summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2014-08-29Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+0
Pull block layer fixes from Jens Axboe: "A smaller collection of fixes that have come up since the initial merge window pull request. This contains: - error handling cleanup and support for larger than 16 byte cdbs in sg_io() from Christoph. The latter just matches what bsg and friends support, sg_io() got left out in the merge. - an option for brd to expose partitions in /proc/partitions. They are hidden by default for compat reasons. From Dmitry Monakhov. - a few blk-mq fixes from me - killing a dead/unused flag, fix for merging happening even if turned off, and correction of a few comments. - removal of unnecessary ->owner setting in systemace. From Michal Simek. - two related fixes for a problem with nesting freezing of queues in blk-mq. One from Ming Lei removing an unecessary freeze operation, and another from Tejun fixing the nesting regression introduced in the merge window. - fix for a BUG_ON() at bio_endio time when protection info is attached and the IO has an error. From Sagi Grimberg. - two scsi_ioctl bug fixes for regressions with scsi-mq from Tony Battersby. - a cfq weight update fix and subsequent comment update from Toshiaki Makita" * 'for-linus' of git://git.kernel.dk/linux-block: cfq-iosched: Add comments on update timing of weight cfq-iosched: Fix wrong children_weight calculation block: fix error handling in sg_io fix regression in SCSI_IOCTL_SEND_COMMAND scsi-mq: fix requests that use a separate CDB buffer block: support > 16 byte CDBs for SG_IO block: cleanup error handling in sg_io brd: add ram disk visibility option block: systemace: Remove .owner field for driver blk-mq: blk_mq_freeze_queue() should allow nesting blk-mq: correct a few wrong/bad comments block: Fix BUG_ON when pi errors occur blk-mq: don't allow merges if turned off for the queue blk-mq: get rid of unused BLK_MQ_F_SHOULD_SORT flag blk-mq: fix WARNING "percpu_ref_kill() called more than once!"
2014-08-22scsi-mq: fix requests that use a separate CDB bufferTony Battersby1-1/+0
This patch fixes code such as the following with scsi-mq enabled: rq = blk_get_request(...); blk_rq_set_block_pc(rq); rq->cmd = my_cmd_buffer; /* separate CDB buffer */ blk_execute_rq_nowait(...); Code like this appears in e.g. sg_start_req() in drivers/scsi/sg.c (for large CDBs only). Without this patch, scsi_mq_prep_fn() will set rq->cmd back to rq->__cmd, causing the wrong CDB to be sent to the device. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-20Merge tag 'scsi-fixes' of ↵Linus Torvalds1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "These are the two bug fixes I mentioned in the final merge window pull. One is a reversed logic check in the device busy tests which can cause a nasty hang and another crash seen in the new SCSI pool support if the use count ever goes to zero" [ The device busy test already got merged from a patch earlier, so is now duplicated. ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] save command pool address of Scsi_Host [SCSI] fix qemu boot hang problem
2014-08-19scsi: Fix qemu boot hang problemGuenter Roeck1-1/+1
The latest kernel fails to boot qemu arm images when using scsi for disk access. Boot gets stuck after the following messages. brd: module loaded sym53c8xx 0000:00:0c.0: enabling device (0100 -> 0103) sym0: <895a> rev 0x0 at pci 0000:00:0c.0 irq 93 sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. scsi host0: sym-2.2.3 Bisect points to commit 71e75c97f97a ("scsi: convert device_busy to atomic_t"). Code inspection shows the following suspicious change in scsi_request_fn. out_delay: - if (sdev->device_busy == 0 && !scsi_device_blocked(sdev)) + if (atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev)) blk_delay_queue(q, SCSI_QUEUE_DELAY); } 'sdev->device_busy == 0' was replaced with 'atomic_read(&sdev->device_busy)', meaning the logic was reversed. Changing this expression to '!atomic_read(&sdev->device_busy)' fixes the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Jens Axboe <axboe@fb.com> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com> Reviewed-by: Webb Scales <webbnh@hp.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds10-114/+123
Pull more SCSI changes from James Bottomley: "This is a small set of updates which missed the first pull. It's more msix updates, some iscsi and qla4xxx fixes, we also have some string null termination fixes a return value fix and a couple of pm8001 firmware fixes. Just a note, we do have a couple of bug fixes coming under separate cover, but they don't have to be part of the merge window" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: iscsi class: Fix freeing of skb in get host error path scsi: fix u14-34f printk format warnings pm8001: fix pm8001_store_update_fw pm8001: Fix erratic calculation in update_flash pm8001: Update MAINTAINERS list libiscsi: return new error code when nop times out iscsi class: fix get_host_stats return code when not supported iscsi class: fix get_host_stats error handling qla4xxx: fix get_host_stats error propagation qla4xxx: check the return value of dma_alloc_coherent() scsi: qla4xxx: ql4_mbx.c: Cleaning up missing null-terminate in conjunction with strncpy scsi: qla4xxx: ql4_os.c: Cleaning up missing null-terminate in conjunction with strncpy qla4xxx: Use pci_enable_msix_exact() instead of pci_enable_msix() pm8001: Use pci_enable_msix_exact() instead of pci_enable_msix()
2014-08-15[SCSI] save command pool address of Scsi_HostJuergen Gross1-2/+10
If a scsi host driver specifies .cmd_len in it's scsi_host_template, a driver's private command pool is needed. scsi_find_host_cmd_pool() will locate it, but scsi_alloc_host_cmd_pool() isn't saving the pool address in the host template. This will result in an access error when the host is removed. Avoid the problem by saving the address of a new allocated command pool where it is expected. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Fixes: 89d9a567952baec13e26ada3e438f1b642d66b6e Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-08-15[SCSI] fix qemu boot hang problemGuenter Roeck1-1/+1
The latest kernel fails to boot qemu arm images when using scsi for disk access. Boot gets stuck after the following messages. brd: module loaded sym53c8xx 0000:00:0c.0: enabling device (0100 -> 0103) sym0: <895a> rev 0x0 at pci 0000:00:0c.0 irq 93 sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. scsi host0: sym-2.2.3 Bisect points to commit 71e75c97f97a ("scsi: convert device_busy to atomic_t"). Code inspection shows the following suspicious change in scsi_request_fn. out_delay: - if (sdev->device_busy == 0 && !scsi_device_blocked(sdev)) + if (atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev)) blk_delay_queue(q, SCSI_QUEUE_DELAY); } 'sdev->device_busy == 0' was replaced with 'atomic_read(&sdev->device_busy)', meaning the logic was reversed. Changing this expression to '!atomic_read(&sdev->device_busy)' fixes the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Jens Axboe <axboe@fb.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Fixes: 71e75c97f97a Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-08-14Merge tag 'pci-v3.17-changes-2' of ↵Linus Torvalds7-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas: "Part two of the PCI changes for v3.17: - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine) It's a mechanical change that removes uses of the DEFINE_PCI_DEVICE_TABLE macro. I waited until later in the merge window to reduce conflicts, but it's possible you'll still see a few" * tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
2014-08-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-2/+2
Pull networking fixes from David Miller: "I'm sending this out, in particular, to get the iwlwifi fix propagated: 1) Fix build due to missing include in i40e driver, from Lucas Tanure. 2) Memory leak in openvswitch port allocation, from Chirstoph Jaeger. 3) Check DMA mapping errors in myri10ge, from Stanislaw Gruszka. 4) Fix various deadlock scenerios in sunvnet driver, from Sowmini Varadhan. 5) Fix cxgb4i build failures with incompatible Kconfig settings of the driver vs ipv6, from Anish Bhatt. 6) Fix generation of ACK packet timestamps in the presence of TSO which will be split up, from Willem de Bruijn. 7) Don't enable sched scan in iwlwifi driver, it causes firmware crashes in some revisions. From Emmanuel Grumbach. 8) Revert a macvlan simplification that causes crashes. 9) Handle RTT calculations properly in the presence of repair'd SKBs, from Andrey Vagin. 10) SIT tunnel lookup uses wrong device index in compares, from Shmulik Ladkani. 11) Handle MTU reductions in TCP properly for ipv4 mapped ipv6 sockets, from Neal Cardwell. 12) Add missing annotations in rhashtable code, from Thomas Graf. 13) Fix false interpretation of two RTOs as being from the same TCP loss event in the FRTO code, from Neal Cardwell" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits) netlink: Annotate RCU locking for seq_file walker rhashtable: fix annotations for rht_for_each_entry_rcu() rhashtable: unexport and make rht_obj() static rhashtable: RCU annotations for next pointers tcp: fix ssthresh and undo for consecutive short FRTO episodes tcp: don't allow syn packets without timestamps to pass tcp_tw_recycle logic tcp: fix tcp_release_cb() to dispatch via address family for mtu_reduced() sit: Fix ipip6_tunnel_lookup device matching criteria net: ethernet: ibm: ehea: Remove duplicate object from Makefile net: xgene: Check negative return value of xgene_enet_get_ring_size() tcp: don't use timestamp from repaired skb-s to calculate RTT (v2) net: xilinx: Remove .owner field for driver Revert "macvlan: simplify the structure port" iwlwifi: mvm: disable scheduled scan to prevent firmware crash xen-netback: remove loop waiting function xen-netback: don't stop dealloc kthread too early xen-netback: move NAPI add/remove calls xen-netback: fix debugfs entry creation xen-netback: fix debugfs write length check net-timestamp: fix missing tcp fragmentation cases ...
2014-08-14Merge tag 'rdma-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma updates from Roland Dreier: "Main set of InfiniBand/RDMA updates for 3.17 merge window: - MR reregistration support - MAD support for RMPP in userspace - iSER and SRP initiator updates - ocrdma hardware driver updates - other fixes..." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (52 commits) IB/srp: Fix return value check in srp_init_module() RDMA/ocrdma: report asic-id in query device RDMA/ocrdma: Update sli data structure for endianness RDMA/ocrdma: Obtain SL from device structure RDMA/uapi: Include socket.h in rdma_user_cm.h IB/srpt: Handle GID change events IB/mlx5: Use ARRAY_SIZE instead of sizeof/sizeof[0] IB/mlx4: Use ARRAY_SIZE instead of sizeof/sizeof[0] RDMA/amso1100: Check for integer overflow in c2_alloc_cq_buf() IPoIB: Remove unnecessary test for NULL before debugfs_remove() IB/mad: Add user space RMPP support IB/mad: add new ioctl to ABI to support new registration options IB/mad: Add dev_notice messages for various umad/mad registration failures IB/mad: Update module to [pr|dev]_* style print messages IB/ipoib: Avoid multicast join attempts with invalid P_key IB/umad: Update module to [pr|dev]_* style print messages IB/ipoib: Avoid flushing the workqueue from worker context IB/ipoib: Use P_Key change event instead of P_Key polling mechanism IB/ipath: Add P_Key change event support mlx4_core: Add support for secure-host and SMP firewall ...
2014-08-13libcxgbi/cxgb4i : Fix ipv6 build failure caught with randconfigAnish Bhatt2-2/+2
Previous guard of IS_ENABLED(CONFIG_IPV6) is not sufficient when cxgbi drivers are built into kernel but ipv6 is not. v2: Use Kconfig to disable compiling cxgbi built into kernel when ipv6 is compiled as a module Fixes: e81fbf6cd652 ("libcxgbi:cxgb4i Guard ipv6 code with a config check") Fixes: fc8d0590d914 ("libcxgbi: Add ipv6 api to driver") Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine7-7/+7
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-08scsi: use pci_zalloc_consistentJoe Perches12-59/+32
Remove the now unnecessary memset too. Signed-off-by: Joe Perches <joe@perches.com> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: Michael Neuffer <mike@i-Connect.Net> Cc: "Stephen M. Cameron" <scameron@beardog.cce.hp.com> Cc: Neela Syam Kolli <megaraidlinux@lsi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08drivers/scsi: replace strict_strto callsDaniel Walter2-4/+4
Replace obsolete strict_strto with more appropriate kstrto calls Signed-off-by: Daniel Walter <dwalter@google.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06Merge branch 'for-linus' of ↵Linus Torvalds1-10/+14
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree changes from Jiri Kosina: "Summer edition of trivial tree updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: fix two typos in watchdog-api.txt irq-gic: remove file name from heading comment MAINTAINERS: Add miscdevice.h to file list for char/misc drivers. scsi: mvsas: mv_sas.c: Fix for possible null pointer dereference doc: replace "practise" with "practice" in Documentation befs: remove check for CONFIG_BEFS_RW scsi: doc: fix 'SCSI_NCR_SETUP_MASTER_PARITY' drivers/usb/phy/phy.c: remove a leading space mfd: fix comment cpuidle: fix comment doc: hpfall.c: fix missing null-terminate after strncpy call usb: doc: hotplug.txt code typos kbuild: fix comment in Makefile.modinst SH: add proper prompt to SH_MAGIC_PANEL_R2_VERSION ARM: msm: Remove MSM_SCM crypto: Remove MPILIB_EXTRA doc: CN: remove dead link, kerneltrap.org no longer works media: update reference, kerneltrap.org no longer works hexagon: update reference, kerneltrap.org no longer works doc: LSM: update reference, kerneltrap.org no longer works ...
2014-08-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds152-5730/+4696
Pull SCSI updates from James Bottomley: "This patch set consists of the usual driver updates (ufs, storvsc, pm8001 hpsa). It also has removal of the user space target driver code (everyone is using LIO now), a partial PCI MSI-X update, more multi-queue updates, conversion to 64 bit LUNs (so we could theoretically cope with any LUN returned by a device) and placeholder support for the ZBC device type (Shingle drives), plus an assortment of minor updates and bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (143 commits) scsi: do not issue SCSI RSOC command to Promise Vtrak E610f vmw_pvscsi: Use pci_enable_msix_exact() instead of pci_enable_msix() pm8001: Fix invalid return when request_irq() failed lpfc: Remove superfluous call to pci_disable_msix() isci: Use pci_enable_msix_exact() instead of pci_enable_msix() bfa: Use pci_enable_msix_exact() instead of pci_enable_msix() bfa: Cleanup bfad_setup_intr() function bfa: Do not call pci_enable_msix() after it failed once fnic: Use pci_enable_msix_exact() instead of pci_enable_msix() scsi: use short driver name for per-driver cmd slab caches scsi_debug: support scsi-mq, queues and locks Drivers: add blist flags scsi: ufs: fix endianness sparse warnings scsi: ufs: make undeclared functions static bnx2i: Update driver version to 2.7.10.1 pm8001: fix a memory leak in nvmd_resp pm8001: fix update_flash pm8001: fix a memory leak in flash_update pm8001: Cleaning up uninitialized variables pm8001: Fix to remove null pointer checks that could never happen ...
2014-08-06Merge remote-tracking branch 'scsi-queue/drivers-for-3.17' into for-nextJames Bottomley9-112/+121
2014-08-06Merge remote-tracking branch 'scsi-queue/core-for-3.17' into for-nextJames Bottomley1-2/+2
2014-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-62/+563
Pull networking updates from David Miller: "Highlights: 1) Steady transitioning of the BPF instructure to a generic spot so all kernel subsystems can make use of it, from Alexei Starovoitov. 2) SFC driver supports busy polling, from Alexandre Rames. 3) Take advantage of hash table in UDP multicast delivery, from David Held. 4) Lighten locking, in particular by getting rid of the LRU lists, in inet frag handling. From Florian Westphal. 5) Add support for various RFC6458 control messages in SCTP, from Geir Ola Vaagland. 6) Allow to filter bridge forwarding database dumps by device, from Jamal Hadi Salim. 7) virtio-net also now supports busy polling, from Jason Wang. 8) Some low level optimization tweaks in pktgen from Jesper Dangaard Brouer. 9) Add support for ipv6 address generation modes, so that userland can have some input into the process. From Jiri Pirko. 10) Consolidate common TCP connection request code in ipv4 and ipv6, from Octavian Purdila. 11) New ARP packet logger in netfilter, from Pablo Neira Ayuso. 12) Generic resizable RCU hash table, with intial users in netlink and nftables. From Thomas Graf. 13) Maintain a name assignment type so that userspace can see where a network device name came from (enumerated by kernel, assigned explicitly by userspace, etc.) From Tom Gundersen. 14) Automatic flow label generation on transmit in ipv6, from Tom Herbert. 15) New packet timestamping facilities from Willem de Bruijn, meant to assist in measuring latencies going into/out-of the packet scheduler, latency from TCP data transmission to ACK, etc" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits) cxgb4 : Disable recursive mailbox commands when enabling vi net: reduce USB network driver config options. tg3: Modify tg3_tso_bug() to handle multiple TX rings amd-xgbe: Perform phy connect/disconnect at dev open/stop amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask net: sun4i-emac: fix memory leak on bad packet sctp: fix possible seqlock seadlock in sctp_packet_transmit() Revert "net: phy: Set the driver when registering an MDIO bus device" cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine team: Simplify return path of team_newlink bridge: Update outdated comment on promiscuous mode net-timestamp: ACK timestamp for bytestreams net-timestamp: TCP timestamping net-timestamp: SCHED timestamp on entering packet scheduler net-timestamp: add key to disambiguate concurrent datagrams net-timestamp: move timestamp flags out of sk_flags net-timestamp: extend SCM_TIMESTAMPING ancillary data struct cxgb4i : Move stray CPL definitions to cxgb4 driver tcp: reduce spurious retransmits due to transient SACK reneging qlcnic: Initialize dcbnl_ops before register_netdev ...
2014-08-05cxgb4i : Move stray CPL definitions to cxgb4 driverAnish Bhatt1-2/+0
These belong to the t4 msg header, will ensure there is no accidental code duplication in the future Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04Merge tag 'trace-3.17' of ↵Linus Torvalds1-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This pull request has a lot of work done. The main thing is the changes to the ftrace function callback infrastructure. It's introducing a way to allow different functions to call directly different trampolines instead of all calling the same "mcount" one. The only user of this for now is the function graph tracer, which always had a different trampoline, but the function tracer trampoline was called and did basically nothing, and then the function graph tracer trampoline was called. The difference now, is that the function graph tracer trampoline can be called directly if a function is only being traced by the function graph trampoline. If function tracing is also happening on the same function, the old way is still done. The accounting for this takes up more memory when function graph tracing is activated, as it needs to keep track of which functions it uses. I have a new way that wont take as much memory, but it's not ready yet for this merge window, and will have to wait for the next one. Another big change was the removal of the ftrace_start/stop() calls that were used by the suspend/resume code that stopped function tracing when entering into suspend and resume paths. The stop of ftrace was done because there was some function that would crash the system if one called smp_processor_id()! The stop/start was a big hammer to solve the issue at the time, which was when ftrace was first introduced into Linux. Now ftrace has better infrastructure to debug such issues, and I found the problem function and labeled it with "notrace" and function tracing can now safely be activated all the way down into the guts of suspend and resume Other changes include clean ups of uprobe code, clean up of the trace_seq() code, and other various small fixes and clean ups to ftrace and tracing" * tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits) ftrace: Add warning if tramp hash does not match nr_trampolines ftrace: Fix trampoline hash update check on rec->flags ring-buffer: Use rb_page_size() instead of open coded head_page size ftrace: Rename ftrace_ops field from trampolines to nr_trampolines tracing: Convert local function_graph functions to static ftrace: Do not copy old hash when resetting tracing: let user specify tracing_thresh after selecting function_graph ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on() tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST s390/ftrace: remove check of obsolete variable function_trace_stop arm64, ftrace: Remove check of obsolete variable function_trace_stop Blackfin: ftrace: Remove check of obsolete variable function_trace_stop metag: ftrace: Remove check of obsolete variable function_trace_stop microblaze: ftrace: Remove check of obsolete variable function_trace_stop MIPS: ftrace: Remove check of obsolete variable function_trace_stop parisc: ftrace: Remove check of obsolete variable function_trace_stop sh: ftrace: Remove check of obsolete variable function_trace_stop sparc64,ftrace: Remove check of obsolete variable function_trace_stop tile: ftrace: Remove check of obsolete variable function_trace_stop ftrace: x86: Remove check of obsolete variable function_trace_stop ...
2014-08-04iscsi class: Fix freeing of skb in get host error pathMike Christie1-1/+1
If get_host_stats failes we are using kfree to free the skb. We should be using kfree_skb. This patch was made over Christoph's scsi-queue drivers-for-3.17 branch. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-02cxgb4i : remove spurious use of rcuAnish Bhatt1-9/+5
As pointed out by the intel guys, there is no need to hold rcu read lock in cxgbi_inet6addr_handler(), this patch removes it. Fixes: 759a0cc5a3e1 ("cxgb4i: Add ipv6 code to driver, call into libcxgbi ipv6 api") Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-01scsi_transport_srp: Fix fast_io_fail_tmo=dev_loss_tmo=off behaviorBart Van Assche1-1/+2
If scsi_remove_host() is called while an rport is in the blocked state then scsi_remove_host() will only finish if the rport is unblocked from inside a timer function. Make sure that an rport only enters the blocked state if a timer will be started that will unblock it. This avoids that unloading the ib_srp kernel module after having disconnected the initiator from the target system results in a deadlock if both the fast_io_fail_tmo and dev_loss_tmo parameters have been set to "off". Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: David Dillow <dave@thedillows.org> Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-01scsi: fix u14-34f printk format warningsRandy Dunlap1-2/+2
Fix printk format warnings (seen on i386 builds): ../drivers/scsi/u14-34f.c: In function 'port_detect': ../drivers/scsi/u14-34f.c:630:28: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'u64' [-Wformat=] ../drivers/scsi/u14-34f.c: In function 'u14_34f_queuecommand_lck': ../drivers/scsi/u14-34f.c:1290:25: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 6 has type 'int' [-Wformat=] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-01pm8001: fix pm8001_store_update_fwTomas Henzl2-71/+70
The current implementation may mix the negative value returned from pm8001_set_nvmd with count. -(-ENOMEM) could be interpreted as bytes programmed, this patch fixes it. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-01pm8001: Fix erratic calculation in update_flashTomas Henzl1-5/+2
The loopcount is calculated by using some weird magic. Use instead a boring macro. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-01libiscsi: return new error code when nop times outMike Christie1-1/+1
When a iscsi nop as ping timedout we were failing with the common connection error code, ISCSI_ERR_CONN_FAILED. This patch adds a new error code for this problem so can properly track/distinguish in userspace. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-01iscsi class: fix get_host_stats return code when not supportedMike Christie1-1/+1
When the get_host_stats call was not supported we were returing EINVAL. This has us return ENOSYS, because for software iscsi drivers where there is no host it is ok to not have this callout. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-01iscsi class: fix get_host_stats error handlingMike Christie1-0/+4
iscsi_get_host_stats was dropping the error code returned by drivers like qla4xxx. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-01qla4xxx: fix get_host_stats error propagationMike Christie1-0/+2
qla4xxx was not always returning -EXYZ error codes when qla4xxx_get_host_stats failed. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-30qla4xxx: check the return value of dma_alloc_coherent()Maurizio Lombardi1-0/+6
the qla4xxx_alloc_fw_dump() calls dma_alloc_coherent() but does not check its return value. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-By: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-30scsi: qla4xxx: ql4_mbx.c: Cleaning up missing null-terminate in conjunction ↵Rickard Strandqvist1-7/+7
with strncpy Replacing strncpy with strlcpy to avoid strings that lacks null terminate. And in some cases modified to copy one character less than the overall length, as the entire area is already zeroed. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-By: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-30scsi: qla4xxx: ql4_os.c: Cleaning up missing null-terminate in conjunction ↵Rickard Strandqvist1-7/+7
with strncpy Replacing strncpy with strlcpy to avoid strings that lacks null terminate. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-By: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-30qla4xxx: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev1-1/+1
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-By: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-30pm8001: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev1-19/+20
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Reviewed-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-30Merge remote-tracking branch 'scsi-queue/drivers-for-3.17' into for-nextJames Bottomley6-46/+38
2014-07-30Merge remote-tracking branch 'scsi-queue/core-for-3.17' into for-nextJames Bottomley3-2/+9
2014-07-29scsi: do not issue SCSI RSOC command to Promise Vtrak E610fJanusz Dziemidowicz2-0/+7
Some devices don't like REPORT SUPPORTED OPERATION CODES and will simply timeout causing sd_mod init to take a very very long time. Introduce BLIST_NO_RSOC scsi scan flag, that stops RSOC from being issued. Add it to Promise Vtrak E610f entry in scsi scan blacklist. Fixes bug #79901 reported at https://bugzilla.kernel.org/show_bug.cgi?id=79901 Fixes: 98dcc2946adb ("SCSI: sd: Update WRITE SAME heuristics") Signed-off-by: Janusz Dziemidowicz <rraptorr@nails.eu.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29vmw_pvscsi: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev1-1/+1
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Arvind Kumar <arvindkumar@vmware.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29pm8001: Fix invalid return when request_irq() failedAlexander Gordeev1-2/+3
When a call to request_irq() failed pm8001_setup_msix() still returns the success. This udate fixes the described misbehaviour. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29lpfc: Remove superfluous call to pci_disable_msix()Alexander Gordeev1-3/+6
There is no need to call pci_disable_msix() in case the previous call to pci_enable_msix() failed Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29isci: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev1-1/+1
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29bfa: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev1-14/+6
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29bfa: Cleanup bfad_setup_intr() functionAlexander Gordeev1-10/+8
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29bfa: Do not call pci_enable_msix() after it failed onceAlexander Gordeev1-25/+23
Function pci_enable_msix() should not be called in case it threw a negative errno from a previous call. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29fnic: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev1-2/+2
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: "Suma Ramars (sramars)" <sramars@cisco.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29scsi: use short driver name for per-driver cmd slab cachesJames Bottomley1-2/+2
hostt->name might contain space, so use the ->proc_name short name instead when creating per-driver command slabs. Signed-off-by: James Bottomley <JBottomley@Parallels.com> Reported-by: poma <pomidorabelisima@gmail.com> Tested-by: poma <pomidorabelisima@gmail.com> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26scsi_debug: support scsi-mq, queues and locksDouglas Gilbert1-417/+1047
- add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25Drivers: add blist flagsK. Y. Srinivasan1-0/+10
Add blist flags to permit the reading of the VPD pages even when the target may claim SPC-2 compliance. MSFT targets currently claim SPC-2 compliance while they implement post SPC-2 features. With this patch we can correctly handle WRITE_SAME_16 issues. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>