summaryrefslogtreecommitdiffstats
path: root/drivers/soc/ti
AgeCommit message (Collapse)AuthorFilesLines
2016-11-30soc: ti: qmss: fix the case when !SMPGrygorii Strashko1-1/+1
The irq_set_affinity_hint() will always fail when !SMP and Networking will fail on Keystone 2 devices in this case. Hence, fix by ignoring IRQ affinity settings when !SMP. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-26soc: TI knav_qmss: fix dma_addr_t printingArnd Bergmann3-20/+20
The knav_qmss driver is currently broken when CONFIG_LPAE is set, which is a bit surprising because I'd expect that any serious users of this platforms would have more than 2GB of RAM and require LPAE. The compiler clearly warns about an incorrect use of dma_addr_t in the debug kernel messages: ti/knav_qmss_queue.c: In function 'knav_queue_setup_region': ti/knav_qmss_queue.c:1025:117: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=] ti/knav_qmss_queue.c:1025:117: warning: format '%x' expects argument of type 'unsigned int', but argument 10 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=] ti/knav_qmss_queue.c: In function 'knav_queue_setup_link_ram': ti/knav_qmss_queue.c:1175:118: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=] This patch changes all the debugging output to use the correct %pad format string that works with both 32-bit and 64-bit dma_addr_t. As the variable naming is somewhat confusing here, I also change all *_phys names to *_dma when they refer to bus addresses that are used for DMA rather than a physical memory address as seen from the CPU. This is particularly important on keystone, because the two things are not the same there. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-20Merge tag 'armsoc-drivers' of ↵Linus Torvalds3-0/+519
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
2016-01-14Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: floppy: make local variable non-static exynos: fixes an incorrect header guard dt-bindings: fixes some incorrect header guards cpufreq-dt: correct dead link in documentation cpufreq: ARM big LITTLE: correct dead link in documentation treewide: Fix typos in printk Documentation: filesystem: Fix typo in fs/eventfd.c fs/super.c: use && instead of & for warn_on condition Documentation: fix sysfs-ptp lib: scatterlist: fix Kconfig description
2015-12-22Merge tag 'omap-for-v4.5/wakeup-m3' of ↵Olof Johansson3-0/+519
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers TI wakeup M3 IPC device driver for v4.5 merge window. This driver will eventually allow am33xx and am437x to support PM with their Cortex-M3 power management processor. This driver has been waiting to get merged for quite a while but has had dependencies to the remoteproc that are now out of the way. * tag 'omap-for-v4.5/wakeup-m3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: Add wkup_m3_ipc driver Documentation: dt: add bindings for TI Wakeup M3 IPC device Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-08treewide: Fix typos in printkMasanari Iida1-1/+1
This patch fix multiple spelling typos found in various part of kernel. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-03soc: ti: Add wkup_m3_ipc driverDave Gerlach3-0/+519
Introduce a wkup_m3_ipc driver to handle communication between the MPU and Cortex M3 wkup_m3 present on am335x. This driver is responsible for actually booting the wkup_m3_rproc and also handling all IPC which is done using the IPC registers in the control module, a mailbox, and a separate interrupt back from the wkup_m3. A small API is exposed for executing specific power commands, which include configuring for low power mode, request a transition to a low power mode, and status info on a previous transition. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-23soc: ti: knav_qmss_queue: Fix linking RAM setup for queue managersMichal Morawiec1-1/+1
Configure linking RAM for both queue managers also in case when only linking RAM 0 is specified in device tree. Currently hwqueue driver configures linking RAM(s) to be used cooperatively by the QMs (shared mode). Therefore if both queue managers are used then both must be configured with exactly the same linking RAM info (base address and size) independent of the number of linking RAM(s) specified in the device tree. For proper operation only one linking RAM is required and in most cases this can be internal one as long as it is able to handle the number of descriptors used in the system. Current driver code however skips configuration of second queue manager if second linking RAM is not specified. If the configuration for the QM2 is missing there will be a crash when it tries to push/pop descriptors from its queues. Signed-off-by: Michal Morawiec <michal.1.morawiec.ext@nokia.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-11-23soc: ti: use request_firmware_direct() as acc firmware is optionalMurali Karicheri1-3/+3
When firmware image for PDSP firmware is absent in the file system the kernel boot with ramfs/nfs is stuck for 60 seconds being the the default timeout. request_firmware_direct() is to take care of such optional firmware loading and hence replace the call in the driver with this API. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-11-10Merge tag 'armsoc-soc' of ↵Linus Torvalds3-27/+53
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "New and/or improved SoC support for this release: Marvell Berlin: - Enable standard DT-based cpufreq - Add CPU hotplug support Freescale: - Ethernet init for i.MX7D - Suspend/resume support for i.MX6UL Allwinner: - Support for R8 chipset (used on NTC's $9 C.H.I.P board) Mediatek: - SMP support for some platforms Uniphier: - L2 support - Cleaned up SMP support, etc. plus a handful of other patches around above functionality, and a few other smaller changes" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) ARM: uniphier: rework SMP operations to use trampoline code ARM: uniphier: add outer cache support Documentation: EXYNOS: Update bootloader interface on exynos542x ARM: mvebu: add broken-idle option ARM: orion5x: use mac_pton() helper ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned ARM: sunxi: Add R8 support ARM: digicolor: select pinctrl/gpio driver arm: berlin: add CPU hotplug support arm: berlin: use non-self-cleared reset register to reset cpu ARM: mediatek: add smp bringup code ARM: mediatek: enable gpt6 on boot up to make arch timer working soc: mediatek: Fix random hang up issue while kernel init soc: ti: qmss: make acc queue support optional in the driver soc: ti: add firmware file name as part of the driver Documentation: dt: soc: Add description for knav qmss driver ARM: S3C64XX: Use PWM lookup table for mach-smartq ARM: S3C64XX: Use PWM lookup table for mach-hmt ARM: S3C64XX: Use PWM lookup table for mach-crag6410 ARM: S3C64XX: Use PWM lookup table for smdk6410 ...
2015-10-13soc: ti: qmss: make acc queue support optional in the driverMurali Karicheri3-7/+25
acc channels are available only if accumulator PDSP is loaded and running in the SoC. As this requires firmware and user may not have firmware in the file system, make the accumulator queue support available in qmss driver optional. To use accumulator queus user needs to add firmware to the file system and boot up kernel. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-10-13soc: ti: add firmware file name as part of the driverMurali Karicheri2-20/+28
Currently firmware file name is included in the DTS. This is not scalable as user has to change the DTS if they need upgrade to a new firmware. Instead, add the firmware file name in the driver itself. As long as there is no API change, new firmware upgrade is easy and require no driver change. User is expected to copy the firmware image to the file system and add a sym link to the new firmware for doing an upgrade. Driver add a array of firmware file names to search for the available firmware blobs. This scheme also prepare the driver for future changes to API if ever happens. In such case it is assumed that driver needs to change to accommodate the new firmware and new firmware file name will get added to the array. Also update the DT document to remove the firmware attribute and add description about firmware in the driver documentation. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-10-08soc: ti: reset irq affinity before freeing irqMurali Karicheri1-0/+4
When using accumulator queue for rx side for network driver, following warning is seen when doing a reboot command from Linux console. This is because, affinity value is not reset before calling free_irq(). This patch fixes this. Deconfiguring network interfaces... ------------[ cut here ]----------- WARNING: CPU: 0 PID: 2081 at kernel/irq/manage.c:1370 __free_irq+0x208/0x214 Modules linked in: CPU: 0 PID: 2081 Comm: ifconfig Not tainted 4.1.5-00908-g1049e206-dirty #1 Hardware name: Keystone Backtrace: [<c0012b98>] (dump_backtrace) from [<c0012dbc>] (show_stack+0x18/0x1c) r7:c005d0a8 r6:c06e2184 r5:c06e2184 r4:00000000 [<c0012da4>] (show_stack) from [<c04e7168>] (dump_stack+0x8c/0xcc) [<c04e70dc>] (dump_stack) from [<c0025944>] (warn_slowpath_common+0x88/0xb8) r7:c005d0a8 r6:0000055a r5:00000009 r4:0000000 [<c00258bc>] (warn_slowpath_common) from [<c0025a18>] (warn_slowpath_null+0x 24/0x2c) r8:0000006c r7:ee513f60 r6:ee513f00 r5:ee611010 r4:cc873a00 (warn_slowpath_null) from [<c005d0a8>] (__free_irq+0x208/0x214) [<c005cea0>] (__free_irq) from [<c005d158>] (free_irq+0x54/0xac) r10:00000002 r9:00000000 r8:00000000 r7:ee611010 r6:0000006c r5:00000000 r4:ee513f00 r3:00000000 [<c005d104>] (free_irq) from [<c02a81b0>] (knav_range_setup_acc_irq+0xb0/0x1 28) r7:00000001 r6:0000006c r5:ee611010 r4:00000001 [<c02a8100>] (knav_range_setup_acc_irq) from [<c02a8248>] (knav_acc_close_qu eue+0x20/0x24) r8:edd1a4c8 r7:00001000 r6:eed89980 r5:ee616650 r4:edf9d990 [<c02a8228>] (knav_acc_close_queue) from [<c02a6160>] (knav_queue_close+0xb4 /0xb8) [<c02a60ac>] (knav_queue_close) from [<c0336270>] (netcp_free_navigator_reso urces+0x1d4/0x2c0) r5:edd1a480 r4:00000400 [<c033609c>] (netcp_free_navigator_resources) from [<c033657c>] (netcp_ndo_stop+0x220/0x230) r10:00008914 r9:edf34400 r8:00000000 r7:edd1a5d8 r6:edd1a480 r5:00000400 r4:edd1a000 [<c033635c>] (netcp_ndo_stop) from [<c03d9c80> (__dev_close_many+0x90/0xd8) r7:00001003 r6:00001042 r5:edb0de20 r4:edd1a000 [<c03d9bf0>] (__dev_close_many) from [<c03d9df4>] (__dev_close+0x30/0x48) r5:00000001 r4:edd1a000 [<c03d9dc4>] (__dev_close) from [<c03e175c>] (__dev_change_flags+0x9c/0x14c) [<c03e16c0>] (__dev_change_flags) from [<c03e182c>] (dev_change_flags+0x20/0 r9:edf34400 r8:00000000 r7:00000000 r6:00001003 r5:edd1a138 r4:edd1a000 [<c03e180c>] (dev_change_flags) from [<c0446f94>] (devinet_ioctl+0x680/0x754 r9:edf34400 r8:bef6af3c r7:00000000 r6:bef6ac64 r5:edf3440c r4:00000000 [<c0446914>] (devinet_ioctl) from [<c0448760>] (inet_ioctl+0x1a8/0x1d0) r10:00000000 r9:edb0c000 r8:bef6ac64 r7:00000003 r6:bef6ac64 r5:bef6ac64 r4:00008914 [<c04485b8>] (inet_ioctl) from [<c03c72fc>] (sock_ioctl+0x1d0/0x2a8) [<c03c712c>] (sock_ioctl) from [<c00eb608>] (do_vfs_ioctl+0x414/0x604) r7:00000003 r6:ed8b60c0 r5:bef6ac64 r4:ccc88f20 [<c00eb1f4>] (do_vfs_ioctl) from [<c00eb834>] (SyS_ioctl+0x3c/0x64) r9:edb0c000 r8:bef6ac64 r7:00008914 r6:ed8b60c0 r5:00000003 r4:ed8b60c0 [<c00eb7f8>] (SyS_ioctl) from [<c000f780>] (ret_fast_syscall+0x0/0x3c) r9:edb0c000 r8:c000f924 r7:00000036 r6:0007e77c r5:bef6ac64 r4:0007e7d0 ---[ end trace f565594c905af0b4 ]--- Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-01-29soc: ti: knav_qmss_queue: change knav_range_setup_acc_irq to staticMurali Karicheri1-1/+1
knav_range_setup_acc_irq() is used only within the file and should be defined as static. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-01-29soc: ti: knav_qmss_queue: makefile tweak to build as dynamic moduleMurali Karicheri1-1/+2
Currently configuring qmss and dma as dynamic module creates three .ko files. knav_qmss_acc.ko and knav_qmss_queue.ko both can't be insmod because of circular dependency. So combine these two into one module by changing the makefile. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-01-29soc: ti: knav_qmss_queue: export API calls for use by user driverMurali Karicheri1-0/+9
Currently only few of the API calls are exported. This creates problem when the knav* modules are built as modules and another user module such as netcp_core try to use these API calls and they are also built as module. This patch export these APIs to address the issue. This is needed to support allmodconfig for ARM Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-03soc: ti: knav_qmss_queue: Use list_for_each_entry_safe to prevent use after freeAxel Lin1-2/+2
list_for_each_entry_safe() is necessary if list objects are deleted from the list while traversing it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-10-27soc: ti: knav_qmss_queue: Return proper error if devm_kzalloc failsAxel Lin1-1/+1
Return -ENOMEM if devm_kzalloc fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-10-27soc: ti: knav_qmss_queue: Fix unbalanced locking ins knav_pool_create()Axel Lin1-3/+4
Don't call mutex_unlock() in the error patch if the mutex_lock() is not called. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-10-27soc: ti: Use list_first_entry_or_null() at appropriate placesAxel Lin1-4/+4
Use list_first_entry_or_null() for first_region() and first_queue_range(). list_first_entry() expects the list is not empty, so first_region() and first_queue_range() never return NULL. Thus use list_first_entry_or_null() instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2014-10-20soc: ti: drop owner assignment from platform_driversWolfram Sang2-2/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-24soc: ti: add Keystone Navigator DMA supportSantosh Shilimkar3-0/+826
The Keystone Navigator DMA driver sets up the dma channels and flows for the QMSS(Queue Manager SubSystem) who triggers the actual data movements across clients using destination queues. Every client modules like NETCP(Network Coprocessor), SRIO(Serial Rapid IO) and CRYPTO Engines has its own instance of packet dma hardware. QMSS has also an internal packet DMA module which is used as an infrastructure DMA with zero copy. Initially this driver was proposed as DMA engine driver but since the hardware is not typical DMA engine and hence doesn't comply with typical DMA engine driver needs, that approach was naked. Link to that discussion - https://lkml.org/lkml/2014/3/18/340 As aligned, now we pair the Navigator DMA with its companion Navigator QMSS subsystem driver. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sandeep Nair <sandeep_n@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-09-24soc: ti: add Keystone Navigator QMSS driverSandeep Nair5-0/+2818
The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of the main hardware sub system which forms the backbone of the Keystone Multi-core Navigator. QMSS consist of queue managers, packed-data structure processors(PDSP), linking RAM, descriptor pools and infrastructure Packet DMA. The Queue Manager is a hardware module that is responsible for accelerating management of the packet queues. Packets are queued/de-queued by writing or reading descriptor address to a particular memory mapped location. The PDSPs perform QMSS related functions like accumulation, QoS, or event management. Linking RAM registers are used to link the descriptors which are stored in descriptor RAM. Descriptor RAM is configurable as internal or external memory. The QMSS driver manages the PDSP setups, linking RAM regions, queue pool management (allocation, push, pop and notify) and descriptor pool management. The specifics on the device tree bindings for QMSS can be found in: Documentation/devicetree/bindings/soc/keystone-navigator-qmss.txt Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sandeep Nair <sandeep_n@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 15:47:31 +0000