Age | Commit message (Collapse) | Author | Files | Lines |
|
i.MX6SX has a PCI power domain in PGC. Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
If a regulator requests a deferred probe, the power domain gets
initialized twice. This leads to a list double add (without
list debugging the kernel hangs due to the double add later):
WARNING: CPU: 0 PID: 19 at lib/list_debug.c:31 __list_add_valid+0xbc/0xc4
list_add double add: new=c1229754, prev=c12383b4, next=c1229754.
Initialize the power domain after we get the regulator. Also do
not print an error in case the regulator defers probing.
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
The i.MX drivers update for 4.13:
- Add CONFIG_HAVE_IMX_GPC to control the build of GPC driver, so that
it doesn't build for platforms that do not have it.
* tag 'imx-drivers-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpc: build gpc only if hardware has gpc
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add CONFIG_HAVE_IMX_GPC to goal definition of gpc.o,
to avoid building it for hardware that does not need it.
Signed-off-by: Marc Ohlf <ohlf@mkt-sys.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The new pm domain driver causes a build failure when CONFIG_PM
is not set:
warning: (IMX7_PM_DOMAINS) selects PM_GENERIC_DOMAINS which has unmet direct dependencies (PM)
drivers/base/power/domain_governor.c: In function 'default_suspend_ok':
drivers/base/power/domain_governor.c:75:17: error: 'struct dev_pm_info' has no member named 'ignore_children'
This adds a dependency to ensure that we don't attempt to build the
driver without CONFIG_PM.
Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
On i.MX6QP, due to hardware erratum ERR009619, the PRE clocks may be
stalled during the power up sequencing of the PU power domain. As this
may lead to a complete loss of display output, the recommended
workaround is to keep the PU domain enabled during normal system
operation.
Implement this by rejecting the domain power down request on the
affected SoC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Makes referencing a specfic domain in the driver code
less error prone.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add code allowing for control of various power domains managed by GPCv2
IP block found in i.MX7 series of SoCs. Power domains covered by this
patch are:
- PCIE PHY
- MIPI PHY
- USB HSIC PHY
- USB OTG1/2 PHY
Support for any other power domain controlled by GPC is not present, and
can be added at some later point.
Testing of this code was done against a PCIe driver.
Cc: yurovsky@gmail.com
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Dong Aisheng <dongas86@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
It is not really necessary to provide the current .readable_reg
implementation as we know what we're doing in our driver
and the regmap core has already done the partial check for
available maximum regs.
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Instead of GPC_PGC_PDN_OFFS, naming it as GPC_PGC_CTRL_OFFS which is
defined in reference manual for better reading.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The correct comment should be power up domain.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Commit 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver")
broke the MX6SL GPC power domain support.
It always got the following error:
[ 1.248364] imx-gpc 20dc000.gpc: could not find pgc DT node
This patch adds back the legecy support.
Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
ARRAY_SIZE(imx_gpc_domains) represents all power domains supported
by different SoCs. Driver should use SoC specific of_id_data->num_domains
instead to do power domain index sanity check.
e.g. MX6Q supports two power domains while MX6SL supports three.
Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver")
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Without providing the proper reg_defaults, the regmap registers first
read out may be always 0 if enabling cache, which results in the
following issue we met.
e.g. During driver probe in imx6_pm_domain_power_on():
regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val);
The PGC_PUPSCR register val is always 0 but it's actually 0xf01 in HW.
Since GPC registers are tightly related to CPU bring up and may be
changed in bootloader, we don't want to provide defaults.
And the cache really does not save too much for GPC module.
Therefore, simply disable cache to fix the issue and make life easy.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
We got a following kernel crash once supplying one more IPG
clock in GPC node in devicetree. The original error handling of
clocks get is a bit wrong that when reaching the maximum clock
get error, the index 'i' is already GPC_CLK_MAX which can't be used
as the array index for clk_put operations.
[ 3.000110] imx-gpc 20dc000.gpc: more than 6 clocks
[ 3.005141] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 3.013487] pgd = c0004000
[ 3.016300] [00000000] *pgd=00000000
[ 3.020060] Internal error: Oops: 805 [#1] SMP ARM
[ 3.024957] Modules linked in:
[ 3.028122] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.11.0-rc1-00056-g813791b-dirty #1140
[ 3.037801] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 3.044435] task: ef298000 task.stack: ef294000
[ 3.049080] PC is at __clk_put+0x38/0xec
[ 3.053103] LR is at 0x7f54ce9a
[ 3.056345] pc : [<c0537984>] lr : [<7f54ce9a>] psr: 60000013
[ 3.056345] sp : ef295d48 ip : c8a582b2 fp : ef295d64
[ 3.068026] r10: ee9fc400 r9 : 00000000 r8 : ef398c10
[ 3.073354] r7 : ef398c10 r6 : c1071264 r5 : c10710f0 r4 : eea5be80
[ 3.079986] r3 : 00000000 r2 : 00000000 r1 : 00000100 r0 : 00000001
[ 3.086621] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 3.093863] Control: 10c5387d Table: 1000404a DAC: 00000051
[ 3.099712] Process swapper/0 (pid: 1, stack limit = 0xef294210)
[ 3.105823] Stack: (0xef295d48 to 0xef296000)
...
[ 3.292660] Backtrace:
[ 3.295222] [<c053794c>] (__clk_put) from [<c0531028>] (clk_put+0x18/0x1c)
[ 3.302206] r6:c1071264 r5:c10710f0 r4:c107124c r3:00000001
[ 3.307977] [<c0531010>] (clk_put) from [<c0546ba0>] (imx_pgc_get_clocks+0x64/0x78)
[ 3.315747] [<c0546b3c>] (imx_pgc_get_clocks) from [<c0547124>] (imx_gpc_probe+0x204/0x31c)
[ 3.324209] r7:00000000 r6:c1070eb0 r5:00000001 r4:ef398c00
[ 3.329980] [<c0546f20>] (imx_gpc_probe) from [<c05e65f0>] (platform_drv_probe+0x5c/0xc0)
[ 3.338270] r10:c0f00608 r9:00000000 r8:00000000 r7:fffffdfb r6:c1070f20 r5:ef398c10
[ 3.346207] r4:ef398c10
[ 3.348849] [<c05e6594>] (platform_drv_probe) from [<c05e4250>] (driver_probe_device+0x214/0x2ec)
[ 3.357835] r7:c1070f20 r6:00000000 r5:c18cea74 r4:ef398c10
[ 3.363607] [<c05e403c>] (driver_probe_device) from [<c05e43ec>] (__driver_attach+0xc4/0xc8)
[ 3.372159] r9:c0f8b858 r8:c0f8b850 r7:00000000 r6:ef398c44 r5:c1070f20 r4:ef398c10
[ 3.380017] [<c05e4328>] (__driver_attach) from [<c05e21fc>] (bus_for_each_dev+0x7c/0xb0)
[ 3.388304] r6:c05e4328 r5:c1070f20 r4:00000000 r3:00000000
[ 3.394074] [<c05e2180>] (bus_for_each_dev) from [<c05e3bc4>] (driver_attach+0x28/0x30)
[ 3.402188] r6:c107f3e8 r5:eea5be00 r4:c1070f20
[ 3.406913] [<c05e3b9c>] (driver_attach) from [<c05e3740>] (bus_add_driver+0x19c/0x224)
[ 3.415034] [<c05e35a4>] (bus_add_driver) from [<c05e52fc>] (driver_register+0x88/0x108)
[ 3.423235] r7:c10e1000 r6:00000000 r5:c0f57d2c r4:c1070f20
[ 3.429004] [<c05e5274>] (driver_register) from [<c05e6534>] (__platform_driver_register+0x40/0x54)
[ 3.438160] r5:c0f57d2c r4:00000006
[ 3.441846] [<c05e64f4>] (__platform_driver_register) from [<c0f57d44>] (imx_gpc_driver_init+0x18/0x20)
[ 3.451360] [<c0f57d2c>] (imx_gpc_driver_init) from [<c010200c>] (do_one_initcall+0x4c/0x180)
[ 3.460008] [<c0101fc0>] (do_one_initcall) from [<c0f00e40>] (kernel_init_freeable+0x130/0x1f8)
[ 3.468820] r9:c0f8b858 r8:c0f8b850 r6:c0fc2414 r5:c10e1000 r4:00000006
[ 3.475637] [<c0f00d10>] (kernel_init_freeable) from [<c0ae6aec>] (kernel_init+0x18/0x124)
[ 3.484014] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0ae6ad4
[ 3.491951] r4:00000000
[ 3.494590] [<c0ae6ad4>] (kernel_init) from [<c01088d0>] (ret_from_fork+0x14/0x24)
[ 3.502267] r4:00000000 r3:ef294000
[ 3.505947] Code: e5943014 e5942018 e3530000 e3a01c01 (e5823000)
[ 3.512215] ---[ end trace 375f9f2a5ddeff3c ]---
[ 3.517036] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Cc: Lucas Stach <l.stach@pengutronix.de>
Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This is an almost complete re-write of the previous GPC power gating control
code found in the IMX architecture code. It supports both the old and the new
DT binding, allowing more domains to be added later and generally makes the
driver easier to extend, while keeping compatibility with existing DTBs.
As the result, all functionality regarding the power gating controller
gets removed from the IMX architecture GPC driver. It keeps only the
IRQ controller code in the architecture, as this is closely coupled to
the CPU idle implementation.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|