summaryrefslogtreecommitdiffstats
path: root/drivers/soc
AgeCommit message (Collapse)AuthorFilesLines
2022-08-08Merge tag 'pm-5.20-rc1-2' of ↵Linus Torvalds2-18/+35
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are ARM cpufreq updates and operating performance points (OPP) updates plus one cpuidle update adding a new trace point. Specifics: - Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang). - Minor cleanups and support for new boards for Qcom cpufreq drivers (Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang). - Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar). - Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh Kumar). - Add dev_pm_opp_set_config() and friends and migrate other users and helpers to using them (Viresh Kumar). - Add support for multiple clocks for a device (Viresh Kumar and Krzysztof Kozlowski). - Configure resources before adding OPP table for Venus (Stanimir Varbanov). - Keep reference count up for opp->np and opp_table->np while they are still in use (Liang He). - Minor OPP cleanups (Viresh Kumar and Yang Li). - Add a trace event for cpuidle to track missed (too deep or too shallow) wakeups (Kajetan Puchalski)" * tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits) cpuidle: Add cpu_idle_miss trace event venus: pm_helpers: Fix warning in OPP during probe OPP: Don't drop opp->np reference while it is still in use OPP: Don't drop opp_table->np reference while it is still in use cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible dt-bindings: opp: Add msm8939 to the compatible list dt-bindings: opp: Add missing compat devices dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks cpufreq: Change order of online() CB and policy->cpus modification cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call cpufreq: qcom-hw: Disable LMH irq when disabling policy cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init() OPP: Remove dev{m}_pm_opp_of_add_table_noclk() PM / devfreq: tegra30: Register config_clks helper OPP: Allow config_clks helper for single clk case OPP: Provide a simple implementation to configure multiple clocks OPP: Assert clk_count == 1 for single clk helpers ...
2022-08-05Merge tag 'asm-generic-6.0' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are three independent sets of changes: - Sai Prakash Ranjan adds tracing support to the asm-generic version of the MMIO accessors, which is intended to help understand problems with device drivers and has been part of Qualcomm's vendor kernels for many years - A patch from Sebastian Siewior to rework the handling of IRQ stacks in softirqs across architectures, which is needed for enabling PREEMPT_RT - The last patch to remove the CONFIG_VIRT_TO_BUS option and some of the code behind that, after the last users of this old interface made it in through the netdev, scsi, media and staging trees" * tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: uapi: asm-generic: fcntl: Fix typo 'the the' in comment arch/*/: remove CONFIG_VIRT_TO_BUS soc: qcom: geni: Disable MMIO tracing for GENI SE serial: qcom_geni_serial: Disable MMIO tracing for geni serial asm-generic/io: Add logging support for MMIO accessors KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM lib: Add register read/write tracing support drm/meson: Fix overflow implicit truncation warnings irqchip/tegra: Fix overflow implicit truncation warnings coresight: etm4x: Use asm-generic IO memory barriers arm64: io: Use asm-generic high level MMIO accessors arch/*: Disable softirq stacks on PREEMPT_RT.
2022-08-04Merge tag 'spdx-6.0-rc1' of ↵Linus Torvalds1-9/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-08-03Merge tag 'opp-updates-5.20-rc1' of ↵Rafael J. Wysocki2-18/+35
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) updates for 5.20-rc1 from Viresh Kumar: "- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh Kumar). - Add dev_pm_opp_set_config() and friends and migrate other users/helpers to using them (Viresh Kumar). - Add support for multiple clocks for a device (Viresh Kumar and Krzysztof Kozlowski). - Configure resources before adding OPP table for Venus (Stanimir Varbanov). - Keep reference count up for opp->np and opp_table->np while they are still in use (Liang He). - Minor cleanups (Viresh Kumar and Yang Li)." * tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (43 commits) venus: pm_helpers: Fix warning in OPP during probe OPP: Don't drop opp->np reference while it is still in use OPP: Don't drop opp_table->np reference while it is still in use OPP: Remove dev{m}_pm_opp_of_add_table_noclk() PM / devfreq: tegra30: Register config_clks helper OPP: Allow config_clks helper for single clk case OPP: Provide a simple implementation to configure multiple clocks OPP: Assert clk_count == 1 for single clk helpers OPP: Add key specific assert() method to key finding helpers OPP: Compare bandwidths for all paths in _opp_compare_key() OPP: Allow multiple clocks for a device dt-bindings: opp: accept array of frequencies OPP: Make dev_pm_opp_set_opp() independent of frequency OPP: Reuse _opp_compare_key() in _opp_add_static_v2() OPP: Remove rate_not_available parameter to _opp_add() OPP: Use consistent names for OPP table instances OPP: Use generic key finding helpers for bandwidth key OPP: Use generic key finding helpers for level key OPP: Add generic key finding helpers and use them for freq APIs OPP: Remove dev_pm_opp_find_freq_ceil_by_volt() ...
2022-08-02Merge tag 'arm-drivers-6.0' of ↵Linus Torvalds48-309/+3707
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC drivers from Arnd Bergmann: "The SoC driver updates contain changes to improve support for additional SoC variants, as well as cleanups an minor bugfixes in a number of existing drivers. Notable updates this time include: - Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers - Updates for interconnect drivers on Qualcomm Snapdragon - A new driver support for NMI interrupts on Fujitsu A64fx - A rework of Broadcom BCMBCA Kconfig dependencies - Improved support for BCM2711 (Raspberry Pi 4) power management to allow the use of the V3D GPU - Cleanups to the NXP guts driver - Arm SCMI firmware driver updates to add tracing support, and use the firmware interfaces for system power control and for power capping" * tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits) soc: a64fx-diag: disable modular build dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config ARM: mach-qcom: Add support for MSM8909 dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method soc: qcom: spm: Add CPU data for MSM8909 dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible soc: qcom: rpmpd: Add compatible for MSM8909 dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains soc: qcom: smd-rpm: Add compatible for MSM8909 dt-bindings: soc: qcom: smd-rpm: Add MSM8909 soc: qcom: icc-bwmon: Remove unnecessary print function dev_err() soc: fujitsu: Add A64FX diagnostic interrupt driver soc: qcom: socinfo: Fix the id of SA8540P SoC soc: qcom: Make QCOM_RPMPD depend on PM tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA ...
2022-08-02Merge tag 'arm-soc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-3/+2
Pull ARM SoC updates from Arnd Bergmann: "The updates for arch/arm/mach-* platform code this time are mainly minor cleanups. Most notably, the DaVinci DM644x/DM646x SoC support gets removed. This was also scheduled for later removal early next year, but Linus Walleij asked for having them removed earlier to avoid problems for the GPIO subsystem" * tag 'arm-soc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) ARM: at91: setup outer cache .write_sec() callback if needed ARM: at91: add sam_linux_is_optee_available() function ARM: Marvell: Update PCIe fixup ARM: bcmbca: Include full family name in Kconfig ARM: bcm: NSP: Removed forced thermal selection ARM: debug: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA arm: bcmbca: Add BCMBCA sub platforms arm: bcmbca: Move BCM63138 ARCH_BCM_63XX to ARCH_BCMBCA MAINTAINERS: Move BCM63138 to bcmbca arch entry ARM: shmobile: rcar-gen2: Increase refcount for new reference ARM: davinci: Delete DM646x board files ARM: davinci: Delete DM644x board files firmware: xilinx: Add TF_A_PM_REGISTER_SGI SMC call cpufreq: zynq: Fix refcount leak in zynq_get_revision ARM: OMAP2+: Kconfig: Fix indentation ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init ARM: OMAP2+: pdata-quirks: Fix refcount leak bug ARM: OMAP2+: display: Fix refcount leak bug ARM: OMAP2+: Fix refcount leak in omapdss_init_of ARM: imx25: support silicon revision 1.2 ...
2022-07-21Merge tag 'qcom-drivers-for-5.20-2' of ↵Arnd Bergmann6-4/+20
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers More Qualcomm driver changes for v5.20 This adds support for booting secondary cores, SPM, SMD-RPM and RPM power-domain support for the MSM8909 platform. It drops an unnecessary print in icc-bwmon, corrects SA8540P entries in socinfo and a Kconfig build dependency for QCOM_RPMPD. Lastly it continues to clean up up the Devicetree bindings for the Qualcomm drivers. * tag 'qcom-drivers-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config ARM: mach-qcom: Add support for MSM8909 dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method soc: qcom: spm: Add CPU data for MSM8909 dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible soc: qcom: rpmpd: Add compatible for MSM8909 dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains soc: qcom: smd-rpm: Add compatible for MSM8909 dt-bindings: soc: qcom: smd-rpm: Add MSM8909 soc: qcom: icc-bwmon: Remove unnecessary print function dev_err() soc: qcom: socinfo: Fix the id of SA8540P SoC soc: qcom: Make QCOM_RPMPD depend on PM Link: https://lore.kernel.org/r/20220720230648.2113609-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20soc: a64fx-diag: disable modular buildArnd Bergmann1-1/+1
The NMI infrastructure cannot currently be used in loadable modules: ERROR: modpost: "free_nmi" [drivers/soc/fujitsu/a64fx-diag.ko] undefined! ERROR: modpost: "request_nmi" [drivers/soc/fujitsu/a64fx-diag.ko] undefined! ERROR: modpost: "enable_nmi" [drivers/soc/fujitsu/a64fx-diag.ko] undefined! Disable this for now to make allmodconfig build again. We may revisit this and export those symbols instead in the future. Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-18soc: qcom: spm: Add CPU data for MSM8909Stephan Gerhold1-0/+14
Given the lack of public documentation for the SPM, the configuration data is taken without modification from Qualcomm's msm-3.10 release [1]. It is pretty much identical to the one for MSM8916, except that 0x3B is missing in the sequence for standalone power collapse for some reason. [1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.3-00910-8x09.0/arch/arm/boot/dts/qcom/msm8909-pm8909-pm.dtsi Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220705143523.3390944-7-stephan.gerhold@kernkonzept.com
2022-07-18soc: qcom: rpmpd: Add compatible for MSM8909Stephan Gerhold1-0/+1
MSM8909 has the same power domains as MSM8916, so just define another compatible for the existing definition. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220705143523.3390944-5-stephan.gerhold@kernkonzept.com
2022-07-18soc: qcom: smd-rpm: Add compatible for MSM8909Stephan Gerhold1-0/+1
Add the new "qcom,rpm-msm8909" compatible to the driver so the interface to the Resource Power Manager (RPM) is initialized correctly on MSM8909. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220705143523.3390944-3-stephan.gerhold@kernkonzept.com
2022-07-18soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()Yang Li1-3/+1
Eliminate the follow coccicheck warning: ./drivers/soc/qcom/icc-bwmon.c:349:2-9: line 349 is redundant because platform_get_irq() already prints an error Fixes: b9c2ae6cac40 ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220714075532.104665-1-yang.lee@linux.alibaba.com
2022-07-18soc: fujitsu: Add A64FX diagnostic interrupt driverHitomi Hasegawa5-0/+175
Register the NMI/IRQ corresponding to the A64FX's device definition dedicated to diagnostic interrupts, so that when this interrupt is sent using the BMC, it causes a panic. This can be used to obtain a kernel dump. Signed-off-by: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Link: https://lore.kernel.org/r/20220520074119.3574753-2-hasegawa-hitomi@fujitsu.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-16soc: qcom: socinfo: Fix the id of SA8540P SoCParikshit Pareek1-1/+2
Change the id of SA8540P to its correct value, i.e., 461. Also, map the id 460 to its correct values, i.e. SA8295P. Fixes: 76ee15ae1b13 ("soc: qcom: socinfo: Add some more PMICs and SoCs") Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com> Reviewed-by: Eric Chanudet <echanude@redhat.com> Tested-by: Eric Chanudet <echanude@redhat.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220711083957.12091-1-quic_ppareek@quicinc.com
2022-07-16soc: qcom: Make QCOM_RPMPD depend on PMKonrad Dybcio1-0/+1
QCOM_RPMPD requires PM_GENERIC_DOMAINS/_OF, which in turns requires CONFIG_PM. I forgot about the latter in my earlier patch (it's still in -next as of the time of committing, hence no Fixes: tag). Fix it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220707212158.32684-1-konrad.dybcio@somainline.org
2022-07-12Merge tag 'qcom-drivers-for-5.20' of ↵Arnd Bergmann12-16/+467
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.20 This introduces a new driver that requests interconnect bandwidth based on throughput measurements of the bwmon hardware blocks found associated with, among other things, the CPU subsystem on many Qualcomm platforms. It introduces support for the SCM wrapper driver to vote for interconnect bandwidth for operations that needs bandwidth to the crypto engine. This ensures both performance and guards against issues caused by lacking votes for this path. The socinfo driver gains knowledge about the SC7180P SoC. It contains a range of fixes for spelling mistakes, refcount leaks in various drivers and removes some redundant code from the apr remove path. The SCM DT bindings are updated to declare support for QCS404, SM6125 and SDX65. The command db driver has a strncpy() converted to strscpy_pad() and then back again with proper documentation to why this was the right API. * tag 'qcom-drivers-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: icc-bwmon: Add bandwidth monitoring driver dt-bindings: interconnect: qcom,msm8998-cpu-bwmon: add BWMON device soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OF soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_register soc: qcom: llcc: Fix syntax errors in comments soc: qcom: ocmem: Fix refcount leak in of_get_ocmem dt-bindings: soc: qcom,wcnss: remove unneeded ref for names firmware: qcom_scm: Add bw voting support to the SCM interface dt-bindings: firmware: qcom-scm: Add interconnects property soc: qcom: cmd-db: replace strscpy_pad() with strncpy() dt-bindings: firmware: scm: Add compatible for SDX65 dt-bindings: arm: qcom: switch maintainer to Bjorn soc: qcom: rpmhpd: fix typos in comment soc: qcom: correct kerneldoc soc: qcom: cmd-db: replace strncpy() with strscpy_pad() firmware: qcom_scm-legacy: correct kerneldoc dt-bindings: firmware: document Qualcomm QCS404 and SM6125 SCM soc: qcom: apr: Drop redundant check in .remove() firmware: qcom_scm: drop unexpected word "the" soc: qcom: socinfo: Add an ID for sc7180P Link: https://lore.kernel.org/r/20220712021830.1271398-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-12Merge tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux ↵Arnd Bergmann3-28/+55
into arm/drivers This pull request contains Broadcom SoC drivers updatse for 5.20, please pull the following: - Julia fixes a typo in the Broadcom STB legacy power management code - Liang fixes a device_node reference count leak in the Broadcom STB BIU driver code error path(s) - Nicolas and Stefan provide updates to the BCM2835 power management driver allowing its use on BCM2711 (Raspberry Pi 4) and to enable the use of the V3D GPU driver on such platforms. This is a merge of an immutable branch from Lee Jones' MFD tree - William removes the use of CONFIG_ARCH_BCM_63XX which is removed and replaces the dependencies with CONFIG_ARCH_BCMBCA which is how all of the DSL/PON SoCs from Broadcom are now supported in the upstream kernel. * tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux: tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA ata: ahci_brcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA soc: bcm: bcm2835-power: Bypass power_on/off() calls soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB soc: bcm: bcm2835-power: Resolve ASB register macros soc: bcm: bcm2835-power: Refactor ASB control mfd: bcm2835-pm: Add support for BCM2711 mfd: bcm2835-pm: Use 'reg-names' to get resources soc: bcm: brcmstb: biuctrl: Add missing of_node_put() soc: bcm: brcmstb: pm: pm-arm: fix typo in comment Link: https://lore.kernel.org/r/20220711164451.3542127-6-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-12Merge tag 'imx-drivers-5.20' of ↵Arnd Bergmann3-105/+133
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers change for 5.20: - Update imx8m-blk-ctrl driver to print the name of the power domain, so that the error message becomes more useful. - Update the error messages in gpcv2 driver by printing the reason why a regulator fails to be enabled or disabled. - A series from Michael Walle to convert the guts driver from a platform driver to an core_initcall for getting rid of all those global static variables. - A couple of follow-up fixes on guts driver series. * tag 'imx-drivers-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: fsl: guts: check return value after calling of_iomap() in fsl_guts_get_soc_uid() soc: fsl: guts: fix return value check in fsl_guts_init() soc: imx: imx8m-blk-ctrl: Make error prints useful soc: fsl: guts: add serial_number support soc: fsl: guts: drop platform driver soc: fsl: guts: use of_root instead of own reference soc: fsl: guts: allocate soc_dev_attr on the heap soc: fsl: guts: embed fsl_guts_get_svr() in probe() soc: fsl: guts: remove module_exit() and fsl_guts_remove() soc: fsl: guts: machine variable might be unset soc: imx: gpcv2: print errno for regulator errors Link: https://lore.kernel.org/r/20220709082951.15123-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-12Merge tag 'ti-driver-soc-for-v5.20' of ↵Arnd Bergmann2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/drivers TI Driver updates for v5.20 * pruss: Enable support for AM62, bindings cleanups * wkup_m3_ipc: cosmetic cleanup * tag 'ti-driver-soc-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: soc: ti: pruss: Enable support for PRUSS-M subsystem on K3 AM62x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM62x SoCs dt-bindings: soc: ti: pruss: Re-arrange "compatible" in alphabetic order soc: ti: wkup_m3_ipc: Remove unneeded semicolon Link: https://lore.kernel.org/r/20220708232655.reqjdbib52ejdja4@unadvised Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-12Merge tag 'v5.19-next-soc' of ↵Arnd Bergmann14-148/+2844
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers pmic wrapper: - code style improvements devapc: - add support for MT8186 Smart Voltage Scaling (SVS) - add support for MT8183 and MT8192 MMSYS: - Add more display paths for MT8365 Mutex: - Add common interface for MOD and SOF table - Add support for MDP on MT8183 - Move binding to soc folder - Add support to use CMDQ to enable the mutex, needed by MDP3 Power domains: - Add support for MT6795 * tag 'v5.19-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (29 commits) soc: mediatek: mutex: Simplify with devm_platform_get_and_ioremap_resource() soc: mediatek: pm-domains: Add support for Helio X10 MT6795 dt-bindings: power: Add MediaTek Helio X10 MT6795 power domains soc: mediatek: SVS: Use DEFINE_SIMPLE_DEV_PM_OPS for svs_pm_ops soc: mediatek: mtk-pm-domains: Allow probing vreg supply on two MFGs soc: mediatek: fix missing clk_disable_unprepare() on err in svs_resume() soc: mediatek: mutex: Use DDP_COMPONENT_DITHER0 mod index for MT8365 soc: mediatek: mutex: add functions that operate registers by CMDQ dt-bindings: soc: mediatek: add gce-client-reg for MUTEX dt-bindings: soc: mediatek: move out common module from display folder soc: mediatek: mutex: add 8183 MUTEX MOD settings for MDP soc: mediatek: mutex: add common interface for modules setting soc: mediatek: pm-domains: Add support always on flag soc: mediatek: mt8365-mmsys: add DPI/HDMI display path soc: mediatek: mutex: add MT8365 support soc: mediatek: SVS: add mt8192 SVS GPU driver dt-bindings: soc: mediatek: add mt8192 svs dt-bindings soc: mediatek: SVS: add debug commands soc: mediatek: SVS: add monitor mode soc: mediatek: SVS: introduce MTK SVS engine ... Link: https://lore.kernel.org/r/b733bd82-6d99-23ef-0541-98e98eb8d3bc@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-12Merge tag 'sunxi-drivers-for-5.20-1' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers - build mbus driver only for ARM/ARM64 * tag 'sunxi-drivers-for-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: soc: sunxi: mbus: Only build the driver on ARM/ARM64 Link: https://lore.kernel.org/r/YshfPux1c2x9S7Fi@kista.localdomain Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-08soc: mediatek: mutex: Simplify with devm_platform_get_and_ioremap_resource()AngeloGioacchino Del Regno1-12/+6
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. While at it, also remove a redundant call to of_address_to_resource(), as this was getting the address of the same resource index 0: we can as well get the iostart from the 'regs' pointer. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220623121701.107512-1-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-07-08soc: mediatek: pm-domains: Add support for Helio X10 MT6795AngeloGioacchino Del Regno2-0/+117
Add pm-domains (mtcmos) data for MediaTek Helio X10 MT6795 SoC. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220503141441.125852-3-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-07-08Merge tag 'zynqmp-soc-for-v5.20' of https://github.com/Xilinx/linux-xlnx ↵Arnd Bergmann1-3/+2
into arm/soc arm64: ZynqMP SoC changes for v5.20 - Register SGI separately out of EEMI * tag 'zynqmp-soc-for-v5.20' of https://github.com/Xilinx/linux-xlnx: firmware: xilinx: Add TF_A_PM_REGISTER_SGI SMC call Link: https://lore.kernel.org/r/0196d1f3-e9c7-ef51-143d-e98b14980f63@monstr.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-08soc/tegra: Migrate to dev_pm_opp_set_config()Viresh Kumar1-21/+31
The OPP core now provides a unified API for setting all configuration types, i.e. dev_pm_opp_set_config(). Lets start using it. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08soc/tegra: Add comment over devm_pm_opp_set_clkname()Viresh Kumar1-0/+7
Explain why special handling was required here, it isn't obvious at all. Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Make dev_pm_opp_set_regulators() accept NULL terminated listViresh Kumar1-2/+2
Make dev_pm_opp_set_regulators() accept a NULL terminated list of names instead of making the callers keep the two parameters in sync, which creates an opportunity for bugs to get in. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Steven Price <steven.price@arm.com> # panfrost Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-07soc: mediatek: SVS: Use DEFINE_SIMPLE_DEV_PM_OPS for svs_pm_opsNathan Chancellor1-1/+1
When building this driver for an architecture that does not support CONFIG_PM_SLEEP, such as hexagon, the following warnings occur: drivers/soc/mediatek/mtk-svs.c:1481:12: error: unused function 'svs_suspend' [-Werror,-Wunused-function] static int svs_suspend(struct device *dev) ^ drivers/soc/mediatek/mtk-svs.c:1515:12: error: unused function 'svs_resume' [-Werror,-Wunused-function] static int svs_resume(struct device *dev) ^ 2 errors generated. This happens because SIMPLE_DEV_PM_OPS uses SET_SYSTEM_SLEEP_PM_OPS, which evaluates to nothing when CONFIG_PM_SLEEP is not set, leaving the functions unused in the eyes of the compiler. This problem was rectified in commit 1a3c7bb08826 ("PM: core: Add new *_PM_OPS macros, deprecate old ones") with new macros. Use DEFINE_SIMPLE_DEV_PM_OPS to fix the warning while not changing svs_pm_ops when CONFIG_PM_SLEEP is set. Fixes: 681a02e95000 ("soc: mediatek: SVS: introduce MTK SVS engine") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20220622175649.1856337-1-nathan@kernel.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-07-07soc: mediatek: mtk-pm-domains: Allow probing vreg supply on two MFGsAngeloGioacchino Del Regno4-2/+5
MediaTek SoCs have multiple MFG power-domains, exclusively used for the GPU which, in turn, requires external power supplies: make sure to have the MTK_SCPD_DOMAIN_SUPPLY cap on the two topmost MFGs to allow voting for regulators on/off upon usage of these power domains. This also ensures that the SRAM is actually powered and that we're not relying on the bootloader leaving this supply on when performing the first (and latter) poweron sequence for these domains' sram. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220623123850.110225-2-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-07-06soc: ti: pruss: Enable support for PRUSS-M subsystem on K3 AM62x SoCsKishon Vijay Abraham I1-0/+1
The K3 AM62x family of SoC has one PRUSS-M instance and it has two Programmable Real-Time Units (PRU0 and PRU1). This does not support Industrial Communications Subsystem features like Ethernet. The existing pruss platform driver has been updated to support this through a new AM62x specific compatible. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20220602120613.2175-4-kishon@ti.com
2022-07-06soc: qcom: icc-bwmon: Add bandwidth monitoring driverKrzysztof Kozlowski3-0/+437
Bandwidth monitoring (BWMON) sits between various subsytems like CPU, GPU, Last Level caches and memory subsystem. The BWMON can be configured to monitor the data throuhput between memory and other subsytems. The throughput is measured within specified sampling window and is used to vote for corresponding interconnect bandwidth. Current implementation brings support for BWMON v4, used for example on SDM845 to measure bandwidth between CPU (gladiator_noc) and Last Level Cache (memnoc). Usage of this BWMON allows to remove fixed bandwidth votes from cpufreq (CPU nodes) thus achieve high memory throughput even with lower CPU frequencies. The driver was tested on SDM845. Co-developed-by: Thara Gopinath <thara.gopinath@gmail.com> Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220704121730.127925-3-krzysztof.kozlowski@linaro.org
2022-07-06Merge tag 'tags/ib-mfd-soc-bcm-v5.20' into drivers/nextFlorian Fainelli1-24/+48
Immutable branch between MFD and SoC due for the v5.20 merge window Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-07-05soc: sunxi: mbus: Only build the driver on ARM/ARM64Samuel Holland1-0/+1
This driver exists as a workaround for old devicetrees which are missing interconnects properties, so it is only useful for those specific platforms, which all happen to be ARM or ARM64. This solves the issue that the driver fails to build on RISC-V, where PHYS_OFFSET is not defined. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220702032520.22129-1-samuel@sholland.org
2022-07-05soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OFKonrad Dybcio1-0/+2
The driver uses generic genpd OF APIs and with a very minimal config where nothing else selects them, this driver will not probe, as of_genpd_add_provider_onecell will return -EOPNOTSUPP. Make sure to select these in Kconfig to prevent that. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220701073700.17124-1-konrad.dybcio@somainline.org
2022-07-05soc: fsl: guts: check return value after calling of_iomap() in ↵Yang Yingliang1-0/+4
fsl_guts_get_soc_uid() of_iomap() may return NULL, so we need check the return value. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05soc: fsl: guts: fix return value check in fsl_guts_init()Yang Yingliang1-2/+2
In case of error, of_iomap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test and return -ENOMEM as error value. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-04soc: qcom: smem: use correct format charactersBill Wendling1-3/+3
When compiling with -Wformat, clang emits the following warnings: drivers/soc/qcom/smem.c:847:41: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] dev_err(smem->dev, "bad host %hu\n", remote_host); ~~~ ^~~~~~~~~~~ %u ./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err' dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__) ~~~ ^~~~~~~~~~~ ./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap' _p_func(dev, fmt, ##__VA_ARGS__); \ ~~~ ^~~~~~~~~~~ drivers/soc/qcom/smem.c:852:47: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] dev_err(smem->dev, "duplicate host %hu\n", remote_host); ~~~ ^~~~~~~~~~~ %u ./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err' dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__) ~~~ ^~~~~~~~~~~ ./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap' _p_func(dev, fmt, ##__VA_ARGS__); \ ~~~ ^~~~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct one and change type of remote_host to "u16" to match with other types. Signed-off-by: Bill Wendling <morbo@google.com> Tested-by: Justin Stitt <jstitt007@gmail.com> Reviewed-by: Justin Stitt <jstitt007@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-04soc: bcm: bcm2835-power: Bypass power_on/off() callsNicolas Saenz Julienne1-0/+8
Bypass power_on/power_off() when running on BCM2711 as they are not needed. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220625113619.15944-12-stefan.wahren@i2se.com
2022-07-04soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASBStefan Wahren1-2/+23
In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present with the ISP and H264 bits, and V3D is in the same place in the new ASB as the old one. Use the fact that 'pm->rpivid_asb' is populated as a hint that we're on BCM2711. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220625113619.15944-11-stefan.wahren@i2se.com
2022-07-04soc: bcm: bcm2835-power: Resolve ASB register macrosStefan Wahren1-7/+7
The macros in order to access the ASB registers have a hard coded base address. So extending them for other platforms would make them harder to read. As a solution resolve these macros. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220625113619.15944-10-stefan.wahren@i2se.com
2022-07-04soc: bcm: bcm2835-power: Refactor ASB controlStefan Wahren1-18/+13
The functions to control the async AXI bridges are almost identical. So define a general function to handle it and keep the original ones as wrapper. This should make this driver easier to extend. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220625113619.15944-9-stefan.wahren@i2se.com
2022-07-01Merge tag 'amlogic-drivers-for-v5.20' of ↵Arnd Bergmann2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/drivers Amlogic Drivers changes for v5.20: - Fix refcount leak in meson-secure-pwrc.c - Fix refcount leak in meson_mx_socinfo_init * tag 'amlogic-drivers-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: soc: amlogic: Fix refcount leak in meson-secure-pwrc.c meson-mx-socinfo: Fix refcount leak in meson_mx_socinfo_init Link: https://lore.kernel.org/r/0c01e173-9abf-69ac-7882-e6ecc3935c33@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-01Merge tag 'renesas-drivers-for-v5.20-tag1' of ↵Arnd Bergmann3-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers Renesas driver updates for v5.20 - Small fixes and improvements. * tag 'renesas-drivers-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: soc: renesas: rcar-sysc: Optimize rcar_sysc_area struct sizes soc: renesas: r8a779a0-sysc: Fix A2DP1 and A2CV[2357] PDR values Link: https://lore.kernel.org/r/cover.1656069638.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-01Merge tag 'at91-fixes-5.19' of ↵Arnd Bergmann1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 5.19 It contains 3 SoC fixes and 2 DT fixes: SoC: - fix the wakeup from RTC and RTT for ULP1 mode - fix section mismatch warning - fix SAM9X60 SiP detection DT: - fixes the EEPROMs compatibles for sama5d2_icp and sam9x60ek and EEPROM size for sam9x60ek * tag 'at91-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: pm: Mark at91_pm_secure_init as __init ARM: at91: fix soc detection for SAM9X60 SiPs ARM: dts: at91: sama5d2_icp: fix eeprom compatibles ARM: dts: at91: sam9x60ek: fix eeprom compatible and size ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt ARM: at91: pm: use proper compatible for sama5d2's rtc Link: https://lore.kernel.org/r/20220628135130.3114878-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-01soc: ixp4xx/npe: Fix unused match warningLinus Walleij1-1/+1
The kernel test robot found this inconsistency: drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning: 'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=] 737 | static const struct of_device_id ixp4xx_npe_of_match[] = { This is because the match is enclosed in the of_match_ptr() which compiles into NULL when OF is disabled and this is unnecessary. Fix it by dropping of_match_ptr() around the match. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220626074315.61209-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-30soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_registerMiaoqian Lin1-1/+3
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. When breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the child node. Add missing of_node_put() to avoid refcount leak. Fixes: 05589b30b21a ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220606064252.42595-1-linmq006@gmail.com
2022-06-30soc: qcom: llcc: Fix syntax errors in commentsXiang wangx1-1/+1
Delete the redundant word 'and'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220604142327.14714-1-wangxiang@cdjrlc.com
2022-06-30soc: qcom: ocmem: Fix refcount leak in of_get_ocmemMiaoqian Lin1-0/+3
of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() will check NULL pointer. Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220602042430.1114-1-linmq006@gmail.com
2022-06-29firmware: xilinx: Add TF_A_PM_REGISTER_SGI SMC callTanmay Shah1-3/+2
SGI interrupt register and reset is performed by EEMI ioctl IOCTL_REGISTER_SGI. However, this is not correct use of EEMI call. SGI registration functionality does not qualify as energy management activity and so shouldn't be mapped to EEMI call. This new call will replace IOCTL_REGISTER_SGI and will be handled by TF-A specific handler in TF-A. To maintain backward compatibility for a while firmware driver will still use IOCTL_REGISTER_SGI as fallback strategy if new call fails or is not supported by TF-A. This new design also helps to make TF-A as pass through layer for EEMI calls. So we don't have to maintain PM_IOCTL as EEMI API ID in TF-A. Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com> Acked-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20220607224253.54919-1-tanmay.shah@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-28soc: qcom: cmd-db: replace strscpy_pad() with strncpy()Douglas Anderson1-3/+7
Commit ac0126a01735 ("soc: qcom: cmd-db: replace strncpy() with strscpy_pad()") breaks booting on my sc7280-herobrine-herobrine device. From printouts I see that at bootup the function is called with an id of "lnbclka2" which is 8 bytes big. Previously all 8 bytes of this string were copied to the destination. Now only 7 bytes will be copied since strscpy_pad() saves a byte for '\0' termination. We don't need the '\0' termination in the destination. Let's go back to strncpy(). According to the warning: If a caller is using non-NUL-terminated strings, strncpy() can still be used, but destinations should be marked with the __nonstring attribute to avoid future compiler warnings. ...so we'll do that. While we're at it, let's change the query array to use "sizeof(ent->id)" so it can't possibly go out of sync with our later copy. Fixes: ac0126a01735 ("soc: qcom: cmd-db: replace strncpy() with strscpy_pad()") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220628064301.v3.1.Ie7b480cd99e2c13319220cbc108caf2bcd41286b@changeid
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 14:41:43 +0000