summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2012-01-26Merge branch 'for-linus' of ↵Linus Torvalds2-8/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix assembler constraint to prevent overeager gcc optimisation mac_esp: rename irq mac_scsi: dont enable mac_scsi irq before requesting it macfb: fix black and white modes m68k/irq: Remove obsolete IRQ_FLG_* definitions Fix up trivial conflict in arch/m68k/kernel/process_mm.c as per Geert.
2012-01-22mac_esp: rename irqFinn Thain1-2/+1
Rename the "Mac ESP" irq as "ESP" to be consistent with all the other Mac drivers and ESP drivers. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-01-22mac_scsi: dont enable mac_scsi irq before requesting itFinn Thain1-6/+0
Don't enable the SCSI irq when initialising the chip -- the irq has no handler yet. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-01-18Merge tag 'scsi-misc' of ↵Linus Torvalds56-1441/+1179
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 SCSI updates on 20120118 * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (49 commits) [SCSI] libfc: remove redundant timer init for fcp [SCSI] fcoe: Move fcoe_debug_logging from fcoe.h to fcoe.c [SCSI] libfc: Declare local functions static [SCSI] fcoe: fix regression on offload em matching function for initiator/target [SCSI] qla4xxx: Update driver version to 5.02.00-k12 [SCSI] qla4xxx: Cleanup modinfo display [SCSI] qla4xxx: Update license [SCSI] qla4xxx: Clear the RISC interrupt bit during FW init [SCSI] qla4xxx: Added error logging for firmware abort [SCSI] qla4xxx: Disable generating pause frames in case of FW hung [SCSI] qla4xxx: Temperature monitoring for ISP82XX core. [SCSI] megaraid: fix sparse warnings [SCSI] sg: convert to kstrtoul_from_user() [SCSI] don't change sdev starvation list order without request dispatched [SCSI] isci: fix, prevent port from getting stuck in the 'configuring' state [SCSI] isci: fix start OOB [SCSI] isci: fix io failures while wide port links are coming up [SCSI] isci: allow more time for wide port targets [SCSI] isci: enable wide port targets [SCSI] isci: Fix IO fails when pull cable from phy in x4 wideport in MPC mode. ...
2012-01-16[SCSI] libfc: remove redundant timer init for fcpYi Zou1-3/+1
The fcp timer is already initialized when it gets allocated. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] fcoe: Move fcoe_debug_logging from fcoe.h to fcoe.cBart Van Assche2-18/+20
Move the definition of the global variable fcoe_debug_logging from fcoe.h to fcoe.c. Avoid that sparse complains about missing declarations for local functions or variables by declaring these static. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] libfc: Declare local functions staticBart Van Assche5-11/+13
Avoid that sparse complains about missing declarations for local functions by declaring these static or by adding an #include directive. Add the __percpu annotation where it is missing. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] fcoe: fix regression on offload em matching function for initiator/targetYi Zou1-4/+5
This is a regression introduced by commit 1ff9918b625457ce20d450d00f9ed0a12ba191b7 The else statement here is breaking the initiator logic of allocating xid from the offloaded em xid pool for READ I/O only to use DDP, as shown by the snippet of trace below, where the WRITE is using xid 0x5 from the offloaded em xid pool: Protocol VID Len S_ID D_ID OX_ID RX_ID Summary .. *FCP 228 96 0b.08.01 -> 01.0f.00 0x0005 0xffff SCSI: Write(10) LUN: 0x00 FCP 228 76 01.0f.00 -> 0b.08.01 0x0005 0x828d XFER_RDY ... The bug is in the else statement, for both initiator and target, the new command will have FC frame header bit 23 (FC_FC_EX_CTX) cleared as it was originated from the initiator. Also, this is assuming the frame header is already filled up, which is only true for target since for initiator, this is a new frame and oem_match gets called when em tries get xid for this i/o before it is filled up and sent out. The fix is to check if there is a fc_fcp_pkt associated w/ this frame from fr_fsp(fp), since fr_fsp(fp) is NULL for tcm_fc target and non-I/O frame in initiator. This should also return true for target only if it is an FC_RCTL_DD_UNSOL_CMD and rx_id is not allocated. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] qla4xxx: Update driver version to 5.02.00-k12Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] qla4xxx: Cleanup modinfo displayKaren Higgins1-16/+17
Beautify modinfo display. Display correct info for ql4xextended_error_logging [jejb: fixup checkpatch warning] Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] qla4xxx: Clear the RISC interrupt bit during FW initSarang Radke2-0/+8
This patch fix kernel panic during kdump. Signed-off-by: Sarang Radke <sarang.radke@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] qla4xxx: Added error logging for firmware abortNilesh Javali2-0/+9
Added debug print with error code in case of firmware error. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] qla4xxx: Disable generating pause frames in case of FW hungGiridhar Malavali3-0/+20
In case of FW hung ISP82xx generates continuous pause frames which causes switch to disable port. Added fix to disable generating pause frames in case of FW hung Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] qla4xxx: Temperature monitoring for ISP82XX core.Mike Hernandez3-4/+58
During watchdog, need to monitor temperature of ISP82XX core and set device state to FAILED when temperature reaches "Panic" level. Signed-off-by: Mike Hernandez <michael.hernandez@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] megaraid: fix sparse warningsadam radford1-5/+8
There's a zero day mistake in the megaraid driver in that the code that obtains the version number does a >> 8 on a char quantity. This >>8 causes a sparse warning because it always produces zero. Al Viro suggested these shifts should be >> 4 thus treating the firmware version as a BCD quantity. However, in the interests of safety we've elected to replace the >> 8 quantities with an explicit zero, thus quieting the sparse warning while preserving the same (albeit incorrect) version number as had previously been seen. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] sg: convert to kstrtoul_from_user()Stephen Boyd1-14/+11
Instead of open coding this function use kstrtoul_from_user() directly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] don't change sdev starvation list order without request dispatchedShaohua Li1-6/+1
The sdev is deleted from starved list and then try to dispatch from this device. It's quite possible the sdev can't eventually dispatch a request, then the sdev will be in starved list tail. This isn't fair. There are two cases here: 1. unplug path. scsi_request_fn() calls to scsi_target_queue_ready(), then the dev is removed from starved list, but quite possible host queue isn't ready, the dev is moved to starved list without dispatching any request. 2. scsi_run_queue path. It deletes the dev from starved list first (both global and local starved lists), then handles the dev. Then we could have the same process like case 1. This patch fixes the first case. Case 2 isn't fixed, because there is a rare case scsi_run_queue finds host isn't busy but scsi_request_fn finds host is busy (other CPU is faster to get host queue depth). Not deleting the dev from starved list in scsi_run_queue will keep scsi_run_queue looping (though this is very rare case, because host will become busy). Fortunately fixing case 1 already gives big improvement for starvation in my test. In a 12 disk JBOD setup, running file creation under EXT4, this gives 12% more throughput. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: fix, prevent port from getting stuck in the 'configuring' stateMarcin Tomczak2-42/+56
When expander connected in x2 or x4 mode and with IO runnning, if a cable from wideport is plugged out from the phy, IO's start failing on all the targets. Observed that when cable is pulled with IO running, cominit is happening on all the links and IO's start dropping to 0 and eventually the whole IO fails. Second observation, target is trying to open and SCU is responding with "Open reject no destination". A cause of the problem is when the port went from the "ready configuring substate" back to "ready configuring substate" as a result of phy being pulled off, scic suspended the port task scheduler register. As a result no IO was allowed and in the "substate configuring enter" routine the IO never goes back to 0. As a result the port never comes out of "ready substate configuring". The patch adds a mechanism of activate and deactivate phy when a port link up, which fixes the problem. Signed-off-by: Bartek Nowakowski <bartek.nowakowski@intel.com> Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: fix start OOBMarcin Tomczak1-17/+18
Split scu_link_layer_start_oob function to reset and enable and add flush after all steps. Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: fix io failures while wide port links are coming upMarcin Tomczak2-16/+76
When the first phy of a wide port comes up, don't report the port ready yet, always wait for 250 miliseconds then config the port with all phys added to the port. So that we can avoid reporting wide port device too early to kernel, which caused the first IOs (report luns, inquirys) failed due to not all the phys are configured into its port. Changes also made that the phys in a wide port don't need to go through half second wait time for consuming power. Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: allow more time for wide port targetsMarcin Tomczak1-1/+1
When hot insert the wide port device through the mini-sas port, the first IOs (Report Luns or Inquiry) may fail due to the device trying to open to a SCU phy that is still in suspended state. This IO failure causes the wide port device stuck in UPDATING_PORT_WIDTH state. Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: enable wide port targetsBartek Nowakowski3-4/+12
Arrange for task_contexts prepared for the wide targets to account for all the attached phys in the port. Signed-off-by: Bartek Nowakowski <bartek.nowakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: Fix IO fails when pull cable from phy in x4 wideport in MPC mode.Marcin Tomczak1-3/+7
Failure seen pulling a cable from a x4 port configured in manual port configuration (MPC) mode (MPC mode is set by the the OEM paramaters provided by the platform or isci_firmware.bin). While IO running to devices behind and expander, plugging out the cable from phy is causing IO failures and IO drops on disks and never recover. It happens because during link up/down the phy were being taken out of the port. Fix: during link down the phy is kept in the same logical port. Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: update version to 1.1Dan Williams2-6/+1
Bump the version now that the driver has atapi support and the initial round of hotplug fixes. The EXPERIMENTAL tag should have been removed a while back. While we're here also kill the "select SCSI_SAS_HOST_SMP" as the build error was separately fixed by commit d962480e "[SCSI] libsas: fix try_test_sas_gpio_gp_bit() build error". Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: remove unused 'isci_tmf->device' fieldMaciej Trela2-5/+4
As the field was never set, isci_print_tmf() using 'isci_tmf->device' sometimes causes a kernel crash if the dev_dbg() statement is enabled. Remove the unused field both from isci_tmf struct definition and from isci_print_tmf() Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: link speeds default to gen 2Jeff Skirvin2-3/+4
Gen-3 operation is marginal, default to gen-2 for now. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: performance-fix, shorten default "no outbound task" timeoutMarcin Tomczak2-2/+2
"No task timeout timer reduced from 20 to 2 This timer controls how long the SCU hardware will hold open the TX side of the connection before sending a DONE. The timer allows the hardware to attempt to optimize the DONE/CLOSE behavior to allow for new COMMAND IU to be posted. In practice closing the connection quicker is better." Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: oem parameter format v1.3 (cable select)Jeff Skirvin5-5/+111
v1.3 allows the attenuation of the attached cables to be specified to the driver in terms of 'short', 'medium', and 'long' (see probe_roms.h). These settings (per phy) are retrieved from the platform oem-parameters (BIOS rom) or via a module parameter override. Reviewed-by: Jiangbi Liu <jiangbi.liu@intel.com> Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: oem parameter format v1.1 (ssc select)Dave Jiang4-6/+148
v1.1 allows finer grained tuning of the SSC (spread-spectrum-clocking) settings for SAS and SATA. See notes in probe_roms.h Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: update afe (analog-front-end) recipe for C1Jeff Skirvin4-26/+103
C1 silicon requires updates to the phy tuning recipe and also support for user provided cable selects (per-phy) for short, medium, and long cables. Default to 'short' awaiting support for selecting the cable via oem parameters. Reviewed-by: Jiangbi Liu <jiangbi.liu@intel.com> Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com> Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci: cleanup oem parameter and recipe handlingDan Williams2-102/+86
Before updating the code to support the latest platform updates and silicon revision cleanup some of the long deref chains. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] isci, firmware: Remove isci fallback parameter blob and generatorBen Hutchings4-231/+0
This parameter blob and generator program have been moved to the linux-firmware.git repository. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] megaraid_sas: Version and Changelog updateadam radford2-4/+4
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] megaraid_sas: remove poll_mode_io codeadam radford2-143/+0
This code has never worked correctly, doesn't disable interrupts when set as a module parameter, doesn't disable interrupts when set after driver load time in sysfs node, etc. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] megaraid_sas: mask off flags in ioctl pathadam radford1-0/+2
Mask off flags in the ioctl path to prevent memory scribble with older MegaCLI versions. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] megaraid_sas: Fix reglockFlags for degraded raid5/6adam radford1-1/+3
The following patch for megaraid_sas fixes the reglockFlags field for degraded raid5/6 for MR9360/9380, which will result in a performance improvement. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] hpsa: do not sleep in atomic context in rmmod path.Stephen M. Cameron1-0/+2
Don't call kthread_stop with a spin lock held and interrupts disabled because kthread_stop will sleep waiting for the thread to stop. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16[SCSI] scsi_transport_fc: Clear Devloss Callback Done flag in ↵James Smart1-1/+2
fc_remote_port_rolechg This patch fixes a bug where devloss is not called on fc_host teardown. The issue is seen if the LLDD uses rport_rolechg to add the target role to an rport. When an rport goes away, the LLDD will call fc_remote_port_delete, which will start the devloss timer. If the timer expires, the transport will call the devloss callback and set the FC_RPORT_DEVLOSS_CALLBK_DONE flag. However, the rport structure is not deleted, it is retained to store the SCSI id mappings for the rport in case it comes back. In the scenario where it does come back, and the driver calls fc_remote_port_add, but does not indicate the "target" role for the rport - the create will clear the structure, but forgets to clear FC_RPORT_DEVLOSS_CALLBK_DONE flag (which is cleared if it's added with the target role). The secondary call, of fc_remote_port_rolechg to add the target role also does not clear the flag. Thus, the next time the rport goes away, the resulting devloss timer expiration will not call the driver callback as the flag is still set. This patch adds the FC_RPORT_DEVLOSS_CALLBK_DONE flags to the list of those that are cleared upon reuse of the rport structure. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-15Merge branch 'for-3.3/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
* 'for-3.3/core' of git://git.kernel.dk/linux-block: (37 commits) Revert "block: recursive merge requests" block: Stop using macro stubs for the bio data integrity calls blockdev: convert some macros to static inlines fs: remove unneeded plug in mpage_readpages() block: Add BLKROTATIONAL ioctl block: Introduce blk_set_stacking_limits function block: remove WARN_ON_ONCE() in exit_io_context() block: an exiting task should be allowed to create io_context block: ioc_cgroup_changed() needs to be exported block: recursive merge requests block, cfq: fix empty queue crash caused by request merge block, cfq: move icq creation and rq->elv.icq association to block core block, cfq: restructure io_cq creation path for io_context interface cleanup block, cfq: move io_cq exit/release to blk-ioc.c block, cfq: move icq cache management to block core block, cfq: move io_cq lookup to blk-ioc.c block, cfq: move cfqd->icq_list to request_queue and add request->elv.icq block, cfq: reorganize cfq_io_context into generic and cfq specific parts block: remove elevator_queue->ops block: reorder elevator switch sequence ... Fix up conflicts in: - block/blk-cgroup.c Switch from can_attach_task to can_attach - block/cfq-iosched.c conflict with now removed cic index changes (we now use q->id instead)
2012-01-14Merge branch 'for-linus' of git://selinuxproject.org/~jmorris/linux-securityLinus Torvalds1-1/+1
* 'for-linus' of git://selinuxproject.org/~jmorris/linux-security: capabilities: remove __cap_full_set definition security: remove the security_netlink_recv hook as it is equivalent to capable() ptrace: do not audit capability check when outputing /proc/pid/stat capabilities: remove task_ns_* functions capabitlies: ns_capable can use the cap helpers rather than lsm call capabilities: style only - move capable below ns_capable capabilites: introduce new has_ns_capabilities_noaudit capabilities: call has_ns_capability from has_capability capabilities: remove all _real_ interfaces capabilities: introduce security_capable_noaudit capabilities: reverse arguments to security_capable capabilities: remove the task from capable LSM hook entirely selinux: sparse fix: fix several warnings in the security server cod selinux: sparse fix: fix warnings in netlink code selinux: sparse fix: eliminate warnings for selinuxfs selinux: sparse fix: declare selinux_disable() in security.h selinux: sparse fix: move selinux_complete_init selinux: sparse fix: make selinux_secmark_refcount static SELinux: Fix RCU deref check warning in sel_netport_insert() Manually fix up a semantic mis-merge wrt security_netlink_recv(): - the interface was removed in commit fd7784615248 ("security: remove the security_netlink_recv hook as it is equivalent to capable()") - a new user of it appeared in commit a38f7907b926 ("crypto: Add userspace configuration API") causing no automatic merge conflict, but Eric Paris pointed out the issue.
2012-01-14block: fail SCSI passthrough ioctls on partition devicesPaolo Bonzini1-2/+9
Linux allows executing the SG_IO ioctl on a partition or LVM volume, and will pass the command to the underlying block device. This is well-known, but it is also a large security problem when (via Unix permissions, ACLs, SELinux or a combination thereof) a program or user needs to be granted access only to part of the disk. This patch lets partitions forward a small set of harmless ioctls; others are logged with printk so that we can see which ioctls are actually sent. In my tests only CDROM_GET_CAPABILITY actually occurred. Of course it was being sent to a (partition on a) hard disk, so it would have failed with ENOTTY and the patch isn't changing anything in practice. Still, I'm treating it specially to avoid spamming the logs. In principle, this restriction should include programs running with CAP_SYS_RAWIO. If for example I let a program access /dev/sda2 and /dev/sdb, it still should not be able to read/write outside the boundaries of /dev/sda2 independent of the capabilities. However, for now programs with CAP_SYS_RAWIO will still be allowed to send the ioctls. Their actions will still be logged. This patch does not affect the non-libata IDE driver. That driver however already tests for bd != bd->bd_contains before issuing some ioctl; it could be restricted further to forbid these ioctls even for programs running with CAP_SYS_ADMIN/CAP_SYS_RAWIO. Cc: linux-scsi@vger.kernel.org Cc: Jens Axboe <axboe@kernel.dk> Cc: James Bottomley <JBottomley@parallels.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [ Make it also print the command name when warning - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-14block: add and use scsi_blk_cmd_ioctlPaolo Bonzini1-1/+1
Introduce a wrapper around scsi_cmd_ioctl that takes a block device. The function will then be enhanced to detect partition block devices and, in that case, subject the ioctls to whitelisting. Cc: linux-scsi@vger.kernel.org Cc: Jens Axboe <axboe@kernel.dk> Cc: James Bottomley <JBottomley@parallels.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell4-5/+5
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-11Merge branch 'linux-next' of ↵Linus Torvalds2-7/+61
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits) x86/PCI: Expand the x86_msi_ops to have a restore MSIs. PCI: Increase resource array mask bit size in pcim_iomap_regions() PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT) PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB x86/PCI: amd: factor out MMCONFIG discovery PCI: Enable ATS at the device state restore PCI: msi: fix imbalanced refcount of msi irq sysfs objects PCI: kconfig: English typo in pci/pcie/Kconfig PCI/PM/Runtime: make PCI traces quieter PCI: remove pci_create_bus() xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus() x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented() x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources sparc/PCI: convert to pci_create_root_bus() sh/PCI: convert to pci_scan_root_bus() for correct root bus resources powerpc/PCI: convert to pci_create_root_bus() powerpc/PCI: split PHB part out of pcibios_map_io_space() ... Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due to the same patches being applied in other branches.
2012-01-10[SCSI] scsi_dh_alua: Retry the check-condition in case Mode Parameters ChangedMoger, Babu1-0/+5
This patch adds a check-condition in scsi_dh_alua handler for a retry. Sometimes, I have seen attach failing due to this check-condition with following error messages on NetApp E series storage. Dec 7 15:31:01 nilgiris kernel: [102979.696673] scsi 3:0:2:9: alua: port group 00 rel port 01 Dec 7 15:31:01 nilgiris kernel: [102979.697082] scsi 3:0:2:9: alua: rtpg failed with 8000002 Dec 7 15:31:01 nilgiris kernel: [102979.697086] scsi 3:0:2:9: alua: rtpg sense code 06/2a/01 Dec 7 15:31:01 nilgiris kernel: [102979.697088] scsi 3:0:2:9: alua: not attached Signed-off-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-10[SCSI] bfa: Implement LUN Masking feature using the SCSI Slave Callouts.Krishna Gudipati6-4/+112
This patch re-implements LUN Masking feature using SCSI Slave Callouts. With the new design in the slave_alloc entry point; for each new LUN discovered we check with our internal LUN Masking config whether to expose or to mask this particular LUN. We return -ENXIO (No such device or address) from slave_alloc for the LUNs we don't want to be exposed. We also notify the SCSI mid-layer to do a sequential LUN scan rather than REPORT_LUNS based scan if LUN masking is enabled on our HBA port, since a -ENXIO from any LUN in REPORT_LUNS based scan translates to a scan abort. This patch also handles the dynamic lun masking config change from enable to disable or vice-versa by resetting sdev_bflags of LUN 0 appropriately. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-10[SCSI] bfa: Revert back the current LUN Masking Implementation.Krishna Gudipati5-582/+2
This patch reverts the current LUN Masking Implementation. We re-implemented this feature using the SCSI Slave Callout's as per the review comments. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-10[SCSI] bfa: Fix possible NULL pointer dereference in lunmask add/delete.Krishna Gudipati1-2/+4
Patch fixes the possible NULL pointer dereference when we try to add or delete a rpwwn to the lunmask config which is not zoned to this port. Check if the FCS rport is not NULL before de-referencing it. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-10[SCSI] fcoe: remove double check if skb is nonlinearRobert Love1-2/+1
skb_linearize already has a check for skb_is_nonlinear, there is no need to duplicate the check in fcoe.c. This patch simply removes the unnecessary check and calls skb_linearize unconditionally. Reported-by: patrick kelle <patrick.kelle81@gmail.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: patrick kelle <patrick.kelle81@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-10[SCSI] qla4xxx: Update driver version to 5.02.00-k11Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>