summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/xen-scsifront.c
AgeCommit message (Collapse)AuthorFilesLines
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2018-12-18scsi: xen-scsifront: remove DISABLE_CLUSTERINGChristoph Hellwig1-1/+0
There is no such limitation in the protocol or implementation, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28scsi: xen-scsifront: mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that, in this particular case, I replaced "Missed the backend's Closing state -- fallthrough" with "fall through - Missed the backend's Closing state", which contains the "fall through" annotation at the beginnig of the code comment, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: xen-scsifront: add error handling for xenbus_printfZhouyang Jia1-7/+26
When xenbus_printf fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling xenbus_printf. Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-06-12scsi: xen-scsifront: Remove code that zeroes driver-private command dataBart Van Assche1-1/+0
Since the SCSI core zeroes driver-private command data, remove that code from the xen-scsifront driver. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: xen-devel@lists.xenproject.org Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-02xen/scsifront: use offset_in_page() macroGeliang Tang1-1/+1
Use offset_in_page() macro instead of open-coding. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2016-12-09xen/scsifront: don't request a slot on the ring until request is readyJuergen Gross1-105/+83
Instead of requesting a new slot on the ring to the backend early, do so only after all has been setup for the request to be sent. This makes error handling easier as we don't need to undo the request id allocation and ring slot allocation. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2016-11-24xen-scsifront: Add a missing call to kfreeQuentin Lambert1-0/+1
Most error branches following the call to kmalloc contain a call to kfree. This patch add these calls where they are missing. This issue was found with Hector. Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2016-11-07xen: make use of xenbus_read_unsigned() in xen-scsifrontJuergen Gross1-5/+1
Use xenbus_read_unsigned() instead of xenbus_scanf() when possible. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08xen: Use correctly the Xen memory terminologiesJulien Grall1-5/+5
Based on include/xen/mm.h [1], Linux is mistakenly using MFN when GFN is meant, I suspect this is because the first support for Xen was for PV. This resulted in some misimplementation of helpers on ARM and confused developers about the expected behavior. For instance, with pfn_to_mfn, we expect to get an MFN based on the name. Although, if we look at the implementation on x86, it's returning a GFN. For clarity and avoid new confusion, replace any reference to mfn with gfn in any helpers used by PV drivers. The x86 code will still keep some reference of pfn_to_mfn which may be used by all kind of guests No changes as been made in the hypercall field, even though they may be invalid, in order to keep the same as the defintion in xen repo. Note that page_to_mfn has been renamed to xen_page_to_gfn to avoid a name to close to the KVM function gfn_to_page. Take also the opportunity to simplify simple construction such as pfn_to_mfn(page_to_pfn(page)) into xen_page_to_gfn. More complex clean up will come in follow-up patches. [1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=e758ed14f390342513405dd766e874934573e6cb Signed-off-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-04-15xenbus_client: Extend interface to support multi-page ringWei Liu1-2/+3
Originally Xen PV drivers only use single-page ring to pass along information. This might limit the throughput between frontend and backend. The patch extends Xenbus driver to support multi-page ring, which in general should improve throughput if ring is the bottleneck. Changes to various frontend / backend to adapt to the new interface are also included. Affected Xen drivers: * blkfront/back * netfront/back * pcifront/back * scsifront/back * vtpmfront The interface is documented, as before, in xenbus_client.c. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Bob Liu <bob.liu@oracle.com> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-03-16xen: support suspend/resume in pvscsi frontendJuergen Gross1-35/+179
Up to now the pvscsi frontend hasn't supported domain suspend and resume. When a domain with an assigned pvscsi device was suspended and resumed again, it was not able to use the device any more: trying to do so resulted in hanging processes. Support suspend and resume of pvscsi devices. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-10-06xen: remove DEFINE_XENBUS_DRIVER() macroDavid Vrabel1-2/+3
The DEFINE_XENBUS_DRIVER() macro looks a bit weird and causes sparse errors. Replace the uses with standard structure definitions instead. This is similar to pci and usb device registration. Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-10-03xen-scsifront: don't deadlock if the ring becomes fullDavid Vrabel1-1/+2
scsifront_action_handler() will deadlock on host->host_lock, if the ring is full and it has to wait for entries to become available. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com>
2014-09-23xen-scsifront: use GFP_ATOMIC under spin_lockDan Carpenter1-1/+1
This function is only called with a spin_lock held and IRQs disabled. The allocation is not allowed to sleep and NOIO is not sufficient, it has to be ATOMIC. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-09-23xen-scsifront: Add Xen PV SCSI frontend driverJuergen Gross1-0/+1024
Introduces the Xen pvSCSI frontend. With pvSCSI it is possible for a Xen domU to issue SCSI commands to a SCSI LUN assigned to that domU. The SCSI commands are passed to the pvSCSI backend in a driver domain (usually Dom0) which is owner of the physical device. This allows e.g. to use SCSI tape drives in a Xen domU. The code is taken from the pvSCSI implementation in Xen done by Fujitsu based on Linux kernel 2.6.18. Changes from the original version are: - port to upstream kernel - put all code in just one source file - move module to appropriate location in kernel tree - adapt to Linux style guide - some minor code simplifications - replace constants with defines - remove not used defines - add support for larger SG lists by putting them in a granted page Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 22:50:26 +0000