summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2019-04-13Merge tag 'for-linus-20190412' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull block fixes from Jens Axboe: "Set of fixes that should go into this round. This pull is larger than I'd like at this time, but there's really no specific reason for that. Some are fixes for issues that went into this merge window, others are not. Anyway, this contains: - Hardware queue limiting for virtio-blk/scsi (Dongli) - Multi-page bvec fixes for lightnvm pblk - Multi-bio dio error fix (Jason) - Remove the cache hint from the io_uring tool side, since we didn't move forward with that (me) - Make io_uring SETUP_SQPOLL root restricted (me) - Fix leak of page in error handling for pc requests (Jérôme) - Fix BFQ regression introduced in this merge window (Paolo) - Fix break logic for bio segment iteration (Ming) - Fix NVMe cancel request error handling (Ming) - NVMe pull request with two fixes (Christoph): - fix the initial CSN for nvme-fc (James) - handle log page offsets properly in the target (Keith)" * tag 'for-linus-20190412' of git://git.kernel.dk/linux-block: block: fix the return errno for direct IO nvmet: fix discover log page when offsets are used nvme-fc: correct csn initialization and increments on error block: do not leak memory in bio_copy_user_iov() lightnvm: pblk: fix crash in pblk_end_partial_read due to multipage bvecs nvme: cancel request synchronously blk-mq: introduce blk_mq_complete_request_sync() scsi: virtio_scsi: limit number of hw queues by nr_cpu_ids virtio-blk: limit number of hw queues by nr_cpu_ids block, bfq: fix use after free in bfq_bfqq_expire io_uring: restrict IORING_SETUP_SQPOLL to root tools/io_uring: remove IOCQE_FLAG_CACHEHIT block: don't use for-inside-for in bio_for_each_segment_all
2019-04-10scsi: virtio_scsi: limit number of hw queues by nr_cpu_idsDongli Zhang1-0/+1
When tag_set->nr_maps is 1, the block layer limits the number of hw queues by nr_cpu_ids. No matter how many hw queues are used by virtio-scsi, as it has (tag_set->nr_maps == 1), it can use at most nr_cpu_ids hw queues. In addition, specifically for pci scenario, when the 'num_queues' specified by qemu is more than maxcpus, virtio-scsi would not be able to allocate more than maxcpus vectors in order to have a vector for each queue. As a result, it falls back into MSI-X with one vector for config and one shared for queues. Considering above reasons, this patch limits the number of hw queues used by virtio-scsi by nr_cpu_ids. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-08scsi: csiostor: fix missing data copy in csio_scsi_err_handler()Varun Prakash1-1/+4
If scsi cmd sglist is not suitable for DDP then csiostor driver uses preallocated buffers for DDP, because of this data copy is required from DDP buffer to scsi cmd sglist before calling ->scsi_done(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03scsi: lpfc: Fix missing wakeups on abort threadsJames Smart1-4/+3
Abort thread wakeups, on some wqe types, are not happening. The thread wakeup logic is dependent upon the LPFC_DRIVER_ABORTED flag. However, on these wqes, the completion handler running prior to the io completion routine ends up clearing the flag. Rework the wakeup logic to look at a non-null waitq element which must be set if the abort thread is waiting. This is reverting the change in the indicated patch. Fixes: c2017260eea2d ("scsi: lpfc: Rework locking on SCSI io completion") Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03scsi: storvsc: Reduce default ring buffer size to 128 KbytesMichael Kelley1-1/+1
Reduce the default VMbus channel ring buffer size for storvsc SCSI devices from 1 Mbyte to 128 Kbytes. Measurements show that ring buffer sizes above 128 Kbytes do not increase performance even at very high IOPS rates, so don't waste the memory. Also remove the dependence on PAGE_SIZE, since the ring buffer size should not change on architectures where PAGE_SIZE is not 4 Kbytes. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03scsi: storvsc: Fix calculation of sub-channel countMichael Kelley1-2/+11
When the number of sub-channels offered by Hyper-V is >= the number of CPUs in the VM, calculate the correct number of sub-channels. The current code produces one too many. This scenario arises only when the number of CPUs is artificially restricted (for example, with maxcpus=<n> on the kernel boot line), because Hyper-V normally offers a sub-channel count < number of CPUs. While the current code doesn't break, the extra sub-channel is unbalanced across the CPUs (for example, a total of 5 channels on a VM with 4 CPUs). Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-03scsi: core: add new RDAC LENOVO/DE_Series deviceXose Vazquez Perez2-0/+2
Blacklist "Universal Xport" LUN. It's used for in-band storage array management. Also add model to the rdac dh family. Cc: Martin Wilck <mwilck@suse.com> Cc: Hannes Reinecke <hare@suse.de> Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com> Cc: Christophe Varoqui <christophe.varoqui@opensvc.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: DM ML <dm-devel@redhat.com> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-29scsi: qedi: remove declaration of nvm_image from stackColin Ian King1-5/+2
The nvm_image is a large struct qedi_nvm_iscsi_image object of over 24K so don't declare it on the stack just for a sizeof requirement; use sizeof on struct qedi_nvm_iscsi_image instead. Fixes: c77a2fa3ff8f ("scsi: qedi: Add the CRC size within iSCSI NVM image") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: ibmvfc: Clean up transport eventsTyrel Datwyler2-4/+11
No change to functionality. Simply make transport event messages a little clearer, and rework CRQ format enums such that we have separate enums for INIT messages and XPORT events. [mkp: typo] Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: ibmvfc: Byte swap status and error codes when loggingTyrel Datwyler1-13/+15
Status and error codes are returned in big endian from the VIOS. The values are translated into a human readable format when logged, but the values are also logged. This patch byte swaps those values so that they are consistent between BE and LE platforms. Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: ibmvfc: Add failed PRLI to cmd_status lookup arrayTyrel Datwyler1-0/+1
The VIOS uses the SCSI_ERROR class to report PRLI failures. These errors are indicated with the combination of a IBMVFC_FC_SCSI_ERROR return status and 0x8000 error code. Add these codes to cmd_status[] with appropriate human readable error message. Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: ibmvfc: Remove "failed" from logged errorsTyrel Datwyler1-1/+1
The text of messages logged with ibmvfc_log_error() always contain the term "failed". In the case of cancelled commands during EH they are reported back by the VIOS using error codes. This can be confusing to somebody looking at these log messages as to whether a command was successfully cancelled. The following real log message for example it is unclear if the transaction was actaully cancelled. <6>sd 0:0:1:1: Cancelling outstanding commands. <3>sd 0:0:1:1: [sde] Command (28) failed: transaction cancelled (2:6) flags: 0 fcp_rsp: 0, resid=0, scsi_status: 0 Remove prefixing of "failed" to all error logged messages. The ibmvfc_log_error() function translates the returned error/status codes to a human readable message already. Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: sd: Quiesce warning if device does not report optimal I/O sizeMartin K. Petersen1-0/+3
Commit a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of physical block size") split one conditional into several separate statements in an effort to provide more accurate warning messages when a device reports a nonsensical value. However, this reorganization accidentally dropped the precondition of the reported value being larger than zero. This lead to a warning getting emitted on devices that do not report an optimal I/O size at all. Remain silent if a device does not report an optimal I/O size. Fixes: a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of physical block size") Cc: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> Reported-by: Hussam Al-Tayeb <ht990332@gmx.com> Tested-by: Hussam Al-Tayeb <ht990332@gmx.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: sd: Fix a race between closing an sd device and sd I/OBart Van Assche1-6/+13
The scsi_end_request() function calls scsi_cmd_to_driver() indirectly and hence needs the disk->private_data pointer. Avoid that that pointer is cleared before all affected I/O requests have finished. This patch avoids that the following crash occurs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: scsi_mq_uninit_cmd+0x1c/0x30 scsi_end_request+0x7c/0x1b8 scsi_io_completion+0x464/0x668 scsi_finish_command+0xbc/0x160 scsi_eh_flush_done_q+0x10c/0x170 sas_scsi_recover_host+0x84c/0xa98 [libsas] scsi_error_handler+0x140/0x5b0 kthread+0x100/0x12c ret_from_fork+0x10/0x18 Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Jason Yan <yanaijie@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reported-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-27scsi: core: Run queue when state is set to running after being blockedzhengbin1-0/+6
Use dd to test a SCSI device: 1. echo "blocked" >/sys/block/sda/device/state 2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10 3. echo "running" >/sys/block/sda/device/state dd should finish this work after step 3, but it hangs. After step2, the call chain is this: blk_mq_dispatch_rq_list-->scsi_queue_rq-->prep_to_mq prep_to_mq will return BLK_STS_RESOURCE, and scsi_queue_rq will transition it to BLK_STS_DEV_RESOURCE which means that driver can guarantee that IO dispatch will be triggered in future when the resource is available. Need to follow the rule if we set the device state to running. [mkp: tweaked commit description and code comment as suggested by Bart] Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-25scsi: qla4xxx: fix a potential NULL pointer dereferenceKangjie Lu1-0/+2
In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Acked-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-25scsi: aacraid: Insure we don't access PCIe space during AER/EEHDave Carroll2-3/+8
There are a few windows during AER/EEH when we can access PCIe I/O mapped registers. This will harden the access to insure we do not allow PCIe access during errors Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-25scsi: mpt3sas: Fix kernel panic during expander resetSreekanth Reddy2-0/+18
During expander reset handling, the driver invokes kernel function scsi_host_find_tag() to obtain outstanding requests associated with the scsi host managed by the driver. Driver loops from tag value zero to hba queue depth to obtain the outstanding scmds. But when blk-mq is enabled, the block layer may return stale entry for one or more requests. This may lead to kernel panic if the returned value is inaccessible or the memory pointed by the returned value is reused. Reference of upstream discussion: https://patchwork.kernel.org/patch/10734933/ Instead of calling scsi_host_find_tag() API for each and every smid (smid is tag +1) from one to shost->can_queue, now driver will call this API (to obtain the outstanding scmd) only for those smid's which are outstanding at the driver level. Driver will determine whether this smid is outstanding at driver level by looking into it's corresponding MPI request frame, if its MPI request frame is empty, then it means that this smid is free and does not need to call scsi_host_find_tag() for it. By doing this, driver will invoke scsi_host_find_tag() for only those tags which are outstanding at the driver level. Driver will check whether particular MPI request frame is empty or not by looking into the "DevHandle" field. If this field is zero then it means that this MPI request is empty. For active MPI request DevHandle must be non-zero. Also driver will memset the MPI request frame once the corresponding scmd is processed (i.e. just before calling scmd->done function). Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-20scsi: ibmvscsi: Fix empty event pool access during host removalTyrel Datwyler1-6/+16
The event pool used for queueing commands is destroyed fairly early in the ibmvscsi_remove() code path. Since, this happens prior to the call so scsi_remove_host() it is possible for further calls to queuecommand to be processed which manifest as a panic due to a NULL pointer dereference as seen here: PANIC: "Unable to handle kernel paging request for data at address 0x00000000" Context process backtrace: DSISR: 0000000042000000 ????Syscall Result: 0000000000000000 4 [c000000002cb3820] memcpy_power7 at c000000000064204 [Link Register] [c000000002cb3820] ibmvscsi_send_srp_event at d000000003ed14a4 5 [c000000002cb3920] ibmvscsi_send_srp_event at d000000003ed14a4 [ibmvscsi] ?(unreliable) 6 [c000000002cb39c0] ibmvscsi_queuecommand at d000000003ed2388 [ibmvscsi] 7 [c000000002cb3a70] scsi_dispatch_cmd at d00000000395c2d8 [scsi_mod] 8 [c000000002cb3af0] scsi_request_fn at d00000000395ef88 [scsi_mod] 9 [c000000002cb3be0] __blk_run_queue at c000000000429860 10 [c000000002cb3c10] blk_delay_work at c00000000042a0ec 11 [c000000002cb3c40] process_one_work at c0000000000dac30 12 [c000000002cb3cd0] worker_thread at c0000000000db110 13 [c000000002cb3d80] kthread at c0000000000e3378 14 [c000000002cb3e30] ret_from_kernel_thread at c00000000000982c The kernel buffer log is overfilled with this log: [11261.952732] ibmvscsi: found no event struct in pool! This patch reorders the operations during host teardown. Start by calling the SRP transport and Scsi_Host remove functions to flush any outstanding work and set the host offline. LLDD teardown follows including destruction of the event pool, freeing the Command Response Queue (CRQ), and unmapping any persistent buffers. The event pool destruction is protected by the scsi_host lock, and the pool is purged prior of any requests for which we never received a response. Finally, move the removal of the scsi host from our global list to the end so that the host is easily locatable for debugging purposes during teardown. Cc: <stable@vger.kernel.org> # v2.6.12+ Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-20scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaitonTyrel Datwyler1-0/+5
For each ibmvscsi host created during a probe or destroyed during a remove we either add or remove that host to/from the global ibmvscsi_head list. This runs the risk of concurrent modification. This patch adds a simple spinlock around the list modification calls to prevent concurrent updates as is done similarly in the ibmvfc driver and ipr driver. Fixes: 32d6e4b6e4ea ("scsi: ibmvscsi: add vscsi hosts to global list_head") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-20scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()Luo Jiaxing1-0/+6
We found out that for v2 hw, a SATA disk can not be written to after the system comes up. In commit ffb1c820b8b6 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()"), we introduced a path where we may issue an internal abort for a SATA device, but without following it with a softreset. We need to always follow an internal abort with a software reset, as per HW programming flow, so add this. Fixes: ffb1c820b8b6 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()") Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: qla2xxx: Fix NULL pointer crash due to stale CPUIDHimanshu Madhani1-1/+1
This patch fixes crash due to NULL pointer derefrence because CPU pointer is not set and used by driver. Instead, driver is passes CPU as tag via ha->isp_ops->{lun_reset|target_reset} [ 30.160780] qla2xxx [0000:a0:00.1]-8038:9: Cable is unplugged... [ 69.984045] qla2xxx [0000:a0:00.0]-8009:8: DEVICE RESET ISSUED nexus=8:0:0 cmd=00000000b0d62f46. [ 69.992849] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [ 70.000680] PGD 0 P4D 0 [ 70.003232] Oops: 0000 [#1] SMP PTI [ 70.006727] CPU: 2 PID: 6714 Comm: sg_reset Kdump: loaded Not tainted 4.18.0-67.el8.x86_64 #1 [ 70.015258] Hardware name: NEC Express5800/T110j [N8100-2758Y]/MX32-PH0-NJ, BIOS F11 02/13/2019 [ 70.024016] RIP: 0010:blk_mq_rq_cpu+0x9/0x10 [ 70.028315] Code: 01 58 01 00 00 48 83 c0 28 48 3d 80 02 00 00 75 ab c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 08 <8b> 40 40 c3 0f 1f 00 0f 1f 44 00 00 48 83 ec 10 48 c7 c6 20 6e 7c [ 70.047087] RSP: 0018:ffff99a481487d58 EFLAGS: 00010246 [ 70.052322] RAX: 0000000000000000 RBX: ffffffffc041b08b RCX: 0000000000000000 [ 70.059466] RDX: 0000000000000000 RSI: ffff8d10b6b16898 RDI: ffff8d10b341e400 [ 70.066615] RBP: ffffffffc03a6bd0 R08: 0000000000000415 R09: 0000000000aaaaaa [ 70.073765] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d10b341e528 [ 70.080914] R13: ffff8d10aadefc00 R14: ffff8d0f64efa998 R15: ffff8d0f64efa000 [ 70.088083] FS: 00007f90a201e540(0000) GS:ffff8d10b6b00000(0000) knlGS:0000000000000000 [ 70.096188] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 70.101959] CR2: 0000000000000040 CR3: 0000000268886005 CR4: 00000000003606e0 [ 70.109127] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 70.116277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 70.123425] Call Trace: [ 70.125896] __qla2xxx_eh_generic_reset+0xb1/0x220 [qla2xxx] [ 70.131572] scsi_ioctl_reset+0x1f5/0x2a0 [ 70.135600] scsi_ioctl+0x18e/0x397 [ 70.139099] ? sd_ioctl+0x7c/0x100 [sd_mod] [ 70.143287] blkdev_ioctl+0x32b/0x9f0 [ 70.146954] ? __check_object_size+0xa3/0x181 [ 70.151323] block_ioctl+0x39/0x40 [ 70.154735] do_vfs_ioctl+0xa4/0x630 [ 70.158322] ? syscall_trace_enter+0x1d3/0x2c0 [ 70.162769] ksys_ioctl+0x60/0x90 [ 70.166104] __x64_sys_ioctl+0x16/0x20 [ 70.169859] do_syscall_64+0x5b/0x1b0 [ 70.173532] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 70.178587] RIP: 0033:0x7f90a1b3445b [ 70.182183] Code: 0f 1e fa 48 8b 05 2d aa 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd a9 2c 00 f7 d8 64 89 01 48 [ 70.200956] RSP: 002b:00007fffdca88b68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 70.208535] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f90a1b3445b [ 70.215684] RDX: 00007fffdca88b84 RSI: 0000000000002284 RDI: 0000000000000003 [ 70.222833] RBP: 00007fffdca88ca8 R08: 00007fffdca88b84 R09: 0000000000000000 [ 70.229981] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffdca88b84 [ 70.237131] R13: 0000000000000000 R14: 000055ab09b0bd28 R15: 0000000000000000 [ 70.244284] Modules linked in: nft_chain_route_ipv4 xt_CHECKSUM nft_chain_nat_ipv4 ipt_MASQUERADE nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c ipt_REJECT nf_reject_ipv4 nft_counter nft_compat tun bridge stp llc nf_tables nfnetli nk devlink sunrpc vfat fat intel_rapl intel_pmc_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm wmi_bmof iTCO_wdt iTCO_ vendor_support irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif intel_cstate intel_uncore intel_rapl_perf ipmi_si jo ydev pcspkr ipmi_devintf sg wmi ipmi_msghandler video acpi_power_meter acpi_pad mei_me i2c_i801 mei ip_tables ext4 mbcache jbd2 sr_mod cd rom sd_mod qla2xxx ast i2c_algo_bit drm_kms_helper nvme_fc syscopyarea sysfillrect uas sysimgblt fb_sys_fops nvme_fabrics ttm [ 70.314805] usb_storage nvme_core crc32c_intel scsi_transport_fc ahci drm libahci tg3 libata megaraid_sas pinctrl_cannonlake pinctrl_ intel [ 70.327335] CR2: 0000000000000040 Fixes: 9cf2bab630765 ("block: kill request ->cpu member") Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: qla2xxx: Fix FC-AL connection target discoveryQuinn Tran1-0/+7
Commit 7f147f9bfd44 ("scsi: qla2xxx: Fix N2N target discovery with Local loop") fixed N2N target discovery for local loop. However, same code is used for FC-AL discovery as well. Added check to make sure we are bypassing area and domain check only in N2N topology for target discovery. Fixes: 7f147f9bfd44 ("scsi: qla2xxx: Fix N2N target discovery with Local loop") Cc: stable@vger.kernel.org # 5.0+ Signed-off-by: Quinn Tran <qtran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: core: Avoid that a kernel warning appears during system resumeBart Van Assche1-2/+4
Since scsi_device_quiesce() skips SCSI devices that have another state than RUNNING, OFFLINE or TRANSPORT_OFFLINE, scsi_device_resume() should not complain about SCSI devices that have been skipped. Hence this patch. This patch avoids that the following warning appears during resume: WARNING: CPU: 3 PID: 1039 at blk_clear_pm_only+0x2a/0x30 CPU: 3 PID: 1039 Comm: kworker/u8:49 Not tainted 5.0.0+ #1 Hardware name: LENOVO 4180F42/4180F42, BIOS 83ET75WW (1.45 ) 05/10/2013 Workqueue: events_unbound async_run_entry_fn RIP: 0010:blk_clear_pm_only+0x2a/0x30 Call Trace: ? scsi_device_resume+0x28/0x50 ? scsi_dev_type_resume+0x2b/0x80 ? async_run_entry_fn+0x2c/0xd0 ? process_one_work+0x1f0/0x3f0 ? worker_thread+0x28/0x3c0 ? process_one_work+0x3f0/0x3f0 ? kthread+0x10c/0x130 ? __kthread_create_on_node+0x150/0x150 ? ret_from_fork+0x1f/0x30 Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Martin Steigerwald <martin@lichtvoll.de> Cc: <stable@vger.kernel.org> Reported-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Tested-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Fixes: 3a0a529971ec ("block, scsi: Make SCSI quiesce and resume work reliably") # v4.15 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: core: Also call destroy_rcu_head() for passthrough requestsBart Van Assche1-1/+8
cmd->rcu is initialized by scsi_initialize_rq(). For passthrough requests, blk_get_request() calls scsi_initialize_rq(). For filesystem requests, scsi_init_command() calls scsi_initialize_rq(). Make sure that destroy_rcu_head() is called for passthrough requests. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reported-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-18scsi: iscsi: flush running unbind operations when removing a sessionMaurizio Lombardi1-0/+2
In some cases, the iscsi_remove_session() function is called while an unbind_work operation is still running. This may cause a situation where sysfs objects are removed in an incorrect order, triggering a kernel warning. [ 605.249442] ------------[ cut here ]------------ [ 605.259180] sysfs group 'power' not found for kobject 'target2:0:0' [ 605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80 [ 605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi [ 605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1 [ 605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014 [ 605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi] [ 605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80 [ 605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55 [ 606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286 [ 606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818 [ 606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007 [ 606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838 [ 606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000 [ 606.824707] FS: 0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000 [ 607.018333] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0 [ 607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 607.524236] Call Trace: [ 607.530591] device_del+0x56/0x350 [ 607.624393] ? ata_tlink_match+0x30/0x30 [libata] [ 607.727805] ? attribute_container_device_trigger+0xb4/0xf0 [ 607.829911] scsi_target_reap_ref_release+0x39/0x50 [ 607.928572] scsi_remove_target+0x1a2/0x1d0 [ 608.017350] __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi] [ 608.117435] process_one_work+0x1a7/0x360 [ 608.132917] worker_thread+0x30/0x390 [ 608.222900] ? pwq_unbound_release_workfn+0xd0/0xd0 [ 608.323989] kthread+0x112/0x130 [ 608.418318] ? kthread_bind+0x30/0x30 [ 608.513821] ret_from_fork+0x35/0x40 [ 608.613909] ---[ end trace 0b98c310c8a6138c ]--- Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds20-67/+197
Pull more SCSI updates from James Bottomley: "This is the final round of mostly small fixes and performance improvements to our initial submit. The main regression fix is the ia64 simscsi build failure which was missed in the serial number elimination conversion" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: ia64: simscsi: use request tag instead of serial_number scsi: aacraid: Fix performance issue on logical drives scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup() scsi: libiscsi: Hold back_lock when calling iscsi_complete_task scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port scsi: hisi_sas: Set PHY linkrate when disconnected scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO scsi: hisi_sas: Change return variable type in phy_up_v3_hw() scsi: qla2xxx: check for kstrtol() failure scsi: lpfc: fix 32-bit format string warning scsi: lpfc: fix unused variable warning scsi: target: tcmu: Switch to bitmap_zalloc() scsi: libiscsi: fall back to sendmsg for slab pages scsi: qla2xxx: avoid printf format warning scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check scsi: ufs: hisi: fix ufs_hba_variant_ops passing scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_show ...
2019-03-14scsi: aacraid: Fix performance issue on logical drivesSagar Biradar1-5/+8
Fix performance issue where the queue depth for SmartIOC logical volumes is set to 1, and allow the usual logical volume code to be executed Fixes: a052865fe287 (aacraid: Set correct Queue Depth for HBA1000 RAW disks) Cc: stable@vger.kernel.org Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-14scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup()Dan Carpenter1-7/+9
It used to be that "error" was set to -ENODEV at the start of the function but we shifted some code around an now "error" is set to zero for most error paths. There is a mix of direct returns and "goto out" but I changed everything to direct returns for consistency. Fixes: 56de8357049c ("scsi: lpfc: fix calls to dma_set_mask_and_coherent()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: James Smart  <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds166-10288/+9712
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
2019-03-08Merge tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block layer updates from Jens Axboe: "Not a huge amount of changes in this round, the biggest one is that we finally have Mings multi-page bvec support merged. Apart from that, this pull request contains: - Small series that avoids quiescing the queue for sysfs changes that match what we currently have (Aleksei) - Series of bcache fixes (via Coly) - Series of lightnvm fixes (via Mathias) - NVMe pull request from Christoph. Nothing major, just SPDX/license cleanups, RR mp policy (Hannes), and little fixes (Bart, Chaitanya). - BFQ series (Paolo) - Save blk-mq cpu -> hw queue mapping, removing a pointer indirection for the fast path (Jianchao) - fops->iopoll() added for async IO polling, this is a feature that the upcoming io_uring interface will use (Christoph, me) - Partition scan loop fixes (Dongli) - mtip32xx conversion from managed resource API (Christoph) - cdrom registration race fix (Guenter) - MD pull from Song, two minor fixes. - Various documentation fixes (Marcos) - Multi-page bvec feature. This brings a lot of nice improvements with it, like more efficient splitting, larger IOs can be supported without growing the bvec table size, and so on. (Ming) - Various little fixes to core and drivers" * tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits) block: fix updating bio's front segment size block: Replace function name in string with __func__ nbd: propagate genlmsg_reply return code floppy: remove set but not used variable 'q' null_blk: fix checking for REQ_FUA block: fix NULL pointer dereference in register_disk fs: fix guard_bio_eod to check for real EOD errors blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map block: optimize bvec iteration in bvec_iter_advance block: introduce mp_bvec_for_each_page() for iterating over page block: optimize blk_bio_segment_split for single-page bvec block: optimize __blk_segment_map_sg() for single-page bvec block: introduce bvec_nth_page() iomap: wire up the iopoll method block: add bio_set_polled() helper block: wire up block device iopoll method fs: add an iopoll method to struct file_operations loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part() loop: do not print warn message if partition scan is successful block: bounce: make sure that bvec table is updated ...
2019-03-07scsi: libiscsi: Hold back_lock when calling iscsi_complete_taskLee Duncan1-2/+20
If there is an error queueing an iscsi command in iscsi_queuecommand(), for example if the transport fails to take the command in sessuin->tt->xmit_task(), then the error path can call iscsi_complete_task() without first aquiring the back_lock as required. This can lead to things like ITT pool can get corrupt, resulting in duplicate ITTs being sent out. The solution is to hold the back_lock around iscsi_complete_task() calls, and to add a little commenting to help others understand when back_lock must be held. Signed-off-by: Lee Duncan <lduncan@suse.com> Acked-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLinkXiang Chen1-0/+2
With default value of register SERDES_CFG, the link is not stable for some special disks when running IO. According to HW guys' suggestion, need to make the bit10~19 value of register SERDES_CFG the max value to increase the reliability of the HiLink. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Reviewed-by: Yupeng Zhou <zhouyupeng1@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP ↵Xiang Chen3-3/+49
target port If we exchange SAS expander from one SAS controller to other SAS controller without powering it down, the STP target port will maintain previous affiliation and reject all subsequent connection requests from other STP initiator ports with OPEN_REJECT (STP RESOURCES BUSY). To solve this issue, send HARD RESET to clear the previous affiliation of STP target port according to SPL (chapter 6.19.4). We (re-)introduce dev status flag to know if to sleep in NEXUS reset code or not for remote PHYs. The idea is that if the device is being initialised, we don't require the delay, and caller would wait for link to be established, cf. sas_ata_hard_reset(). Co-developed-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: hisi_sas: Set PHY linkrate when disconnectedJohn Garry1-0/+10
When the PHY comes down, we currently do not set the negotiated linkrate: root@(none)$ pwd /sys/class/sas_phy/phy-0:0 root@(none)$ more enable 1 root@(none)$ more negotiated_linkrate 12.0 Gbit root@(none)$ echo 0 > enable root@(none)$ more negotiated_linkrate 12.0 Gbit root@(none)$ This patch fixes the driver code to set it properly when the PHY comes down. If the PHY had been enabled, then set unknown; otherwise, flag as disabled. The logical place to set the negotiated linkrate for this scenario is PHY down routine, which is called from the PHY down ISR. However, it is not possible to know if the PHY comes down due to PHY disable or loss of link, as sas_phy.enabled member is not set until after the transport disable routine is complete, which races with the PHY down ISR. As an imperfect solution, use sas_phy_data.enable as the flag to know if the PHY is down due to disable. It's imperfect, as sas_phy_data is internal to libsas. I can't see another way without adding a new field to hisi_sas_phy and managing it, or changing SCSI SAS transport. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: hisi_sas: print PHY RX errors count for later revision of v3 hwXiaofei Tan2-25/+60
The later revision of v3 hw has added an function of interrupt coalesce according to time for PHY RX errors. We set the coalesce time to 1s. Then we print PHY RX errors count when PHY RX errors happen, and don't need to worry that there may be too much log prints. Besides, we use hisi_sas_phy.lock to protect error count value. Because we update them by calling phy_get_events_v3_hw(), which is also used by core driver (for get PHY events function). We relocate phy_get_events_v3_hw() to avoid a further declaration. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: hisi_sas: Fix a timeout race of driver internal and SMP IOXiang Chen1-1/+2
For internal IO and SMP IO, there is a time-out timer for them. In the timer handler, it checks whether IO is done according to the flag task->task_state_lock. There is an issue which may cause system suspended: internal IO or SMP IO is sent, but at that time because of hardware exception (such as inject 2Bit ECC error), so IO is not completed and also not timeout. But, at that time, the SAS controller reset occurs to recover system. It will release the resource and set the status of IO to be SAS_TASK_STATE_DONE, so when IO timeout, it will never complete the completion of IO and wait for ever. [ 729.123632] Call trace: [ 729.126791] [<ffff00000808655c>] __switch_to+0x94/0xa8 [ 729.133106] [<ffff000008d96e98>] __schedule+0x1e8/0x7fc [ 729.138975] [<ffff000008d974e0>] schedule+0x34/0x8c [ 729.144401] [<ffff000008d9b000>] schedule_timeout+0x1d8/0x3cc [ 729.150690] [<ffff000008d98218>] wait_for_common+0xdc/0x1a0 [ 729.157101] [<ffff000008d98304>] wait_for_completion+0x28/0x34 [ 729.165973] [<ffff000000dcefb4>] hisi_sas_internal_task_abort+0x2a0/0x424 [hisi_sas_test_main] [ 729.176447] [<ffff000000dd18f4>] hisi_sas_abort_task+0x244/0x2d8 [hisi_sas_test_main] [ 729.185258] [<ffff000008971714>] sas_eh_handle_sas_errors+0x1c8/0x7b8 [ 729.192391] [<ffff000008972774>] sas_scsi_recover_host+0x130/0x398 [ 729.199237] [<ffff00000894d8a8>] scsi_error_handler+0x148/0x5c0 [ 729.206009] [<ffff0000080f4118>] kthread+0x10c/0x138 [ 729.211563] [<ffff0000080855dc>] ret_from_fork+0x10/0x18 To solve the issue, callback function task_done of those IOs need to be called when on SAS controller reset. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: hisi_sas: Change return variable type in phy_up_v3_hw()Xiang Chen1-1/+2
According to the tool fortify, phy_up_v3_hw() returns signed value, while it should return an unsigned value. So change variable "res" from int to irq_return_t. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: qla2xxx: check for kstrtol() failureDan Carpenter1-0/+2
The error handling was unintentionally left out so it introduces a Smatch static checker warning: drivers/scsi/qla2xxx/qla_attr.c:1655 qla2x00_port_speed_store() error: uninitialized symbol 'type'. Fixes: a7b9ca7fc87a ("scsi: qla2xxx: Add support for setting port speed") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: lpfc: fix 32-bit format string warningArnd Bergmann1-1/+1
On 32-bit architectures, we see a warning when %ld is used to print a size_t: In file included from drivers/scsi/lpfc/lpfc_init.c:62: drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_new_io_buf': drivers/scsi/lpfc/lpfc_logmsg.h:62:45: error: format '%ld' expects argument of type 'long int', but argument 5 has type 'unsigned int' [-Werror=format=] This is harmless, but portable code should just use %zd to avoid the warning. Fixes: 0794d601d174 ("scsi: lpfc: Implement common IO buffers between NVME and SCSI") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: lpfc: fix unused variable warningArnd Bergmann1-1/+2
The newly introduced 'cpu' variable is only used inside of an optional block, so we get a warning without CONFIG_SCSI_LPFC_DEBUG_FS: drivers/scsi/lpfc/lpfc_nvme.c: In function 'lpfc_nvme_io_cmd_wqe_cmpl': drivers/scsi/lpfc/lpfc_nvme.c:968:30: error: unused variable 'cpu' [-Werror=unused-variable] uint32_t code, status, idx, cpu; Move the declaration into the same block to avoid the warning. Fixes: 63df6d637e33 ("scsi: lpfc: Adapt cpucheck debugfs logic to Hardware Queues") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: libiscsi: fall back to sendmsg for slab pagesVasily Averin1-3/+8
In "XFS over network block device" scenario XFS can create IO requests with slab-based XFS metadata. During processing such requests tcp_sendpage() can merge skb fragments with neighbour slab objects. If receiving side is located on the same host tcp_recvmsg() can trigger BUG_ON in hardening check and crash the host with following message: usercopy: kernel memory exposure attempt detected from XXXXXXXX (kmalloc-512) (1024 bytes) This patch redirect such requests from sednpage to sendmsg path. The problem is similar to one described in recent commit 7e241f647dc7 ("libceph: fall back to sendmsg for slab pages") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: qla2xxx: avoid printf format warningArnd Bergmann1-2/+2
Depending on the target architecture and configuration, both phys_addr_t and dma_addr_t may be smaller than 'long long', so we get a warning when printing either of them using the %llx format string: drivers/scsi/qla2xxx/qla_iocb.c: In function 'qla24xx_walk_and_build_prot_sglist': drivers/scsi/qla2xxx/qla_iocb.c:1140:46: error: format '%llx' expects argument of type 'long long unsigned int', but argument 6 has type 'dma_addr_t' {aka 'unsigned int'} [-Werror=format=] "%s: page boundary crossing (phys=%llx len=%x)\n", ~~~^ %x __func__, sle_phys, sg->length); ~~~~~~~~ drivers/scsi/qla2xxx/qla_iocb.c:1180:29: error: format '%llx' expects argument of type 'long long unsigned int', but argument 7 has type 'dma_addr_t' {aka 'unsigned int'} [-Werror=format=] "%s: sg[%x] (phys=%llx sglen=%x) ldma_sg_len: %x dif_bundl_len: %x ldma_needed: %x\n", ~~~^ There are special %pad and %pap format strings in Linux that we could use here, but since the driver already does 64-bit arithmetic on the values, using a plain 'u64' seems more consistent here. Note: A possible related issue may be that the driver possibly checks the wrong kind of overflow: when an IOMMU is in use, buffers that cross a 32-bit boundary in physical addresses would still be mapped into dma addresses within the low 4GB space, so I suspect that we actually want to check sg_dma_address() instead of sg_phys() here. Fixes: 50b812755e97 ("scsi: qla2xxx: Fix DMA error when the DIF sg buffer crosses 4GB boundary") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unsetJames Smart1-1/+2
The patch that replaced io channels for hdw_queues now reports the following static checker warning: drivers/scsi/lpfc/lpfc_init.c:11136 lpfc_sli4_hba_unset() error: we previously assumed 'phba->pport' could be null (see line 11074) Resolve by adding a pport NULL check. [mkp: tag tweak] Fixes: cdb42becdd40 ("scsi: lpfc: Replace io_channels for nvme and fcp with general hdw_queues per cpu"_ Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep checkJames Smart1-1/+1
The outer routine lpfc_sli_issue_iocb(), which decomposes into the SLI3 (s3) or SLI4 (s4) subroutines takes out the locks. For s3, it takes out the hbalock. For s4, it takes out the ring_lock. The lockdep check in the s3 and s4 subroutines both check hbalock, which is incorrect for s4. Revise the s4 subroutine to lockdep check the ring_lock. Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: ufs: hisi: fix ufs_hba_variant_ops passingArnd Bergmann4-10/+7
Without CONFIG_OF, the of_match_node() helper does not evaluate its argument, and the compiler warns about the unused variable: drivers/scsi/ufs/ufs-hisi.c: In function 'ufs_hisi_probe': drivers/scsi/ufs/ufs-hisi.c:673:17: error: unused variable 'dev' [-Werror=unused-variable] Rework this code to pass the data directly, and while we're at it, correctly handle the const pointers. Fixes: 653fcb07d95e ("scsi: ufs: Add HI3670 SoC UFS driver support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_showBill Kuzeja1-0/+2
When trying to display tgt_counters in the debugfs, a panic can result. There is no null check for qpair after it is assigned in the for-loop. Unless vha->hw->queue_pair_map array is completely filled with entries, the system will panic dereferencing a null pointer. Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06scsi: megaraid_sas: reduce module load timeSteve Sistare1-2/+2
megaraid_sas takes 1+ seconds to load while waiting for firmware: [2.822603] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state [3.871003] megaraid_sas 0000:03:00.0: FW now in Ready state This is due to the following loop in megasas_transition_to_ready(), which waits a minimum of 1 second, even though the FW becomes ready in tens of millisecs: /* * The cur_state should not last for more than max_wait secs */ for (i = 0; i < max_wait; i++) { ... msleep(1000); ... dev_info(&instance->pdev->dev, "FW now in Ready state\n"); This is a regression, caused by a change of the msleep granularity from 1 to 1000 due to concern about waiting too long on systems with coarse jiffies. To fix, increase iterations and use msleep(20), which results in: [2.670627] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state [2.739386] megaraid_sas 0000:03:00.0: FW now in Ready state Fixes: fb2f3e96d80f ("scsi: megaraid_sas: Fix msleep granularity") Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-06Merge tag 'char-misc-5.1-rc1' of ↵Linus Torvalds2-7/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ...
2019-03-06scsi: virtio_scsi: don't send sc payload with tmfsFelipe Franciosi1-2/+0
The virtio scsi spec defines struct virtio_scsi_ctrl_tmf as a set of device-readable records and a single device-writable response entry: struct virtio_scsi_ctrl_tmf { // Device-readable part le32 type; le32 subtype; u8 lun[8]; le64 id; // Device-writable part u8 response; } The above should be organised as two descriptor entries (or potentially more if using VIRTIO_F_ANY_LAYOUT), but without any extra data after "le64 id" or after "u8 response". The Linux driver doesn't respect that, with virtscsi_abort() and virtscsi_device_reset() setting cmd->sc before calling virtscsi_tmf(). It results in the original scsi command payload (or writable buffers) added to the tmf. This fixes the problem by leaving cmd->sc zeroed out, which makes virtscsi_kick_cmd() add the tmf to the control vq without any payload. Cc: stable@vger.kernel.org Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>