summaryrefslogtreecommitdiffstats
path: root/drivers/soc/bcm
AgeCommit message (Collapse)AuthorFilesLines
2021-11-15soc: bcm: brcmstb: Add of_node_put() in pm-mipsWan Jiabing1-1/+4
Fix following coccicheck warning: ./drivers/soc/bcm/brcmstb/pm/pm-mips.c:404:1-23: WARNING: Function for_each_matching_node should have of_node_put() before goto or break Early exits from for_each_matching_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-16soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72116Florian Fainelli1-0/+1
72116 uses a quad core Brahma-B53 CPU complex which uses the same tuning as done for previous chips, add that chip to the list. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-16soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72113Florian Fainelli1-0/+1
72113 uses a dual core Cortex-A72 CPU complex which requires tuning of its bus interface unit the same way that the existing Cortex-A72 based systems are tuned. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14soc: bcm63xx-power: Make use of the helper function ↵Cai Huoqing1-3/+1
devm_platform_ioremap_resource() Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-14soc: bcm: bcm-pmb: Make use of the helper function ↵Cai Huoqing1-3/+1
devm_platform_ioremap_resource() Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-07-10Merge tag 'arm-drivers-5.14' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Olof Johansson: - Reset controllers: Adding support for Microchip Sparx5 Switch. - Memory controllers: ARM Primecell PL35x SMC memory controller driver cleanups and improvements. - i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN. - Rockchip: RK3568 power domains support + DT binding updates, cleanups. - Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details, including support for MSM8226, MDM9607, SM6125 and SC8180X. - ARM FFA driver: "Firmware Framework for ARMv8-A", defining management interfaces and communication (including bus model) between partitions both in Normal and Secure Worlds. - Tegra Memory controller changes, including major rework to deal with identity mappings at boot and integration with ARM SMMU pieces. * tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits) firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string firmware: turris-mox-rwtm: show message about HWRNG registration firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng firmware: turris-mox-rwtm: report failures better firmware: turris-mox-rwtm: fix reply status decoding function soc: imx: gpcv2: add support for i.MX8MN power domains dt-bindings: add defines for i.MX8MN power domains firmware: tegra: bpmp: Fix Tegra234-only builds iommu/arm-smmu: Use Tegra implementation on Tegra186 iommu/arm-smmu: tegra: Implement SID override programming iommu/arm-smmu: tegra: Detect number of instances at runtime dt-bindings: arm-smmu: Add Tegra186 compatible string firmware: qcom_scm: Add MDM9607 compatible soc: qcom: rpmpd: Add MDM9607 RPM Power Domains soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml memory: emif: remove unused frequency and voltage notifiers memory: fsl_ifc: fix leak of private memory on probe failure memory: fsl_ifc: fix leak of IO mapping on probe failure ...
2021-07-01kernel.h: split out panic and oops helpersAndy Shevchenko1-0/+1
kernel.h is being used as a dump for all kinds of stuff for a long time. Here is the attempt to start cleaning it up by splitting out panic and oops helpers. There are several purposes of doing this: - dropping dependency in bug.h - dropping a loop by moving out panic_notifier.h - unload kernel.h from something which has its own domain At the same time convert users tree-wide to use new headers, although for the time being include new header back to kernel.h to avoid twisted indirected includes for existing users. [akpm@linux-foundation.org: thread_info.h needs limits.h] [andriy.shevchenko@linux.intel.com: ia64 fix] Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-10soc: bcm: brcmstb: remove unused variable 'brcmstb_machine_match'Jiapeng Chong1-5/+0
Fix the following clang warning: drivers/soc/bcm/brcmstb/common.c:17:34: warning: unused variable 'brcmstb_machine_match' [-Wunused-const-variable]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-04-01Merge tag 'arm-soc/for-5.13/drivers' of https://github.com/Broadcom/stblinux ↵Arnd Bergmann1-0/+30
into arm/drivers This pull request contains Broadcom ARM/ARM64/MIPS based SoCs drivers changes for 5.13, please pull the following: - Rafal updates the Broadcom PMB binding to support BCM63138 and updates the code to support resetting the 63138 SATA controller * tag 'arm-soc/for-5.13/drivers' of https://github.com/Broadcom/stblinux: soc: bcm: bcm-pmb: add BCM63138 SATA support dt-bindings: power: bcm-pmb: add BCM63138 binding Link: https://lore.kernel.org/r/20210330184006.1451315-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-25soc: bcm: bcm-pmb: add BCM63138 SATA supportRafał Miłecki1-0/+30
BCM63138 has SATA controller that needs to be powered up using PMB. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-03-22soc: bcm: raspberrypi-power: Release firmware handle on unbindNicolas Saenz Julienne1-1/+1
Use devm_rpi_firmware_get() so as to make sure we release RPi's firmware interface when unbinding the device. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2021-01-27soc: bcm: brcmstb: Remove soc_is_brcmstb()Florian Fainelli1-17/+0
We have no in tree or out of tree users of this function, remove it and the header providing its prototype. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-01-12soc: bcm: add PM driver for Broadcom's PMBRafał Miłecki4-1/+344
PMB originally comes from BCM63138 but can be also found on many other chipsets (e.g. BCM4908). It's needed to power on and off SoC blocks like PCIe, SATA, USB. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-11-03soc: bcm: brcmstb: pm: pm-arm: Provide prototype for brcmstb_pm_s3_finish()Lee Jones1-0/+2
brcmstb_pm_s3_finish() cannot be made static because it is referenced from brcmstb_pm_s3(), so let's provide a prototype for it instead. Fixes the following W=1 kernel build warning(s): drivers/soc/bcm/brcmstb/pm/pm-arm.c:395:14: warning: no previous prototype for ‘brcmstb_pm_s3_finish’ [-Wmissing-prototypes] Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-06soc: bcm: brcmstb: biuctrl: Change RAC data line prefetching after 4 ↵Florian Fainelli1-2/+6
consecutive lines Change the RACPREFDATA(x) setting to prefetch the next 256-byte line after 4 consecutive lines have been used, instead of after 2 consecutive lines. This does improve the synthetic memcpy benchmark by an additional +0.5% on top of the previous change for Cortex-A72 CPUs. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-04soc: bcm: brcmstb: biuctrl: Change RAC prefetch distance from +/-1 to +/- 2Florian Fainelli1-4/+16
Change the RAC prefetch distance from +/- 1 to +/- 2 for Cortex-A72 CPUs since this provides an average of a 3.8% performance increase for synthetic memcpy benchmarks. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-04soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72165Florian Fainelli1-0/+1
72165 uses a Brahma-B53 CPU and its Bus Interface Unit, tune it according to the existing values we have. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-04soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72164Florian Fainelli1-0/+1
72164 uses a Brahma-B53 CPU and its Bus Interface Unit, tune it according to the existing values we have. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-08-17soc: bcm: add BCM63xx power domain driverÁlvaro Fernández Rojas5-0/+403
BCM6318, BCM6328, BCM6362 and BCM63268 SoCs have a power domain controller to enable/disable certain components in order to save power. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <F.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-08-17soc: bcm: brcmstb: biuctrl: Enable Read-ahead cacheFlorian Fainelli1-10/+77
Brahma-B53 and Cortex-A72 CPUs integrated on Broadcom STB SoCs feature a read-ahead cache that performs cache line size adaptation between the bus interface unit and the memory controller. On 32-bit ARM kernels we have to resort to a full featured read-ahead cache driver under arch/arm/mm/cache-b15-rac.c (CONFIG_CACHE_B15_RAC) because there are still cache maintenance operations by set/ways/index that cannot be transparently handled by the ARM Coherency Extension that the read-ahead cache interfaces to. The 64-bit ARM kernel however has long deprecated all of those, so this is simply a one time configuration. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-01-05soc: bcm: brcmstb: biuctrl: Update programming for 7211Florian Fainelli1-6/+7
Add a matching entry for 7211 which can be programmed with the same BIUCTRL settings as other Brahma-B53 based SoCs. While at it, rename the function to include a72 in the name to reflect this applies to both types of 64-bit capable CPUs that we support (Brahma-B53 and Cortex-A72). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-01-05soc: bcm: brcmstb: biuctrl: Update layout for A72 on 7211Florian Fainelli1-0/+8
The BIUCTRL layout is a little different on 7211 which is equipped with a Cortex-A72, account for those register offset differences. We will match 7211 specifically in a subsequent commit. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-01-05soc: bcm: brcmstb: biuctrl: Tune interface for 7255 and 7216Florian Fainelli1-0/+2
7255 and 7216 are some of the latest chips that were produced and support the full register range configuration for the BIU, add the two entries to get the expected programming. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-01-05soc: bcm: brcmstb: biuctrl: Tune 7260 BIU interfaceFlorian Fainelli1-2/+5
7260A0 and B0 are both supported, and 7260A0 has a small difference in that it does not support the write-back control register, which is why we have a different array of registers. Update the comment above b53_cpubiuctrl_no_wb_regs to denote that difference. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-06-16Merge tag 'arm-soc/for-5.2/drivers-fixes' of ↵Olof Johansson1-2/+4
https://github.com/Broadcom/stblinux into fixes This pull request contains Broadcom ARM/ARM64/MIPS SoCs device drivers fixes for 5.2-rc1, please pull the following: - Florian fixes the biuctrl driver not to create an error condition/path upon unsupported CPU and also fixes the biuctrl driver writes to used a data barrier which is necessary given the HW block design * tag 'arm-soc/for-5.2/drivers-fixes' of https://github.com/Broadcom/stblinux: soc: bcm: brcmstb: biuctrl: Register writes require a barrier soc: brcmstb: Fix error path for unsupported CPUs Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner9-81/+9
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner5-0/+5
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20soc: bcm: brcmstb: biuctrl: Register writes require a barrierFlorian Fainelli1-1/+1
The BIUCTRL register writes require that a data barrier be inserted after comitting the write to the register for the block to latch in the recently written values. Reads have no such requirement and are not changed. Fixes: 34642650e5bc ("soc: Move brcmstb to bcm/brcmstb") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-05-20soc: brcmstb: Fix error path for unsupported CPUsFlorian Fainelli1-1/+3
In case setup_hifcpubiuctrl_regs() returns an error, because of e.g: an unsupported CPU type, just catch that error and return instead of blindly continuing with the initialization. This fixes a NULL pointer de-reference with the code continuing without having a proper array of registers to use. Fixes: 22f7a9116eba ("soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-03-18Merge tag 'tags/bcm2835-drivers-next-2019-03-12' into soc/fixesFlorian Fainelli1-7/+42
This pull request brings in a build fix for arm64 with bcm2835 enabled, and fixes the driver in the presence of -EPROBE_DEFER. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-03-04soc: bcm: bcm2835-pm: Fix error paths of initialization.Eric Anholt1-5/+30
The clock driver may probe after ours and so we need to pass the -EPROBE_DEFER out. Fix the other error path while we're here. v2: Use dom->name instead of dom->gov as the flag for initialized domains, since we aren't setting up a governor. Make sure to clear ->clk when no clk is present in the DT. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.")
2019-03-04soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.Eric Anholt1-2/+12
We don't have ASB master/slave regs for this domain, so just skip that step. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.")
2019-01-31soc: bcm: bcm2835-pm: Make local symbol staticWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/soc/bcm/bcm2835-power.c:556:32: warning: symbol 'bcm2835_reset_ops' was not declared. Should it be static? Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-01-24soc: bcm: Make PM driver default for BCM2835Stefan Wahren1-0/+1
Since commit 52a4adbaebcc ("ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.") VC4 on BCM2835 requires the power driver. Otherwise the driver won't probe and HDMI output stays black: vc4_v3d 20c00000.v3d: ignoring dependency for device, assuming no driver Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2019-01-09soc: bcm: bcm2835-pm: Add support for power domains under a new binding.Eric Anholt3-0/+673
This provides a free software alternative to raspberrypi-power.c's firmware calls to manage power domains. It also exposes a reset line, where previously the vc4 driver had to try to force power off the domain in order to trigger a reset. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
2018-11-28soc: bcm: brcmstb: Don't leak device tree node referenceYangtao Li1-1/+5
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. soc_is_brcmstb() doesn't do that, so fix it. [treding: slightly rewrite to avoid inline comparison] Fixes: d52fad262041 ("soc: add stubs for brcmstb SoC's") Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-11-27Merge tag 'tags/bcm2835-drivers-next-2018-11-27' into drivers/nextFlorian Fainelli1-4/+1
This pull request adds SPDX to BCM2835 drivers, and fixes some bugs in the firmware driver (silently hanging if the VPU doesn't respond to a mailbox transaction, and undersized buffers in the firmware property transactions for tags that aren't used yet in the upstream). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-11-14soc: bcm: Switch raspberrypi-power to SPDX identifierStefan Wahren1-4/+1
Adopt the SPDX license identifier headers to ease license compliance management. Cc: Alexander Aring <aring@mojatatu.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2018-11-05soc: bcm: brcmstb: Fix re-entry point with a THUMB2_KERNELFlorian Fainelli1-1/+1
When the kernel is built with CONFIG_THUMB2_KERNEL we would set the kernel's resume entry point to be a function that is already built as Thumb-2 code while the boot agent doing the resume is in ARM mode, so this does not work. There is a header label defined: cpu_resume_arm which we can use to do the switching for us. Fixes: 0b741b8234c8 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-06-26soc: bcm: brcmstb: Add missing DDR MEMC compatible stringsFlorian Fainelli1-0/+12
We would not be matching the following chip/compatible strings combinations, which would lead to not setting the warm boot flag correctly, fix that: 7260A0/B0: brcm,brcmstb-memc-ddr-rev-b.2.1 7255A0: brcm,brcmstb-memc-ddr-rev-b.2.3 7278Bx: brcm,brcmstb-memc-ddr-rev-b.3.1 The B2.1 core (which is in 7260 A0 and B0) doesn't have the SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL setup in the memsys init code, nor does it have the warm boot flag re-definition on entry. Those changes were for B2.2 and later MEMSYS cores. Fall back to the previous S2/S3 entry method for these specific chips. Fixes: 0b741b8234c8 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)") Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-06-26soc: bcm: brcmstb: pm: Add support for newer rev B3.0 controllersDoug Berger1-0/+4
Update the Device Tree binding document and add a matching entry for the MEMC DDR controller revision B3.0 which is found on chips like 7278A0 and newer. Signed-off-by: Doug Berger <opendmb@gmail.com> [florian: tweak commit message, make it apply to upstream kernel] Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-2/+4
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-16soc: bcm: raspberrypi-power: Fix use of __packedFlorian Fainelli1-1/+1
Commit a09cd356586d ("ARM: bcm2835: add rpi power domain driver") attempted to annotate the structure rpi_power_domain_packet with __packed but introduced a typo and made it named __packet instead. Just drop the annotation since the structure is naturally aligned already. Fixes: a09cd356586d ("ARM: bcm2835: add rpi power domain driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-15soc: bcm: brcmstb: Be multi-platform compatibleThierry Reding1-9/+29
We were making a bunch of wrong assumptions that turned out to blow out on non-Broadcom STB platforms: - we would return -ENODEV from brcmstb_soc_device_early_init() if we could not find the sun_top_ctrl device node, this is not an error in the context of a multi-platform kernel - we would still try to register the Broadcom STB SoC device, even if we are not running on such a platform While at it, also fix the sun_top_ctrl device_node leaks while we change the flow of brcmstb_soc_device_init() and brcmstb_soc_device_early_init(). Fixes: f780429adfbc ("soc: brcmstb: biuctrl: Move to early_initcall") Signed-off-by: Thierry Reding <treding@nvidia.com> [florian: Combine all of Thierry's patch in one go for easier review] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-15soc: brcmstb: biuctrl: exit without warning on non brcmstb platformsSudeep Holla1-9/+11
Currently if this driver is included, we get the following warning on any platforms irrespective of whether it's brcmstb platform or not. " brcmstb: biuctrl: missing BIU control node brcmstb: biuctrl: MCP: Unable to disable write pairing! " This patch allows to exit early without any warning messages on non brcmstb platforms as it's meaningless for them. Cc: Brian Norris <computersforpeace@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Fixes: f780429adfbc ("soc: brcmstb: biuctrl: Move to early_initcall") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [florian: Add fixes tag, make initcall non fatal] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-12Revert "soc: brcmstb: Only register SoC device on STB platforms"Olof Johansson1-5/+0
This reverts commit 23a0d847992997000ca2223a19111ee778fbea63. Patch has issues that's being addressed by the Florian and he will follow up with a new patch to address the original issue. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-11soc: brcmstb: Only register SoC device on STB platformsThierry Reding1-0/+5
After moving the SoC device initialization to an early initcall in commit f780429adfbc ("soc: brcmstb: biuctrl: Move to early_initcall"), the Broadcom STB SoC device is registered on all platforms if support for the device is enabled in the kernel configuration. This causes an additional SoC device to appear on platforms that already register a native one. In case of Tegra the STB SoC device is registered as soc0 (with totally meaningless content in the sysfs attributes) and causes various scripts and programs to fail because they don't know how to parse that data. To fix this, duplicate the check from brcmstb_soc_device_early_init() that already prevents the code from doing anything nonsensical on non- STB platforms. Fixes: f780429adfbc ("soc: brcmstb: biuctrl: Move to early_initcall") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-12-20soc: brcmstb: biuctrl: Move to early_initcallFlorian Fainelli1-2/+4
Being called during early_initcall() is early enough that it occurs before SMP initialization, which is all we care about for the Bus Interface Unit configuration. This solves lack of BIU initialization on ARM64 platforms where we do not have an anchor where to put the BIU initialization (since there are no machine descriptors). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-20soc: brcmstb: Split initializationFlorian Fainelli1-14/+13
We may need access to family_id and product_id fairly early on boot for other parts of the code (e.g: biuctrl.c), so split the initialization between an early_init() and an arch_initcall() which allows us to do that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-20soc: brcmstb: biuctrl: Fine tune B53 MCP interface settingsFlorian Fainelli1-0/+76
In order to achieve expected MCP bus throughput on 3 particular chips: 7268, 7271 and 7278, do the appropriate programming of the MCP interface: increase number of MCP write credits, turn on write-back throttling when present. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-12 11:09:39 +0000