summaryrefslogtreecommitdiffstats
path: root/drivers/soc
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner38-0/+38
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds3-0/+153
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull IRQ chip updates from Ingo Molnar: "A late irqchips update: - New TI INTR/INTA set of drivers - Rewrite of the stm32mp1-exti driver as a platform driver - Update the IOMMU MSI mapping API to be RT friendly - A number of cleanups and other low impact fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) iommu/dma-iommu: Remove iommu_dma_map_msi_msg() irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg() irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg() irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg() irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg() iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts genirq/msi: Add a new field in msi_desc to store an IOMMU cookie arm64: arch_k3: Enable interrupt controller drivers irqchip/ti-sci-inta: Add msi domain support soc: ti: Add MSI domain bus support for Interrupt Aggregator irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings irqchip/ti-sci-intr: Add support for Interrupt Router driver dt-bindings: irqchip: Introduce TISCI Interrupt router bindings gpio: thunderx: Use the default parent apis for {request,release}_resources genirq: Introduce irq_chip_{request,release}_resource_parent() apis firmware: ti_sci: Add helper apis to manage resources firmware: ti_sci: Add RM mapping table for am654 firmware: ti_sci: Add support for IRQ management firmware: ti_sci: Add support for RM core ops ...
2019-05-16Merge tag 'soc-fsl-fix-v5.1' of ↵Olof Johansson1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/late NXP/FSL soc driver fixes for v5.1 QE drivers - Fix an error path in qe_pin_request() * tag 'soc-fsl-fix-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc/fsl/qe: Fix an error code in qe_pin_request() Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-16soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probeDan Carpenter1-2/+2
The devm_ioremap_resource() function doesn't retunr NULL, it returns error pointers. Fixes: ecc133c6da60 ("soc: ixp4xx: qmgr: Pass resources") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds25-174/+1948
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...
2019-05-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds6-0/+1270
Pull ARM SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms. Major themes this release: - Conversion of ixp4xx to a modern platform (drivers, DT, bindings) - Moving some of the ep93xx headers around to get it closer to multiplatform enabled. - Cleanups of Davinci This also contains a few patches that were queued up as fixes before 5.1 but I didn't get sent in before release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) ARM: debug-ll: add default address for digicolor ARM: u300: regulator: add MODULE_LICENSE() ARM: ep93xx: move private headers out of mach/* ARM: ep93xx: move pinctrl interfaces into include/linux/soc ARM: ep93xx: keypad: stop using mach/platform.h ARM: ep93xx: move network platform data to separate header ARM: stm32: add AMBA support for stm32 family MAINTAINERS: update arch/arm/mach-davinci ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ...
2019-05-15Merge tag 'pm-5.2-rc1-2' of ↵Linus Torvalds1-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These fix a recent regression causing kernels built with CONFIG_PM unset to crash on systems that support the Performance and Energy Bias Hint (EPB), clean up the cpufreq core and some users of transition notifiers and introduce a new power domain flag into the generic power domains framework (genpd). Specifics: - Fix recent regression causing kernels built with CONFIG_PM unset to crash on systems that support the Performance and Energy Bias Hint (EPB) by avoiding to compile the EPB-related code depending on CONFIG_PM when it is unset (Rafael Wysocki). - Clean up the transition notifier invocation code in the cpufreq core and change some users of cpufreq transition notifiers accordingly (Viresh Kumar). - Change MAINTAINERS to cover the schedutil governor as part of cpufreq (Viresh Kumar). - Simplify cpufreq_init_policy() to avoid redundant computations (Yue Hu). - Add explanatory comment to the cpufreq core (Rafael Wysocki). - Introduce a new flag, GENPD_FLAG_RPM_ALWAYS_ON, to the generic power domains (genpd) framework along with the first user of it (Leonard Crestez)" * tag 'pm-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: soc: imx: gpc: Use GENPD_FLAG_RPM_ALWAYS_ON for ERR009619 PM / Domains: Add GENPD_FLAG_RPM_ALWAYS_ON flag cpufreq: Update MAINTAINERS to include schedutil governor cpufreq: Don't find governor for setpolicy drivers in cpufreq_init_policy() cpufreq: Explain the kobject_put() in cpufreq_policy_alloc() cpufreq: Call transition notifier only once for each policy x86: intel_epb: Take CONFIG_PM into account
2019-05-13soc: imx: gpc: Use GENPD_FLAG_RPM_ALWAYS_ON for ERR009619Leonard Crestez1-2/+11
This allows PU domain to be turned off in suspend and save power. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-01soc: ti: Add MSI domain bus support for Interrupt AggregatorLokesh Vutla3-0/+153
With the system coprocessor managing the range allocation of the inputs to Interrupt Aggregator, it is difficult to represent the device IRQs from DT. The suggestion is to use MSI in such cases where devices wants to allocate and group interrupts dynamically. Create a MSI domain bus layer that allocates and frees MSIs for a device. APIs that are implemented: - ti_sci_inta_msi_create_irq_domain() that creates a MSI domain - ti_sci_inta_msi_domain_alloc_irqs() that creates MSIs for the specified device and resource. - ti_sci_inta_msi_domain_free_irqs() frees the irqs attached to the device. - ti_sci_inta_msi_get_virq() for getting the virq attached to a specific event. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-30soc: sunxi: Fix missing dependency on REGMAP_MMIOSamuel Holland1-0/+1
When enabling ARCH_SUNXI from allnoconfig, SUNXI_SRAM is enabled, but not REGMAP_MMIO, so the kernel fails to link with an undefined reference to __devm_regmap_init_mmio_clk. Select REGMAP_MMIO, as suggested in drivers/base/regmap/Kconfig. This creates the following dependency loop: drivers/of/Kconfig:68: symbol OF_IRQ depends on IRQ_DOMAIN kernel/irq/Kconfig:63: symbol IRQ_DOMAIN is selected by REGMAP drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by SUNXI_SRAM drivers/soc/sunxi/Kconfig:4: symbol SUNXI_SRAM is selected by USB_MUSB_SUNXI drivers/usb/musb/Kconfig:63: symbol USB_MUSB_SUNXI depends on GENERIC_PHY drivers/phy/Kconfig:7: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3 drivers/phy/broadcom/Kconfig:29: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS drivers/net/phy/Kconfig:12: symbol MDIO_BUS default is visible depending on PHYLIB drivers/net/phy/Kconfig:181: symbol PHYLIB is selected by ARC_EMAC_CORE drivers/net/ethernet/arc/Kconfig:18: symbol ARC_EMAC_CORE is selected by ARC_EMAC drivers/net/ethernet/arc/Kconfig:24: symbol ARC_EMAC depends on OF_IRQ To fix the circular dependency, make USB_MUSB_SUNXI select GENERIC_PHY instead of depending on it. This matches the use of GENERIC_PHY by all but two other drivers. Cc: <stable@vger.kernel.org> # 4.19 Fixes: 5828729bebbb ("soc: sunxi: export a regmap for EMAC clock reg on A64") Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-29soc: aspeed: fix KconfigOlof Johansson1-0/+1
Fixes build break: scripts/kconfig/conf --allnoconfig Kconfig drivers/soc/Kconfig:24: 'menu' in different file than 'menu' drivers/soc/aspeed/Kconfig:1: location of the 'menu' drivers/Kconfig:233: 'menu' in different file than 'menu' drivers/soc/aspeed/Kconfig:1: location of the 'menu' <none>:34: syntax error Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29Merge tag 'v5.2-rockchip-drivers-1' of ↵Olof Johansson1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/drivers Select correct pwm solution by default. * tag 'v5.2-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: Set the proper PWM for rk3288 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29Merge tag 'v5.1-next-soc' of ↵Olof Johansson1-2/+109
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers pmic wrapper: - add mt8516 bindings - add mt8516 driver support - fix clang warning * tag 'v5.1-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: pwrap: Zero initialize rdata in pwrap_init_cipher soc: mediatek: pwrap: add support for MT8516 pwrap soc: mediatek: pwrap: add missing check on rstc dt-bindings: pwrap: mediatek: add pwrap support for MT8516 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29Merge tag 'qcom-drivers-for-5.2' of ↵Olof Johansson4-8/+26
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/drivers Qualcomm ARM Based Driver Updates for v5.2 * Update MAINTAINERS for Andy Gross's new email address * Add support for mmap in RMTFS * Fixup for QMI to change txn wait to non-interruptible * Fixup for error code in probe of cmd-db * Fixup for slot number check in RMPH-RSC * tag 'qcom-drivers-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: MAINTAINERS: Update email for Qualcomm SoC maintainer drivers: soc: qcom: rpmh-rsc: Correct check for slot number soc: qcom: cmd-db: Fix an error code in cmd_db_dev_probe() soc: qcom: qmi: Change txn wait to non-interruptible soc: qcom: rmtfs: Add support for mmap functionality Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29soc: add aspeed folder and misc driversPatrick Venture6-0/+672
Create a SoC folder for the ASPEED parts and place the misc drivers currently present into this folder. These drivers are not generic part drivers, but rather only apply to the ASPEED SoCs. Signed-off-by: Patrick Venture <venture@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29Merge tag 'imx-drivers-5.2' of ↵Olof Johansson4-31/+132
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers change for 5.2: - A series from Aisheng to generalize the SCU powerdomain driver for easier adding new SCU based platforms like imx8qm. - Add a generic i.MX8 SoC driver for reporting SoC and platform information. - Replace explicit polling loop with a call to regmap_read_poll_timeout() for gpcv2 driver to avoid code repetition. - Use devm_platform_ioremap_resource() to simplify gpc/gpcv2 driver code a bit. - Add general IRQ support for imx-scu driver, so that interrupt of device like RTC, thermal and watchdog can be handled. * tag 'imx-drivers-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: Add generic i.MX8 SoC driver firmware: imx: enable imx scu general irq function soc: imx: gpcv2: use devm_platform_ioremap_resource() to simplify code soc: imx: gpc: use devm_platform_ioremap_resource() to simplify code firmware: imx: scu-pd: decouple the SS information from domain names firmware: imx: scu-pd: add specifying the base of domain name index support firmware: imx: scu-pd: use bool to set postfix soc: imx: gpcv2: Make use of regmap_read_poll_timeout() Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-drivers-2' of ↵Olof Johansson1-16/+144
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers soc: amlogic: updates for v5.2, round 2 - VPU power domain: add supporg for G12A SoCs - socinfo: add new SoC and package IDS. * tag 'amlogic-drivers-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'ixp4xx-for-armsoc' of ↵Olof Johansson6-0/+1270
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/soc This modernizes the IXP4xx platform and adds initial Device Tree Support. We migrate to MULTI_IRQ_HANDLER, bumps the IRQs to offset 16, converts to SPARSE_IRQ, then we add proper subsystem drivers in each subsystem for irqchip, GPIO and clocksource and switch over to using these new drivers. Next we modernize the NPE and QMGR drivers and push them down into drivers/soc. This has been tested on the IXP4xx NSLU2 and the Gateworks GW2358-4. * tag 'ixp4xx-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: (31 commits) ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ARM: ixp4xx: Move IXP4xx QMGR and NPE headers ARM: ixp4xx: Move NPE and QMGR to drivers/soc ARM: dts: Add some initial IXP4xx device trees ARM: ixp4xx: Add device tree boot support ARM: ixp4xx: Add DT bindings gpio: ixp4xx: Add OF probing support gpio: ixp4xx: Add DT bindings clocksource/drivers/ixp4xx: Add OF initialization support clocksource/drivers/ixp4xx: Add DT bindings ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'renesas-drivers-for-v5.2' of ↵Olof Johansson1-0/+3
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/drivers Renesas ARM Based SoC Drivers Updates for v5.2 * Identify R-Car M3-W ES1.3 * tag 'renesas-drivers-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: Identify R-Car M3-W ES1.3 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'tegra-for-5.2-soc' of ↵Olof Johansson1-37/+134
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers soc/tegra: Changes for v5.2-rc1 Besides a couple of fixes to better cope with deferred probing, this set of patches also implements the acquire/release protocol for resets used during powergate operations. This is necessary to allow these resets to be temporarily shared with other devices that may also need to control these resets. * tag 'tegra-for-5.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc/tegra: pmc: Implement acquire/release for resets reset: Add acquire/release support for arrays reset: Add acquired flag to of_reset_control_array_get() reset: add acquired/released state for exclusive reset controls Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'zynqmp-soc-for-v5.2' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson2-12/+16
arm/drivers arm64: zynqmp: SoC changes for v5.2 - Add support for ZynqMP fpga manager - Defer some probes which depends on firmware driver to be ready - Debugfs fix * tag 'zynqmp-soc-for-v5.2' of https://github.com/Xilinx/linux-xlnx: fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's drivers: Defer probe if firmware is not ready firmware: xilinx: fix debugfs write handler Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'omap-for-v5.2/am4-pm-v2-signed' of ↵Olof Johansson2-52/+226
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers PM changes for am335x and am437x This series adds support for am437x RTC-only mode in suspend. In the RTC-only mode suspend, everything is shut down except the RTC. This makes the power consumption very low for suspend mode. To support RTC-only mode, we need to export omap_rtc_power_off_program() from the rtc driver and improve PM code to save and restore the wkup domain context. As RTC-only mode depends on the device being wired properly for things like memory, we need to also check for the machine type before we allow it. We also need to run DDR3 hardware leveling on resume. Note that there is a trivial merge conflict between the RTC branch and these changes where the RTC branch makes tm2bcd() a void function and the error handling parts can be just dropped. * tag 'omap-for-v5.2/am4-pm-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: sleep43xx: Run EMIF HW leveling on resume path memory: ti-emif-sram: Add ti_emif_run_hw_leveling for DDR3 hardware leveling soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support soc: ti: pm33xx: Move the am33xx_push_sram_idle to the top ARM: OMAP2+: pm33xx: Add support for rtc+ddr in self refresh mode rtc: OMAP: Add support for rtc-only mode Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28Merge tag 'amlogic-drivers' of ↵Olof Johansson1-16/+27
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers soc: Amlogic updates for v5.2 - socinfo: support new SoCs / packages * tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: meson-gx-socinfo: add missing of_node_put after of_device_is_available soc: amlogic: gx-socinfo: Add new SoC IDs and Packages IDs soc: amlogic: gx-socinfo: Add mask for each SoC packages Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-23soc: ixp4xx: qmgr: Add DT probe codeLinus Walleij1-0/+8
This makes the queue manager driver able to probe from the device tree. It only needs to get a memory resource and two interrupts and the platform device provides these as resources, so all is pretty simple. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23soc: ixp4xx: npe: Add DT probe codeLinus Walleij1-0/+8
This makes the NPE driver able to probe from the device tree. It only needs to get three memory resources and the plaform device provide these, so all is pretty simple. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23soc: ixp4xx: qmgr: Pass resourcesLinus Walleij1-36/+35
Instead of using hardcoded base address implicitly obtained through <linux/io.h>, pass the physical base for the QMGR block as a memory resource and remap it in the driver. Also pass the two IRQs as resources and obtain them in the driver. Use devm_* accessors and simplify the error path in the process. Drop memory region request as this is done by the devm_ioremap* functions. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23soc: ixp4xx: Remove unused functionsLinus Walleij1-23/+0
These former inlines turn out to be unused in the kernel. If they are needed in the future, they can be resurrected by reverting or studying this commit. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23soc: ixp4xx: Uninline several functionsLinus Walleij1-0/+117
These inline functions immediately exploit the static ioremaps for the queue manager memory region. This does not work with multiplatform where everything need to be dynamically remapped, so get rid of these inlines and create new exports for those used by other drivers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23soc: ixp4xx: npe: Pass addresses as resourcesLinus Walleij1-16/+20
Instead of using hardcoded base addresses implicitly obtained through <linux/io.h>, pass the physical base for the three NPE blocks as memory resources and remap these in the driver. Drop the memory request region business, this will anyways be done by devm_* remapping functions. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23ARM: ixp4xx: Turn the QMGR into a platform deviceLinus Walleij1-8/+13
Instead of registering everything related to the QMGR unconditionally in the module_init() call (which will never work with multiplatform) create a platform device and probe the QMGR like any other device. Put the device second in the list of devices added for the platform so it is there when the dependent network and crypto drivers probe later on. This probe() path will not be taken unconditionally on device tree boots, so remove the DT guard. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23ARM: ixp4xx: Turn the NPE into a platform deviceLinus Walleij1-10/+13
Instead of registering everything related to the NPE unconditionally in the module_init() call (which will never work with multiplatform) create a platform device and probe the NPE like any other device. Put the device first in the list of devices added for the platform so it is there when the dependent network and crypto drivers probe later on. This probe() path will not be taken unconditionally on device tree boots, so remove the DT guard. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23ARM: ixp4xx: Move IXP4xx QMGR and NPE headersLinus Walleij2-2/+2
This moves the IXP4xx Queue Manager and Network Processing Engine headers out of the <mack/*> include path as that is incompatible with multiplatform. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23ARM: ixp4xx: Move NPE and QMGR to drivers/socLinus Walleij6-0/+1149
The Network Processing Engine and Queue Manager are versatile firmware components used by several IXP4xx drivers. Drivers are relying on getting access to these components using <mach/*> headers which does not work with multiplatform. We need to find a better place for the drivers to live. Let's first move them to drivers/soc and the start to refactor a bit by passing resources and moving headers. This patch introduce static IRQ assignments but that will be fixed by later patches in this series. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-20soc: imx: Add generic i.MX8 SoC driverAbel Vesa2-0/+116
Add generic i.MX8 SoC driver along with the i.MX8MQ SoC specific code. For now, only i.MX8MQ revision B1 is supported. For any other, i.MX8MQ revision it will print 'unknown'. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-17soc/tegra: pmc: Move powergate initialisation to probeJon Hunter1-15/+68
Commit 8df127456f29 ("soc/tegra: pmc: Enable XUSB partitions on boot") was added as a workaround to ensure that the XUSB powergates or domains were turned on early during boot because as this time the Tegra XHCI driver did not handle the power domains at all. Now that the Tegra XHCI driver has been updated to properly managed the power domains, the workaround to enable the XUSB power domain early has been removed. This also means that we can now move the initialisation of the powergates into the PMC driver probe. Therefore, move the powergate initialisation into the PMC driver probe and return any errors detected. To handle any errors, functions to cleanup and remove any power-domains registered with the generic power-domain framework have been added. Finally the initialisation of the 'powergates_available' bitmask is kept in the PMC early init function to allow the legacy PMC powergate APIs to be called during early boot for enabling secondary CPUs on 32-bit Tegra devices. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17soc/tegra: pmc: Remove reset sysfs entries on errorJon Hunter1-1/+4
Commit 5f84bb1a4099 ("soc/tegra: pmc: Add sysfs entries for reset info") added sysfs entries for Tegra reset source and level. However, these sysfs are not removed on error and so if the registering of PMC device is probe deferred, then the next time we attempt to probe the PMC device warnings such as the following will be displayed on boot ... sysfs: cannot create duplicate filename '/devices/platform/7000e400.pmc/reset_reason' Fix this by calling device_remove_file() for each sysfs entry added on failure. Note that we call device_remove_file() unconditionally without checking if the sysfs entry was created in the first place, but this should be OK because kernfs_remove_by_name_ns() will fail silently. Fixes: 5f84bb1a4099 ("soc/tegra: pmc: Add sysfs entries for reset info") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17soc/tegra: pmc: Fix reset sources and levelsJon Hunter1-15/+29
Commit 5f84bb1a4099 ("soc/tegra: pmc: Add sysfs entries for reset info") added support for reading the Tegra reset source and level from sysfs. However, there are a few issues with this commit which are ... 1. The number of reset sources for Tegra210 is defined as 5 but it should be 6. 2. The number of reset sources for Tegra186 is defined as 13 but it should be 15. 3. The SoC data variables num_reset_sources and num_reset_levels are defined but never used. Fix the above by ... 1. Removing the reset source 'AOTAG' from the tegra30_reset_sources because this is only applicable for Tegra210. 2. Adding a new tegra210_reset_sources structure for Tegra210 reset sources. 3. Correct the number of reset sources for Tegra210 and Tegra186 by using the ARRAY_SIZE macro. 4. Updating the functions reset_reason_show() and reset_level_show() to check whether the value read is valid. While we are at it clean-up these functions to remove an unnecessary u32 variable. Fixes: 5f84bb1a4099 ("soc/tegra: pmc: Add sysfs entries for reset info") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-16soc: amlogic: meson-gx-pwrc-vpu: Add support for G12ANeil Armstrong1-12/+140
The Amlogic G12A SoC has a very similar VPU Power Controller setup than the older GXBB, GXL & GXm SoCs. This patch adds the variant support for G12A. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-04-16soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmaskNeil Armstrong1-4/+4
The register bitmask to power on/off the VPU memories was incorectly set to 0x2 instead of 0x3. While still working, let's use the recommended vendor value instead. Fixes: 75fcb5ca4b46 ("soc: amlogic: add Meson GX VPU Domains driver") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-04-12soc: mediatek: pwrap: Zero initialize rdata in pwrap_init_cipherNathan Chancellor1-1/+1
When building with -Wsometimes-uninitialized, Clang warns: drivers/soc/mediatek/mtk-pmic-wrap.c:1358:6: error: variable 'rdata' is used uninitialized whenever '||' condition is true [-Werror,-Wsometimes-uninitialized] If pwrap_write returns non-zero, pwrap_read will not be called to initialize rdata, meaning that we will use some random uninitialized stack value in our print statement. Zero initialize rdata in case this happens. Link: https://github.com/ClangBuiltLinux/linux/issues/401 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-04-12soc: mediatek: pwrap: add support for MT8516 pwrapFabien Parent1-0/+106
Add the code to support the pwrap IP on the MediaTek MT8516 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-04-12soc: mediatek: pwrap: add missing check on rstcFabien Parent1-1/+2
The variable rstc is set only when the SoC PWRAP have the PWRAP_CAP_RESET capability. Check whether rstc is set before using it to avoid errors. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-04-11soc: rockchip: Set the proper PWM for rk3288Douglas Anderson1-0/+2
The rk3288 SoC has two PWM implementations available, the "old" implementation and the "new" one. You can switch between the two of them by flipping a bit in the grf. The "old" implementation is the default at chip power up but isn't the one that's officially supposed to be used. ...and, in fact, the driver that gets selected in Linux using the rk3288 device tree only supports the "new" implementation. Long ago I tried to get a switch to the right IP block landed in the PWM driver (search for "rk3288: Switch to use the proper PWM IP") but that got rejected. In the mean time the grf has grown a full-fledged driver that already sets other random bits like this. That means we can now get the fix landed. For those wondering how things could have possibly worked for the last 4.5 years, folks have mostly been relying on the bootloader to set this bit. ...but occasionally folks have pointed back to my old patch series [1] in downstream kernels. [1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1391597.html Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11soc: imx: gpcv2: use devm_platform_ioremap_resource() to simplify codeAnson Huang1-3/+1
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-11soc: imx: gpc: use devm_platform_ioremap_resource() to simplify codeAnson Huang1-3/+1
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-09drivers: soc: qcom: rpmh-rsc: Correct check for slot numberMaulik Shah1-1/+1
The return index value from bitmap_find_next_zero_area can be higher than available slot. So correct the check to return error in such case. Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Reviewed-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-08soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh supportKeerthy2-11/+185
During RTC-only suspend, power is lost to the wkup domain, so we need to save and restore the state of that domain. We also need to store some information within the RTC registers so that u-boot can do the right thing at powerup. The state is entered by getting the RTC to bring the pmic_power_en line low which will instruct the PMIC to disable the appropriate power rails after putting DDR into self-refresh mode. To bring pmic_power_en low, we need to get an ALARM2 event. Since we are running from SRAM at that point, it means calculating what the next second is (via ASM) and programming that into the RTC. This patch also adds support for wake up source detection. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08soc: ti: pm33xx: Move the am33xx_push_sram_idle to the topKeerthy1-50/+50
Move the am33xx_push_sram_idle function to the top as a preparation for rtc+ddr mode as the function will be called by multiple functions currently present before it. No functional changes. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-02soc/fsl/qe: Fix an error code in qe_pin_request()Dan Carpenter1-1/+3
We forgot to set "err" on this error path. Fixes: 1a2d397a6eb5 ("gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-03-27soc: qcom: cmd-db: Fix an error code in cmd_db_dev_probe()Dan Carpenter1-2/+2
The memremap() function doesn't return error pointers, it returns NULL. This code is returning "ret = PTR_ERR(NULL);" which is success, but it should return -ENOMEM. Fixes: 312416d9171a ("drivers: qcom: add command DB driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>