summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2021-05-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds9-483/+432
Pull more SCSI updates from James Bottomley: "This is a set of minor fixes in various drivers (qla2xxx, ufs, scsi_debug, lpfc) one doc fix and a fairly large update to the fnic driver to remove the open coded iteration functions in favour of the scsi provided ones" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fnic: Use scsi_host_busy_iter() to traverse commands scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io() scsi: scsi_debug: Fix cmd_per_lun, set to max_queue scsi: ufs: core: Narrow down fast path in system suspend path scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend scsi: ufs: core: Do not put UFS power into LPM if link is broken scsi: qla2xxx: Prevent PRLI in target mode scsi: qla2xxx: Add marginal path handling support scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found scsi: ufs: core: Fix a typo in ufs-sysfs.c scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command scsi: lpfc: Fix DMA virtual address ptr assignment in bsg scsi: lpfc: Fix illegal memory access on Abort IOCBs scsi: blk-mq: Fix build warning when making htmldocs
2021-05-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds14-70/+2
Merge yet more updates from Andrew Morton: "This is everything else from -mm for this merge window. 90 patches. Subsystems affected by this patch series: mm (cleanups and slub), alpha, procfs, sysctl, misc, core-kernel, bitmap, lib, compat, checkpatch, epoll, isofs, nilfs2, hpfs, exit, fork, kexec, gcov, panic, delayacct, gdb, resource, selftests, async, initramfs, ipc, drivers/char, and spelling" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (90 commits) mm: fix typos in comments mm: fix typos in comments treewide: remove editor modelines and cruft ipc/sem.c: spelling fix fs: fat: fix spelling typo of values kernel/sys.c: fix typo kernel/up.c: fix typo kernel/user_namespace.c: fix typos kernel/umh.c: fix some spelling mistakes include/linux/pgtable.h: few spelling fixes mm/slab.c: fix spelling mistake "disired" -> "desired" scripts/spelling.txt: add "overflw" scripts/spelling.txt: Add "diabled" typo scripts/spelling.txt: add "overlfow" arm: print alloc free paths for address in registers mm/vmalloc: remove vwrite() mm: remove xlate_dev_kmem_ptr() drivers/char: remove /dev/kmem for good mm: fix some typos and code style problems ipc/sem.c: mundane typo fixes ...
2021-05-07treewide: remove editor modelines and cruftMasahiro Yamada12-70/+0
The section "19) Editor modelines and other cruft" in Documentation/process/coding-style.rst clearly says, "Do not include any of these in source files." I recently receive a patch to explicitly add a new one. Let's do treewide cleanups, otherwise some people follow the existing code and attempt to upstream their favoriate editor setups. It is even nicer if scripts/checkpatch.pl can check it. If we like to impose coding style in an editor-independent manner, I think editorconfig (patch [1]) is a saner solution. [1] https://lore.kernel.org/lkml/20200703073143.423557-1-danny@kdrag0n.dev/ Link: https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> [auxdisplay] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-06include: remove pagemap.h from blkdev.hMatthew Wilcox (Oracle)1-0/+1
My UEK-derived config has 1030 files depending on pagemap.h before this change. Afterwards, just 326 files need to be rebuilt when I touch pagemap.h. I think blkdev.h is probably included too widely, but untangling that dependency is harder and this solves my problem. x86 allmodconfig builds, but there may be implicit include problems on other architectures. Link: https://lkml.kernel.org/r/20210309195747.283796-1-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Dan Williams <dan.j.williams@intel.com> [nvdimm] Acked-by: Jens Axboe <axboe@kernel.dk> [block] Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Martin K. Petersen <martin.petersen@oracle.com> [scsi] Reviewed-by: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-06proc: mandate ->proc_lseek in "struct proc_ops"Alexey Dobriyan1-0/+1
Now that proc_ops are separate from file_operations and other operations it easy to check all instances to have ->proc_lseek hook and remove check in main code. Note: nonseekable_open() files naturally don't require ->proc_lseek. Garbage collect pde_lseek() function. [adobriyan@gmail.com: smoke test lseek()] Link: https://lkml.kernel.org/r/YG4OIhChOrVTPgdN@localhost.localdomain Link: https://lkml.kernel.org/r/YFYX0Bzwxlc7aBa/@localhost.localdomain Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05Merge tag 'pci-v5.13-changes' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Release OF node when pci_scan_device() fails (Dmitry Baryshkov) - Add pci_disable_parity() (Bjorn Helgaas) - Disable Mellanox Tavor parity reporting (Heiner Kallweit) - Disable N2100 r8169 parity reporting (Heiner Kallweit) - Fix RCiEP device to RCEC association (Qiuxu Zhuo) - Convert sysfs "config", "rom", "reset", "label", "index", "acpi_index" to static attributes to help fix races in device enumeration (Krzysztof Wilczyński) - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof Wilczyński) - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński) - Remove unused alloc_pci_root_info() return value (Krzysztof Wilczyński) PCI device hotplug: - Fix acpiphp reference count leak (Feilong Lin) Power management: - Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki) - Fix runtime PM imbalance (Dinghao Liu) Virtualization: - Increase delay after FLR to work around Intel DC P4510 NVMe erratum (Raphael Norwitz) MSI: - Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier) - For rcar, xilinx, use controller address as MSI doorbell (Marc Zyngier) - Remove unused hv msi_controller struct (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller altogether (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) VPD: - Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit) - Remove sysfs VPD size checking dead code (Heiner Kallweit) - Convert VPF sysfs file to static attribute (Heiner Kallweit) - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit) - Tone down "missing VPD" message (Heiner Kallweit) Endpoint framework: - Fix NULL pointer dereference when epc_features not implemented (Shradha Todi) - Add missing destroy_workqueue() in endpoint test (Yang Yingliang) Amazon Annapurna Labs PCIe controller driver: - Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) APM X-Gene PCIe controller driver: - Fix cfg resource mapping regression (Dejin Zheng) Broadcom iProc PCIe controller driver: - Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár) Broadcom STB PCIe controller driver: - Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim Quinlan) - Fix use of BCM7216 reset controller (Jim Quinlan) - Use reset/rearm for Broadcom STB pulse reset instead of deassert/assert (Jim Quinlan) - Fix brcm_pcie_probe() error return for unsupported revision (Wei Yongjun) Cavium ThunderX PCIe controller driver: - Fix compile testing (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) Freescale Layerscape PCIe controller driver: - Fix ls_pcie_ep_probe() syntax error (comma for semicolon) (Krzysztof Wilczyński) - Remove layerscape-gen4 dependencies on OF and ARM64, add dependency on ARCH_LAYERSCAPE (Geert Uytterhoeven) HiSilicon HIP PCIe controller driver: - Remove obsolete HiSilicon PCIe DT description (Dongdong Liu) Intel Gateway PCIe controller driver: - Remove unused pcie_app_rd() (Jiapeng Chong) Intel VMD host bridge driver: - Program IRTE with Requester ID of VMD endpoint, not child device (Jon Derrick) - Disable VMD MSI-X remapping when possible so children can use more MSI-X vectors (Jon Derrick) MediaTek PCIe controller driver: - Configure FC and FTS for functions other than 0 (Ryder Lee) - Add YAML schema for MediaTek (Jianjun Wang) - Export pci_pio_to_address() for module use (Jianjun Wang) - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang) - Add MediaTek MT8192 INTx support (Jianjun Wang) - Add MediaTek MT8192 MSI support (Jianjun Wang) - Add MediaTek MT8192 system power management support (Jianjun Wang) - Add missing MODULE_DEVICE_TABLE (Qiheng Lin) Microchip PolarFlare PCIe controller driver: - Make several symbols static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar) - Make several symbols const (Rikard Falkeborn) - Fix Kconfig host/endpoint typo (Wesley Sheng) SiFive FU740 PCIe controller driver: - Add pcie_aux clock to prci driver (Greentime Hu) - Use reset-simple in prci driver for PCIe (Greentime Hu) - Add SiFive FU740 PCIe host controller driver and DT binding (Paul Walmsley, Greentime Hu) Synopsys DesignWare PCIe controller driver: - Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized along with the RC in resume (Jisheng Zhang) - Move iATU detection earlier to fix regression (Hou Zhiqiang) TI J721E PCIe driver: - Add DT binding and TI j721e support for refclk to PCIe connector (Kishon Vijay Abraham I) - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Use generic config accessors for TI AM65x (K3) to fix regression (Kishon Vijay Abraham I) Xilinx NWL PCIe controller driver: - Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar Gogada) - Add optional "dma-coherent" DT property (Bharat Kumar Gogada) Miscellaneous: - Fix kernel-doc warnings (Krzysztof Wilczyński) - Remove unused MicroGate SyncLink device IDs (Jiri Slaby) - Remove redundant dev_err() for devm_ioremap_resource() failure (Chen Hui) - Remove redundant initialization (Colin Ian King) - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof Wilczyński)" * tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits) riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC PCI: fu740: Add SiFive FU740 PCIe host controller driver dt-bindings: PCI: Add SiFive FU740 PCIe host controller MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver clk: sifive: Use reset-simple in prci driver for PCIe driver clk: sifive: Add pcie_aux clock in prci driver for PCIe driver PCI: brcmstb: Use reset/rearm instead of deassert/assert ata: ahci_brcm: Fix use of BCM7216 reset controller reset: add missing empty function reset_control_rearm() PCI: Allow VPD access for QLogic ISP2722 PCI/VPD: Add helper pci_get_func0_dev() PCI/VPD: Remove pci_vpd_find_tag() SRDT handling PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument PCI/VPD: Change pci_vpd_init() return type to void PCI/VPD: Make missing VPD message less alarming PCI/VPD: Remove pci_set_vpd_size() x86/PCI: Remove unused alloc_pci_root_info() return value MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer PCI: mediatek-gen3: Add system PM support PCI: mediatek-gen3: Add MSI support ...
2021-05-02scsi: fnic: Use scsi_host_busy_iter() to traverse commandsHannes Reinecke1-446/+375
Use scsi_host_busy_iter() to traverse commands instead of hand-crafted routines walking the command list. Link: https://lore.kernel.org/r/20210429122517.39659-3-hare@suse.de Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-02scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io()Hannes Reinecke1-6/+3
'exclude_id' is always SCSI_NO_TAG which will never be reached when traversing the list of tags. Link: https://lore.kernel.org/r/20210429122517.39659-2-hare@suse.de Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-02scsi: scsi_debug: Fix cmd_per_lun, set to max_queueDouglas Gilbert1-8/+16
Make sure that the cmd_per_lun value placed in the host template never exceeds the can_queue value. If the max_queue driver parameter is not specified then both cmd_per_lun and can_queue are set to CAN_QUEUE. CAN_QUEUE is a compile time constant and is used to dimension an array to hold queued requests. If the max_queue driver parameter is given it is must be less than or equal to CAN_QUEUE and if so, the host template values are adjusted. Remove undocumented code that allowed queue_depth to exceed CAN_QUEUE and cause stack full type errors. There is a documented way to do that with every_nth and echo 0x8000 > /sys/bus/pseudo/drivers/scsi_debug/opts See: https://sg.danny.cz/sg/scsi_debug.html Tweak some formatting, and add a suggestion to the "trim poll_queues" warning. Link: https://lore.kernel.org/r/20210415015031.607153-1-dgilbert@interlog.com Reported-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: John Garry <john.garry@hauwei.com> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-30PCI/VPD: Remove pci_vpd_find_tag() 'offset' argumentHeiner Kallweit1-2/+1
All callers pass 0 as offset. Therefore remove the parameter and use a fixed offset 0 in pci_vpd_find_tag(). Link: https://lore.kernel.org/r/f62e6e19-5423-2ead-b2bd-62844b23ef8f@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-28scsi: ufs: core: Narrow down fast path in system suspend pathCan Guo1-0/+1
If spm_lvl is set to 0 or 1, when system suspend kicks start and HBA is runtime active, system suspend may just bail without doing anything (the fast path), leaving other contexts still running, e.g., clock gating and clock scaling. When system resume kicks start, concurrency can happen between ufshcd_resume() and these contexts, leading to various stability issues. Add a check against HBA's runtime state and allowing fast path only if HBA is runtime suspended, otherwise let system suspend go ahead call ufshcd_suspend(). This will guarantee that these contexts are stopped by either runtime suspend or system suspend. Link: https://lore.kernel.org/r/1619408921-30426-4-git-send-email-cang@codeaurora.org Fixes: 0b257734344a ("scsi: ufs: optimize system suspend handling") Reviewed-by: Daejun Park <daejun7.park@samsung.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-28scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspendCan Guo1-0/+2
During ufs system suspend, leaving rpm_dev_flush_recheck_work running or pending is risky because concurrency may happen between system suspend/resume and runtime resume routine. Fix this by cancelling rpm_dev_flush_recheck_work synchronously during system suspend. Link: https://lore.kernel.org/r/1619408921-30426-3-git-send-email-cang@codeaurora.org Fixes: 51dd905bd2f6 ("scsi: ufs: Fix WriteBooster flush during runtime suspend") Reviewed-by: Daejun Park <daejun7.park@samsung.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-28scsi: ufs: core: Do not put UFS power into LPM if link is brokenCan Guo1-2/+2
During resume, if link is broken due to AH8 failure, make sure ufshcd_resume() does not put UFS power back into LPM. Link: https://lore.kernel.org/r/1619408921-30426-2-git-send-email-cang@codeaurora.org Fixes: 4db7a2360597 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths") Reviewed-by: Daejun Park <daejun7.park@samsung.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-28scsi: qla2xxx: Prevent PRLI in target modeAnastasia Kovaleva1-0/+3
In a case when the initiator in P2P mode by some circumstances does not send PRLI, the target, in a case when the target port's WWPN is less than initiator's, changes the discovery state in DSC_GNL. When gnl completes it sends PRLI to the initiator. Usually the initiator in P2P mode always sends PRLI. We caught this issue on Linux stable v5.4.6 https://www.spinics.net/lists/stable/msg458515.html. Fix this particular corner case in the behaviour of the P2P mod target login state machine. Link: https://lore.kernel.org/r/20210422153414.4022-1-a.kovaleva@yadro.com Fixes: a9ed06d4e640 ("scsi: qla2xxx: Allow PLOGI in target mode") Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-28scsi: qla2xxx: Add marginal path handling supportBikash Hazarika1-0/+1
Add support for eh_should_retry_cmd callback in qla2xxx host template. Link: https://lore.kernel.org/r/20210427050914.7270-1-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-28scsi: ufs: core: Fix a typo in ufs-sysfs.cKeoseong Park1-6/+6
Fix the following typo: ufschd_uic_link_state_to_string() -> ufshcd_uic_link_state_to_string() ufschd_ufs_dev_pwr_mode_to_string() -> ufshcd_ufs_dev_pwr_mode_to_string() Link: https://lore.kernel.org/r/1381713434.61619509208911.JavaMail.epsvc@epcpadp3 Signed-off-by: Keoseong Park <keosung.park@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds186-4486/+5878
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, target, tcmu, smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx). The major core change is using a sbitmap instead of an atomic for queue tracking" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits) scsi: target: tcm_fc: Fix a kernel-doc header scsi: target: Shorten ALUA error messages scsi: target: Fix two format specifiers scsi: target: Compare explicitly with SAM_STAT_GOOD scsi: sd: Introduce a new local variable in sd_check_events() scsi: dc395x: Open-code status_byte(u8) calls scsi: 53c700: Open-code status_byte(u8) calls scsi: smartpqi: Remove unused functions scsi: qla4xxx: Remove an unused function scsi: myrs: Remove unused functions scsi: myrb: Remove unused functions scsi: mpt3sas: Fix two kernel-doc headers scsi: fcoe: Suppress a compiler warning scsi: libfc: Fix a format specifier scsi: aacraid: Remove an unused function scsi: core: Introduce enum scsi_disposition scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case scsi: core: Rename scsi_softirq_done() into scsi_complete() scsi: core: Remove an incorrect comment scsi: core: Make the scsi_alloc_sgtables() documentation more accurate ...
2021-04-28Merge tag 'for-5.13/block-2021-04-27' of git://git.kernel.dk/linux-blockLinus Torvalds15-634/+123
Pull block updates from Jens Axboe: "Pretty quiet round this time, which is nice. In detail: - Series revamping bounce buffer support (Christoph) - Dead code removal (Christoph, Bart) - Partition iteration revamp, now using xarray (Christoph) - Passthrough request scheduler improvements (Lin) - Series of BFQ improvements (Paolo) - Fix ioprio task iteration (Peter) - Various little tweaks and fixes (Tejun, Saravanan, Bhaskar, Max, Nikolay)" * tag 'for-5.13/block-2021-04-27' of git://git.kernel.dk/linux-block: (41 commits) blk-iocost: don't ignore vrate_min on QD contention blk-mq: Fix spurious debugfs directory creation during initialization bfq/mq-deadline: remove redundant check for passthrough request blk-mq: bypass IO scheduler's limit_depth for passthrough request block: Remove an obsolete comment from sg_io() block: move bio_list_copy_data to pktcdvd block: remove zero_fill_bio_iter block: add queue_to_disk() to get gendisk from request_queue block: remove an incorrect check from blk_rq_append_bio block: initialize ret in bdev_disk_changed block: Fix sys_ioprio_set(.which=IOPRIO_WHO_PGRP) task iteration block: remove disk_part_iter block: simplify diskstats_show block: simplify show_partition block: simplify printk_all_partitions block: simplify partition_overlaps block: simplify partition removal block: take bd_mutex around delete_partitions in del_gendisk block: refactor blk_drop_partitions block: move more syncing and invalidation to delete_partition ...
2021-04-26scsi: lpfc: Fix bad memory access during VPD DUMP mailbox commandJames Smart2-13/+14
The dump command for reading a region passes a requested read length specified in words (4-byte units). The response overwrites the same field with the actual number of bytes read. The mailbox handler for DUMP which reads VPD data (region 23) is treating the response field as if it were still a word_cnt, thus multiplying it by 4 to set the read's "length". Given the read value was calculated based on the size of the read buffer, the longer response length runs off the end of the buffer. Fix by reworking the code to use the response field as a byte count. Link: https://lore.kernel.org/r/20210421234511.102206-1-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-26scsi: lpfc: Fix DMA virtual address ptr assignment in bsgJames Smart1-1/+1
lpfc_bsg_ct_unsol_event() routine acts assigns a ct_request to the wrong structure address, resulting in a bad address that results in bsg related timeouts. Correct the ct_request assignment to use the kernel virtual buffer address (not the control structure address). Link: https://lore.kernel.org/r/20210421234448.102132-1-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-26scsi: lpfc: Fix illegal memory access on Abort IOCBsJames Smart1-2/+9
In devloss timer handler and in backend calls to terminate remote port I/O, there is logic to walk through all active IOCBs and validate them to potentially trigger an abort request. This logic is causing illegal memory accesses which leads to a crash. Abort IOCBs, which may be on the list, do not have an associated lpfc_io_buf struct. The driver is trying to map an lpfc_io_buf struct on the IOCB and which results in a bogus address thus the issue. Fix by skipping over ABORT IOCBs (CLOSE IOCBs are ABORTS that don't send ABTS) in the IOCB scan logic. Link: https://lore.kernel.org/r/20210421234433.102079-1-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-17Merge tag 'scsi-fixes' of ↵Linus Torvalds3-31/+22
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two fixes: the libsas fix is for a problem that occurs when trying to change the cache type of an ATA device and the libiscsi one is a regression fix from this merge window" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: Reset num_scatter if libata marks qc as NODATA scsi: iscsi: Fix iSCSI cls conn state
2021-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-55/+64
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c - keep the ZC code, drop the code related to reinit net/bridge/netfilter/ebtables.c - fix build after move to net_generic Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-15scsi: sd: Introduce a new local variable in sd_check_events()Bart Van Assche1-2/+3
Instead of using 'retval' to represent first a SCSI status and later whether or not a disk change event occurred, introduce a new variable for the latter purpose. Link: https://lore.kernel.org/r/20210415220826.29438-17-bvanassche@acm.org Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: dc395x: Open-code status_byte(u8) callsBart Van Assche1-2/+2
The dc395x driver is one of the two drivers that passes an u8 argument to status_byte() instead of an s32 argument. Open-code status_byte() in preparation of changing SCSI status values into a structure. Link: https://lore.kernel.org/r/20210415220826.29438-16-bvanassche@acm.org Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: 53c700: Open-code status_byte(u8) callsBart Van Assche1-2/+2
The 53c700 driver is one of the two drivers that passes an u8 argument to status_byte() instead of an s32 argument. Open-code status_byte in preparation of changing SCSI status values into a structure. Link: https://lore.kernel.org/r/20210415220826.29438-15-bvanassche@acm.org Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: smartpqi: Remove unused functionsBart Van Assche1-10/+0
This was detected by building the kernel with clang and W=1. Link: https://lore.kernel.org/r/20210415220826.29438-14-bvanassche@acm.org Cc: Don Brace <don.brace@microchip.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: qla4xxx: Remove an unused functionBart Van Assche1-6/+0
This was detected by building the kernel with clang and W=1. Link: https://lore.kernel.org/r/20210415220826.29438-13-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: myrs: Remove unused functionsBart Van Assche1-99/+0
This was detected by building the kernel with clang and W=1. Link: https://lore.kernel.org/r/20210415220826.29438-12-bvanassche@acm.org Cc: Hannes Reinecke <hare@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: myrb: Remove unused functionsBart Van Assche1-71/+0
This was detected by building the kernel with clang and W=1. Link: https://lore.kernel.org/r/20210415220826.29438-11-bvanassche@acm.org Cc: Hannes Reinecke <hare@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: mpt3sas: Fix two kernel-doc headersBart Van Assche1-2/+2
Fix the following warnings: drivers/scsi/mpt3sas/mpt3sas_base.c:5430: warning: Excess function parameter 'ct' description in '_base_allocate_pcie_sgl_pool' drivers/scsi/mpt3sas/mpt3sas_base.c:5493: warning: Excess function parameter 'ctr' description in '_base_allocate_chain_dma_pool' Link: https://lore.kernel.org/r/20210415220826.29438-10-bvanassche@acm.org Fixes: d6adc251dd2f ("scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region") Fixes: 7dd847dae1c4 ("scsi: mpt3sas: Force chain buffer allocations to be within same 4 GB region") Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: fcoe: Suppress a compiler warningBart Van Assche1-1/+1
Suppress the following compiler warning: warning: cast to smaller integer type 'enum fip_mode' from 'void *' [-Wvoid-pointer-to-enum-cast] enum fip_mode fip_mode = (enum fip_mode)kp->arg; ^~~~~~~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20210415220826.29438-9-bvanassche@acm.org Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: libfc: Fix a format specifierBart Van Assche1-1/+1
Since the 'mfs' member has been declared as 'u32' in include/scsi/libfc.h, use the %u format specifier instead of %hu. This patch fixes the following clang compiler warning: warning: format specifies type 'unsigned short' but the argument has type 'u32' (aka 'unsigned int') [-Wformat] "lport->mfs:%hu\n", mfs, lport->mfs); ~~~ ^~~~~~~~~~ %u Link: https://lore.kernel.org/r/20210415220826.29438-8-bvanassche@acm.org Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: aacraid: Remove an unused functionBart Van Assche1-5/+0
This was detected by building the kernel with clang and W=1. Link: https://lore.kernel.org/r/20210415220826.29438-7-bvanassche@acm.org Cc: aacraid@microsemi.com Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: core: Introduce enum scsi_dispositionBart Van Assche6-38/+42
Improve readability of the code in the SCSI core by introducing an enumeration type for the values used internally that decide how to continue processing a SCSI command. The eh_*_handler return values have not been changed because that would involve modifying all SCSI drivers. The output of the following command has been inspected to verify that no out-of-range values are assigned to a variable of type enum scsi_disposition: KCFLAGS=-Wassign-enum make CC=clang W=1 drivers/scsi/ Link: https://lore.kernel.org/r/20210415220826.29438-6-bvanassche@acm.org Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK caseBart Van Assche1-1/+1
The comment above scsi_send_eh_cmnd() says: "Returns SUCCESS or FAILED or NEEDS_RETRY". This patch makes all values returned by scsi_send_eh_cmnd() match the documentation of this function. This change does not affect the behavior of scsi_eh_tur() nor of scsi_eh_try_stu() nor of the scsi_request_sense() callers. See also commit bbe9fb0d04b9 ("scsi: Avoid that .queuecommand() gets called for a blocked SCSI device"; v5.3). Link: https://lore.kernel.org/r/20210415220826.29438-5-bvanassche@acm.org Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: core: Rename scsi_softirq_done() into scsi_complete()Bart Van Assche1-3/+7
Commit 320ae51feed5 ("blk-mq: new multi-queue block IO queueing mechanism"; v3.13) introduced a code path that calls the blk-mq completion function from interrupt context. scsi-mq was introduced by commit d285203cf647 ("scsi: add support for a blk-mq based I/O path."; v3.17). Since the introduction of scsi-mq, scsi_softirq_done() can be called from interrupt context. That made the name of the function misleading, rename it to scsi_complete(). Link: https://lore.kernel.org/r/20210415220826.29438-4-bvanassche@acm.org Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: core: Make the scsi_alloc_sgtables() documentation more accurateBart Van Assche1-2/+5
The current scsi_alloc_sgtables() documentation does not accurately explain what this function does. Hence improve the documentation of this function. Link: https://lore.kernel.org/r/20210415220826.29438-2-bvanassche@acm.org Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Remove global lock from outbound queue processingViswas G3-5/+9
Introduce spin lock for outbound queue. With this, driver need not acquire HBA global lock for outbound queue processing. Link: https://lore.kernel.org/r/20210415103352.3580-9-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Reset PI and CI memory during re-initializationViswas G2-0/+4
Producer index(PI) outbound queue and consumer index(CI) for Outbound queue are in DMA memory. During resume(), the stale PI and CI Values will lead to unexpected behavior. These values should be reset to 0 during driver reinitialization. Link: https://lore.kernel.org/r/20210415103352.3580-8-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Completing pending I/O after fatal errorRuksar Devadi6-7/+65
When controller runs into fatal error, I/Os get stuck with no response, handler event is defined to complete the pending I/Os (SAS task and internal task) and also perform the cleanup for the drives. Link: https://lore.kernel.org/r/20210415103352.3580-7-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Add sysfs attribute to track iop1 countVishakha Channapattan1-0/+23
A new sysfs variable 'ctl_iop1_count' is being introduced that tells if the controller is alive by indicating controller ticks. If on subsequent run we see the ticks changing that indicates that controller is not dead. Using the 'ctl_iop1_count' sysfs variable we can see ticks incrementing: linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_iop1_count 0x00000069 0x0000006b 0x0000006d 0x00000072 Link: https://lore.kernel.org/r/20210415103352.3580-6-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Vishakha Channapattan <vishakhavc@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Add sysfs attribute to track iop0 countVishakha Channapattan1-0/+22
A new sysfs variable 'ctl_iop0_count' is being introduced that tells if the controller is alive by indicating controller ticks. If on subsequent run we see the ticks changing that indicates that controller is not dead. Using the 'ctl_iop0_count' sysfs variable we can see ticks incrementing: linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_iop0_count 0x000000a3 0x000001db 0x000001e4 0x000001e7 Link: https://lore.kernel.org/r/20210415103352.3580-5-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Vishakha Channapattan <vishakhavc@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Add sysfs attribute to track RAAE countVishakha Channapattan1-0/+22
A new sysfs variable 'ctl_raae_count' is being introduced that tells if the controller is alive by indicating controller ticks. If on subsequent run we see the ticks changing in RAAE count that indicates that controller is not dead. Using the 'ctl_raae_count' sysfs variable we can see ticks incrementing: linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_raae_count 0x00002245 0x00002253 0x0000225e Link: https://lore.kernel.org/r/20210415103352.3580-4-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Vishakha Channapattan <vishakhavc@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Add sysfs attribute to check controller hmi errorVishakha Channapattan1-0/+22
A new sysfs variable 'ctl_hmi_error' is being introduced to give the error details if the MPI initialization fails Using the 'ctl_hmi_error' sysfs variable we can check the error details: linux-2dq0:~# cat /sys/class/scsi_host/host*/ctl_hmi_error 0x00000000 0x00000000 0x00000000 Link: https://lore.kernel.org/r/20210415103352.3580-3-Viswas.G@microchip.com Signed-off-by: Vishakha Channapattan <vishakhavc@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Add sysfs attribute to check MPI stateVishakha Channapattan1-1/+31
A new sysfs variable 'ctl_mpi_state' is being introduced to check the state of MPI. Using the 'ctl_mpi_state' sysfs variable we can check the MPI state: linux-2dq0:~# cat /sys/class/scsi_host/host*/ctl_mpi_state MPI is successfully initialized Link: https://lore.kernel.org/r/20210415103352.3580-2-Viswas.G@microchip.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vishakha Channapattan <vishakhavc@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: qla2xxx: Reserve extra IRQ vectorsRoman Bolshakov1-2/+2
Commit a6dcfe08487e ("scsi: qla2xxx: Limit interrupt vectors to number of CPUs") lowers the number of allocated MSI-X vectors to the number of CPUs. That breaks vector allocation assumptions in qla83xx_iospace_config(), qla24xx_enable_msix() and qla2x00_iospace_config(). Either of the functions computes maximum number of qpairs as: ha->max_qpairs = ha->msix_count - 1 (MB interrupt) - 1 (default response queue) - 1 (ATIO, in dual or pure target mode) max_qpairs is set to zero in case of two CPUs and initiator mode. The number is then used to allocate ha->queue_pair_map inside qla2x00_alloc_queues(). No allocation happens and ha->queue_pair_map is left NULL but the driver thinks there are queue pairs available. qla2xxx_queuecommand() tries to find a qpair in the map and crashes: if (ha->mqenable) { uint32_t tag; uint16_t hwq; struct qla_qpair *qpair = NULL; tag = blk_mq_unique_tag(cmd->request); hwq = blk_mq_unique_tag_to_hwq(tag); qpair = ha->queue_pair_map[hwq]; # <- HERE if (qpair) return qla2xxx_mqueuecommand(host, cmd, qpair); } BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 72 Comm: kworker/u4:3 Tainted: G W 5.10.0-rc1+ #25 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Workqueue: scsi_wq_7 fc_scsi_scan_rport [scsi_transport_fc] RIP: 0010:qla2xxx_queuecommand+0x16b/0x3f0 [qla2xxx] Call Trace: scsi_queue_rq+0x58c/0xa60 blk_mq_dispatch_rq_list+0x2b7/0x6f0 ? __sbitmap_get_word+0x2a/0x80 __blk_mq_sched_dispatch_requests+0xb8/0x170 blk_mq_sched_dispatch_requests+0x2b/0x50 __blk_mq_run_hw_queue+0x49/0xb0 __blk_mq_delay_run_hw_queue+0xfb/0x150 blk_mq_sched_insert_request+0xbe/0x110 blk_execute_rq+0x45/0x70 __scsi_execute+0x10e/0x250 scsi_probe_and_add_lun+0x228/0xda0 __scsi_scan_target+0xf4/0x620 ? __pm_runtime_resume+0x4f/0x70 scsi_scan_target+0x100/0x110 fc_scsi_scan_rport+0xa1/0xb0 [scsi_transport_fc] process_one_work+0x1ea/0x3b0 worker_thread+0x28/0x3b0 ? process_one_work+0x3b0/0x3b0 kthread+0x112/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 The driver should allocate enough vectors to provide every CPU it's own HW queue and still handle reserved (MB, RSP, ATIO) interrupts. The change fixes the crash on dual core VM and prevents unbalanced QP allocation where nr_hw_queues is two less than the number of CPUs. Link: https://lore.kernel.org/r/20210412165740.39318-1-r.bolshakov@yadro.com Fixes: a6dcfe08487e ("scsi: qla2xxx: Limit interrupt vectors to number of CPUs") Cc: Daniel Wagner <daniel.wagner@suse.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org # 5.11+ Reported-by: Aleksandr Volkov <a.y.volkov@yadro.com> Reported-by: Aleksandr Miloserdov <a.miloserdov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: smartpqi: Fix device pointer variable reference static checker issueDon Brace1-1/+1
Dan Carpenter found a possible NULL pointer dereference issue in function pqi_sas_port_add_rphy(): drivers/scsi/smartpqi/smartpqi_sas_transport.c:97 pqi_sas_port_add_rphy() warn: variable dereferenced before check 'pqi_sas_port->device' (see line 95) Correct issue by moving reference of pqi_sas_port->device after the check for the device pointer being non-NULL. Link: https://www.mail-archive.com/kbuild@lists.01.org/msg06329.html Link: https://lore.kernel.org/r/161850493026.7302.10032784239320437353.stgit@brunhilda Fixes: ec504b23df9d ("scsi: smartpqi: Add phy ID support for the physical drives") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: smartpqi: Fix blocks_per_row static checker issueDon Brace1-2/+6
Dan Carpenter found a possible divide by 0 issue in the smartpqi driver in functions pci_get_aio_common_raid_map_values() and pqi_calc_aio_r5_or_r6(). The variable rmd->blocks_per_row is used as a divisor and could be 0. Using rmd->blocks_per_row as a divisor without checking it for 0 first. Correct these possible divide by 0 conditions by insuring that rmd->blocks_per_row is not zero before usage. The check for non-0 was too late to prevent a divide by 0 condition. Add in a comment to explain why the check for non-zero is necessary. If the member is 0, return PQI_RAID_BYPASS_INELIGIBLE before any division is performed. Link: https://lore.kernel.org/linux-scsi/YG%2F5kWHHAr7w5dU5@mwanda/ Link: https://lore.kernel.org/r/161850492435.7302.392780350442938047.stgit@brunhilda Fixes: 6702d2c40f31 ("scsi: smartpqi: Add support for RAID5 and RAID6 writes") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 18:44:16 +0000