summaryrefslogtreecommitdiffstats
path: root/drivers/soc
AgeCommit message (Collapse)AuthorFilesLines
2017-09-22soc/fsl/qbman: Rework portal mapping calls for ARM/PPCRoy Pledge7-66/+60
Rework portal mapping for PPC and ARM. The PPC devices require a cacheable coherent mapping while ARM will work with a non-cachable/write combine mapping. This also eliminates the need for manual cache flushes on ARM. This also fixes the code so sparse checking is clean. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Fix ARM32 typoValentin Rothberg1-1/+1
The Kconfig symbol for 32bit ARM is 'ARM', not 'ARM32'. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Drop L1_CACHE_BYTES compile time checkClaudiu Manoil1-4/+0
Not relevant and arch dependent. Overkill for PPC. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Drop set/clear_bits usageMadalin Bucur2-5/+5
Replace PPC specific set/clear_bits API with standard bit twiddling so driver is portalable outside PPC. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Use shared-dma-pool for QMan private memory allocationsRoy Pledge3-34/+63
Use the shared-memory-pool mechanism for frame queue descriptor and packed frame descriptor record area allocations. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Use shared-dma-pool for BMan private memory allocationsRoy Pledge1-0/+15
Use the shared-memory-pool mechanism for free buffer proxy record area allocation. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qbman: Add common routine for QBMan private allocationsRoy Pledge3-1/+83
The QBMan device uses several memory regions to manage frame queues and buffers. Add a common routine for extracting and initializing these reserved memory areas. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/guts: Add compatible string for LS1088ashish kumar1-0/+1
Adding compatible string "ls1088a-dcfg" so that guts driver can be init for ls1088 Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-22soc/fsl/qman: Sleep instead of stuck hacking jiffiesKarim Eshapa1-5/+1
Use msleep() instead of stucking with long delay will be more efficient. Signed-off-by: Karim Eshapa <karim.eshapa@gmail.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2017-09-18soc: renesas: rcar-sysc: add R8A77970 supportSergei Shtylyov5-0/+49
Add support for R-Car V3M (R8A77970) SoC power areas to the R-Car SYSC driver. Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18soc: renesas: identify R-Car V3MSergei Shtylyov1-0/+8
Add support for identifying the R-Car V3M (R8A77970) SoC. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18soc: renesas: rcar-rst: add R8A77970 supportSergei Shtylyov2-1/+3
Add support for R-Car V3M (R8A77970) to the R-Car RST driver -- this driver is needed for the clock driver to work. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-17drivers: soc: atmel: Add basic support for new sama5d2 SiPsCristian Birsan2-0/+12
Add basic support for new sama5d2 System in a Package chips. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> [claudiu.beznea@microchip.com: use MiB instead of MB] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-15Merge branch '4.14-features' of ↵Linus Torvalds4-0/+350
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
2017-09-10Merge tag 'armsoc-drivers' of ↵Linus Torvalds30-159/+588
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This branch contains platform-related driver updates for ARM and ARM64. Among them: - Reset driver updates: + New API for dealing with arrays of resets + Make unimplemented {de,}assert return success on shared resets + MSDKv1 driver + Removal of obsolete Gemini reset driver + Misc updates for sunxi and Uniphier - SoC drivers: + Platform SoC driver registration on Tegra + Shuffle of Qualcomm drivers into a submenu + Allwinner A64 support for SRAM + Renesas R-Car R3 support + Power domains for Rockchip RK3366 - Misc updates and smaller fixes for TEE and memory driver subsystems" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set soc/tegra: fuse: Add missing semi-colon soc/tegra: Restrict SoC device registration to Tegra drivers: soc: sunxi: add support for A64 and its SRAM C drivers: soc: sunxi: add support for remapping func value to reg value drivers: soc: sunxi: fix error processing on base address when claiming dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C bus: sunxi-rsb: Enable by default for ARM64 soc/tegra: Register SoC device firmware: tegra: set drvdata earlier memory: Convert to using %pOF instead of full_name soc: Convert to using %pOF instead of full_name bus: Convert to using %pOF instead of full_name firmware: Convert to using %pOF instead of full_name soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC soc: mediatek: add header files required for MT7622 SCPSYS dt-binding soc: mediatek: reduce code duplication of scpsys_probe across all SoCs dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC reset: uniphier: add analog amplifiers reset control reset: uniphier: add video input subsystem reset control ...
2017-09-10Merge tag 'armsoc-platforms' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch contains platform updates for 32- and 64-bit ARM, including defconfig updates to enable new options, drivers and platforms. There are also a few fixes and cleanups for some existing vendors. Some of the things worth highlighting here are: - Enabling new crypt drivers on arm64 defconfig - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig - Debug support enabled for Renesas r8a7743 - Various config updates for Renesas platforms (sound, USB, other drivers) - Platform support (including SMP) for TI dra762 - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code" * tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: multi_v7_defconfig: make eSDHC driver built-in arm64: defconfig: enable rockchip graphics MAINTAINERS: Update Cavium ThunderX2 entry ARM: config: aspeed: Add I2C, VUART, LPC Snoop ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G ARM: s3c24xx: Fix NAND ECC mode for mini2440 board ARM: davinci_all_defconfig: enable tinydrm and ST7586 arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl ARM: defconfig: tegra: Enable ChipIdea UDC driver ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig ARM: tegra: Add Tegra I2S interfaces to defconfig ARM: tegra: Update default configuration for v4.13-rc1 MAINTAINERS: update ARM/ZTE entry soc: versatile: remove unnecessary static in realview_soc_probe() ARM: Convert to using %pOF instead of full_name ARM: hisi: Fix typo in comment ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add recently added crypto drivers as modules arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG ...
2017-09-09Merge tag 'rproc-v4.14' of git://github.com/andersson/remoteprocLinus Torvalds3-0/+174
Pull remoteproc updates from Bjorn Andersson: "This adds and improves remoteproc support for TI DA8xx/OMAP-L13x DSP, TI Keystone 66AK2G DSP and iMX6SX/7D Cortex M4 coprocessors. It introduces the Qualcomm restart notifier and a few fixes" * tag 'rproc-v4.14' of git://github.com/andersson/remoteproc: remoteproc: Introduce rproc handle accessor for children remoteproc: qcom: Make ssr_notifiers local remoteproc: Stop subdevices in reverse order remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver remoteproc: dt: Provide bindings for iMX6SX/7D Remote Processor Controller driver remoteproc: qcom: Use PTR_ERR_OR_ZERO remoteproc: st: explicitly request exclusive reset control remoteproc: qcom: explicitly request exclusive reset control remoteproc/keystone: explicitly request exclusive reset control remoteproc/keystone: Add support for Keystone 66AK2G SOCs remoteproc/davinci: Add device tree support for OMAP-L138 DSP dt-bindings: remoteproc: Add bindings for Davinci DSP processors remoteproc/davinci: Add support to parse internal memories remoteproc/davinci: Switch to platform_get_resource_byname() remoteproc: make device_type const soc: qcom: GLINK SSR notifier remoteproc: qcom: Add support for SSR notifications remoteproc: Merge __rproc_boot() with rproc_boot()
2017-09-04MIPS: lantiq: Add a GPHY driver which uses the RCU syscon-mfdMartin Blumenstingl2-0/+261
Compared to the old xrx200_phy_fw driver the new version has multiple enhancements. The name of the firmware files does not have to be added to all .dts files anymore - one now configures the GPHY mode (FE or GE) instead. Each GPHY can now also boot separate firmware (thus mixing of GE and FE GPHYs is now possible). The new implementation is based on the RCU syscon-mfd and uses the reeset_controller framework instead of raw RCU register reads/writes. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Cc: john@phrozen.org Cc: p.zabel@pengutronix.de Cc: kishon@ti.com Cc: mark.rutland@arm.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-spi@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17128/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04MIPS: lantiq: Convert the fpi bus driver to a platform_driverHauke Mehrtens3-0/+89
Instead of hacking the configuration of the FPI bus into the arch code add an own bus driver for this internal bus. The FPI bus is the main bus of the SoC. This bus driver makes sure the bus is configured correctly before the child drivers are getting initialized. This driver will probably also be used on different SoCs later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: john@phrozen.org Cc: p.zabel@pengutronix.de Cc: kishon@ti.com Cc: mark.rutland@arm.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-spi@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17122/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-23Merge tag 'samsung-drivers-4.14-2' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Pull "Samsung soc drivers changes for v4.14" from Krzysztof Kozłowski: Conversion to kbasename from Rob Herring. * tag 'samsung-drivers-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: Use kbasename instead of open coding
2017-08-23soc/tegra: fuse: Add missing semi-colonThierry Reding1-1/+1
Commit 8a46828e623c ("soc/tegra: Register SoC device") added a new initcall, but forgot to terminate the line with a semi-colon. Some recent versions of GCC seem to report this as an error. Fixes: 8a46828e623c ("soc/tegra: Register SoC device") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-23soc/tegra: Restrict SoC device registration to TegraThierry Reding1-0/+8
Commit 8a46828e623c ("soc/tegra: Register SoC device") added an initcall to register the SoC device on Tegra. However, that code is unrestricted and will run on all platforms, causing unwanted warnings. Fix this by first checking that we're running on hardware that supports the fuses block that we use to provide SoC information. Fixes: 8a46828e623c ("soc/tegra: Register SoC device") Reported-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-21Merge tag 'sunxi-drivers-for-4.14' of ↵Arnd Bergmann1-9/+48
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers Pull "Allwinner driver changes for 4.14" from Chen-Yu Tsai: Usual driver changes: - SUNXI_RSB bus driver enabled by default for ARM64 - Support for SRAM controller and SRAM C block on the A64 added * tag 'sunxi-drivers-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: drivers: soc: sunxi: add support for A64 and its SRAM C drivers: soc: sunxi: add support for remapping func value to reg value drivers: soc: sunxi: fix error processing on base address when claiming dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C bus: sunxi-rsb: Enable by default for ARM64
2017-08-21soc: ti: knav: Add a NULL pointer check for kdev in knav_pool_createKeerthy1-0/+3
knav_pool_create is an exported function. In the event of a call before knav_queue_probe, we encounter a NULL pointer dereference in the following line. Hence return -EPROBE_DEFER to the caller till the kdev pointer is non-NULL. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-18Merge tag 'tegra-for-4.14-soc' of ↵Arnd Bergmann3-5/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Pull "soc/tegra: Changes for v4.14-rc1" from Thierry Reding: Contains a fix for unbalanced reference counting of device tree nodes in the PMC-based generic power domains code. A second change moves the SoC device registration code from its old location in arch/arm/mach-tegra to drivers/soc/tegra so that it can be shared between 32-bit and 64-bit ARM Tegra SoCs. * tag 'tegra-for-4.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: Register SoC device soc/tegra: Fix bad of_node_put() in powergate init
2017-08-18Merge tag 'v4.13-next-soc' of https://github.com/mbgg/linux-mediatek into ↵Arnd Bergmann2-103/+150
next/drivers Pull "arm: mediatek: soc updates for v4.14" from Matthias Brugger: - add mt7623a smp support - scpsys: reduce code duplication - scpsys: add mt7622 support - pmic wrapper: make of_device_ids constant * tag 'v4.13-next-soc' of https://github.com/mbgg/linux-mediatek: soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC soc: mediatek: add header files required for MT7622 SCPSYS dt-binding soc: mediatek: reduce code duplication of scpsys_probe across all SoCs dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC soc: mtk-pmic-wrap: make of_device_ids const. ARM: mediatek: add MT7623a smp bringup code
2017-08-18soc: ti: ti_sci_pm_domains: Populate name for genpdDave Gerlach1-0/+2
Commit b6a1d093f96b ("PM / Domains: Extend generic power domain debugfs") now creates a debugfs directory for each genpd based on the name of the genpd. Currently no name is given to the genpd created by ti_sci_pm_domains driver so because of this we see a NULL pointer dereferences when it is accessed on boot when the debugfs entry creation is attempted. Give the genpd a name before registering it to avoid this. Fixes: 52835d59fc6c ("soc: ti: Add ti_sci_pm_domains driver") Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-18drivers: soc: sunxi: add support for A64 and its SRAM CIcenowy Zheng1-0/+11
Allwinner A64's display engine claims the SRAM C section to work. Add support for the A64 SRAM controller and the SRAM C section of it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-18drivers: soc: sunxi: add support for remapping func value to reg valueIcenowy Zheng1-9/+34
On some Allwinner SoCs, sometimes the value needed to write into the register to claim SRAM is not equal to the value specified in the device tree. The device tree binding defines 0 as "mapped to CPU" and 1 as "mapped to X device". This matches the value written to the configuration register for the SRAM blocks currently supported. However, the not yet supported VE SRAM block is claimed for the device by writing 0x7fffffff, which is vastly different from the other blocks. On the A64, SRAM C is claimed by the device by writing a 0, which is the opposite of the current design. Add a value remapping in sunxi_sram_func structure, and let the sunxi_sram_of_parse function set the remapped register value. This allows us to keep the convention currently used in the device tree binding. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> [wens@csie.org: Clarified commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-18drivers: soc: sunxi: fix error processing on base address when claimingIcenowy Zheng1-0/+3
When claiming SRAM, if the base is set to an error, it means that the SRAM controller has been probed, but failed to remap the controller memory zone. If the base is zero, thus the SRAM controller should be not probed at all, and it should return -EPROBE_DEFER. However, currently we returned -EPROBE_DEFER in the former situation, and ignored the latter situation (which will lead to the kernel to panic). Fix the behavior on abnormal base address processing when claiming. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Fixes: 4af34b572a85 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs") Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-17soc/tegra: Register SoC deviceThierry Reding2-2/+51
Move this code from arch/arm/mach-tegra and make it common among 32-bit and 64-bit Tegra SoCs. This is slightly complicated by the fact that on 32-bit Tegra, the SoC device is used as the parent for all devices that are instantiated from device tree. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-08-17Merge tag 'amlogic-drivers' of ↵Arnd Bergmann5-0/+192
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/drivers Pull "Amlogic driver updates for v4.14" from Kevin Hilman: - add SoC info driver * tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: soc: Add Amlogic SoC Information driver dt-bindings: arm: amlogic: Add SoC information bindings
2017-08-16soc: versatile: remove unnecessary static in realview_soc_probe()Gustavo A. R. Silva1-1/+1
Remove unnecessary static on local variables syscon_regmap. Such variables are initialized before being used, on every execution path throughout the functions. The static has no benefit and, removing it reduces the object file size. This issue was detected using Coccinelle and the following semantic patch: @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; In the following log you can see the difference in the object file size. This log is the output of the size command, before and after the code change: before: text data bss dec hex filename 3339 2104 128 5571 15c3 drivers/soc/versatile/soc-realview.o after: text data bss dec hex filename 3321 2048 64 5433 1539 drivers/soc/versatile/soc-realview.o Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-16Merge tag 'renesas-drivers-for-v4.14' of ↵Arnd Bergmann7-1/+51
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers Pull "Renesas ARM Based SoC Drivers Updates for v4.14" from Simon Horman: Add R-Car D3 (r8a77995) support to the Renesas-specific SoC drivers - SoC identification - System controller - Reset controller * tag 'renesas-drivers-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: rcar-rst: Add support for R-Car D3 soc: renesas: rcar-sysc: Add support for R-Car D3 power areas soc: renesas: Add r8a77995 SYSC PM Domain Binding Definitions soc: renesas: Identify R-Car D3
2017-08-16Merge tag 'qcom-drivers-for-4.14' of ↵Arnd Bergmann4-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Pull "Qualcomm ARM Based Driver Updates for v4.14" from Andy Gross: * Minor fixes for SMSM and WCNSS_CTRL * Move Qcom SoC drivers to submenu * Fix mdt_loader to use request_firmware_into_buf() * tag 'qcom-drivers-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: soc: qcom: mdt_loader: Use request_firmware_into_buf() soc: qcom: bring all qcom drivers into a submenu soc: qcom: wcnss_ctrl: add missing MODULE_DEVICE_TABLE() soc: qcom: smsm: fix of_node refcnting problem
2017-08-16Merge tag 'v4.14-rockchip-drivers-1' of ↵Arnd Bergmann2-0/+46
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers Pull "Rockchip driver changes for 4.14" from Heiko Stübner: Powerdomain support for rk3366 and disabling of the automatic jtag/sdmmc switching for rk3328. * tag 'v4.14-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: power-domain: add power domain support for rk3366 dt-bindings: add binding for rk3366 power domains dt-bindings: power: add RK3366 SoCs header for power-domain soc: rockchip: disable jtag switching for RK3328 Soc
2017-08-16soc: Convert to using %pOF instead of full_nameRob Herring9-36/+31
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Cc: Scott Wood <oss@buserror.net> Cc: Qiang Zhao <qiang.zhao@nxp.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-15Merge tag 'imx-fixes-4.13-2' of ↵Arnd Bergmann1-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "i.MX fixes for 4.13, round 2" from Shawn Guo: - Add missing 'ranges' property for i.MX25 device tree TSCADC node, so that it's child nodes ADC and TSC device can be probed by kernel. - Fix i.MX GPCv2 power domain driver to request regulator after power domain initialization, since regulator could defer probing and therefore cause power domain initialized twice. * tag 'imx-fixes-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: i.MX25: add ranges to tscadc soc: imx: gpcv2: fix regulator deferred probe
2017-08-14soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoCSean Wang1-0/+71
Add SCPSYS power domain driver for MT7622 SoC having four power domains which are respectively ETHSYS for Ethernet including embedded switch, WBSYS for WIFI and Bluetooth, HIF0SYS for PCI-E and SATA, and HIF1SYS for USB. Those functions could be selectively powered gated when the corresponding function is no longer to use in order to reach more minimal power dissipation. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-08-14soc: mediatek: reduce code duplication of scpsys_probe across all SoCsSean Wang1-103/+79
Reduce code duplication of scpsys_probe_mtXXXX across all SoCs using the more generic scpsys_probe all covering all cases to avoid starting to bloat the driver when more MediaTek SoCs supported are added. Suggested-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-08-08soc: qcom: mdt_loader: Use request_firmware_into_buf()Bjorn Andersson1-3/+2
By switching to the request_firmware_into_buf() we load the segment data straight into the preallocated buffers, reducing the need for allocating scratch buffers for these. In particular the modem firmware consists of multiple segments in the range 5-15MB, making this worth while. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-08soc: qcom: bring all qcom drivers into a submenuSrinivas Kandagatla1-0/+4
As the number of qcom drivers increase, entries in SOC menu looks scattered with other SOC drivers. Make a submenu for Qcom drivers to make it visibly clear while selecting qcom SOC specific drivers. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-08soc: qcom: wcnss_ctrl: add missing MODULE_DEVICE_TABLE()Rob Clark1-0/+1
This fixes a problem of wifi module not loading on db410c. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-08soc: qcom: smsm: fix of_node refcnting problemRob Clark1-1/+2
of_find_node_with_property() drops the reference to the 'from' node, which eventually (after enough -EPROBE_DEFERs) drops the last reference to the node causing all sorts of fun problems, and this nice splat. BUG: sleeping function called from invalid context at ../kernel/locking/mutex.c:747 in_atomic(): 1, irqs_disabled(): 128, pid: 33, name: kworker/0:1 4 locks held by kworker/0:1/33: #0: ("events"){.+.+.+}, at: [<ffff0000080fa91c>] process_one_work+0x1a4/0x728 #1: (deferred_probe_work){+.+.+.}, at: [<ffff0000080fa91c>] process_one_work+0x1a4/0x728 #2: (&dev->mutex){......}, at: [<ffff000008676078>] __device_attach+0x30/0x168 #3: (devtree_lock){......}, at: [<ffff000008828fd0>] of_find_node_with_property+0x30/0xe0 irq event stamp: 18976 hardirqs last enabled at (18975): [<ffff00000815794c>] __down_trylock_console_sem+0x74/0xb8 hardirqs last disabled at (18976): [<ffff0000089e26d4>] _raw_spin_lock_irqsave+0x2c/0x78 softirqs last enabled at (16880): [<ffff0000080e0f00>] __do_softirq+0x580/0x640 softirqs last disabled at (16871): [<ffff0000080e13a4>] irq_exit+0xe4/0x138 CPU: 0 PID: 33 Comm: kworker/0:1 Tainted: G E 4.12.0-rc5+ #1455 Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc1-00234-g22fa70a-dirty 06/26/2017 Workqueue: events deferred_probe_work_func Call trace: [<ffff000008089ee0>] dump_backtrace+0x0/0x230 [<ffff00000808a134>] show_stack+0x24/0x30 [<ffff0000084e1944>] dump_stack+0xac/0xe8 [<ffff00000810d7e0>] ___might_sleep+0x150/0x230 [<ffff00000810d918>] __might_sleep+0x58/0x90 [<ffff0000089dde18>] __mutex_lock+0x50/0x870 [<ffff0000089de674>] mutex_lock_nested+0x3c/0x50 [<ffff000008388ae0>] kernfs_remove+0x30/0x50 [<ffff00000838b720>] sysfs_remove_dir+0x58/0x70 [<ffff0000084e393c>] kobject_del+0x1c/0x58 [<ffff0000084e374c>] kobject_put+0xb4/0x208 [<ffff00000882c364>] of_node_put+0x24/0x30 [<ffff000008829018>] of_find_node_with_property+0x78/0xe0 [<ffff000000aff5f4>] qcom_smsm_probe+0x194/0x720 [smsm] [<ffff0000086793b4>] platform_drv_probe+0x74/0x110 [<ffff0000086765bc>] driver_probe_device+0x2b4/0x420 [<ffff000008676920>] __device_attach_driver+0xd0/0x150 [<ffff000008673e78>] bus_for_each_drv+0x68/0xa8 [<ffff00000867611c>] __device_attach+0xd4/0x168 [<ffff000008676a1c>] device_initial_probe+0x24/0x30 [<ffff000008675380>] bus_probe_device+0xa0/0xa8 [<ffff000008675948>] deferred_probe_work_func+0xb8/0xf8 [<ffff0000080fa9d4>] process_one_work+0x25c/0x728 [<ffff0000080faef4>] worker_thread+0x54/0x3d8 [<ffff0000081031d8>] kthread+0x110/0x140 [<ffff000008082d90>] ret_from_fork+0x10/0x40 OF: ERROR: Bad of_node_put() on /smsm CPU: 0 PID: 33 Comm: kworker/0:1 Tainted: G W E 4.12.0-rc5+ #1455 Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc1-00234-g22fa70a-dirty 06/26/2017 Workqueue: events deferred_probe_work_func Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-05soc: imx: gpcv2: fix regulator deferred probeStefan Agner1-7/+8
If a regulator requests a deferred probe, the power domain gets initialized twice. This leads to a list double add (without list debugging the kernel hangs due to the double add later): WARNING: CPU: 0 PID: 19 at lib/list_debug.c:31 __list_add_valid+0xbc/0xc4 list_add double add: new=c1229754, prev=c12383b4, next=c1229754. Initialize the power domain after we get the regulator. Also do not print an error in case the regulator defers probing. Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver") Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-02soc: qcom: GLINK SSR notifierBjorn Andersson3-0/+174
This driver register as a subsystem restart notifier and will send out notifications to remote processors that has opened the "glink_ssr" GLINK channel. This mechanism is used to signal any GLINK participants that a 3rd party is gone and that the communication state has to be reset; i.e. that read and write pointers of the GLINK FIFOs are stale. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-02soc: mtk-pmic-wrap: make of_device_ids const.Arvind Yadav1-3/+3
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31soc/tegra: Fix bad of_node_put() in powergate initTuomas Tynkkynen1-3/+1
The for_each_child_of_node macro itself maintains the correct reference count of the nodes so the explicit of_node_put() call causes a warning: [ 0.098960] OF: ERROR: Bad of_node_put() on /pmc@7000e400/powergates/xusba [ 0.098981] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.3 #1-NixOS [ 0.098996] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT) [ 0.099011] Call trace: [ 0.099034] [<ffff00000808a048>] dump_backtrace+0x0/0x2a0 [ 0.099051] [<ffff00000808a30c>] show_stack+0x24/0x30 [ 0.099069] [<ffff0000084a6494>] dump_stack+0x9c/0xc0 [ 0.099090] [<ffff000008992214>] of_node_release+0xa4/0xa8 [ 0.099107] [<ffff0000084a9270>] kobject_put+0x90/0x1f8 [ 0.099124] [<ffff0000089914ac>] of_node_put+0x24/0x30 [ 0.099140] [<ffff00000898cec4>] __of_get_next_child+0x4c/0x70 [ 0.099155] [<ffff00000898cf28>] of_get_next_child+0x40/0x68 [ 0.099173] [<ffff0000090a099c>] tegra_pmc_early_init+0x4e8/0x5ac [ 0.099189] [<ffff00000808399c>] do_one_initcall+0x5c/0x168 [ 0.099206] [<ffff000009050c98>] kernel_init_freeable+0xd4/0x240 [ 0.099224] [<ffff000008b2d658>] kernel_init+0x18/0x108 [ 0.099238] [<ffff0000080836c0>] ret_from_fork+0x10/0x50 (It's not very apparent from the OF documentation that of_node_put() is not needed; the macro itself has no docstring and of_get_next_child() used in the implementation begins with "Returns a node pointer with refcount incremented" but then only at the very end of the docstring the crucial part "Decrements the refcount of prev" is mentioned.) Fixes: a38045121bf42 ("soc/tegra: pmc: Add generic PM domain support") Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-07-28soc: Add Amlogic SoC Information driverNeil Armstrong5-0/+192
Amlogic SoCs have a SoC information register for SoC type, package type and revision information. This patchs adds support for this register decoding and exposing with the SoC bus infrastructure. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-07-27soc: renesas: rcar-rst: Add support for R-Car D3Geert Uytterhoeven2-1/+2
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: devicetree@vger.kernel.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 17:36:38 +0000