summaryrefslogtreecommitdiffstats
path: root/drivers/soc
AgeCommit message (Collapse)AuthorFilesLines
2018-08-23Merge tag 'armsoc-dt' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Olof Johansson: "Business as usual -- the bulk of our changes are to devicetree files with new hardware support, new SoCs and platforms, and new board types. New SoCs/platforms: - Raspberry Pi Compute Module (CM1) and IO board - i.MX6SSL from NXP - Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN and PLC interfaces - TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5 controllers, communication and PRU subsystem and lots of other interfaces (PCIe, USB3, etc). New boards and systems: - Several Atmel at91-based boards from Laird - Marvell Armada388-based Helios4 board from SolidRun - Samsung Aires-based phones (s5pv210) - Allwinner A64-based Pinebook laptop In addition to the above, there's the usual amount of new devices described on existing platforms, fixes and tweaks and new minor variants of boards/platforms" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (478 commits) arm64: dts: sdm845: Add tsens nodes arm64: dts: msm8996: thermal: Initialise via DT and add second controller arm64: dts: sprd: Add one suspend timer arm64: dts: sprd: Add SC27XX ADC device arm64: dts: sprd: Add SC27XX eFuse device arm64: dts: sprd: Add SC27XX vibrator device arm64: dts: sprd: Add SC27XX breathing light controller device arm64: dts: meson-axg: add spdif-dit codec arm64: dts: meson-axg: add lineout codec arm64: dts: meson-axg: add linein codec arm64: dts: meson-axg: add tdm interfaces arm64: dts: meson-axg: add tdmout formatters arm64: dts: meson-axg: add tdmin formatters arm64: dts: meson-axg: add spdifout arm64: dts: rockchip: add led support for Firefly-RK3399 arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399 arm64: dts: rockchip: add power button support for Firefly-RK3399 ARM: dts: aspeed: Add coprocessor interrupt controller arm64: dts: meson-axg: add audio arb reset controller arm64: dts: meson-axg: add usb power regulator ...
2018-08-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds18-13/+2926
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
2018-08-23Merge tag 'armsoc-soc' of ↵Linus Torvalds4-24/+155
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 32-bit SoC platform updates from Olof Johansson: "Most of the SoC updates in this cycle are cleanups and moves to more modern infrastructure: - Davinci was moved to common clock framework - OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the keyboard interface (bitbanged AT keyboard via GPIO). - Removal of some stale code for Renesas platforms - Power management improvements for i.MX6LL" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (112 commits) ARM: uniphier: select RESET_CONTROLLER arm64: uniphier: select RESET_CONTROLLER ARM: uniphier: remove empty Makefile ARM: exynos: Clear global variable on init error path ARM: exynos: Remove outdated maintainer information ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15 ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill soc: r9a06g032: don't build SMP files for non-SMP config ARM: shmobile: Add the R9A06G032 SMP enabler driver ARM: at91: pm: configure wakeup sources for ULP1 mode ARM: at91: pm: add PMC fast startup registers defines ARM: at91: pm: Add ULP1 mode support ARM: at91: pm: Use ULP0 naming instead of slow clock ARM: hisi: handle of_iomap and fix missing of_node_put ARM: hisi: check of_iomap and fix missing of_node_put ARM: hisi: fix error handling and missing of_node_put ARM: mx5: Set the DBGEN bit in ARM_GPC register ARM: imx51: Configure M4IF to avoid visual artifacts ARM: imx: call imx6sx_cpuidle_init() conditionally for 6sll ARM: imx: fix i.MX6SLL build ...
2018-08-18Merge tag 'rproc-v4.19' of git://github.com/andersson/remoteprocLinus Torvalds1-25/+62
Pull remoteproc updates from Bjorn Andersson: "This adds support for pre-start and post-shutdown hooks for remoteproc subdevices, refactors the Qualcomm Hexagon support to allow reuse between several drivers, makes authentication in the MDT file loader optional, migrates a few format strings to use %pK and migrates the Davinci driver to use the reset framework" * tag 'rproc-v4.19' of git://github.com/andersson/remoteproc: remoteproc/davinci: use the reset framework remoteproc/davinci: Mark error recovery as disabled remoteproc: st_slim: replace "%p" with "%pK" remoteproc: replace "%p" with "%pK" remoteproc: qcom: fix Q6V5_WCSS dependencies remoteproc: Reset table_ptr in rproc_start() failure paths remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvote remoteproc: qcom q6v5: fix modular build remoteproc: Introduce prepare and unprepare for subdevices remoteproc: rename subdev probe and remove functions remoteproc: Make client initialize ops in rproc_subdev remoteproc: Make start and stop in subdev optional remoteproc: Rename subdev functions to start/stop remoteproc: qcom: Introduce Hexagon V5 based WCSS driver remoteproc: qcom: q6v5-pil: Use common q6v5 helpers remoteproc: qcom: adsp: Use common q6v5 helpers remoteproc: q6v5: Extract common resource handling remoteproc: qcom: mdt_loader: Make the firmware authentication optional
2018-08-14Merge tag 'pm-4.19-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new framework for CPU idle time injection, to be used by all of the idle injection code in the kernel in the future, fix some issues and add a number of relatively small extensions in multiple places. Specifics: - Add a new framework for CPU idle time injection (Daniel Lezcano). - Add AVS support to the armada-37xx cpufreq driver (Gregory CLEMENT). - Add support for current CPU frequency reporting to the ACPI CPPC cpufreq driver (George Cherian). - Rework the cooling device registration in the imx6q/thermal driver (Bastian Stender). - Make the pcc-cpufreq driver refuse to work with dynamic scaling governors on systems with many CPUs to avoid scalability issues with it (Rafael Wysocki). - Fix the intel_pstate driver to report different maximum CPU frequencies on systems where they really are different and to ignore the turbo active ratio if hardware-managend P-states (HWP) are in use; make it use the match_string() helper (Xie Yisheng, Srinivas Pandruvada). - Fix a minor deferred probe issue in the qcom-kryo cpufreq driver (Niklas Cassel). - Add a tracepoint for the tracking of frequency limits changes (from Andriod) to the cpufreq core (Ruchi Kandoi). - Fix a circular lock dependency between CPU hotplug and sysfs locking in the cpufreq core reported by lockdep (Waiman Long). - Avoid excessive error reports on driver registration failures in the ARM cpuidle driver (Sudeep Holla). - Add a new device links flag to the driver core to make links go away automatically on supplier driver removal (Vivek Gautam). - Eliminate potential race condition between system-wide power management transitions and system shutdown (Pingfan Liu). - Add a quirk to save NVS memory on system suspend for the ASUS 1025C laptop (Willy Tarreau). - Make more systems use suspend-to-idle (instead of ACPI S3) by default (Tristian Celestin). - Get rid of stack VLA usage in the low-level hibernation code on 64-bit x86 (Kees Cook). - Fix error handling in the hibernation core and mark an expected fall-through switch in it (Chengguang Xu, Gustavo Silva). - Extend the generic power domains (genpd) framework to support attaching a device to a power domain by name (Ulf Hansson). - Fix device reference counting and user limits initialization in the devfreq core (Arvind Yadav, Matthias Kaehlcke). - Fix a few issues in the rk3399_dmc devfreq driver and improve its documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner). - Drop a redundant error message from the exynos-ppmu devfreq driver (Markus Elfring)" * tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits) PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through cpufreq: intel_pstate: Ignore turbo active ratio in HWP cpufreq: Fix a circular lock dependency problem cpu/hotplug: Add a cpus_read_trylock() function x86/power/hibernate_64: Remove VLA usage cpufreq: trace frequency limits change cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC cpufreq: armada-37xx: Add AVS support dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload. PM / devfreq: Init user limits from OPP limits, not viceversa PM / devfreq: rk3399_dmc: fix spelling mistakes. PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer. dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional. PM / devfreq: rk3399_dmc: remove wait for dcf irq event. dt-bindings: clock: add rk3399 DDR3 standard speed bins. ...
2018-08-14Merge branches 'pm-core', 'pm-domains', 'pm-sleep', 'acpi-pm' and 'pm-cpuidle'Rafael J. Wysocki1-1/+1
Merge changes in the PM core, system-wide PM infrastructure, generic power domains (genpd) framework, ACPI PM infrastructure and cpuidle for 4.19. * pm-core: driver core: Add flag to autoremove device link on supplier unbind driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER * pm-domains: PM / Domains: Introduce dev_pm_domain_attach_by_name() PM / Domains: Introduce option to attach a device by name to genpd PM / Domains: dt: Add a power-domain-names property * pm-sleep: PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through x86/power/hibernate_64: Remove VLA usage PM / hibernate: cast PAGE_SIZE to int when comparing with error code * acpi-pm: ACPI / PM: save NVS memory for ASUS 1025C laptop ACPI / PM: Default to s2idle in all machines supporting LP S0 * pm-cpuidle: ARM: cpuidle: silence error on driver registration failure
2018-08-10Merge branch 'regulator-4.19' into regulator-nextMark Brown10-7/+1873
2018-08-04Merge tag 'qcom-arm64-for-4.19-2' of ↵Olof Johansson10-7/+1873
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm ARM64 Updates for v4.19 - Part 2 * Add thermal nodes for MSM8996 and SDM845 * tag 'qcom-arm64-for-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (21 commits) arm64: dts: sdm845: Add tsens nodes arm64: dts: msm8996: thermal: Initialise via DT and add second controller soc: qcom: rmtfs-mem: fix memleak in probe error paths soc: qcom: llc-slice: Add missing MODULE_LICENSE() drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type() drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs firmware: qcom: scm: add a dummy qcom_scm_assign_mem() drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children drivers: qcom: rpmh-rsc: allow active requests from wake TCS drivers: qcom: rpmh: add support for batch RPMH request drivers: qcom: rpmh: allow requests to be sent asynchronously drivers: qcom: rpmh: cache sleep/wake state requests drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS drivers: qcom: rpmh: add RPMH helper functions drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs drivers: soc: Add LLCC driver dt-bindings: Documentation for qcom, llcc ...
2018-07-26Merge tag 'v4.18-next-soc' of ↵Olof Johansson1-2/+79
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/drivers - add pmic wrapper support for mt6797 - pmic wrapper fix chiper init - add support for pmic mt6351 * tag 'v4.18-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-26Merge tag 'soc-fsl-for-4.19' of ↵Olof Johansson13-3/+2658
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers Various updates to soc/fsl for 4.19 Moves DPAA2 DPIO driver from staging to fsl/soc Adds multiple-pin support to QE gpio driver * tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-26Merge tag 'sunxi-drivers-for-4.19' of ↵Olof Johansson1-2/+85
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers Allwinner drivers changes for 4.19 There's been work for this release cycles in both the SRAM controller driver in order to support more SoCs, as part of our VPU work, but also to enable the EMAC on the A64 (that needs to poke at registers within the same register space). Some work has been needed too to represent the bus to the display engine controllers that all need an SRAM to be mapped to the CPU to be able to access those controllers' registers. * tag 'sunxi-drivers-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: soc: sunxi: Add the A13, A23 and H3 system control compatibles drivers: soc: sunxi: Add support for the C1 SRAM region dt-bindings: sram: sunxi: Populate valid sections compatibles dt-bindings: sram: sunxi: Add A13, A20, A23 and H3 dedicated bindings soc: sunxi: sram: Add dt match for the A10 system-control compatible dt-bindings: sram: sunxi: Introduce new A10 binding for system-control bus: add bus driver for accessing Allwinner A64 DE2 dt-bindings: add binding for the Allwinner A64 DE2 bus soc: sunxi: sram: Add updated compatible string for A64 system control dt-bindings: sram: Rename A64 SRAM controller compatible soc: sunxi: export a regmap for EMAC clock reg on A64 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-26Merge tag 'qcom-drivers-for-4.19' of ↵Olof Johansson10-7/+1873
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Qualcomm ARM Based Driver Updates for v4.19 * Add Qualcomm LLCC driver * Add Qualcomm RPMH controller * Fix memleak in Qualcomm RMTFS * Add dummy qcom_scm_assign_mem() * Fix check for global partition in SMEM * tag 'qcom-drivers-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: soc: qcom: rmtfs-mem: fix memleak in probe error paths soc: qcom: llc-slice: Add missing MODULE_LICENSE() drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type() drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs firmware: qcom: scm: add a dummy qcom_scm_assign_mem() drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children drivers: qcom: rpmh-rsc: allow active requests from wake TCS drivers: qcom: rpmh: add support for batch RPMH request drivers: qcom: rpmh: allow requests to be sent asynchronously drivers: qcom: rpmh: cache sleep/wake state requests drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS drivers: qcom: rpmh: add RPMH helper functions drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs drivers: soc: Add LLCC driver dt-bindings: Documentation for qcom, llcc soc: qcom: smem: Correct check for global partition Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-24soc: fsl: cleanup Kconfig menuLi Yang3-3/+6
Put NXP/Freescale QorIQ SoC drivers under a menu and make the item naming more aligned. Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-07-24soc: fsl: dpio: Convert DPIO documentation to .rstRoy Pledge1-135/+0
Convert the Datapath I/O documentation to .rst format and move to the Documation/networking/dpaa2 directory Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-07-24staging: fsl-mc: Move DPIO from staging to drivers/soc/fslRoy Pledge11-0/+2759
Move the NXP DPIO (Datapath I/O Driver) out of the drivers/staging directory and into the drivers/soc/fsl directory. The DPIO driver enables access to Queue and Buffer Manager (QBMAN) hardware on NXP DPAA2 devices. This is a prerequisite to moving the DPAA2 Ethernet driver out of staging. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-07-24soc: fsl: qe: gpio: Add qe_gpio_set_multipleJoakim Tjernlund1-0/+28
This cousin to gpio-mpc8xxx was lacking a multiple pins method, add one. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Reviewed-by: Qiang Zhao <qiang.zhao@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-07-21Merge tag 'am654-for-v4.19-signed' of ↵Olof Johansson1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt TI AM654 support for v4.19 merge window This branch adds initial support for new Texas Instruments AM654 quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC architecture. Initially only basic devices are configured, support for more devices will follow later on. And many of the internal devices familiar from earlier TI SoCs should work with existing kernel device drivers. * tag 'am654-for-v4.19-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm64: dts: ti: Add support for AM654 EVM base board soc: ti: Add Support for AM654 SoC config option arm64: dts: ti: Add Support for AM654 SoC arm64: Add support for TI's K3 Multicore SoC architecture dt-bindings: arm: ti: Add bindings for AM654 SoC Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-21Merge tag 'imx-drivers-4.19' of ↵Olof Johansson1-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers i.MX drivers update for 4.19: - Handle i.MX6SL chip errata ERR006287 in the safest possible way by keeping the DISP domain always-on, because Upon resuming from power gating, the modules in the display power domain (eLCDIF, EPDC, PXP and SPDC) might fail to perform register reads correctly. - Use GENPD_FLAG_ALWAYS_ON flag for i.MX6QP PU ERR009619 handling. It is functionally identical to the exsiting implementation but simpler and slightly faster. * tag 'imx-drivers-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: imx: gpc: Disable 6sl display power gating for ERR006287 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-21Merge tag 'renesas-arm-soc2-for-v4.19' of ↵Olof Johansson2-0/+99
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Second Round of Renesas ARM Based SoC Updates for v4.19 * Always enable ARCH_TIMER on SoCs with A7 or A15 All such SoCs have ARCH_TIMER so there is no need for it to be optional. This allows clean-up which is included in this change. * Do not compile r8a7779_platform_cpu_kill when it is unused This avoids a warning by shuffling code into an existing #ifdef r8a7779 is the R-Car H1 SoC * Add SMP enabler driver for the RZ/N1D (r9a06g032) SoC This is to allow SMP to be enabled via DT on the r9a06g032 * Stop compiling headsmp-apmu for non-SMP configs This is a minor clean-up allowing removal of an #ifdef * tag 'renesas-arm-soc2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15 ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill soc: r9a06g032: don't build SMP files for non-SMP config ARM: shmobile: Add the R9A06G032 SMP enabler driver ARM: shmobile: rcar-gen2: Stop compiling headsmp-apmu on !SMP Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-21soc: qcom: rmtfs-mem: fix memleak in probe error pathsJohan Hovold1-2/+1
Make sure to set the mem device release callback before calling put_device() in a couple of probe error paths so that the containing object also gets freed. Fixes: d1de6d6c639b ("soc: qcom: Remote filesystem memory driver") Cc: stable <stable@vger.kernel.org> # 4.15 Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21soc: qcom: llc-slice: Add missing MODULE_LICENSE()Niklas Cassel1-0/+3
Add missing MODULE_LICENSE(). According to the SPDX-License-Identifier, the license is GPL v2. Fixes the following warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/soc/qcom/llcc-slice.o Fixes: a3134fb ("drivers: soc: Add LLCC driver") Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type()Raju P.L.S.S.S.N1-4/+2
The patch fixes the bug reported by Dan Carpenter. It removes the unnecessary err check for ‘tcs’ reported by static checker warning: drivers/soc/qcom/rpmh-rsc.c:111 tcs_invalidate() warn: 'tcs' isn't an ERR_PTR See also: drivers/soc/qcom/rpmh-rsc.c:178 get_tcs_for_msg() warn: 'tcs' isn't an ERR_PTR drivers/soc/qcom/rpmh-rsc.c:180 get_tcs_for_msg() warn: 'tcs' isn't an ERR_PTR https://www.spinics.net/lists/linux-soc/msg04624.html Fixes: 9a3afcf ("drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Reviewed-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcsRaju P.L.S.S.S.N1-1/+1
get_req_from_tcs introduced in patch[1] returns tcs_request from tcs_group. The size of tcs (of type - tcs_group) array in rsc_drv is TCS_TYPE_NR. So the loop index needs to be iterated up to TCS_TYPE_NR only. [1] https://patchwork.kernel.org/patch/10477547/ Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help childrenDouglas Anderson1-0/+13
Children of RPMh will need access to cmd_db. Rather than having each child have code to check if cmd_db is ready let's add the check to RPMh. With this we'll be able to remove this boilerplate code from clk-rpmh.c and qcom-rpmh-regulator.c. Neither of these files has landed upstream yet but patches are pretty far along. === This code is based upon v11 of Lina and Raju's RPMh series. Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: allow active requests from wake TCSLina Iyer1-2/+21
Some RSCs may only have sleep and wake TCS, i.e, there is no dedicated TCS for active mode request, but drivers may still want to make active requests from these RSCs. In such cases re-purpose the wake TCS to send active state requests. The requirement for this is that the driver is aware that the wake TCS is being repurposed to send active request, hence the sleep and wake TCSes be invalidated before the active request is sent. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh: add support for batch RPMH requestLina Iyer3-2/+160
Platform drivers need make a lot of resource state requests at the same time, say, at the start or end of an usecase. It can be quite inefficient to send each request separately. Instead they can give the RPMH library a batch of requests to be sent and wait on the whole transaction to be complete. rpmh_write_batch() is a blocking call that can be used to send multiple RPMH command sets. Each RPMH command set is set asynchronously and the API blocks until all the command sets are complete and receive their tx_done callbacks. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh: allow requests to be sent asynchronouslyLina Iyer2-0/+53
Platform drivers that want to send a request but do not want to block until the RPMH request completes have now a new API - rpmh_write_async(). The API allocates memory and send the requests and returns the control back to the platform driver. The tx_done callback from the controller is handled in the context of the controller's thread and frees the allocated memory. This API allows RPMH requests from atomic contexts as well. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh: cache sleep/wake state requestsLina Iyer3-7/+205
Active state requests are sent immediately to the RSC controller, while sleep and wake state requests are cached in this driver to avoid taxing the RSC controller repeatedly. The cached values will be sent to the controller when the rpmh_flush() is called. Generally, flushing is a system PM activity and may be called from the system PM drivers when the system is entering suspend or deeper sleep modes during cpuidle. Also allow invalidating the cached requests, so they may be re-populated again. Signed-off-by: Lina Iyer <ilina@codeaurora.org> [rplsssn: remove unneeded semicolon, address line over 80chars error] Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCSLina Iyer1-0/+44
Allow sleep and wake commands to be cleared from the respective TCSes, so that they can be re-populated. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: write sleep/wake requests to TCSLina Iyer2-0/+129
Sleep and wake requests are sent when the application processor subsystem of the SoC is entering deep sleep states like in suspend. These requests help lower the system power requirements when the resources are not in use. Sleep and wake requests are written to the TCS slots but are not triggered at the time of writing. The TCS are triggered by the firmware after the last of the CPUs has executed its WFI. Since these requests may come in different batches of requests, it is the job of this controller driver to find and arrange the requests into the available TCSes. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh: add RPMH helper functionsLina Iyer4-3/+154
Sending RPMH requests and waiting for response from the controller through a callback is common functionality across all platform drivers. To simplify drivers, add a library functions to create RPMH client and send resource state requests. rpmh_write() is a synchronous blocking call that can be used to send active state requests. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: log RPMH requests in FTRACELina Iyer3-1/+93
Log sent RPMH requests and interrupt responses in FTRACE. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> [rplsssn@codeaurora.org: rebase to v4.18-rc1 & fix merge conflict] Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCsLina Iyer4-0/+561
Add controller driver for QCOM SoCs that have hardware based shared resource management. The hardware IP known as RSC (Resource State Coordinator) houses multiple Direct Resource Voter (DRV) for different execution levels. A DRV is a unique voter on the state of a shared resource. A Trigger Control Set (TCS) is a bunch of slots that can house multiple resource state requests, that when triggered will issue those requests through an internal bus to the Resource Power Manager Hardened (RPMH) blocks. These hardware blocks are capable of adjusting clocks, voltages, etc. The resource state request from a DRV are aggregated along with state requests from other processors in the SoC and the aggregate value is applied on the resource. Some important aspects of the RPMH communication - - Requests are <addr, value> with some header information - Multiple requests (upto 16) may be sent through a TCS, at a time - Requests in a TCS are sent in sequence - Requests may be fire-n-forget or completion (response expected) - Multiple TCS from the same DRV may be triggered simultaneously - Cannot send a request if another request for the same addr is in progress from the same DRV - When all the requests from a TCS are complete, an IRQ is raised - The IRQ handler needs to clear the TCS before it is available for reuse - TCS configuration is specific to a DRV - Platform drivers may use DRV from different RSCs to make requests Resource state requests made when CPUs are active are called 'active' state requests. Requests made when all the CPUs are powered down (idle state) are called 'sleep' state requests. They are matched by a corresponding 'wake' state requests which puts the resources back in to previously requested active state before resuming any CPU. TCSes are dedicated for each type of requests. Active mode TCSes (AMC) are used to send requests immediately to the resource, while control TCS are used to provide specific information to the controller. Sleep and Wake TCS send sleep and wake requests, after and before the system halt respectively. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: soc: Add LLCC driverRishabh Bhatnagar4-0/+448
LLCC (Last Level Cache Controller) provides additional cache memory in the system. LLCC is partitioned into multiple slices and each slice gets its own priority, size, ID and other config parameters. LLCC driver programs these parameters for each slice. Clients that are assigned to use LLCC need to get information such size & ID of the slice they get and activate or deactivate the slice as needed. LLCC driver provides API for the clients to perform these operations. Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21soc: qcom: smem: Correct check for global partitionBjorn Andersson1-5/+5
The moved check for the global partition ended up in the wrong place and I failed to spot this in my review. This moves it to the correct place. Fixes: 11d2e7edac6a ("soc: qcom: smem: check sooner in qcom_smem_set_global_partition()") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-20soc: r9a06g032: don't build SMP files for non-SMP configArnd Bergmann1-0/+2
Without CONFIG_SMP, we get a build failure: In file included from include/linux/byteorder/little_endian.h:5, from arch/arm/include/uapi/asm/byteorder.h:22, from include/asm-generic/bitops/le.h:6, from arch/arm/include/asm/bitops.h:342, from include/linux/bitops.h:18, from include/linux/kernel.h:11, from include/asm-generic/bug.h:18, from arch/arm/include/asm/bug.h:60, from include/linux/bug.h:5, from include/linux/io.h:23, from drivers/soc/renesas/r9a06g032-smp.c:11: drivers/soc/renesas/r9a06g032-smp.c: In function 'r9a06g032_smp_boot_secondary': drivers/soc/renesas/r9a06g032-smp.c:43:21: error: 'secondary_startup' undeclared (first use in this function) writel(__pa_symbol(secondary_startup), cpu_bootaddr); ^~~~~~~~~~~~~~~~~ This makes the compilation of that file conditional on SMP support. It would probably be better for consistency to leave that file in arch/arm/mach-shmobile/, matching what we do for all other smp operations. Fixes: cde4f86f9249 ("arm: shmobile: Add the R9A06G032 SMP enabler driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-20ARM: shmobile: Add the R9A06G032 SMP enabler driverMichel Pollet2-0/+97
The Renesas R9A06G032 second CA7 is parked in a ROM pen at boot time, it equires a special enable method to get it started. Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-19Merge tag 'imx-fixes-4.18-3' of ↵Olof Johansson1-0/+21
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.18, round 3: - Restrict GPC driver on register range that is accessible by regmap, so that we can avoid user space from triggering imprecise external abort exception. * tag 'imx-fixes-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: gpc: restrict register range for regmap access Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-19soc: sunxi: Add the A13, A23 and H3 system control compatiblesMaxime Ripard1-0/+12
The A13, A23 and H3 have variations of the system controls, in part due to the SRAM that are available (and can be mapped) in the SoC. In order to make it future proof, let's add compatibles for these SoCs in the driver. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-07-19soc: imx: gpc: restrict register range for regmap accessAnson Huang1-0/+21
GPC registers are NOT continuous, some registers are reserved and accessing them from userspace will trigger external abort, add regmap register access table to avoid below abort: root@imx6slevk:~# cat /sys/kernel/debug/regmap/20dc000.gpc/registers [ 108.480477] Unhandled fault: imprecise external abort (0x1406) at 0xb6db5004 [ 108.487985] pgd = 42b54bfd [ 108.490741] [b6db5004] *pgd=ba1b7831 [ 108.494386] Internal error: : 1406 [#1] SMP ARM [ 108.498943] Modules linked in: [ 108.502043] CPU: 0 PID: 389 Comm: cat Not tainted 4.18.0-rc1-00074-gc9f1f60-dirty #482 [ 108.509982] Hardware name: Freescale i.MX6 SoloLite (Device Tree) [ 108.516123] PC is at regmap_mmio_read32le+0x20/0x24 [ 108.521031] LR is at regmap_mmio_read+0x40/0x60 [ 108.525586] pc : [<c059cf74>] lr : [<c059d1ac>] psr: 20060093 [ 108.531875] sp : eccf1d98 ip : eccf1da8 fp : eccf1da4 [ 108.537122] r10: ec2d3800 r9 : eccf1f60 r8 : ecfc0000 [ 108.542370] r7 : eccf1e2c r6 : eccf1e2c r5 : 00000028 r4 : ec338e00 [ 108.548920] r3 : 00000000 r2 : eccf1e2c r1 : f0980028 r0 : 00000000 [ 108.555474] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 108.562720] Control: 10c5387d Table: acf4004a DAC: 00000051 [ 108.568491] Process cat (pid: 389, stack limit = 0xd4318a65) [ 108.574174] Stack: (0xeccf1d98 to 0xeccf2000) Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-18soc: ti: Add Support for AM654 SoC config optionNishanth Menon1-0/+14
Add option to build AM6 SoC specific components Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benjamin Fair <b-fair@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-17soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errataLeonard Crestez1-6/+2
This is functionally identical but simpler and slightly faster. The PU domain is turned on at boot time and never turned off. In the current implementation the pm core will repeatedly call power_off when the domain is unused and get -EBUSY back. If the domain is marked as "always on" instead the pm core won't even attempt to turn it off. In theory on 6qp it is safe to turn PU off in suspend, however that is best accomplished with a new core flag. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-16soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCsArgus Lin1-0/+29
MT6351 is a new power management IC and it is used for mt6797 SoCs. To define mt6351_regs for pmic register mapping and pmic_mt6351 for accessing register. Signed-off-by: Argus Lin <argus.lin@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-07-16soc: mediatek: pwrap: add pwrap driver for mt6797 SoCsArgus Lin1-0/+50
mt6797 is a highly integrated SoCs, it uses mt6351 for power management. This patch adds pwrap driver to access mt6351. Pwrap of mt6797 support dynamic priority meichanism, sequence monitor and starvation mechanism to make transaction more reliable. A big change from V4 to V5 is we remove INT1 interrupt declaration since it is only for debug purpose. The PWRAP_RDDMY, RESET and DCM can use legacy setting, it is backwards compatible. The new caps flag declaration is not needed, just remove it. Signed-off-by: Argus Lin <argus.lin@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-07-16soc: mediatek: pwrap: fix cipher init setting errorArgus Lin1-2/+0
PWRAP_DEW_CIPHER_LOAD and PWRAP_DEW_CIPHER_START only exist at PMIC_mt6397 datasheet. We fix it before merge PMIC_mt6351 driver. Fixes: 5ae48040aa47 ("soc: mediatek: PMIC wrap: add mt6323 slave support") Signed-off-by: Argus Lin <argus.lin@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-07-14Merge tag 'omap-for-v4.19/soc-signed' of ↵Olof Johansson1-1/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc SoC updates for omaps for v4.19 merge window These changes are mostly PM related changes for am335x and am437x to support RTC only suspend mode. Some of the clock and driver related chances are still pending so it's not yet fully functional. Also included is a change for PM debug sysfs entry to use DEFINE_SHOW_ATTRIBUTE. * tag 'omap-for-v4.19/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: sleep33/43xx: Add RTC-Mode support ARM: OMAP2+: sleep33/43xx: Make sleep actions configurable ARM: OMAP2+: reuse DEFINE_SHOW_ATTRIBUTE() macro ARM: hwmod: RTC: Don't assume lock/unlock will be called with irq enabled Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-14Merge tag 'arm-soc/for-4.19/drivers' of https://github.com/Broadcom/stblinux ↵Olof Johansson1-0/+16
into next/drivers This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes for 4.19, please pull the following: - Doug updates the low-level suspend/resume code for ARM SoCs to support the latest rev B3.0 memory controllers found on newer chips with an appropriate match structure to perform the correct entry sequencing - Florian updates the Device Tree binding document for these memory controllers to list all possible compatible strings that exist given the supported memory controllers. - Stefan adds the GET_THROTTLED firmware property value that is required for the Rasperry Pi voltage monitoring driver and updates the Raspberry Pi firmware driver accordingly to register such a device using the HWMON subsystem. Finally he adds support for reporting under voltage conditions using a specialized HWMON driver. * tag 'arm-soc/for-4.19/drivers' of https://github.com/Broadcom/stblinux: firmware: raspberrypi: Remove VLA usage firmware: raspberrypi: Register hwmon driver hwmon: Add support for RPi voltage sensor soc: bcm: brcmstb: Add missing DDR MEMC compatible strings soc: bcm: brcmstb: pm: Add support for newer rev B3.0 controllers ARM: bcm2835: Add GET_THROTTLED firmware property Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-11soc: imx: gpc: Disable 6sl display power gating for ERR006287Leonard Crestez1-0/+10
The imx6sl chip errata document describes ERR006287 like this: > Upon resuming from power gating, the modules in the display power domain (eLCDIF, EPDC, PXP and SPDC) might fail to perform register reads correctly. > When the modules listed above are used, do not use power gating on the display power domain. Link: https://www.nxp.com/docs/en/errata/IMX6SLCE.pdf#page=62 Handle this in the safest possible way by keeping the DISP domain always-on. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-11drivers: soc: sunxi: Add support for the C1 SRAM regionMaxime Ripard1-0/+10
This introduces support for the SRAM C1 section, that is controlled by the system controller. This SRAM area can be muxed either to the CPU or the Video Engine, that needs this area to store various tables (e.g. the Huffman VLD decoding tables). This only supports devices with the same layout as the A10 (which also includes the A13, A20, A33 and other SoCs). Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-07-11soc: sunxi: sram: Add dt match for the A10 system-control compatiblePaul Kocialkowski1-0/+4
This binds the new A10 system-control compatible to the associated driver, with the same driver data as the previous compatible. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>