: cadence_master: add hw_reset capability in debugfsPierre-Louis Bossart1-0/+23
Provide debugfs capability to kick link and devices into hard-reset (as defined by MIPI). This capability is really useful when some devices are no longer responsive and/or to check the software handling of resynchronization. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022235448.17586-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24soundwire: intel/cadence: fix startup sequencePierre-Louis Bossart3-26/+69
Multiple changes squashed in single patch to avoid tick-tock effect and avoid breaking compilation/bisect 1. Per the hardware documentation, all changes to MCP_CONFIG, MCP_CONTROL, MCP_CMDCTRL and MCP_PHYCTRL need to be validated with a self-clearing write to MCP_CONFIG_UPDATE. Add a helper and do the update when the CONFIG is changed. 2. Move interrupt enable after interrupt handler registration 3. Add a new helper to start the hardware bus reset with maximum duration to make sure the Slave(s) correctly detect the reset pattern and to ensure electrical conflicts can be resolved. 4. flush command FIFOs Better error handling will be provided after interrupt disable is provided in follow-up patches. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022235448.17586-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-24soundwire: slave: fix scanf formatPierre-Louis Bossart1-1/+2
fix cppcheck warning: [drivers/soundwire/slave.c:145]: (warning) %x in format string (no. 1) requires 'unsigned int *' but the argument type is 'signed int *'. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022233147.17268-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-22soundwire: intel: use correct header for io callsVinod Koul1-1/+1
Commit df72b7192119 ("soundwire: intel: add missing headers for cross-compilation") tried to fix cross compilation but erroneously used wrong header in one of the file. Fix it by using correct io.h header. Reported-by: kbuild test robot <lkp@intel.com> Fixes: df72b7192119 ("soundwire: intel: add missing headers for cross-compilation") Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21soundwire: intel: fix intel_register_dai PDI offsets and numbersBard Liao1-2/+2
There are two issues, likely copy/paste: 1. Use cdns->pcm.num_in instead of stream_num_in for consistency with the rest of the code. This was not detected earlier since platforms did not have input-only PDIs. 2. use the correct offset for bi-dir PDM, based on IN and OUT PDIs. Again this was not detected since PDM was not supported earlier. Reported-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916192348.467-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21soundwire: cadence_master: improve PDI allocationBard Liao3-19/+17
PDI number should match dai->id, there is no need to track if a PDI is allocated or not. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916192348.467-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21soundwire: intel: don't filter out PDI0/1Pierre-Louis Bossart1-18/+11
PDI0/1 are reserved for Bulk and filtered out in the existing code. That leads to endless confusions on whether the index is the raw or corrected one. In addition we will need support for Bulk at some point so it's just simpler to expose those PDIs and not use it for now than try to be smart unless we have to remove the smarts. This patch requires a topology change to use PDIs starting at offset 2 explicitly. Note that there is a known discrepancy between hardware documentation and what ALH stream works in practice, future fixes are likely. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916192348.467-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21soundwire: cadence/intel: simplify PDI/port mappingPierre-Louis Bossart3-224/+51
The existing Linux code uses a 1:1 mapping between ports and PDIs, but still has an independent allocation of ports and PDIs. Let's simplify the code and remove the port layer by only using PDIs. This patch does not change any functionality, just removes unnecessary code. This will also allow for further simplifications where the PDIs are not dynamically allocated but instead described in a topology file. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916192348.467-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21soundwire: intel: remove playback/capture stream_nameBard Liao1-17/+0
We will create dai widget in SOF. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916192348.467-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-21soundwire: remove DAI_ID_RANGE definitionsPierre-Louis Bossart1-2/+0
There is no reason to reserve a range of DAI IDs for SoundWire. This is not scalable and it's better to let the ASoC core allocate the dai->id when registering a component. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916192348.467-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-16soundwire: intel: remove X86 dependencyPierre-Louis Bossart1-1/+1
This is not needed and may generate unmet dependencies when COMPILE_TEST is used for SOF. ACPI is required, and should be tested when selecting this option. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916185739.32184-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-16soundwire: intel: add missing headers for cross-compilationPierre-Louis Bossart2-0/+2
readl/writel and ioread32 are used without the relevant headers, fix. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916185739.32184-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-15soundwire: depend on ACPI || OFMichal Suchanek1-1/+1
Now devicetree is supported for probing soundwire as well. On platforms built with !ACPI !OF (ie s390x) the device still cannot be probed and gives a build warning. Cc: stable@vger.kernel.org Fixes: a2e484585ad3 ("soundwire: core: add device tree support for slave devices") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Link: https://lore.kernel.org/r/0b89b4ea16a93f523105c81a2f718b0cd7ec66f2.1570097621.git.msuchanek@suse.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-15soundwire: depend on ACPIMichal Suchanek1-0/+1
The device cannot be probed on !ACPI and gives this warning: drivers/soundwire/slave.c:16:12: warning: ‘sdw_slave_add’ defined but not used [-Wunused-function] static int sdw_slave_add(struct sdw_bus *bus, ^~~~~~~~~~~~~ Cc: stable@vger.kernel.org Fixes: 7c3cd189b86d ("soundwire: Add Master registration") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Link: https://lore.kernel.org/r/bd685232ea511251eeb9554172f1524eabf9a46e.1570097621.git.msuchanek@suse.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-09-22Merge tag 'soundwire-5.4-rc1' of ↵Linus Torvalds12-99/+718
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: "This includes DT support thanks to Srini and more work done by Intel (Pierre) on improving cadence and intel support. Summary: - Add DT bindings and DT support in core - Add debugfs support for soundwire properties - Improvements on streaming handling to core - Improved handling of Cadence module - More updates and improvements to Intel driver" * tag 'soundwire-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (30 commits) soundwire: stream: make stream name a const pointer soundwire: Add compute_params callback soundwire: core: add device tree support for slave devices dt-bindings: soundwire: add slave bindings soundwire: bus: set initial value to port_status soundwire: intel: handle disabled links soundwire: intel: add debugfs register dump soundwire: cadence_master: add debugfs register dump soundwire: add debugfs support soundwire: intel: remove unused variables soundwire: intel: move shutdown() callback and don't export symbol soundwire: cadence_master: add kernel parameter to override interrupt mask soundwire: intel_init: add kernel module parameter to filter out links soundwire: cadence_master: fix divider setting in clock register soundwire: cadence_master: make use of mclk_freq property soundwire: intel: read mclk_freq property from firmware soundwire: add new mclk_freq field for properties soundwire: stream: remove unnecessary variable initializations soundwire: stream: fix disable sequence soundwire: include mod_devicetable.h to avoid compiling warnings ...
2019-09-04soundwire: stream: make stream name a const pointerSrinivas Kandagatla1-1/+1
Make stream name const pointer Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190813083550.5877-3-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-09-04soundwire: Add compute_params callbackVinod Koul1-0/+10
This callback allows masters to compute the bus parameters required. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190813083550.5877-2-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-09-04soundwire: core: add device tree support for slave devicesSrinivas Kandagatla3-0/+55
This patch adds support to parsing device tree based SoundWire slave devices. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190829163514.11221-3-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-09-04soundwire: bus: set initial value to port_statusBard Liao1-1/+1
port_status[port_num] are assigned for each port_num in some if conditions. So some of the port_status may not be initialized. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190829181135.16049-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-23soundwire: intel: handle disabled linksPierre-Louis Bossart1-3/+22
On most hardware platforms, SoundWire interfaces are pin-muxed with other interfaces (typically DMIC or I2S) and the status of each link needs to be checked at boot time. For Intel platforms, the BIOS provides a menu to enable/disable the links separately, and the information is provided to the OS with an Intel-specific _DSD property. The same capability will be added to revisions of the MIPI DisCo specification. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190821185821.12690-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-23soundwire: intel: add debugfs register dumpPierre-Louis Bossart1-0/+121
Add debugfs file to dump the Intel SoundWire registers Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190821185821.12690-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-23soundwire: cadence_master: add debugfs register dumpPierre-Louis Bossart2-0/+111
Add debugfs file to dump the Cadence master registers. Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190821185821.12690-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-23soundwire: add debugfs supportPierre-Louis Bossart6-0/+181
Add base debugfs mechanism for SoundWire bus by creating soundwire root and master-N and slave-x hierarchy. Also add SDW Slave SCP, DP0 and DP-N register debug file. Registers not implemented will print as "XX" Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190821185821.12690-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-22soundwire: intel: remove unused variablesVinod Koul1-1/+0
Variables 'nval' and 'i' are no longer used sdw_master_read_intel_prop() so remove them. drivers/soundwire/intel.c: In function 'sdw_master_read_intel_prop': drivers/soundwire/intel.c:829:12: warning: unused variable 'i' [-Wunused-variable] int nval, i; ^ drivers/soundwire/intel.c:829:6: warning: unused variable 'nval' [-Wunused-variable] int nval, i; ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 085f4ace103d ("soundwire: intel: read mclk_freq property from firmware") Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: intel: move shutdown() callback and don't export symbolPierre-Louis Bossart3-18/+15
All DAI callbacks are in intel.c except for shutdown. Move and remove export symbol Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-18-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: cadence_master: add kernel parameter to override interrupt maskPierre-Louis Bossart1-0/+7
The code has a set of defaults which may not be relevant in all cases, add kernel parameter as a helper - mostly for early board bring-up. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-17-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: intel_init: add kernel module parameter to filter out linksPierre-Louis Bossart1-0/+11
The hardware and ACPI info may report the presence of links that are not physically enabled (e.g. due to pin-muxing or hardware reworks), which in turn can result in errors being thrown. This shouldn't be the case for production devices but will happen a lot on development devices - even more so when they expose a connector. Even when the ACPI information is correct, it's useful to be able to only enable the links that need attention - mostly to filter out dynamic debug messages. Add a module parameter to filter out such links, e.g. adding the following config to a file in /etc/modprobe.d will select the second and third links only. options soundwire_intel_init sdw_link_mask=0x6 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-16-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: cadence_master: fix divider setting in clock registerRander Wang1-8/+8
The existing code uses an OR operation which would mix the original divider setting with the new one, resulting in an invalid configuration that can make codecs hang. Add the mask definition and use cdns_updatel to update divider Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-14-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: cadence_master: make use of mclk_freq propertyPierre-Louis Bossart1-4/+10
Now that the prototype and Intel implementation are enabled, use this property to avoid hard-coded values. For example for ICL the mclk_freq value is 38.4 MHz while on CNL/CML it's 24 MHz. The mclk_freq should not be confused with the max_clk_freq, which si the maximum bus clock. The mclk_freq is typically tied to the oscillator frequency and does not change between platforms. The max_clk_freq value is linked to the maximum bandwidth needed and topology/trace length. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-13-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: intel: read mclk_freq property from firmwarePierre-Louis Bossart1-0/+26
The BIOS provides an Intel-specific property, let's use it to avoid hard-coded clock dividers. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-12-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: stream: remove unnecessary variable initializationsPierre-Louis Bossart1-26/+38
A number of variables don't need to be initialized. In a couple of cases where we loop on a list of runtimes, the code handling of the 'bus' variable leads to warnings that it may not be initialized. Add a specific error case to trap such cases. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-10-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: stream: fix disable sequencePierre-Louis Bossart1-1/+18
When we disable the stream and then call hw_free, two bank switches will be handled and as a result we re-enable the stream on hw_free. Make sure the stream is disabled on both banks. TODO: we need to completely revisit all this and make sure we have a mirroring mechanism between current and alternate banks. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-9-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: cadence_master: use firmware defaults for frame shapePierre-Louis Bossart1-3/+23
Remove hard-coding and use firmware (BIOS/DT) values. If they are wrong use default 48x2 frame shape. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: export helpers to find row and column valuesPierre-Louis Bossart2-8/+13
Add a prefix for common tables and export 2 helpers to set the frame shapes based on row/col values. These changes simplify bandwidth allocation algorithms as well as the Cadence parts which all need to convert from frame shape to indices used by the standard. These helpers are used in the following patch. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: bus: improve dynamic debug comments for enumerationPierre-Louis Bossart1-1/+4
update comments to provide better understanding of enumeration flows. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: cadence_master: revisit interrupt settingsPierre-Louis Bossart1-4/+25
Adding missing interrupt masks (parity, etc) and missing checks. Clarify which masks are for which usage. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: intel: fix channel number reported by hardwarePierre-Louis Bossart1-0/+10
On all released Intel controllers (CNL/CML/ICL), PDI2 reports an invalid count, force the correct hardware-supported value This may have to be revisited with platform-specific values if the hardware changes, but for now this is good enough. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: intel: prevent possible dereference in hw_paramsPierre-Louis Bossart1-2/+4
This should not happen in production systems but we should test for all callback arguments before invoking the config_stream callback. Update the prototype to clarify that the first argument is mandatory. Also use local variable instead of multiple dereferences to improve readability. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-09soundwire: fix regmap dependencies and align with other serial linksPierre-Louis Bossart2-7/+2
The existing code has a mixed select/depend usage which makes no sense. config SOUNDWIRE_BUS tristate select REGMAP_SOUNDWIRE config REGMAP_SOUNDWIRE tristate depends on SOUNDWIRE_BUS Let's remove one layer of Kconfig definitions and align with the solutions used by all other serial links. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190718230215.18675-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-02soundwire: bus: split handling of Device0 eventsPierre-Louis Bossart1-0/+5
Assigning a device number to a Slave will result in additional events when it reports its status in a PING frame. There is no point in dealing with all the other devices in a loop, this can be done when a non-device0 event happens. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190725234032.21152-19-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-02soundwire: cadence_master: fix definitions for INTSTAT0/1Pierre-Louis Bossart1-2/+2
Two off-by-one errors: INTSTAT0 missed BIT(31) and INTSTAT1 is only defined on first 16 bits. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190725234032.21152-15-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-02soundwire: cadence_master: fix register definition for SLAVE_STATEPierre-Louis Bossart1-2/+2
wrong prefix and wrong macro. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190725234032.21152-14-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-02soundwire: cadence_master: simplify bus clash interrupt clearPierre-Louis Bossart1-2/+0
The bus clash interrupts are generated when the status is one, and also cleared by writing a one. It's overkill/useless to use an OR when the bit is already set. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190725234032.21152-12-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 18:42:15 +0000