summaryrefslogtreecommitdiffstats
path: root/drivers/soc/qcom
AgeCommit message (Collapse)AuthorFilesLines
2022-08-18soc: qcom: icc-bwmon: store count unit per variantKrzysztof Kozlowski1-7/+8
Versions v4 and v5 of BWMON on SDM845 use different unit count, so allow easier variant customization by storing its value in struct icc_bwmon_data. Cc: Rajendra Nayak <quic_rjendra@quicinc.com> Cc: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220728113748.170548-7-krzysztof.kozlowski@linaro.org
2022-08-18soc: qcom: icc-bwmon: clear all registers on initKrzysztof Kozlowski1-4/+9
The hardware programming guide recommends to clear all registers on first initialization, through separate field in BWMON_CLEAR register. This makes sense in general but especially if driver is rebound to avoid spurious/early interrupts. Cc: Rajendra Nayak <quic_rjendra@quicinc.com> Cc: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220728113748.170548-6-krzysztof.kozlowski@linaro.org
2022-08-18soc: qcom: icc-bwmon: store reference to variant data in containerKrzysztof Kozlowski1-12/+8
Instead of copying pieces of variant-specific data (struct icc_bwmon_data) into the state container (struct icc_bwmon), just store a pointer to it. This simplifies a bit the code and allows later to grow easily the variant-specific data for new BWMON v5. Cc: Rajendra Nayak <quic_rjendra@quicinc.com> Cc: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220728113748.170548-5-krzysztof.kozlowski@linaro.org
2022-08-18soc: qcom: icc-bwmon: drop unused registersKrzysztof Kozlowski1-2/+0
BWMON_GLOBAL_IRQ_STATUS and BWMON_ZONE_COUNT defines are not used. Cc: Rajendra Nayak <quic_rjendra@quicinc.com> Cc: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220728113748.170548-4-krzysztof.kozlowski@linaro.org
2022-08-18soc: qcom: icc-bwmon: re-use IRQ enable/clear defineKrzysztof Kozlowski1-1/+2
The interrupt enable, status and clear registers have the same layout, so BWMON_GLOBAL_IRQ_ENABLE_ENABLE define can be used also for clearing IRQ, instead of hard-coded value. Cc: Rajendra Nayak <quic_rjendra@quicinc.com> Cc: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220728113748.170548-3-krzysztof.kozlowski@linaro.org
2022-08-05Merge tag 'asm-generic-6.0' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are three independent sets of changes: - Sai Prakash Ranjan adds tracing support to the asm-generic version of the MMIO accessors, which is intended to help understand problems with device drivers and has been part of Qualcomm's vendor kernels for many years - A patch from Sebastian Siewior to rework the handling of IRQ stacks in softirqs across architectures, which is needed for enabling PREEMPT_RT - The last patch to remove the CONFIG_VIRT_TO_BUS option and some of the code behind that, after the last users of this old interface made it in through the netdev, scsi, media and staging trees" * tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: uapi: asm-generic: fcntl: Fix typo 'the the' in comment arch/*/: remove CONFIG_VIRT_TO_BUS soc: qcom: geni: Disable MMIO tracing for GENI SE serial: qcom_geni_serial: Disable MMIO tracing for geni serial asm-generic/io: Add logging support for MMIO accessors KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM lib: Add register read/write tracing support drm/meson: Fix overflow implicit truncation warnings irqchip/tegra: Fix overflow implicit truncation warnings coresight: etm4x: Use asm-generic IO memory barriers arm64: io: Use asm-generic high level MMIO accessors arch/*: Disable softirq stacks on PREEMPT_RT.
2022-08-02Merge tag 'arm-drivers-6.0' of ↵Linus Torvalds15-17/+484
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC drivers from Arnd Bergmann: "The SoC driver updates contain changes to improve support for additional SoC variants, as well as cleanups an minor bugfixes in a number of existing drivers. Notable updates this time include: - Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers - Updates for interconnect drivers on Qualcomm Snapdragon - A new driver support for NMI interrupts on Fujitsu A64fx - A rework of Broadcom BCMBCA Kconfig dependencies - Improved support for BCM2711 (Raspberry Pi 4) power management to allow the use of the V3D GPU - Cleanups to the NXP guts driver - Arm SCMI firmware driver updates to add tracing support, and use the firmware interfaces for system power control and for power capping" * tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits) soc: a64fx-diag: disable modular build dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config ARM: mach-qcom: Add support for MSM8909 dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method soc: qcom: spm: Add CPU data for MSM8909 dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible soc: qcom: rpmpd: Add compatible for MSM8909 dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains soc: qcom: smd-rpm: Add compatible for MSM8909 dt-bindings: soc: qcom: smd-rpm: Add MSM8909 soc: qcom: icc-bwmon: Remove unnecessary print function dev_err() soc: fujitsu: Add A64FX diagnostic interrupt driver soc: qcom: socinfo: Fix the id of SA8540P SoC soc: qcom: Make QCOM_RPMPD depend on PM tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA ...
2022-07-18soc: qcom: spm: Add CPU data for MSM8909Stephan Gerhold1-0/+14
Given the lack of public documentation for the SPM, the configuration data is taken without modification from Qualcomm's msm-3.10 release [1]. It is pretty much identical to the one for MSM8916, except that 0x3B is missing in the sequence for standalone power collapse for some reason. [1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.3-00910-8x09.0/arch/arm/boot/dts/qcom/msm8909-pm8909-pm.dtsi Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220705143523.3390944-7-stephan.gerhold@kernkonzept.com
2022-07-18soc: qcom: rpmpd: Add compatible for MSM8909Stephan Gerhold1-0/+1
MSM8909 has the same power domains as MSM8916, so just define another compatible for the existing definition. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220705143523.3390944-5-stephan.gerhold@kernkonzept.com
2022-07-18soc: qcom: smd-rpm: Add compatible for MSM8909Stephan Gerhold1-0/+1
Add the new "qcom,rpm-msm8909" compatible to the driver so the interface to the Resource Power Manager (RPM) is initialized correctly on MSM8909. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220705143523.3390944-3-stephan.gerhold@kernkonzept.com
2022-07-18soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()Yang Li1-3/+1
Eliminate the follow coccicheck warning: ./drivers/soc/qcom/icc-bwmon.c:349:2-9: line 349 is redundant because platform_get_irq() already prints an error Fixes: b9c2ae6cac40 ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220714075532.104665-1-yang.lee@linux.alibaba.com
2022-07-16soc: qcom: socinfo: Fix the id of SA8540P SoCParikshit Pareek1-1/+2
Change the id of SA8540P to its correct value, i.e., 461. Also, map the id 460 to its correct values, i.e. SA8295P. Fixes: 76ee15ae1b13 ("soc: qcom: socinfo: Add some more PMICs and SoCs") Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com> Reviewed-by: Eric Chanudet <echanude@redhat.com> Tested-by: Eric Chanudet <echanude@redhat.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220711083957.12091-1-quic_ppareek@quicinc.com
2022-07-16soc: qcom: Make QCOM_RPMPD depend on PMKonrad Dybcio1-0/+1
QCOM_RPMPD requires PM_GENERIC_DOMAINS/_OF, which in turns requires CONFIG_PM. I forgot about the latter in my earlier patch (it's still in -next as of the time of committing, hence no Fixes: tag). Fix it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220707212158.32684-1-konrad.dybcio@somainline.org
2022-07-06soc: qcom: icc-bwmon: Add bandwidth monitoring driverKrzysztof Kozlowski3-0/+437
Bandwidth monitoring (BWMON) sits between various subsytems like CPU, GPU, Last Level caches and memory subsystem. The BWMON can be configured to monitor the data throuhput between memory and other subsytems. The throughput is measured within specified sampling window and is used to vote for corresponding interconnect bandwidth. Current implementation brings support for BWMON v4, used for example on SDM845 to measure bandwidth between CPU (gladiator_noc) and Last Level Cache (memnoc). Usage of this BWMON allows to remove fixed bandwidth votes from cpufreq (CPU nodes) thus achieve high memory throughput even with lower CPU frequencies. The driver was tested on SDM845. Co-developed-by: Thara Gopinath <thara.gopinath@gmail.com> Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220704121730.127925-3-krzysztof.kozlowski@linaro.org
2022-07-05soc/qcom: Make QCOM_RPMPD select PM_GENERIC_DOMAINS/_OFKonrad Dybcio1-0/+2
The driver uses generic genpd OF APIs and with a very minimal config where nothing else selects them, this driver will not probe, as of_genpd_add_provider_onecell will return -EOPNOTSUPP. Make sure to select these in Kconfig to prevent that. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220701073700.17124-1-konrad.dybcio@somainline.org
2022-07-04soc: qcom: smem: use correct format charactersBill Wendling1-3/+3
When compiling with -Wformat, clang emits the following warnings: drivers/soc/qcom/smem.c:847:41: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] dev_err(smem->dev, "bad host %hu\n", remote_host); ~~~ ^~~~~~~~~~~ %u ./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err' dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__) ~~~ ^~~~~~~~~~~ ./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap' _p_func(dev, fmt, ##__VA_ARGS__); \ ~~~ ^~~~~~~~~~~ drivers/soc/qcom/smem.c:852:47: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] dev_err(smem->dev, "duplicate host %hu\n", remote_host); ~~~ ^~~~~~~~~~~ %u ./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err' dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__) ~~~ ^~~~~~~~~~~ ./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap' _p_func(dev, fmt, ##__VA_ARGS__); \ ~~~ ^~~~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct one and change type of remote_host to "u16" to match with other types. Signed-off-by: Bill Wendling <morbo@google.com> Tested-by: Justin Stitt <jstitt007@gmail.com> Reviewed-by: Justin Stitt <jstitt007@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-30soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_registerMiaoqian Lin1-1/+3
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. When breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the child node. Add missing of_node_put() to avoid refcount leak. Fixes: 05589b30b21a ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220606064252.42595-1-linmq006@gmail.com
2022-06-30soc: qcom: llcc: Fix syntax errors in commentsXiang wangx1-1/+1
Delete the redundant word 'and'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220604142327.14714-1-wangxiang@cdjrlc.com
2022-06-30soc: qcom: ocmem: Fix refcount leak in of_get_ocmemMiaoqian Lin1-0/+3
of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() will check NULL pointer. Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220602042430.1114-1-linmq006@gmail.com
2022-06-28soc: qcom: cmd-db: replace strscpy_pad() with strncpy()Douglas Anderson1-3/+7
Commit ac0126a01735 ("soc: qcom: cmd-db: replace strncpy() with strscpy_pad()") breaks booting on my sc7280-herobrine-herobrine device. From printouts I see that at bootup the function is called with an id of "lnbclka2" which is 8 bytes big. Previously all 8 bytes of this string were copied to the destination. Now only 7 bytes will be copied since strscpy_pad() saves a byte for '\0' termination. We don't need the '\0' termination in the destination. Let's go back to strncpy(). According to the warning: If a caller is using non-NUL-terminated strings, strncpy() can still be used, but destinations should be marked with the __nonstring attribute to avoid future compiler warnings. ...so we'll do that. While we're at it, let's change the query array to use "sizeof(ent->id)" so it can't possibly go out of sync with our later copy. Fixes: ac0126a01735 ("soc: qcom: cmd-db: replace strncpy() with strscpy_pad()") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220628064301.v3.1.Ie7b480cd99e2c13319220cbc108caf2bcd41286b@changeid
2022-06-25soc: qcom: rpmhpd: fix typos in commentJulia Lawall1-2/+2
Spelling mistakes (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521111145.81697-9-Julia.Lawall@inria.fr
2022-06-25soc: qcom: correct kerneldocKrzysztof Kozlowski2-1/+6
Correct kerneldoc warnings like: drivers/soc/qcom/mdt_loader.c:126: warning: Function parameter or member 'fw_name' not described in 'qcom_mdt_read_metadata' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220519073301.7072-2-krzysztof.kozlowski@linaro.org
2022-06-25soc: qcom: cmd-db: replace strncpy() with strscpy_pad()Krzysztof Kozlowski1-1/+1
The use of strncpy() is considered deprecated for NUL-terminated strings[1]. Replace strncpy() with strscpy_pad(), to keep existing pad-behavior of strncpy. This fixes W=1 warning: drivers/soc/qcom/cmd-db.c: In function ‘cmd_db_get_header.part.0’: drivers/soc/qcom/cmd-db.c:151:9: warning: ‘strncpy’ specified bound 8 equals destination size [-Wstringop-truncation] 151 | strncpy(query, id, sizeof(query)); [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220519073301.7072-1-krzysztof.kozlowski@linaro.org
2022-06-25soc: qcom: apr: Drop redundant check in .remove()Uwe Kleine-König1-9/+6
The remove callback is only called by the driver core if there is a driver to unbind, so there is no need to check dev->driver to be non-NULL. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220618203913.35785-1-u.kleine-koenig@pengutronix.de
2022-06-25soc: qcom: socinfo: Add an ID for sc7180PDouglas Anderson1-0/+1
Some sc7180 Chromebooks actually have sc7180P (known by many names, apparently, including possibly sc7180 Pro and sc7185). This is a sc7180 part that has slightly higher clock speeds. The official ID number allocated to these devices by Qualcomm is 495 so we'll add an entry to the table for them. Note that currently shipping BIOS for these devices will actually end up reporting an ID of 407 due to a bug but eventually a new BIOS will be released which corrects it to 495. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220523085437.v3.1.I26eca1856f99e6160d30de6d50ecab60e6226354@changeid
2022-06-15soc: qcom: geni: Disable MMIO tracing for GENI SESai Prakash Ranjan1-0/+3
Disable MMIO tracing for GENI SE driver to prevent excessive logging. Any access over serial console would involve a lot of TX and RX register accesses (and few others), so these MMIO read/write trace events in these drivers cause a lot of unwanted noise because of the high frequency of such operations and it is not very useful tracing these events for such drivers. Given we want to enable these trace events on development devices (maybe not production devices) where performance also really matters so that we don't regress other components by wasting CPU cycles and memory collecting these traces, it makes more sense to disable these traces from such drivers. Also another reason to disable these traces would be to prevent recursive tracing when we display the trace buffer containing these MMIO trace events since writing onto serial console would further record MMIO traces. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-05soc: qcom: pdr: use static for servreg_* variablesTom Rix1-10/+10
Sparse reports this repesentative issue pdr_internal.h:31:22: warning: symbol 'servreg_location_entry_ei' was not declared. Should it be static? Similar for other servreg_* Global variables should not be defined in header files. This only works because pdr_internal.h is only included by pdr_interface.c. Single file use variables should be static so add static to their storage-class specifiers. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220422173806.21982-1-trix@redhat.com
2022-05-04soc: qcom: llcc: Add sc8180x and sc8280xp configurationsBjorn Andersson1-0/+60
Add LLCC configuration data for the SC8180X and SC8280XP platforms, based on the downstream tables. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Link: https://lore.kernel.org/r/20220502215406.612967-3-bjorn.andersson@linaro.org
2022-04-28soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domainsBjorn Andersson1-0/+53
The Qualcomm sc8280xp platform has 13 and the sa8540p platform has 11 power-domains. Add compatibles, the typically used ones power-domains and their relevant active-only variants, to the RPMh power-domain driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220426233508.1762345-4-bjorn.andersson@linaro.org
2022-04-28soc: qcom: rpmhpd: Don't warn about sparse rpmhpd arraysBjorn Andersson1-3/+1
In some cases the DT binding will fully describe the set of available RPMh power-domains, but there is no reason for exposing them all in the implementation. Omitting individual data->domains is handle gracefully by of_genpd_add_provider_onecell(), so there's no reason for printing a warning when this occurs. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220426233508.1762345-3-bjorn.andersson@linaro.org
2022-04-19soc: qcom: socinfo: Sort out 8974PRO namesLuca Weiss1-12/+12
MSM8974PRO is commonly used for referring to Snapdragon 801, compared to MSM8974 which is Snapdragon 800. The Snapdragon 801 has three variants with different clock speeds, with the -AA, -AB and -AC suffix. Adjust the names in socinfo to reflect this. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220415195449.617040-1-luca@z3ntu.xyz
2022-04-12soc: qcom: smem: validate fields of shared structuresDeepak Kumar Singh1-10/+69
Structures in shared memory that can be modified by remote processors may have untrusted values, they should be validated before use. Adding proper validation before using fields of shared structures. Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1646147913-15791-2-git-send-email-quic_deesin@quicinc.com
2022-04-12soc: qcom: smem: map only partitions used by local HOSTDeepak Kumar Singh1-62/+164
SMEM driver is IO mapping complete region and CPU is doing a speculative read into a partition where local HOST does not have permission resulting in a NOC error. Map only those partitions which are accessibly to local HOST. Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1646147913-15791-1-git-send-email-quic_deesin@quicinc.com
2022-04-11soc: qcom: llcc: Add MODULE_DEVICE_TABLE()Bjorn Andersson1-0/+1
The llcc-qcom driver can be compiled as a module, but lacks MODULE_DEVICE_TABLE() and will therefore not be loaded automatically. Fix this. Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220408213336.581661-3-bjorn.andersson@linaro.org
2022-04-07soc: qcom: pdr: replace usage of found with dedicated list iterator variableJakob Koschel1-6/+5
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220324072435.63070-1-jakobkoschel@gmail.com
2022-04-07soc: qcom: rpmhpd: Add SDX65 power domainsRohit Agarwal1-0/+16
Add power domains found in Qualcomm SDX65 SoC. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1647410837-22537-5-git-send-email-quic_rohiagar@quicinc.com
2022-04-07soc: qcom: smsm: Fix missing of_node_put() in smsm_parse_ipcMiaoqian Lin1-0/+1
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220308073648.24634-1-linmq006@gmail.com
2022-04-07soc: qcom: smp2p: Fix missing of_node_put() in smp2p_parse_ipcMiaoqian Lin1-0/+1
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: 50e99641413e ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220308071942.22942-1-linmq006@gmail.com
2022-04-07soc: qcom: socinfo: Add another ID for SM8450Dmitry Baryshkov1-0/+1
Add another id for SM8450. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220228190013.1790617-1-dmitry.baryshkov@linaro.org
2022-04-07soc: qcom: socinfo: add SC7280 entry to soc_id arrayDouglas Anderson1-0/+1
Add an entry for SC7280 SoC. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220321161546.1.Ifc4270fbe9bad536f08a47696e00cca5a0714abd@changeid
2022-02-24soc: qcom: rpmpd: Add MSM8226 supportLuca Weiss1-0/+17
Add the power domains preset in MSM8226. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220220223004.507739-2-luca@z3ntu.xyz
2022-02-23soc: qcom: mdt_loader: Fix split-firmware conditionBjorn Andersson1-1/+1
The updated condition checking if a segment can be found in the loaded firmware blob, or need to be loaded from a separate file, incorrectly classifies segments that ends at the end of the loaded blob. The result is that the mdt loader attempts to load the segment from a separate file. Correct the conditional to use the loaded segment instead. Fixes: ea90330fa329 ("soc: qcom: mdt_loader: Extend check for split firmware") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220215034819.1209367-1-bjorn.andersson@linaro.org
2022-02-10soc: qcom: llcc: Add configuration data for SM8450 SoCSai Prakash Ranjan1-0/+34
Add LLCC configuration data for SM8450 SoC. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/fec944cb8f2a4a70785903c6bfec629c6f31b6a4.1643355594.git.quic_saipraka@quicinc.com
2022-02-10soc: qcom: llcc: Update register offsets for newer LLCC HWSai Prakash Ranjan1-7/+29
Newer LLCC HW have different register offsets for several registers, currently of which LLCC hardware info and status are used to identify the LLCC version information and other data. So use separate table to keep track of these register offsets which vary by different LLCC HW versions and eases any future addition in variations of register offsets for newer hardware. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/c655d16d945aef2d7fc8e7c212f3e1c58a84eb95.1643355594.git.quic_saipraka@quicinc.com
2022-02-10soc: qcom: llcc: Add missing llcc configuration dataSai Prakash Ranjan1-0/+4
Add missing llcc configuration data for few chipsets which were not added during initial post. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/143d11bacaca086406fdd10fc32f91eccd943527.1643355594.git.quic_saipraka@quicinc.com
2022-02-10soc: qcom: llcc: Add write-cache cacheable supportSai Prakash Ranjan1-0/+15
Newer SoCs with LLCC IP version 2.1.0.0 and later support write sub-cache cacheable feature. Use a separate llcc_slice_config member "write_scid_cacheable_en" to identify this feature and program LLCC_TRP_SCID_WRSC_CACHEABLE_EN register to enable it. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/83372c8178f579d055ec58212ce5af5d55abadd4.1643355594.git.quic_saipraka@quicinc.com
2022-02-10soc: qcom: llcc: Update the logic for version info extractionSai Prakash Ranjan1-4/+5
LLCC HW version info is made up of major, branch, minor and echo version bits each of which are 8bits. Several features in newer LLCC HW are based on the full version rather than just major or minor versions such as write-subcache enable which is applicable for versions v2.0.0.0 and later, also upcoming write-subcache cacheable for SM8450 SoC which is only present in versions v2.1.0.0 and later, so it makes it easier and cleaner to just directly compare with the full version than adding additional major/branch/ minor/echo version checks. So remove the earlier major version check and add full version check for those features. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/a82d7c32348c51fcc2b63e220d91b318bf706c83.1643355594.git.quic_saipraka@quicinc.com
2022-02-10soc: qcom: llcc: Add support for 16 ways of allocationHuang Yiwei1-2/+2
Add support for 16 ways of allocation for LLCC HW version 2.1.0 and later. Signed-off-by: Huang Yiwei <hyiwei@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/a7a5f64259c2c02628f03fb59b91e9fa78da2dfb.1643355594.git.quic_saipraka@quicinc.com
2022-02-10soc: qcom: socinfo: Add some more PMICs and SoCsBjorn Andersson1-0/+12
Add SM8350, SC8280XP, SA8540P and one more SM8450 and various PMICs found on boards on these platforms to the socinfo driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220210051043.748275-1-bjorn.andersson@linaro.org
2022-02-03soc: qcom: mdt_loader: Extract PAS operationsBjorn Andersson1-36/+74
Rather than passing a boolean to indicate if the PAS operations should be performed from within __mdt_load(), extract them to their own helper function. This will allow clients to invoke this directly, with some qcom_scm_pas_metadata context that they later needs to release, without further having to complicate the prototype of qcom_mdt_load(). Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220128025513.97188-9-bjorn.andersson@linaro.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 18:04:58 +0000