summaryrefslogtreecommitdiffstats
path: root/drivers/soc
AgeCommit message (Collapse)AuthorFilesLines
2021-05-25soc: qcom: rpmhpd: Add SC8180XBjorn Andersson1-0/+21
Add the power domains exposed by RPMH in the Qualcomm SC8180X platform. Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210120225037.1611353-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25soc: qcom: smd-rpm: Add SM6125 compatibleMartin Botka1-0/+1
Add a compatible for SM6125 Signed-off-by: Martin Botka <martin.botka@somainline.org> Link: https://lore.kernel.org/r/20210523211556.731976-1-martin.botka@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25soc: qcom: socinfo: Add remaining IPQ6018 family ID-sRobert Marko1-0/+4
ID for IPQ6018 was previously added, but ID-s for rest of the family are missing. So, lets add those based on downstream driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Kathiravan T <kathirav@codeaurora.org> Link: https://lore.kernel.org/r/20210517120034.3975027-1-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25soc: qcom: socinfo: Add missing SoC ID for SM6125Martin Botka1-0/+1
Add SM6125 SoC ID to the soc_id struct Signed-off-by: Martin Botka <martin.botka@somainline.org> Link: https://lore.kernel.org/r/20210523212038.736445-2-martin.botka@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-23soc: imx: gpcv2: add support for optional resetsLucas Stach1-0/+14
Normally the reset for the devices inside the power domain is triggered automatically from the PGC in the power-up sequencing, however on i.MX8MM this doesn't work for the GPU power domains. Add support for triggering the reset explicitly during the power up sequencing. Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23soc: imx: gpcv2: allow domains without power-sequence controlLucas Stach1-40/+49
Some of the PGC domains only control the handshake with the ADB400 and don't have any power sequence controls. Make such domains work by allowing the pxx and map bits to be empty and skip all actions using those controls. Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23soc: imx: gpcv2: add runtime PM support for power-domainsLucas Stach1-1/+17
This allows to nest domains into other power domains and have the parent domain powered up/down as required by the child domains. Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23soc: imx: gpcv2: wait for ADB400 handshakeLucas Stach1-8/+39
New reference manuals show that there is actually a status bit for the ADB400 handshake. Add a poll loop to wait for the ADB400 to acknowledge our request. [Peng Fan: i.MX8MM has blk ctl module, the handshake can only finish after setting blk ctl. The blk ctl driver will set the bus clk bit and the handshake will finish there. we just add a delay and suppose the handshake will finish after that.] Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23soc: imx: gpcv2: split power up and power down sequence controlLucas Stach1-55/+86
The current mixed function to control both power up and power down sequences is very hard to follow and already contains some sequence errors like triggering the ADB400 handshake at the wrong time due to this. Split the function into two, which results in slightly more code, but is way easier to get right. Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23soc: imx: gpcv2: switch to clk_bulk_* APILucas Stach1-48/+12
Use clk_bulk API to simplify the code a bit. Also add some error checking to the clk_prepare_enable calls. Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23soc: imx: gpcv2: move domain mapping to domain driver probeLucas Stach1-9/+13
As long as the power domain driver is active we want power control over the domain (which is what the mapping bit requests), so there is no point in whacking it for every power control action, simply set the bit in driver probe and clear it when the driver is removed. Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23soc: imx: gpcv2: move to more ideomatic error handling in probeLucas Stach1-4/+9
Switch to "goto out..." error handling in domain driver probe to avoid repeating all the error paths. Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-13ARM: imx: Initialize SoC ID on i.MX50Jonathan Neuschäfer1-0/+3
As on i.MX51 and i.MX53, initialize the SoC ID based on the SoC compatible string of the board. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-12soc: mediatek: add missing MODULE_DEVICE_TABLEZou Wei1-0/+1
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1620705350-104687-1-git-send-email-zou_wei@huawei.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-05-11soc: rockchip: power-domain: add rk3568 powerdomainsElaine Zhang1-0/+31
Add power-domains found on rk3568 socs. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210417112952.8516-16-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-05-10soc: bcm: brcmstb: remove unused variable 'brcmstb_machine_match'Jiapeng Chong1-5/+0
Fix the following clang warning: drivers/soc/bcm/brcmstb/common.c:17:34: warning: unused variable 'brcmstb_machine_match' [-Wunused-const-variable]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-05-10soc: rockchip: power-domain: Add a meaningful power domain nameElaine Zhang1-107/+114
Add the power domains names to the power domain info struct so we have meaningful name for every power domain. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210417112952.8516-10-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-05-01Merge tag 'iommu-updates-v5.13' of ↵Linus Torvalds1-52/+3
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Big cleanup of almost unsused parts of the IOMMU API by Christoph Hellwig. This mostly affects the Freescale PAMU driver. - New IOMMU driver for Unisoc SOCs - ARM SMMU Updates from Will: - Drop vestigial PREFETCH_ADDR support (SMMUv3) - Elide TLB sync logic for empty gather (SMMUv3) - Fix "Service Failure Mode" handling (SMMUv3) - New Qualcomm compatible string (SMMUv2) - Removal of the AMD IOMMU performance counter writeable check on AMD. It caused long boot delays on some machines and is only needed to work around an errata on some older (possibly pre-production) chips. If someone is still hit by this hardware issue anyway the performance counters will just return 0. - Support for targeted invalidations in the AMD IOMMU driver. Before that the driver only invalidated a single 4k page or the whole IO/TLB for an address space. This has been extended now and is mostly useful for emulated AMD IOMMUs. - Several fixes for the Shared Virtual Memory support in the Intel VT-d driver - Mediatek drivers can now be built as modules - Re-introduction of the forcedac boot option which got lost when converting the Intel VT-d driver to the common dma-iommu implementation. - Extension of the IOMMU device registration interface and support iommu_ops to be const again when drivers are built as modules. * tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits) iommu: Streamline registration interface iommu: Statically set module owner iommu/mediatek-v1: Add error handle for mtk_iommu_probe iommu/mediatek-v1: Avoid build fail when build as module iommu/mediatek: Always enable the clk on resume iommu/fsl-pamu: Fix uninitialized variable warning iommu/vt-d: Force to flush iotlb before creating superpage iommu/amd: Put newline after closing bracket in warning iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()' iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86 iommu/amd: Remove performance counter pre-initialization test Revert "iommu/amd: Fix performance counter initialization" iommu/amd: Remove duplicate check of devid iommu/exynos: Remove unneeded local variable initialization iommu/amd: Page-specific invalidations for more than one page iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown iommu/vt-d: Invalidate PASID cache when root/context entry changed iommu/vt-d: Remove WO permissions on second-level paging entries iommu/vt-d: Report the right page fault address ...
2021-04-30Merge tag 'pinctrl-v5.13-1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "There is a lot going on! Core changes: - A semantic change to handle pinmux and pinconf in explicit order while up until now we depended on the semantic order in the device tree. The device tree is a functional programming language and does not imply any order, so the right thing is for the pin control core to provide these semantics. - Add a new pinmux-select debugfs file which makes it possible to go in and select functions for a pin manually (iteratively, at the prompt) for debugging purposes. - Fixes to gpio regmap handling for a new pin control driver making use of regmap-gpio. - Use octal permissions on debugfs files. New drivers: - A massive rewrite of the former custom pin control driver for MIPS Broadcom devices to instead use the pin control subsystem. New pin control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368, BCM63268 and BCM6318 SoC variants are implemented. - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are supported. - Support for the Rockchip RK3568/RK3566 pin controller. - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000. - Support for Mediatek MTK8195. - Add a new Xilinx ZynqMP pin control driver. Driver improvements and non-urgent fixes: - Modularization and improvements of the Rockchip drivers. - Some new pins added to the description of new Renesas SoCs. - Clarifications of the GPIO base calculation in the Intel driver. - Fix the function names for the MPP54 and MPP55 pins in the Armada CP110 pin controller. - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350. - Support for ACPI probing of the Qualcomm SC8180x. - Fix interrupt clear status on rockchip - Fix some missing pins on the Ingenic JZ4770, some semantic fixes for the behaviour of the Ingenic pin controller. Add DMIC pins for JZ4780, X1000, X1500 and X1830. - A slew of janitorial like of_node_put() calls" * tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: Add Xilinx ZynqMP pinctrl driver support firmware: xilinx: Add pinctrl support pinctrl: rockchip: do coding style for mux route struct pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param pinctrl: Introduce MODE group in enum pin_config_param pinctrl: Keep enum pin_config_param ordered by name dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver pinctrl: core: Fix kernel doc string for pin_get_name() pinctrl: mediatek: use spin lock in mtk_rmw pinctrl: add drive for I2C related pins on MT8195 pinctrl: add pinctrl driver on mt8195 dt-bindings: pinctrl: mt8195: add pinctrl file and binding document pinctrl: Ingenic: Add pinctrl driver for X2000. pinctrl: Ingenic: Add pinctrl driver for JZ4775. pinctrl: Ingenic: Add pinctrl driver for JZ4755. pinctrl: Ingenic: Add pinctrl driver for JZ4750. pinctrl: Ingenic: Add pinctrl driver for JZ4730. dt-bindings: pinctrl: Add bindings for new Ingenic SoCs. pinctrl: Ingenic: Reformat the code. pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs. ...
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds41-463/+1141
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
2021-04-26Merge tag 'arm-soc-5.13' of ↵Linus Torvalds1-4/+12
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "Almost all SoC code changes this time are for the TI OMAP platform, which continues its decade-long quest to move from describing a complex SoC in code to device tree. Aside from this, the Uniphier platform has a new maintainer and some platforms have minor bugfixes and cleanups that were not urgent enough for v5.12" * tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) MAINTAINERS: Update ARM/UniPhier SoCs maintainers and status mailmap: Update email address for Nicolas Saenz MAINTAINERS: Update BCM2711/BCM2335 maintainer's mail ARM: exynos: correct kernel doc in platsmp ARM: hisi: use the correct HiSilicon copyright ARM: ux500: make ux500_cpu_die static ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950 ARM: OMAP1: fix incorrect kernel-doc comment syntax in file ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock ARM: at91: pm: Move prototypes to mutually included header ARM: OMAP2+: use true and false for bool variable ARM: OMAP2+: add missing call to of_node_put() ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE ARM: imx: Kconfig: Fix typo in help ARM: mach-imx: Fix a spelling in the file pm-imx5.c bus: ti-sysc: Warn about old dtb for dra7 and omap4/5 ARM: OMAP2+: Stop building legacy code for dra7 and omap4/5 ARM: OMAP2+: Drop legacy platform data for omap5 hwmod ARM: OMAP2+: Drop legacy platform data for omap5 l3 ...
2021-04-23soc: aspeed: fix a ternary sign expansion bugDan Carpenter1-1/+3
The intent here was to return negative error codes but it actually returns positive values. The problem is that type promotion with ternary operations is quite complicated. "ret" is an int. "copied" is a u32. And the snoop_file_read() function returns long. What happens is that "ret" is cast to u32 and becomes positive then it's cast to long and it's still positive. Fix this by removing the ternary so that "ret" is type promoted directly to long. Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Patrick Venture <venture@google.com> Link: https://lore.kernel.org/r/YIE90PSXsMTa2Y8n@mwanda Link: https://lore.kernel.org/r/20210423000919.1249474-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-22pinctrl: Introduce MODE group in enum pin_config_paramAndy Shevchenko1-2/+2
Better to have a MODE group of settings to keep them together when ordered alphabetically. Hence, rename PIN_CONFIG_LOW_POWER_MODE to PIN_CONFIG_MODE_LOW_POWER. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210412140741.39946-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-18Merge tag 'arm-fixes-5.12-3' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Another smaller set of fixes for three of the Arm platforms: TI OMAP: Fix swapped mmc device order also for omap3 that got changed with the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases should be board specific, all the mmc device instances are all there in the SoC, and we do probe them by default so that PM runtime can idle the devices if left enabled from the bootloader. Qualcomm Snapdragon: This bypasses the recently introduced interconnect handling in the GENI (serial engine) driver when running off ACPI, as this causes the GENI probe to fail and the Lenovo Yoga C630 to boot without keyboard and touchpad. Allwinner: One 32kHz clock fix for the beelink gs1, a CD polarity fix for the SoPine, some MAINTAINERS maintainance, and a clk / reset switch to our headers" * tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference MAINTAINERS: Match on allwinner keyword MAINTAINERS: Add our new mailing-list arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices ARM: OMAP2+: Fix uninitialized sr_inst ARM: dts: Fix swapped mmc order for omap3 ARM: OMAP2+: Fix warning for omap_init_time_of() soc: qcom: geni: shield geni_icc_get() for ACPI boot
2021-04-16Merge branches 'iommu/fixes', 'arm/mediatek', 'arm/smmu', 'arm/exynos', ↵Joerg Roedel1-52/+3
'unisoc', 'x86/vt-d', 'x86/amd' and 'core' into next
2021-04-13Merge tag 'soc-fsl-next-v5.13' of ↵Arnd Bergmann12-105/+125
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers * tag 'soc-fsl-next-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: enable acpi support in RCPM driver Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" tty: serial: ucc_uart: replace qe_io{read,write}* wrappers by generic io{read,write}* soc: fsl: qe: replace qe_io{read,write}* wrappers by generic io{read,write}* soc: fsl: guts: fix comment syntax in file soc: fsl: guts: remove unneeded semicolon soc: fsl: qe: Use DEFINE_SPINLOCK() for spinlock soc: fsl: qbman: Delete useless kfree code soc: fsl: qbman: Ensure device cleanup is run for kexec Link: https://lore.kernel.org/r/20210409205719.27927-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09Merge tag 'qcom-drivers-for-5.13-2' of ↵Arnd Bergmann3-6/+28
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers More Qualcomm driver updates for 5.13 This improves the Qualcomm SCM driver logic related to detecting the calling convention, in particular on SC7180, and fixes a few small issues in the same. It introduces additonal sanity checks of the size of loaded segments in the MDT loader and adds a missing error in the return path of pdr_register_listener(). It makes it possible to specify the OEM specific firmware path in the wcn36xx control (and WiFi) driver. Lastly it adds a missing path specifier in the MAINTAINERS' entry and fixes a bunch of kerneldoc issues in various drivers. * tag 'qcom-drivers-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool soc: qcom: wcnss_ctrl: Allow reading firmware-name from DT soc: qcom: wcnss_ctrl: Introduce local variable "dev" dt-bindings: soc: qcom: wcnss: Add firmware-name property soc: qcom: address kernel-doc warnings MAINTAINERS: add another entry for ARM/QUALCOMM SUPPORT Link: https://lore.kernel.org/r/20210409162001.775851-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09Merge tag 'aspeed-5.13-lpc' of ↵Arnd Bergmann2-14/+29
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/drivers ASPEED LPC updates for 5.13 These patches fix the ASPEED LPC bindings and LPC-related device drivers so in the future the KCS driver can properly use the hardware. * tag 'aspeed-5.13-lpc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning Link: https://lore.kernel.org/r/CACPK8Xcb12LsVr7CUaXXjQskKbVjb7x+jgueG1Hik-kBPWtDSg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09soc: aspeed: Adapt to new LPC device tree layoutChia-Wei, Wang2-14/+29
Add check against LPC device v2 compatible string to ensure that the fixed device tree layout is adopted. The LPC register offsets are also fixed accordingly. Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210319062752.145730-5-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08soc: fsl: enable acpi support in RCPM driverPeng Ma1-2/+22
This patch enables ACPI support in RCPM driver. Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-08Merge tag 'v5.12-next-soc.2' of ↵Arnd Bergmann2-0/+46
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers MT8167: - add support for mmsys subsystem * tag 'v5.12-next-soc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: mmsys: Add support for MT8167 SoC dt-bindings: mediatek: mmsys: add mt8167 binding Link: https://lore.kernel.org/r/14104322-3a6c-e8eb-cd21-a5343a81aa0f@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'qcom-drivers-for-5.13' of ↵Arnd Bergmann6-48/+103
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for 5.13 This introduces SC7280 and SM8350 support in the RPMH power-domain driver, SC7280 support to the LLCC driver, SC7280 support tot he AOSS QMP driver, cleanups to the RPMH driver and a few smaller fixes to the SMEM, QMI and EBI2 drivers. * tag 'qcom-drivers-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: bus: qcom: Put child node before return dt-bindings: firmware: scm: Add sc7280 support soc: qcom: rpmh-rsc: Fold WARN_ON() into if condition soc: qcom: rpmh-rsc: Loop over fewer bits in irq handler soc: qcom: rpmh-rsc: Remove tcs_is_free() API soc: qcom: smem: Update max processor count soc: qcom: aoss: Add AOSS QMP support for SC7280 dt-bindings: soc: qcom: aoss: Add SC7280 compatible soc: qcom: llcc: Add configuration data for SC7280 dt-bindings: arm: msm: Add LLCC for SC7280 soc: qcom: Fix typos in the file qmi_encdec.c soc: qcom: rpmhpd: Add sc7280 powerdomains dt-bindings: power: rpmpd: Add sc7280 to rpmpd binding soc: qcom: rpmhpd: Add SM8350 power domains dt-bindings: power: Add rpm power domain bindings for SM8350 Link: https://lore.kernel.org/r/20210404164951.713045-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08Merge tag 'qcom-drivers-fixes-for-5.12' of ↵Arnd Bergmann1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm fix for 5.12 This bypasses the, recently introduced, interconnect handling in the GENI (serial engine) driver when running off ACPI, as this causes the GENI probe to fail and the Lenovo Yoga C630 to boot without keyboard and touchpad. * tag 'qcom-drivers-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: geni: shield geni_icc_get() for ACPI boot Link: https://lore.kernel.org/r/20210404155604.712236-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-08soc: qcom: mdt_loader: Detect truncated read of segmentsBjorn Andersson1-0/+9
Given that no validation of how much data the firmware loader read in for a given segment truncated segment files would best case result in a hash verification failure, without any indication of what went wrong. Improve this by validating that the firmware loader did return the amount of data requested. Fixes: 445c2410a449 ("soc: qcom: mdt_loader: Use request_firmware_into_buf()") Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20210107232526.716989-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-08soc: qcom: mdt_loader: Validate that p_filesz < p_memszBjorn Andersson1-0/+8
The code validates that segments of p_memsz bytes of a segment will fit in the provided memory region, but does not validate that p_filesz bytes will, which means that an incorrectly crafted ELF header might write beyond the provided memory region. Fixes: 051fb70fd4ea ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5") Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20210107233119.717173-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-07soc: qcom: pdr: Fix error return code in pdr_register_listenerQinglang Miao1-1/+1
Fix to return the error code -EREMOTEIO from pdr_register_listener rather than 0. Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Link: https://lore.kernel.org/r/20201125065034.154217-1-miaoqinglang@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-07Merge tag 'arm-fixes-5.11-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Most of the changes again are devicetree fixes, but there are also five trivial build fixes for issues I found when test building with gcc-11 or when running 'make W=1', and some OMAP platform specific code fixups. Broadcom: - One revert for a Raspberry pi interrupt controller change that caused a regression. TI OMAP: - Remove unused duplicate sha2md5_fck clock node that can race with the OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks - Add aliases for omap4/5 mmc to put the slots back into the right order again - Fix typo for bionic voltage controllers that accidentally use mpu for all instances instead of mpu, core and iva - Fix random hangs for droid4 caused by missing fix from TI Android kernel tree to do a dummy smc call on cpuidle wakeup path NXP i.MX: - Fix a system failure on imx6qdl-phytec-pfla02 board when booting from SD, by adding missing vmmc supply for SD interfaces. - Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2 definition. Marvell mvebu: - Fix storm interrupt on Turris Omnia - Enable hardware buffer management as it should be ... and build fixes for PXA, Freescale, Marvell, OMAP1 and Keystone" * tag 'arm-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin ARM: dts: turris-omnia: fix hardware buffer management Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts" ARM: mvebu: avoid clang -Wtautological-constant warning ARM: pxa: mainstone: avoid -Woverride-init warning ARM: omap1: fix building with clang IAS soc/fsl: qbman: fix conflicting alignment attributes ARM: keystone: fix integer overflow warning ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0 ARM: OMAP4: PM: update ROM return address for OSWR and OFF ARM: OMAP4: Fix PMIC voltage domains for bionic ARM: dts: Fix moving mmc devices with aliases for omap4 & 5 ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"
2021-04-07iommu/fsl_pamu: enable the liodn when attaching a deviceChristoph Hellwig1-11/+0
Instead of a separate call to enable all devices from the list, just enable the liodn once the device is attached to the iommu domain. This also remove the DOMAIN_ATTR_FSL_PAMU_ENABLE iommu_attr. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-11-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu/fsl_pamu: replace DOMAIN_ATTR_FSL_PAMU_STASH with a direct callChristoph Hellwig1-15/+3
Add a fsl_pamu_configure_l1_stash API that qman_portal can call directly instead of indirecting through the iommu attr API. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-8-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu/fsl_pamu: remove ->domain_window_enableChristoph Hellwig1-7/+0
The only thing that fsl_pamu_window_enable does for the current caller is to fill in the prot value in the only dma_window structure, and to propagate a few values from the iommu_domain_geometry struture into the dma_window. Remove the dma_window entirely, hardcode the prot value and otherwise use the iommu_domain_geometry structure instead. Remove the now unused ->domain_window_enable iommu method. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-7-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu/fsl_pamu: remove support for multiple windowsChristoph Hellwig1-7/+0
The only domains allocated forces use of a single window. Remove all the code related to multiple window support, as well as the need for qman_portal to force a single window. Remove the now unused DOMAIN_ATTR_WINDOWS iommu_attr. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-6-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu/fsl_pamu: remove support for setting DOMAIN_ATTR_GEOMETRYChristoph Hellwig1-12/+0
The default geometry is the same as the one set by qman_port given that FSL_PAMU depends on having 64-bit physical and thus DMA addresses. Remove the support to update the geometry and remove the now pointless geom_size field. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20210401155256.298656-4-hch@lst.de Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-06soc: fsl: qe: replace qe_io{read,write}* wrappers by generic io{read,write}*Christophe Leroy6-97/+97
Commit 6ac9b61786cc ("soc: fsl: qe: introduce qe_io{read,write}* wrappers") added specific I/O accessors for qe because at that time ioread/iowrite functions were sub-optimal on powerpc/32 compared to the architecture specific in_/out_ IO accessors. But as ioread/iowrite accessors are now equivalent since commit 894fa235eb4c ("powerpc: inline iomap accessors"), use them in order to allow removal of the qe specific ones. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-06soc: fsl: guts: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./drivers/soc/fsl/guts.c:120:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-06soc: fsl: qe: Use DEFINE_SPINLOCK() for spinlockZheng Yongjun1-2/+1
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-06soc: fsl: qbman: Delete useless kfree codeZheng Yongjun1-1/+0
The parameter of kfree function is NULL, so kfree code is useless, delete it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-06soc: fsl: qbman: Ensure device cleanup is run for kexecRoy Pledge2-2/+4
Make sure that the QBMan device cleanup routines are executed when the device was previously initialized. This is needed for kexec since the device will keep it's state from the previous kernel that was executing. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-04-06soc: mediatek: mmsys: Add support for MT8167 SoCFabien Parent2-0/+46
Add routing table for DSI on MT8167 SoC. The registers are mostly incompatible with the current defines, so new one for MT8167 are added. Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20210405200354.2194930-2-fparent@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-04-05soc: qcom: wcnss_ctrl: Allow reading firmware-name from DTBjorn Andersson1-3/+7
The WLAN NV firmware blob differs between platforms, and possibly devices, so add support in the wcnss_ctrl driver for reading the path of this file from DT in order to allow these files to live in a generic file system (or linux-firmware). The new property is optional and the code falls back to the old filename if the property isn't specified. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Aníbal Limón <anibal.limon@linaro.org> Link: https://lore.kernel.org/r/20210312003318.3273536-5-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-05soc: qcom: wcnss_ctrl: Introduce local variable "dev"Bjorn Andersson1-4/+5
Introduce a local variable to carry the struct device *, to reduce the line lengths in the next patch. Tested-by: Aníbal Limón <anibal.limon@linaro.org> Link: https://lore.kernel.org/r/20210312003318.3273536-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-05 01:42:03 +0000