summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain31-206/+220
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds3-12/+10
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds206-2852/+6851
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: smarpqi, lpfc, qedi, megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have a pile of annotation, unused variable and minor updates. The big API change is the updates for Christoph's DMA rework which include removing the DISABLE_CLUSTERING flag. And finally there are a couple of target tree updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits) scsi: isci: request: mark expected switch fall-through scsi: isci: remote_node_context: mark expected switch fall-throughs scsi: isci: remote_device: Mark expected switch fall-throughs scsi: isci: phy: Mark expected switch fall-through scsi: iscsi: Capture iscsi debug messages using tracepoints scsi: myrb: Mark expected switch fall-throughs scsi: megaraid: fix out-of-bound array accesses scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through scsi: fcoe: remove set but not used variable 'port' scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() scsi: smartpqi: fix build warnings scsi: smartpqi: update driver version scsi: smartpqi: add ofa support scsi: smartpqi: increase fw status register read timeout scsi: smartpqi: bump driver version scsi: smartpqi: add smp_utils support scsi: smartpqi: correct lun reset issues scsi: smartpqi: correct volume status scsi: smartpqi: do not offline disks for transient did no connect conditions scsi: smartpqi: allow for larger raid maps ...
2018-12-28Merge tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-blockLinus Torvalds37-936/+321
Pull block updates from Jens Axboe: "This is the main pull request for block/storage for 4.21. Larger than usual, it was a busy round with lots of goodies queued up. Most notable is the removal of the old IO stack, which has been a long time coming. No new features for a while, everything coming in this week has all been fixes for things that were previously merged. This contains: - Use atomic counters instead of semaphores for mtip32xx (Arnd) - Cleanup of the mtip32xx request setup (Christoph) - Fix for circular locking dependency in loop (Jan, Tetsuo) - bcache (Coly, Guoju, Shenghui) * Optimizations for writeback caching * Various fixes and improvements - nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith) * host and target support for NVMe over TCP * Error log page support * Support for separate read/write/poll queues * Much improved polling * discard OOM fallback * Tracepoint improvements - lightnvm (Hans, Hua, Igor, Matias, Javier) * Igor added packed metadata to pblk. Now drives without metadata per LBA can be used as well. * Fix from Geert on uninitialized value on chunk metadata reads. * Fixes from Hans and Javier to pblk recovery and write path. * Fix from Hua Su to fix a race condition in the pblk recovery code. * Scan optimization added to pblk recovery from Zhoujie. * Small geometry cleanup from me. - Conversion of the last few drivers that used the legacy path to blk-mq (me) - Removal of legacy IO path in SCSI (me, Christoph) - Removal of legacy IO stack and schedulers (me) - Support for much better polling, now without interrupts at all. blk-mq adds support for multiple queue maps, which enables us to have a map per type. This in turn enables nvme to have separate completion queues for polling, which can then be interrupt-less. Also means we're ready for async polled IO, which is hopefully coming in the next release. - Killing of (now) unused block exports (Christoph) - Unification of the blk-rq-qos and blk-wbt wait handling (Josef) - Support for zoned testing with null_blk (Masato) - sx8 conversion to per-host tag sets (Christoph) - IO priority improvements (Damien) - mq-deadline zoned fix (Damien) - Ref count blkcg series (Dennis) - Lots of blk-mq improvements and speedups (me) - sbitmap scalability improvements (me) - Make core inflight IO accounting per-cpu (Mikulas) - Export timeout setting in sysfs (Weiping) - Cleanup the direct issue path (Jianchao) - Export blk-wbt internals in block debugfs for easier debugging (Ming) - Lots of other fixes and improvements" * tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits) kyber: use sbitmap add_wait_queue/list_del wait helpers sbitmap: add helpers for add/del wait queue handling block: save irq state in blkg_lookup_create() dm: don't reuse bio for flushes nvme-pci: trace SQ status on completions nvme-rdma: implement polling queue map nvme-fabrics: allow user to pass in nr_poll_queues nvme-fabrics: allow nvmf_connect_io_queue to poll nvme-core: optionally poll sync commands block: make request_to_qc_t public nvme-tcp: fix spelling mistake "attepmpt" -> "attempt" nvme-tcp: fix endianess annotations nvmet-tcp: fix endianess annotations nvme-pci: refactor nvme_poll_irqdisable to make sparse happy nvme-pci: only set nr_maps to 2 if poll queues are supported nvmet: use a macro for default error location nvmet: fix comparison of a u16 with -1 blk-mq: enable IO poll if .nr_queues of type poll > 0 blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight() blk-mq: skip zero-queue maps in blk_mq_map_swqueue ...
2018-12-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-2/+1
Pull networking updates from David Miller: 1) New ipset extensions for matching on destination MAC addresses, from Stefano Brivio. 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to nfp driver. From Stefano Brivio. 3) Implement GRO for plain UDP sockets, from Paolo Abeni. 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT bit so that we could support the entire vlan_tci value. 5) Rework the IPSEC policy lookups to better optimize more usecases, from Florian Westphal. 6) Infrastructure changes eliminating direct manipulation of SKB lists wherever possible, and to always use the appropriate SKB list helpers. This work is still ongoing... 7) Lots of PHY driver and state machine improvements and simplifications, from Heiner Kallweit. 8) Various TSO deferral refinements, from Eric Dumazet. 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov. 10) Batch dropping of XDP packets in tuntap, from Jason Wang. 11) Lots of cleanups and improvements to the r8169 driver from Heiner Kallweit, including support for ->xmit_more. This driver has been getting some much needed love since he started working on it. 12) Lots of new forwarding selftests from Petr Machata. 13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel. 14) Packed ring support for virtio, from Tiwei Bie. 15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov. 16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu. 17) Implement coalescing on TCP backlog queue, from Eric Dumazet. 18) Implement carrier change in tun driver, from Nicolas Dichtel. 19) Support msg_zerocopy in UDP, from Willem de Bruijn. 20) Significantly improve garbage collection of neighbor objects when the table has many PERMANENT entries, from David Ahern. 21) Remove egdev usage from nfp and mlx5, and remove the facility completely from the tree as it no longer has any users. From Oz Shlomo and others. 22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and therefore abort the operation before the commit phase (which is the NETDEV_CHANGEADDR event). From Petr Machata. 23) Add indirect call wrappers to avoid retpoline overhead, and use them in the GRO code paths. From Paolo Abeni. 24) Add support for netlink FDB get operations, from Roopa Prabhu. 25) Support bloom filter in mlxsw driver, from Nir Dotan. 26) Add SKB extension infrastructure. This consolidates the handling of the auxiliary SKB data used by IPSEC and bridge netfilter, and is designed to support the needs to MPTCP which could be integrated in the future. 27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits) net: dccp: fix kernel crash on module load drivers/net: appletalk/cops: remove redundant if statement and mask bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw net/net_namespace: Check the return value of register_pernet_subsys() net/netlink_compat: Fix a missing check of nla_parse_nested ieee802154: lowpan_header_create check must check daddr net/mlx4_core: drop useless LIST_HEAD mlxsw: spectrum: drop useless LIST_HEAD net/mlx5e: drop useless LIST_HEAD iptunnel: Set tun_flags in the iptunnel_metadata_reply from src net/mlx5e: fix semicolon.cocci warnings staging: octeon: fix build failure with XFRM enabled net: Revert recent Spectre-v1 patches. can: af_can: Fix Spectre v1 vulnerability packet: validate address length if non-zero nfc: af_nfc: Fix Spectre v1 vulnerability phonet: af_phonet: Fix Spectre v1 vulnerability net: core: Fix Spectre v1 vulnerability net: minor cleanup in skb_ext_add() net: drop the unused helper skb_ext_get() ...
2018-12-22Merge tag 'scsi-fixes' of ↵Linus Torvalds1-4/+19
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is two simple target fixes and one discard related I/O starvation problem in sd. The discard problem occurs because the discard page doesn't have a mempool backing so if the allocation fails due to memory pressure, we then lose the forward progress we require if the writeout is on the same device. The fix is to back it with a mempool" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: use mempool for discard special page scsi: target: iscsi: cxgbit: add missing spin_lock_init() scsi: target: iscsi: cxgbit: fix csk leak
2018-12-20scsi: isci: request: mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that, in this particular case, a dash is added as a token in order to separate the "Fall through" annotation from the rest of the comment on the same line, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20scsi: isci: remote_node_context: mark expected switch fall-throughsGustavo A. R. Silva1-2/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that, in this particular case, a dash is added as a token in order to separate the "Fall through" annotations from the rest of the comment on the same line, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20scsi: isci: remote_device: Mark expected switch fall-throughsGustavo A. R. Silva1-2/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that, in this particular case, a dash is added as a token in order to separate the "fall through" annotations from the rest of the comment on the same line, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20scsi: isci: phy: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 703127 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20scsi: iscsi: Capture iscsi debug messages using tracepointsFred Herard4-1/+51
This commit enhances iscsi initiator modules to capture iscsi debug messages using linux kernel tracepoint facility: https://www.kernel.org/doc/Documentation/trace/tracepoints.txt The following tracepoint events have been created under the iscsi tracepoint event group: iscsi_dbg_conn - to capture connection debug messages (libiscsi module) iscsi_dbg_session - to capture session debug messages (libiscsi module) iscsi_dbg_eh - to capture error handling debug messages (libiscsi module) iscsi_dbg_tcp - to capture iscsi tcp debug messages (libiscsi_tcp module) iscsi_dbg_sw_tcp - to capture iscsi sw tcp debug messages (iscsi_tcp module) iscsi_dbg_trans_session - to cpature iscsi transsport sess debug messages (scsi_transport_iscsi module) iscsi_dbg_trans_conn - to capture iscsi transport conn debug messages (scsi_transport_iscsi module) [mkp: typos] Signed-off-by: Fred Herard <fred.herard@oracle.com> Reviewed-by: Rajan Shanmugavelu <rajan.shanmugavelu@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20scsi: myrb: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+3
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1465234 ("Missing break in switch") Addresses-Coverity-ID: 1465238 ("Missing break in switch") Addresses-Coverity-ID: 1465242 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20scsi: megaraid: fix out-of-bound array accessesQian Cai2-2/+2
UBSAN reported those with MegaRAID SAS-3 3108, [ 77.467308] UBSAN: Undefined behaviour in drivers/scsi/megaraid/megaraid_sas_fp.c:117:32 [ 77.475402] index 255 is out of range for type 'MR_LD_SPAN_MAP [1]' [ 77.481677] CPU: 16 PID: 333 Comm: kworker/16:1 Not tainted 4.20.0-rc5+ #1 [ 77.488556] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018 [ 77.495791] Workqueue: events work_for_cpu_fn [ 77.500154] Call trace: [ 77.502610] dump_backtrace+0x0/0x2c8 [ 77.506279] show_stack+0x24/0x30 [ 77.509604] dump_stack+0x118/0x19c [ 77.513098] ubsan_epilogue+0x14/0x60 [ 77.516765] __ubsan_handle_out_of_bounds+0xfc/0x13c [ 77.521767] mr_update_load_balance_params+0x150/0x158 [megaraid_sas] [ 77.528230] MR_ValidateMapInfo+0x2cc/0x10d0 [megaraid_sas] [ 77.533825] megasas_get_map_info+0x244/0x2f0 [megaraid_sas] [ 77.539505] megasas_init_adapter_fusion+0x9b0/0xf48 [megaraid_sas] [ 77.545794] megasas_init_fw+0x1ab4/0x3518 [megaraid_sas] [ 77.551212] megasas_probe_one+0x2c4/0xbe0 [megaraid_sas] [ 77.556614] local_pci_probe+0x7c/0xf0 [ 77.560365] work_for_cpu_fn+0x34/0x50 [ 77.564118] process_one_work+0x61c/0xf08 [ 77.568129] worker_thread+0x534/0xa70 [ 77.571882] kthread+0x1c8/0x1d0 [ 77.575114] ret_from_fork+0x10/0x1c [ 89.240332] UBSAN: Undefined behaviour in drivers/scsi/megaraid/megaraid_sas_fp.c:117:32 [ 89.248426] index 255 is out of range for type 'MR_LD_SPAN_MAP [1]' [ 89.254700] CPU: 16 PID: 95 Comm: kworker/u130:0 Not tainted 4.20.0-rc5+ #1 [ 89.261665] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018 [ 89.268903] Workqueue: events_unbound async_run_entry_fn [ 89.274222] Call trace: [ 89.276680] dump_backtrace+0x0/0x2c8 [ 89.280348] show_stack+0x24/0x30 [ 89.283671] dump_stack+0x118/0x19c [ 89.287167] ubsan_epilogue+0x14/0x60 [ 89.290835] __ubsan_handle_out_of_bounds+0xfc/0x13c [ 89.295828] MR_LdRaidGet+0x50/0x58 [megaraid_sas] [ 89.300638] megasas_build_io_fusion+0xbb8/0xd90 [megaraid_sas] [ 89.306576] megasas_build_and_issue_cmd_fusion+0x138/0x460 [megaraid_sas] [ 89.313468] megasas_queue_command+0x398/0x3d0 [megaraid_sas] [ 89.319222] scsi_dispatch_cmd+0x1dc/0x8a8 [ 89.323321] scsi_request_fn+0x8e8/0xdd0 [ 89.327249] __blk_run_queue+0xc4/0x158 [ 89.331090] blk_execute_rq_nowait+0xf4/0x158 [ 89.335449] blk_execute_rq+0xdc/0x158 [ 89.339202] __scsi_execute+0x130/0x258 [ 89.343041] scsi_probe_and_add_lun+0x2fc/0x1488 [ 89.347661] __scsi_scan_target+0x1cc/0x8c8 [ 89.351848] scsi_scan_channel.part.3+0x8c/0xc0 [ 89.356382] scsi_scan_host_selected+0x130/0x1f0 [ 89.361002] do_scsi_scan_host+0xd8/0xf0 [ 89.364927] do_scan_async+0x9c/0x320 [ 89.368594] async_run_entry_fn+0x138/0x420 [ 89.372780] process_one_work+0x61c/0xf08 [ 89.376793] worker_thread+0x13c/0xa70 [ 89.380546] kthread+0x1c8/0x1d0 [ 89.383778] ret_from_fork+0x10/0x1c This is because when populating Driver Map using firmware raid map, all non-existing VDs set their ldTgtIdToLd to 0xff, so it can be skipped later. From drivers/scsi/megaraid/megaraid_sas_base.c , memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS); From drivers/scsi/megaraid/megaraid_sas_fp.c , /* For non existing VDs, iterate to next VD*/ if (ld >= (MAX_LOGICAL_DRIVES_EXT - 1)) continue; However, there are a few places that failed to skip those non-existing VDs due to off-by-one errors. Then, those 0xff leaked into MR_LdRaidGet(0xff, map) and triggered the out-of-bound accesses. Fixes: 51087a8617fe ("megaraid_sas : Extended VD support") Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1475400 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20scsi: fcoe: remove set but not used variable 'port'YueHaibing1-4/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/fcoe/fcoe.c: In function 'fcoe_recv_frame': drivers/scsi/fcoe/fcoe.c:1672:20: warning: variable 'port' set but not used [-Wunused-but-set-variable] drivers/scsi/fcoe/fcoe.c: In function 'fcoe_device_notification': drivers/scsi/fcoe/fcoe.c:1861:20: warning: variable 'port' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()Yanjiang Jin1-0/+1
We must free all irqs during shutdown, else kexec's 2nd kernel would hang in pqi_wait_for_completion_io() as below: Call trace: pqi_wait_for_completion_io pqi_submit_raid_request_synchronous.constprop.78+0x23c/0x310 [smartpqi] pqi_configure_events+0xec/0x1f8 [smartpqi] pqi_ctrl_init+0x814/0xca0 [smartpqi] pqi_pci_probe+0x400/0x46c [smartpqi] local_pci_probe+0x48/0xb0 pci_device_probe+0x14c/0x1b0 really_probe+0x218/0x3fc driver_probe_device+0x70/0x140 __driver_attach+0x11c/0x134 bus_for_each_dev+0x70/0xc8 driver_attach+0x30/0x38 bus_add_driver+0x1f0/0x294 driver_register+0x74/0x12c __pci_register_driver+0x64/0x70 pqi_init+0xd0/0x10000 [smartpqi] do_one_initcall+0x60/0x1d8 do_init_module+0x64/0x1f8 load_module+0x10ec/0x1350 __se_sys_finit_module+0xd4/0x100 __arm64_sys_finit_module+0x28/0x34 el0_svc_handler+0x104/0x160 el0_svc+0x8/0xc This happens only in the following combinations: 1. smartpqi is built as module, not built-in; 2. We have a disk connected to smartpqi card; 3. Both kexec's 1st and 2nd kernels use this disk as Rootfs' mount point. Signed-off-by: Yanjiang Jin <yanjiang.jin@hxt-semitech.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20scsi: smartpqi: fix build warningsDon Brace1-1/+3
Fix kbuild warning and fallout from linux-next -Wimplicit-fallthrough. [mkp: added fall through statements] Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-3/+3
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19scsi: smartpqi: update driver versionDon Brace1-2/+2
- need to bump up the driver version because of the OFA patch and the fw status register read timeout patch. Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add ofa supportMahesh Rajashekhara4-43/+634
- when OFA event occurs, driver will stop traffic to RAID/HBA path. Driver waits for all the outstanding requests to complete. - Driver sends OFA event acknowledgment to firmware. - Driver will wait until the new firmware is up and running. - Driver will free up the resources. - Driver calls SIS/PQI initialization and rescans the device list. - Driver will resume the traffic to RAID/HBA path. Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: increase fw status register read timeoutMahesh Rajashekhara1-1/+1
Problem: - during the driver initialization, driver will poll fw for KERNEL_UP in a 30 seconds timeout. - if the firmware is not ready after 30 seconds, driver will not be loaded. Fix: - change timeout from 30 seconds to 3 minutes. Reported-by: Feng Li <lifeng1519@gmail.com> Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com> Reviewed-by: Murthy Bhat <Murthy.Bhat@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: bump driver versionDon Brace1-3/+3
Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add smp_utils supportDon Brace3-60/+324
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: correct lun reset issuesKevin Barnett1-0/+3
Problem: The Linux kernel takes a logical volume offline after a LUN reset. This is generally accompanied by this message in the dmesg output: Device offlined - not ready after error recovery Root Cause: The root cause is a "quirk" in the timeout handling in the Linux SCSI layer. The Linux kernel places a 30-second timeout on most media access commands (reads and writes) that it send to device drivers. When a media access command times out, the Linux kernel goes into error recovery mode for the LUN that was the target of the command that timed out. Every command that timed out is kept on a list inside of the Linux kernel to be retried later. The kernel attempts to recover the command(s) that timed out by issuing a LUN reset followed by a TEST UNIT READY. If the LUN reset and TEST UNIT READY commands are successful, the kernel retries the command(s) that timed out. Each SCSI command issued by the kernel has a result field associated with it. This field indicates the final result of the command (success or error). When a command times out, the kernel places a value in this result field indicating that the command timed out. The "quirk" is that after the LUN reset and TEST UNIT READY commands are completed, the kernel checks each command on the timed-out command list before retrying it. If the result field is still "timed out", the kernel treats that command as not having been successfully recovered for a retry. If the number of commands that are in this state are greater than two, the kernel takes the LUN offline. Fix: When our RAIDStack receives a LUN reset, it simply waits until all outstanding commands complete. Generally, all of these outstanding commands complete successfully. Therefore, the fix in the smartpqi driver is to always set the command result field to indicate success when a request completes successfully. This normally isn’t necessary because the result field is always initialized to success when the command is submitted to the driver. So when the command completes successfully, the result field is left untouched. But in this case, the kernel changes the result field behind the driver’s back and then expects the field to be changed by the driver as the commands that timed-out complete. Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: correct volume statusDave Carroll1-0/+3
- fix race condition when a unit is deleted after an RLL, and before we have gotten the LV_STATUS page of the unit. - In this case we will get a standard inquiry, rather than the desired page. This will result in a unit presented which no longer exists. - If we ask for LV_STATUS, insure we get LV_STATUS Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: do not offline disks for transient did no connect conditionsDave Carroll1-2/+2
Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: allow for larger raid mapsAjish Koshy1-31/+28
Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Ajish Koshy <ajish.koshy@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: check for null device pointersMahesh Rajashekhara2-3/+64
- wait on all outstanding I/O to complete before the device is removed. - check for null device pointers in IO entry/completion functions. Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add support for huawei controllersAjish Koshy1-0/+24
Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Ajish Koshy <ajish.koshy@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: enhance numa node detectionSagar Biradar1-3/+7
- set pci_dev->dev to 0 only if the node is NO_NUMA_NODE. If not, do not reset the value but retain it. Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Sagar Biradar <sagar.biradar@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: wake up drives after os resumes from suspendDave Carroll1-0/+2
- set allow_restart option during scsi_device init. This allows the kernel to send a START/STOP Unit command to the drive if it encounters a 4/2 check condition in sense data. Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: fix disk name mount pointMurthy Bhat1-1/+6
- fix a formatting issue. Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Murthy Bhat <murthy.bhat@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add h3c ssidMurthy Bhat1-0/+8
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Murthy Bhat <murthy.bhat@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add sysfs attributesDave Carroll2-0/+235
- add sysfs device attributes, unique_id, lunid and path_info. Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: refactor sending controller raid requestsDave Carroll1-88/+46
Clean up the common code which creates a raid path request for the controller LUNID and sends it synchronously, into a common routine; Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: turn off lun data caching for ptraidDave Carroll2-6/+79
- allow update the luns for PTRAID devices. Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com> Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: correct host serial num for ssaMahesh Rajashekhara1-0/+3
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com> Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add no_write_same for logical volumesDave Carroll1-0/+7
During slave_alloc, for logical volumes include no_write_same into the scsi_device structure. This will insure that WRITE_SAME will not be used for LD's. Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com> Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: Add retries for device resetMahesh Rajashekhara2-1/+14
Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com> Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: smartpqi: add support for PQI Config Table handshakeKevin Barnett2-4/+293
Add support for new IUs and parsing of the Firmware Features section of the PQI Config Table to implement the "handshake" between the driver and firmware to communicate firmware features supported and enabled by the driver. Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com> Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com> Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: lpfc: Update lpfc version to 12.0.0.10James Smart1-1/+1
Update lpfc version to 12.0.0.10 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: lpfc: Adding ability to reset chip via pci bus resetJames Smart5-27/+233
This patch adds a "pci_bus_reset" option to the board_mode sysfs attribute. This option uses the pci_reset_bus() api to reset the PCIe link the adapter is on, which will reset the chip/adapter. Prior to issuing this option, all functions on the same chip must be placed in the offline state by the admin. After the reset, all of the instances may be brought online again. The primary purpose of this functionality is to support cases where firmware update required a chip reset but the admin did not want to reboot the machine in order to instantiate the firmware update. Sanity checks take place prior to the reset to ensure the adapter is the sole entity on the PCIe bus and that all functions are in the offline state. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: lpfc: Add log messages to aid in debugging fc4type discovery issuesJames Smart1-3/+45
Current messages report generic actions (like send GID_FT), but misses reporting for what protocol type the action is taken. Revise the messages to reflect the FC4 protocol type being worked on. [mkp: typo] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: lpfc: Fix discovery failure when PLOGI is deferedJames Smart2-2/+8
When a target's link dropped, an RSCN was received to communicate the change. The driver detected the loss of the target and issued and UNREG_RPI mailbox command. While that was being processed, another RSCN was received to communicate the port coming back. The driver deferred the PLOGI to the port until the mailbox command finishes. When the mailbox command completed it saw the pending port and called the routines to issue the PLOGI. However, it forgot to clear the UNREG_INP state flag, so the PLOGI xmt routine nooped the PLOGI request assuming it needed to wait for the mailbox command. At this point, login would never be re-attempted. Clear UNREG_INP before issuing the deferred PLOGI. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: lpfc: update fault value on successful trunk events.James Smart1-8/+4
Currently, when a trunk link goes down due to some fault, the driver snapshots the fault code. If the link then comes back up, meaning there is no fault, the driver is not clearing the fault code so the sysfs link_state entry reports old/stale data. Revise the logic so that on successful link up the fault code is cleared. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: lpfc: Correct MDS loopback diagnostics supportJames Smart1-15/+34
The existing MDS loopback diagnostics support processing received frames in the slowpath work thread. It caps the number of frames it will process at 64, before waiting for another event to indicate additional frame reception. The net-net is this results in very slow frame processing during loopback tests and sometimes orphans an io, causing the loopback test to report failure by the switch. Move MDS loopback frame processing out of the slow path worker thread and into the normal RQ processing routines. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: lpfc: Fix link state reporting for trunking when adapter is offlineJames Smart1-2/+14
If the adapter is taken offline, the trunk link port attributes continue to report trunk links as up even though all links are down as the adapter is offline. Clear the trunk links state as part of taking the adapter offline. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: bfa: clean up a couple of indentation issuesColin Ian King1-2/+2
There is a break statement with an extra space that needs removed and a call to bfa_trc that is indented one level too much. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: 3w-xxxx: fix indentation issue, add missing tabColin Ian King1-1/+1
There is a tab missing on a return statement, add the missing tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: csiostor: fix incorrect dma device in case of vportVarun Prakash1-1/+1
In case of ->vport_create() call scsi_add_host_with_dma() instead of scsi_add_host() to pass correct dma device. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 20:47:55 +0000