summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2011-10-31scsi: Fix up files implicitly depending on module.h inclusionPaul Gortmaker25-0/+25
The module.h header was implicitly present everywhere, so files with no explicit include of the module infrastructure would build anyway. We are now removing the implicit include, and so we need to call out the module.h file that we need explicitly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31scsi: Add export.h for EXPORT_SYMBOL/THIS_MODULE as requiredPaul Gortmaker16-0/+17
For the basic SCSI infrastructure files that are exporting symbols but not modules themselves, add in the basic export.h header file to allow the exports. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds127-3040/+12772
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits) [SCSI] qla4xxx: export address/port of connection (fix udev disk names) [SCSI] ipr: Fix BUG on adapter dump timeout [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer [SCSI] hpsa: change confusing message to be more clear [SCSI] iscsi class: fix vlan configuration [SCSI] qla4xxx: fix data alignment and use nl helpers [SCSI] iscsi class: fix link local mispelling [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA [SCSI] aacraid: use lower snprintf() limit [SCSI] lpfc 8.3.27: Change driver version to 8.3.27 [SCSI] lpfc 8.3.27: T10 additions for SLI4 [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes [SCSI] megaraid_sas: Changelog and version update [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts ...
2011-10-26Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osdLinus Torvalds1-4/+0
* 'for-linus' of git://git.open-osd.org/linux-open-osd: (21 commits) ore: Enable RAID5 mounts exofs: Support for RAID5 read-4-write interface. ore: RAID5 Write ore: RAID5 read fs/Makefile: Always inspect exofs/ ore: Make ore_calc_stripe_info EXPORT_SYMBOL ore/exofs: Change ore_check_io API ore/exofs: Define new ore_verify_layout ore: Support for partial component table ore: Support for short read/writes exofs: Support for short read/writes ore: Remove check for ios->kern_buff in _prepare_for_striping to later ore: cleanup: Embed an ore_striping_info inside ore_io_state ore: Only IO one group at a time (API change) ore/exofs: Change the type of the devices array (API change) ore: Make ore_striping_info and ore_calc_stripe_info public exofs: Remove unused data_map member from exofs_sb_info exofs: Rename struct ore_components comps => oc exofs/super.c: local functions should be static exofs/ore.c: local functions should be static ...
2011-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds13-27/+38
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits) dp83640: free packet queues on remove dp83640: use proper function to free transmit time stamping packets ipv6: Do not use routes from locally generated RAs |PATCH net-next] tg3: add tx_dropped counter be2net: don't create multiple RX/TX rings in multi channel mode be2net: don't create multiple TXQs in BE2 be2net: refactor VF setup/teardown code into be_vf_setup/clear() be2net: add vlan/rx-mode/flow-control config to be_setup() net_sched: cls_flow: use skb_header_pointer() ipv4: avoid useless call of the function check_peer_pmtu TCP: remove TCP_DEBUG net: Fix driver name for mdio-gpio.c ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces ipv4: fix ipsec forward performance regression jme: fix irq storm after suspend/resume route: fix ICMP redirect validation net: hold sock reference while processing tx timestamps tcp: md5: add more const attributes Add ethtool -g support to virtio_net ... Fix up conflicts in: - drivers/net/Kconfig: The split-up generated a trivial conflict with removal of a stale reference to Documentation/networking/net-modules.txt. Remove it from the new location instead. - fs/sysfs/dir.c: Fairly nasty conflicts with the sysfs rb-tree usage, conflicting with Eric Biederman's changes for tagged directories.
2011-10-25Merge branch 'for-linus' of ↵Linus Torvalds18-27/+15
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits) MAINTAINERS: linux-m32r is moderated for non-subscribers linux@lists.openrisc.net is moderated for non-subscribers Drop default from "DM365 codec select" choice parisc: Kconfig: cleanup Kernel page size default Kconfig: remove redundant CONFIG_ prefix on two symbols cris: remove arch/cris/arch-v32/lib/nand_init.S microblaze: add missing CONFIG_ prefixes h8300: drop puzzling Kconfig dependencies MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers tty: drop superfluous dependency in Kconfig ARM: mxc: fix Kconfig typo 'i.MX51' Fix file references in Kconfig files aic7xxx: fix Kconfig references to READMEs Fix file references in drivers/ide/ thinkpad_acpi: Fix printk typo 'bluestooth' bcmring: drop commented out line in Kconfig btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888' doc: raw1394: Trivial typo fix CIFS: Don't free volume_info->UNC until we are entirely done with it. treewide: Correct spelling of successfully in comments ...
2011-10-21cxgbi: convert to SKB paged frag API.Ian Campbell2-14/+16
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: James Bottomley <James.Bottomley@suse.de> Cc: Karen Xie <kxie@chelsio.com> Cc: linux-scsi@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-20[SCSI] qla4xxx: export address/port of connection (fix udev disk names)Mike Christie1-0/+2
Udev uses the connection's persistent address/port in the /dev/disk/by-path name. qla4xxx is not exporting this value so its iscsi disk names have been lacking the iscsi info. In the old driver we did not have this information but we do now and can fix this by just setting the flags to tell libiscsi/scsi_transport_iscsi to export this info in sysfs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-20[SCSI] ipr: Fix BUG on adapter dump timeoutBrian King2-1/+4
If an adapter dump times out, the ipr driver will abort the dump and proceed to reset and recover the adapter. When an adapter dump completes, the work thread which is reading the adapter dump will initiate an adapter reset to recover the adapter. However, when the adapter dump gets aborted, the work thread should not initiate an adapter reset, since an adapter reset is already in progress. This fixes a case of calling pci_block_user_cfg_access overlapped, which results in a BUG. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-20[SCSI] megaraid_sas: Fix instance access in megasas_reset_timeradam radford1-2/+1
The following patch for megaraid_sas will fix a potential bad pointer access in megasas_reset_timer(), when a MegaRAID 9265/9285 or 9360/9380 gets a timeout. megasas_build_io_fusion() sets SCp.ptr to be a struct megasas_cmd_fusion *, but then megasas_reset_timer() was casting SCp.ptr to be a struct megasas_cmd *, then trying to access cmd->instance, which is invalid. Just loading instance from scmd->device->host->hostdata in megasas_reset_timer() fixes the issue. Signed-off-by: Adam Radford <aradford@gmail.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-20[SCSI] hpsa: change confusing message to be more clearMike Miller1-4/+2
The following warning message may be confusing to some users: dev_warn(&pdev->dev, "Controller claims that " "'Bit 2 doorbell reset' is " "supported, but not 'bit 5 doorbell reset'. " "Firmware update is recommended.\n"); Most users don't know or care what bit we may be hitting. Also change "recommended" to "required." Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-20[SCSI] iscsi class: fix vlan configurationMike Christie2-5/+5
Userspace was sending the priority/id part of the vlan tag and sysfs was displaying the id in the vlan file. This renames the vlan sysfs file to vlan_id to reflect that it was showing the id and to match the vlan_priority file. This also adds a ISCSI_NET_PARAM_VLAN_TAG iscsi nl command to relfect that we are sending down the vlan/priority part of the tag. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-20[SCSI] qla4xxx: fix data alignment and use nl helpersMike Christie2-18/+11
This has the driver use helpers for a common operation and fixes a issue where if multiple iscsi params are sent they could be sent at offsets that cause unaligned accesses. The nla helpers account for the padding needed to align properly for the driver. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-20[SCSI] iscsi class: fix link local mispellingMike Christie1-3/+3
Use the same format for link local variables. Instead of linklocal do link_local. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-20[SCSI] iscsi class: Replace iscsi_get_next_target_id with IDAMike Christie1-36/+23
Replaced the iscsi_get_next_target_id with IDA to make target-id allocation efficient for iscsi offload drivers This patch should be applied after Jonathen Cameron Patch "ida : simplified functions for id allocation" Signed-off-by: John Soni Jose <jose0here@gmail.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-20[SCSI] aacraid: use lower snprintf() limitDan Carpenter1-3/+4
This is just a cleanup, to silence static checker warnings. It doesn't change how the code works. buf[] can either be BUF_SIZE if this is called from sysfs, or it can be 16 if it's called from aac_get_adapter_info() via aac_get_serial_number(). We use the smaller limit here. sizeof(dev->supplement_adapter_info.MfgPcbaSerialNo) is 12 so there is actually no chance of hitting either limit. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Achim Leubner <Achim_Leubner@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-19net: add skb frag size accessorsEric Dumazet2-6/+6
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-16[SCSI] lpfc 8.3.27: Change driver version to 8.3.27James Smart1-1/+1
Change driver version to 8.3.27 Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: T10 additions for SLI4James Smart5-19/+471
Added T10 DIFF error injection code. Added T10 DIFF structure definitions for SLI4 devices. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: Fix queue allocation failure recoveryJames Smart3-67/+118
Fix queue allocation failure recovery - Move the allocation of the Queues closer to the creation of the queues. - If there is a problem with creation, or if the HBA is reset, the queues will be completely freed and re allocated. - Only allocate fcp_eq_hdl if cfg_fcp_eq_count is non-zero. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: Change algorithm for getting physical port nameJames Smart4-6/+366
Implemented new algorithm for getting physical port name for all SLI4 devices Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: Changed worst case mailbox timeoutJames Smart8-136/+229
Changed the timeout value for flash-based SLI_CONFIG (0x9B) mailbox command to 300 seconds for worst case flash delays. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: Miscellanous logic and interface fixesJames Smart11-57/+143
Miscellanous logic and interface fixes - Fix lpfc_init_vfi_cmpl to check the interface type for interface type 0 before parsing the results. - Cast uint32_t values that are multiplied to uint64_t before the multiplication. - Instead of "break" statement when PCI read returned error, use the goto statement to the end of the routine after setting return value - moved the msleep(10) to the beginning of the wait loop for checking the SLIPort_Status register - Added the code to follow the existing wait for SLIPort_Status register RDY, ERR, and RN bits to be set by the port before proceeding to perform PCI function reset. - Do not override ulpCt_h and ulpCt_l for SLI 4 ports. - For vport delete, call lpfc_nlp_put when the vport's vpi state is not marked with VPI_REGISTERED. - Added missed fields into the driver's Controller Attributes Structure - Changed ringing EQ/CQ/RQ doorbell register to be dependent on the size of the queue. - Return -EACCES in issue_reset if cfg_enable_hba_reset is zero. - Added new logging flag LOG_FCP_UNDER 0x00040000 to qualify underrun logging. - Add a check in the fabric name display routine to display 0 if the port state is <= FLOGI. - Add a check to the switch statement in lpfc_decode_firmware_rev to check for an 'X'. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Changelog and version updateadam radford2-4/+4
The following patch for megaraid_sas updates the ChangeLog.megaraid_sas file and updates the driver version. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panicadam radford2-1/+19
The following patch for megaraid_sas adds a driver workaround for PERC5/1068 based controller FW that keeps a command from the main kernel that the driver cannot cancel which was causing a kernel panic in shutdown of the kdump kernel. Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue supportadam radford4-59/+176
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllersadam radford5-40/+139
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interruptsadam radford1-0/+3
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Clear state change interruptsadam radford1-1/+8
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Remove some unnecessary codeadam radford1-13/+0
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Fix mismatch in megasas_reset_fusion() mutex lock-unlockadam radford1-2/+1
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Increase default cmds per lun to 256adam radford1-1/+1
Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] megaraid_sas: Continue booting immediately if FW in FAULT at driver ↵adam radford2-11/+13
load time Signed-off-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] qla4xxx: Update driver version to 5.02.00-k8Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] qla4xxx: updated device id check for BFS.Manish Rangankar1-5/+3
JIRA Key: UPSISCSI-75 Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] qla4xxx: Fixed target discovery failed issue.Manish Rangankar3-5/+7
When sendtargets response is greater then max receive data segment length, the passthrough IOCB failed with data overrun status. Solution is to allocate space for iSCSI header in the IOCB response buffer. JIRA Key: UPSISCSI-147 Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] qla4xxx: Fixed active session re-open issue.Manish Rangankar1-1/+5
When iscsid restarted for an existing active session, set DDB will fail with status already logged in. In this case, we have to send logged in event to iscsid. JIRA Key: OPENISCSI-21 Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] qla4xxx: Fixed device blocked issue on link up-down.Manish Rangankar2-1/+2
Devices are getting blocked during continuous link up and down. Solution is, during relogin unblock the session, using iscsi_conn_start, before sending connection logged in event. JIRA Key: UPSISCSI-138 Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] qla4xxx: Fixed session destroy issue on link up-down.Manish Rangankar2-1/+21
During link down, iscsid tries to do re-login to failed session. In case of link down-up-down, LLD was sending connection login failed event to iscsid, which is destroying the session, instead we have to continue re-login by sending connection err event. JIRA Key: UPSISCSI-134 Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] qla4xxx: Clear DDB map index on the basis of AEN.Manish Rangankar2-9/+14
Unable to login to session if login-logout issued consecutively for multiple sessions. Solution is to clear idx in DDB map on the basis of no-active connection asynchronous event (AEN). JIRA Key: UPSISCSI-135 Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] qla4xxx: Free Device Database (DDB) reserved by FWLalit Chandivade1-0/+40
Firmware reserves DDBs if there are entries in the FLASH. So there are no free DDBs left when a iSCSI login is initiated by user space tool like iscsiadm. Since now login is not controlled by firmware, LLD need to free up the DDBs after firmware init. This will ensure free DDBs are available for iSCSI logins using iscsiadm. JIRA Key: UPSISCSI-151 Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] qla4xxx: Fix getting BIDI CHAP for boot targetsLalit Chandivade1-4/+58
If a boot target has a BIDI CHAP enabled, then read the user/secret from CHAP table. Do not assume BIDI chap at peer CHAP index + 1 JIRA Key: UPSISCSI-156 Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] qla4xxx: Fix exporting boot targets to sysfsLalit Chandivade1-16/+21
The driver failed to export primary boot target if secondary target did not exist in the FLASH. If boot targets are not valid then driver assumed 0 and 1 as default boot targets. Since these target did not exist in flash, the driver failed exporting all the targets. JIRA Key: UPSISCSI-148 Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] qla4xxx: Do not add duplicate CHAP entry in FLASHLalit Chandivade5-35/+195
QLogic applications store the CHAP information in FLASH. During login, authentication information is provided using an index into the CHAP region. In order to support QLogic applications along with iscsiadm, updated the LLD to not add duplicate CHAP entries in the CHAP region and preserve the existing CHAP info in the CHAP region in FLASH. This allows QLogic applications to pre-write the CHAP entries in the CHAP region. With iscsiadm, when the CHAP authentication information is sent to the LLD, the LLD searches for the entry in CHAP region in FLASH, if exists then do not add. If CHAP entry does not exist then add the CHAP entry in the CHAP region. JIRA Key: UPSISCSI-146 Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] qla4xxx: Fix bidirectional CHAP.Lalit Chandivade2-3/+6
Driver was not setting the bidirectional CHAP bit correctly in the DDB entry. JIRA Key: UPSISCSI-108 Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] qla4xxx: Add new FLT firmware regionNilesh Javali2-0/+2
Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] be2iscsi: Move driver Version to 4.1.239.0Jayamohan Kallickal1-1/+1
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] be2iscsi: memset wrb for ring createJayamohan Kallickal1-0/+1
This patch fixes a situation when wrb was not being memset to zero before being used Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] be2iscsi: Fix for case where task->sc was cleanedup earlierJayamohan Kallickal1-0/+5
This patch fixes a bug where the task->sc was cleaned up earlier on a different thread, possibly abort, and the completion comes later. This was causing a crash which has been reported in multiple places Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] be2iscsi: Fix for wrong dmsg setting in wrbJayamohan Kallickal1-2/+2
This patch fixes wrong dmsg setting when we send out wrb. If the ttt is not ISCSI_RESERVED_TAG then we should be setting dmsg=1 so that the completion is done without waiting for a iscsi level response from the target Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 03:57:55 +0000